From: Vinod Koul <vkoul@kernel.org>
To: Inochi Amaoto <inochiama@outlook.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Chen Wang <unicorn_wang@outlook.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Jisheng Zhang <jszhang@kernel.org>,
Liu Gui <kenneth.liu@sophgo.com>,
Jingbao Qiu <qiujingbao.dlmu@gmail.com>,
dlan@gentoo.org, dmaengine@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org
Subject: Re: [PATCH v6 2/3] soc/sophgo: add top sysctrl layout file for CV18XX/SG200X
Date: Sun, 7 Apr 2024 16:53:10 +0530 [thread overview]
Message-ID: <ZhKCHlAYxnhhcKnt@matsya> (raw)
In-Reply-To: <IA1PR20MB49532FB358A842A2ACC5E878BB3A2@IA1PR20MB4953.namprd20.prod.outlook.com>
On 29-03-24, 10:04, Inochi Amaoto wrote:
> The "top" system controller of CV18XX/SG200X exposes control
> register access for various devices. Add soc header file to
> describe it.
>
> Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
> ---
> include/soc/sophgo/cv1800-sysctl.h | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 include/soc/sophgo/cv1800-sysctl.h
>
> diff --git a/include/soc/sophgo/cv1800-sysctl.h b/include/soc/sophgo/cv1800-sysctl.h
> new file mode 100644
> index 000000000000..b9396d33e240
> --- /dev/null
> +++ b/include/soc/sophgo/cv1800-sysctl.h
> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
> + */
> +
> +#ifndef CV1800_SYSCTL_H
> +#define CV1800_SYSCTL_H
> +
> +/*
> + * SOPHGO CV1800/SG2000 SoC top system controller registers offsets.
> + */
> +
> +#define CV1800_CONF_INFO 0x004
> +#define CV1800_SYS_CTRL_REG 0x008
> +#define CV1800_USB_PHY_CTRL_REG 0x048
> +#define CV1800_SDMA_DMA_CHANNEL_REMAP0 0x154
> +#define CV1800_SDMA_DMA_CHANNEL_REMAP1 0x158
> +#define CV1800_TOP_TIMER_CLK_SEL 0x1a0
> +#define CV1800_TOP_WDT_CTRL 0x1a8
> +#define CV1800_DDR_AXI_URGENT_OW 0x1b8
> +#define CV1800_DDR_AXI_URGENT 0x1bc
> +#define CV1800_DDR_AXI_QOS_0 0x1d8
> +#define CV1800_DDR_AXI_QOS_1 0x1dc
> +#define CV1800_SD_PWRSW_CTRL 0x1f4
> +#define CV1800_SD_PWRSW_TIME 0x1f8
> +#define CV1800_DDR_AXI_QOS_OW 0x23c
> +#define CV1800_SD_CTRL_OPT 0x294
> +#define CV1800_SDMA_DMA_INT_MUX 0x298
Why are these register defines in soc, all the dma registers should
belong to dma driver and other IPs, why do you need a common header??
--
~Vinod
WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Inochi Amaoto <inochiama@outlook.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Chen Wang <unicorn_wang@outlook.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Jisheng Zhang <jszhang@kernel.org>,
Liu Gui <kenneth.liu@sophgo.com>,
Jingbao Qiu <qiujingbao.dlmu@gmail.com>,
dlan@gentoo.org, dmaengine@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org
Subject: Re: [PATCH v6 2/3] soc/sophgo: add top sysctrl layout file for CV18XX/SG200X
Date: Sun, 7 Apr 2024 16:53:10 +0530 [thread overview]
Message-ID: <ZhKCHlAYxnhhcKnt@matsya> (raw)
In-Reply-To: <IA1PR20MB49532FB358A842A2ACC5E878BB3A2@IA1PR20MB4953.namprd20.prod.outlook.com>
On 29-03-24, 10:04, Inochi Amaoto wrote:
> The "top" system controller of CV18XX/SG200X exposes control
> register access for various devices. Add soc header file to
> describe it.
>
> Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
> ---
> include/soc/sophgo/cv1800-sysctl.h | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 include/soc/sophgo/cv1800-sysctl.h
>
> diff --git a/include/soc/sophgo/cv1800-sysctl.h b/include/soc/sophgo/cv1800-sysctl.h
> new file mode 100644
> index 000000000000..b9396d33e240
> --- /dev/null
> +++ b/include/soc/sophgo/cv1800-sysctl.h
> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
> + */
> +
> +#ifndef CV1800_SYSCTL_H
> +#define CV1800_SYSCTL_H
> +
> +/*
> + * SOPHGO CV1800/SG2000 SoC top system controller registers offsets.
> + */
> +
> +#define CV1800_CONF_INFO 0x004
> +#define CV1800_SYS_CTRL_REG 0x008
> +#define CV1800_USB_PHY_CTRL_REG 0x048
> +#define CV1800_SDMA_DMA_CHANNEL_REMAP0 0x154
> +#define CV1800_SDMA_DMA_CHANNEL_REMAP1 0x158
> +#define CV1800_TOP_TIMER_CLK_SEL 0x1a0
> +#define CV1800_TOP_WDT_CTRL 0x1a8
> +#define CV1800_DDR_AXI_URGENT_OW 0x1b8
> +#define CV1800_DDR_AXI_URGENT 0x1bc
> +#define CV1800_DDR_AXI_QOS_0 0x1d8
> +#define CV1800_DDR_AXI_QOS_1 0x1dc
> +#define CV1800_SD_PWRSW_CTRL 0x1f4
> +#define CV1800_SD_PWRSW_TIME 0x1f8
> +#define CV1800_DDR_AXI_QOS_OW 0x23c
> +#define CV1800_SD_CTRL_OPT 0x294
> +#define CV1800_SDMA_DMA_INT_MUX 0x298
Why are these register defines in soc, all the dma registers should
belong to dma driver and other IPs, why do you need a common header??
--
~Vinod
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2024-04-07 11:23 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-29 2:03 [PATCH v6 0/3] riscv: sophgo: add dmamux support for Sophgo CV1800/SG2000 SoCs Inochi Amaoto
2024-03-29 2:03 ` Inochi Amaoto
2024-03-29 2:04 ` [PATCH v6 1/3] dt-bindings: dmaengine: Add dma multiplexer for CV18XX/SG200X series SoC Inochi Amaoto
2024-03-29 2:04 ` Inochi Amaoto
2024-03-30 18:17 ` Krzysztof Kozlowski
2024-03-30 18:17 ` Krzysztof Kozlowski
2024-03-29 2:04 ` [PATCH v6 2/3] soc/sophgo: add top sysctrl layout file for CV18XX/SG200X Inochi Amaoto
2024-03-29 2:04 ` Inochi Amaoto
2024-04-07 11:23 ` Vinod Koul [this message]
2024-04-07 11:23 ` Vinod Koul
2024-04-07 11:36 ` Inochi Amaoto
2024-04-07 11:36 ` Inochi Amaoto
2024-03-29 2:04 ` [PATCH v6 3/3] dmaengine: add driver for Sophgo CV18XX/SG200X dmamux Inochi Amaoto
2024-03-29 2:04 ` Inochi Amaoto
2024-04-07 11:29 ` Vinod Koul
2024-04-07 11:29 ` Vinod Koul
2024-04-07 11:57 ` Inochi Amaoto
2024-04-07 11:57 ` Inochi Amaoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZhKCHlAYxnhhcKnt@matsya \
--to=vkoul@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlan@gentoo.org \
--cc=dmaengine@vger.kernel.org \
--cc=inochiama@outlook.com \
--cc=jszhang@kernel.org \
--cc=kenneth.liu@sophgo.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=qiujingbao.dlmu@gmail.com \
--cc=robh@kernel.org \
--cc=unicorn_wang@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.