All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: Neal Frager <neal.frager@amd.com>
Cc: ibai.erkiaga-elorza@amd.com, luca.ceresoli@bootlin.com,
	brandon.maier@collins.com, thomas.petazzoni@bootlin.com,
	buildroot@buildroot.org, michal.simek@amd.com
Subject: Re: [Buildroot] [PATCH v2 1/5] boot/xilinx-prebuilt: new boot package
Date: Sat, 15 Jun 2024 23:20:55 +0200	[thread overview]
Message-ID: <Zm4Ft5PR4_akSiW2@landeda> (raw)
In-Reply-To: <20240613061423.1737631-1-neal.frager@amd.com>

Neal, All,

On 2024-06-13 07:14 +0100, Neal Frager via buildroot spake thusly:
> This patch add a new boot package for downloading prebuilt firmware for Xilinx
> versal and zynqmp evaluation boards.
> 
> It solves the problem of being able to verify the hash when downloading a
> prebuilt zynqmp pmufw.elf binary.

Yes, this is a good move, thanks! 👍

> Signed-off-by: Neal Frager <neal.frager@amd.com>

Applied to master, after doing a few tweaks:

  - move the hash file to the package dir, not the board dir
  - move board name after familly choice
  - add default board name for each family
  - qstrip the Kconfig strings before use
  - introduce XILINX_PREBUILT_BOARD_DIR to simplify paths
  - explain the *.pdi glob
  - simplify non-versal install

Thank you!

Regards,
Yann E. MORIN.

> ---
> V1->V2:
> - no changes
> ---
>  DEVELOPERS                                    |  2 +
>  .../xilinx-prebuilt/xilinx-prebuilt.hash      |  2 +
>  boot/Config.in                                |  1 +
>  boot/xilinx-prebuilt/Config.in                | 40 +++++++++++++++++++
>  boot/xilinx-prebuilt/xilinx-prebuilt.mk       | 39 ++++++++++++++++++
>  5 files changed, 84 insertions(+)
>  create mode 100644 board/xilinx/patches/xilinx-prebuilt/xilinx-prebuilt.hash
>  create mode 100644 boot/xilinx-prebuilt/Config.in
>  create mode 100644 boot/xilinx-prebuilt/xilinx-prebuilt.mk
> 
> diff --git a/DEVELOPERS b/DEVELOPERS
> index cf48e01037..93627a0064 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -2335,8 +2335,10 @@ F:	package/qt5/qt5opcua/
>  
>  N:	Neal Frager <neal.frager@amd.com>
>  F:	board/versal/
> +F:	board/xilinx/
>  F:	board/zynq/
>  F:	board/zynqmp/
> +F:	boot/xilinx-prebuilt/
>  F:	configs/versal_vck190_defconfig
>  F:	configs/zynq_zc702_defconfig
>  F:	configs/zynq_zc706_defconfig
> diff --git a/board/xilinx/patches/xilinx-prebuilt/xilinx-prebuilt.hash b/board/xilinx/patches/xilinx-prebuilt/xilinx-prebuilt.hash
> new file mode 100644
> index 0000000000..c955cd79f5
> --- /dev/null
> +++ b/board/xilinx/patches/xilinx-prebuilt/xilinx-prebuilt.hash
> @@ -0,0 +1,2 @@
> +# Locally calculated
> +sha256  7abcba4e0e44e3a4adf9c1f971d918575226d7604dfd64a386baaa00c1c6c35f  xilinx-prebuilt-xilinx_v2024.1.tar.gz
> diff --git a/boot/Config.in b/boot/Config.in
> index 87e1b7c00e..1378a04d19 100644
> --- a/boot/Config.in
> +++ b/boot/Config.in
> @@ -23,5 +23,6 @@ source "boot/ti-k3-boot-firmware/Config.in"
>  source "boot/ti-k3-r5-loader/Config.in"
>  source "boot/uboot/Config.in"
>  source "boot/vexpress-firmware/Config.in"
> +source "boot/xilinx-prebuilt/Config.in"
>  
>  endmenu
> diff --git a/boot/xilinx-prebuilt/Config.in b/boot/xilinx-prebuilt/Config.in
> new file mode 100644
> index 0000000000..ec38e41993
> --- /dev/null
> +++ b/boot/xilinx-prebuilt/Config.in
> @@ -0,0 +1,40 @@
> +config BR2_TARGET_XILINX_PREBUILT
> +	bool "xilinx-prebuilt"
> +	depends on BR2_aarch64
> +	help
> +	  Pre-built firmware files for Xilinx boards.
> +
> +	  https://github.com/Xilinx/soc-prebuilt-firmware
> +
> +if BR2_TARGET_XILINX_PREBUILT
> +
> +config BR2_TARGET_XILINX_PREBUILT_VERSION
> +	string "prebuilt version"
> +	default "xilinx_v2024.1"
> +	help
> +	  Release version of Xilinx firmware.
> +	  Must be xilinx_v2023.1 or newer.
> +
> +config BR2_TARGET_XILINX_PREBUILT_BOARD
> +	string "board name"
> +	default "zcu102"
> +	help
> +	  Name of Xilinx target board.
> +	  Used for installing the appropriate firmware.
> +
> +choice
> +	bool "family variant"
> +	default BR2_TARGET_XILINX_PREBUILT_ZYNQMP
> +
> +config BR2_TARGET_XILINX_PREBUILT_ZYNQMP
> +	bool "zynqmp"
> +
> +config BR2_TARGET_XILINX_PREBUILT_KRIA
> +	bool "kria"
> +
> +config BR2_TARGET_XILINX_PREBUILT_VERSAL
> +	bool "versal"
> +
> +endchoice
> +
> +endif # BR2_TARGET_XILINX_PREBUILT
> diff --git a/boot/xilinx-prebuilt/xilinx-prebuilt.mk b/boot/xilinx-prebuilt/xilinx-prebuilt.mk
> new file mode 100644
> index 0000000000..98dd18da0d
> --- /dev/null
> +++ b/boot/xilinx-prebuilt/xilinx-prebuilt.mk
> @@ -0,0 +1,39 @@
> +################################################################################
> +#
> +# xilinx-prebuilt
> +#
> +################################################################################
> +
> +XILINX_PREBUILT_VERSION = $(call qstrip,$(BR2_TARGET_XILINX_PREBUILT_VERSION))
> +XILINX_PREBUILT_SITE = $(call github,Xilinx,soc-prebuilt-firmware,$(XILINX_PREBUILT_VERSION))
> +XILINX_PREBUILT_LICENSE = MIT
> +XILINX_PREBUILT_LICENSE_FILES = LICENSE
> +XILINX_PREBUILT_INSTALL_TARGET = NO
> +XILINX_PREBUILT_INSTALL_IMAGES = YES
> +
> +ifeq ($(BR2_TARGET_XILINX_PREBUILT_VERSAL),y)
> +define XILINX_PREBUILT_INSTALL_IMAGES_CMDS
> +	$(INSTALL) -D -m 0755 $(@D)/$(BR2_TARGET_XILINX_PREBUILT_BOARD)-versal/plm.elf \
> +		$(BINARIES_DIR)/plm.elf
> +	$(INSTALL) -D -m 0755 $(@D)/$(BR2_TARGET_XILINX_PREBUILT_BOARD)-versal/psmfw.elf \
> +		$(BINARIES_DIR)/psmfw.elf
> +	$(INSTALL) -D -m 0755 $(@D)/$(BR2_TARGET_XILINX_PREBUILT_BOARD)-versal/*.pdi \
> +		$(BINARIES_DIR)/vpl_gen_fixed.pdi
> +endef
> +endif #BR2_TARGET_XILINX_PREBUILT_VERSAL
> +
> +ifeq ($(BR2_TARGET_XILINX_PREBUILT_ZYNQMP),y)
> +define XILINX_PREBUILT_INSTALL_IMAGES_CMDS
> +	$(INSTALL) -D -m 0755 $(@D)/$(BR2_TARGET_XILINX_PREBUILT_BOARD)-zynqmp/pmufw.elf \
> +		$(BINARIES_DIR)/pmufw.elf
> +endef
> +endif #BR2_TARGET_XILINX_PREBUILT_ZYNQMP
> +
> +ifeq ($(BR2_TARGET_XILINX_PREBUILT_KRIA),y)
> +define XILINX_PREBUILT_INSTALL_IMAGES_CMDS
> +	$(INSTALL) -D -m 0755 $(@D)/$(BR2_TARGET_XILINX_PREBUILT_BOARD)-kria/pmufw.elf \
> +		$(BINARIES_DIR)/pmufw.elf
> +endef
> +endif #BR2_TARGET_XILINX_PREBUILT_KRIA
> +
> +$(eval $(generic-package))
> -- 
> 2.25.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

      parent reply	other threads:[~2024-06-15 21:21 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-13  6:14 [Buildroot] [PATCH v2 1/5] boot/xilinx-prebuilt: new boot package Neal Frager via buildroot
2024-06-13  6:14 ` [Buildroot] [PATCH v2 2/5] boot/uboot.mk: new zynqmp pmufw prebuilt option Neal Frager via buildroot
2024-06-13 12:33   ` Brandon Maier via buildroot
2024-06-15 21:23   ` Yann E. MORIN
2024-06-13  6:14 ` [Buildroot] [PATCH v2 3/5] configs/zynqmp_*: migrate to xilinx-prebuilt Neal Frager via buildroot
2024-06-13 12:33   ` Brandon Maier via buildroot
2024-06-15 21:24   ` Yann E. MORIN
2024-06-13  6:14 ` [Buildroot] [PATCH v2 4/5] configs/versal_vck190_defconfig: " Neal Frager via buildroot
2024-06-13 12:33   ` Brandon Maier via buildroot
2024-06-15 21:25   ` Yann E. MORIN
2024-06-13  6:14 ` [Buildroot] [PATCH v2 5/5] package/versal-firmware: remove package Neal Frager via buildroot
2024-06-13 12:33   ` Brandon Maier via buildroot
2024-06-15 21:25   ` Yann E. MORIN
2024-06-13 12:32 ` [Buildroot] [PATCH v2 1/5] boot/xilinx-prebuilt: new boot package Brandon Maier via buildroot
2024-06-15 21:20 ` Yann E. MORIN [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zm4Ft5PR4_akSiW2@landeda \
    --to=yann.morin.1998@free.fr \
    --cc=brandon.maier@collins.com \
    --cc=buildroot@buildroot.org \
    --cc=ibai.erkiaga-elorza@amd.com \
    --cc=luca.ceresoli@bootlin.com \
    --cc=michal.simek@amd.com \
    --cc=neal.frager@amd.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.