Re: [PATCH v7 2/2] hw/riscv/virt: Add IOPMP support

[Ethan Chen via <qemu-riscv@nongnu.org>]

Hi Alistair,

IOPMP can applies all device. In this patch series, PCI devices on the bridge 
can connect to IOPMP by pci_setup_iommu(), but other devices need change their
memory access address space from system memory to IOPMP by themself.

Thanks,
Ethan

On Fri, Jun 21, 2024 at 03:54:15PM +1000, Alistair Francis wrote:
> On Wed, Jun 12, 2024 at 1:25 PM Ethan Chen via <qemu-devel@nongnu.org> wrote:
> >
> > If a requestor device is connected to the IOPMP device, its memory access will
> > be checked by the IOPMP rule.
> >
> > - Add 'iopmp=on' option to add an iopmp device and make the Generic PCI Express
> >   Bridge connect to IOPMP.
> 
> I have only had a chance to have a quick look at this series and the spec.
> 
> But the IOPMP spec applies to all devices right, but this series seems
> to only work with PCI. Am I missing something?
> 
> Alistair
> 
> >
> > Signed-off-by: Ethan Chen <ethan84@andestech.com>
> > ---
> >  docs/system/riscv/virt.rst |  6 ++++
> >  hw/riscv/Kconfig           |  1 +
> >  hw/riscv/virt.c            | 57 ++++++++++++++++++++++++++++++++++++--
> >  include/hw/riscv/virt.h    |  5 +++-
> >  4 files changed, 66 insertions(+), 3 deletions(-)
> >
> > diff --git a/docs/system/riscv/virt.rst b/docs/system/riscv/virt.rst
> > index 9a06f95a34..3b2576f905 100644
> > --- a/docs/system/riscv/virt.rst
> > +++ b/docs/system/riscv/virt.rst
> > @@ -116,6 +116,12 @@ The following machine-specific options are supported:
> >    having AIA IMSIC (i.e. "aia=aplic-imsic" selected). When not specified,
> >    the default number of per-HART VS-level AIA IMSIC pages is 0.
> >
> > +- iopmp=[on|off]
> > +
> > +  When this option is "on", an IOPMP device is added to machine. It checks dma
> > +  operations from the generic PCIe host bridge. This option is assumed to be
> > +  "off".
> > +
> >  Running Linux kernel
> >  --------------------
> >
> > diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
> > index a2030e3a6f..0b45a5ade2 100644
> > --- a/hw/riscv/Kconfig
> > +++ b/hw/riscv/Kconfig
> > @@ -56,6 +56,7 @@ config RISCV_VIRT
> >      select PLATFORM_BUS
> >      select ACPI
> >      select ACPI_PCI
> > +    select RISCV_IOPMP
> >
> >  config SHAKTI_C
> >      bool
> > diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
> > index 4fdb660525..53a1b71c71 100644
> > --- a/hw/riscv/virt.c
> > +++ b/hw/riscv/virt.c
> > @@ -55,6 +55,7 @@
> >  #include "hw/acpi/aml-build.h"
> >  #include "qapi/qapi-visit-common.h"
> >  #include "hw/virtio/virtio-iommu.h"
> > +#include "hw/misc/riscv_iopmp.h"
> >
> >  /* KVM AIA only supports APLIC MSI. APLIC Wired is always emulated by QEMU. */
> >  static bool virt_use_kvm_aia(RISCVVirtState *s)
> > @@ -82,6 +83,7 @@ static const MemMapEntry virt_memmap[] = {
> >      [VIRT_UART0] =        { 0x10000000,         0x100 },
> >      [VIRT_VIRTIO] =       { 0x10001000,        0x1000 },
> >      [VIRT_FW_CFG] =       { 0x10100000,          0x18 },
> > +    [VIRT_IOPMP] =        { 0x10200000,      0x100000 },
> >      [VIRT_FLASH] =        { 0x20000000,     0x4000000 },
> >      [VIRT_IMSIC_M] =      { 0x24000000, VIRT_IMSIC_MAX_SIZE },
> >      [VIRT_IMSIC_S] =      { 0x28000000, VIRT_IMSIC_MAX_SIZE },
> > @@ -1006,6 +1008,24 @@ static void create_fdt_virtio_iommu(RISCVVirtState *s, uint16_t bdf)
> >                             bdf + 1, iommu_phandle, bdf + 1, 0xffff - bdf);
> >  }
> >
> > +static void create_fdt_iopmp(RISCVVirtState *s, const MemMapEntry *memmap,
> > +                             uint32_t irq_mmio_phandle) {
> > +    g_autofree char *name = NULL;
> > +    MachineState *ms = MACHINE(s);
> > +
> > +    name = g_strdup_printf("/soc/iopmp@%lx", (long)memmap[VIRT_IOPMP].base);
> > +    qemu_fdt_add_subnode(ms->fdt, name);
> > +    qemu_fdt_setprop_string(ms->fdt, name, "compatible", "riscv_iopmp");
> > +    qemu_fdt_setprop_cells(ms->fdt, name, "reg", 0x0, memmap[VIRT_IOPMP].base,
> > +        0x0, memmap[VIRT_IOPMP].size);
> > +    qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_mmio_phandle);
> > +    if (s->aia_type == VIRT_AIA_TYPE_NONE) {
> > +        qemu_fdt_setprop_cell(ms->fdt, name, "interrupts", IOPMP_IRQ);
> > +    } else {
> > +        qemu_fdt_setprop_cells(ms->fdt, name, "interrupts", IOPMP_IRQ, 0x4);
> > +    }
> > +}
> > +
> >  static void finalize_fdt(RISCVVirtState *s)
> >  {
> >      uint32_t phandle = 1, irq_mmio_phandle = 1, msi_pcie_phandle = 1;
> > @@ -1024,6 +1044,10 @@ static void finalize_fdt(RISCVVirtState *s)
> >      create_fdt_uart(s, virt_memmap, irq_mmio_phandle);
> >
> >      create_fdt_rtc(s, virt_memmap, irq_mmio_phandle);
> > +
> > +    if (s->have_iopmp) {
> > +        create_fdt_iopmp(s, virt_memmap, irq_mmio_phandle);
> > +    }
> >  }
> >
> >  static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap)
> > @@ -1404,7 +1428,7 @@ static void virt_machine_init(MachineState *machine)
> >      RISCVVirtState *s = RISCV_VIRT_MACHINE(machine);
> >      MemoryRegion *system_memory = get_system_memory();
> >      MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
> > -    DeviceState *mmio_irqchip, *virtio_irqchip, *pcie_irqchip;
> > +    DeviceState *mmio_irqchip, *virtio_irqchip, *pcie_irqchip, *gpex_dev;
> >      int i, base_hartid, hart_count;
> >      int socket_count = riscv_socket_count(machine);
> >
> > @@ -1570,7 +1594,7 @@ static void virt_machine_init(MachineState *machine)
> >              qdev_get_gpio_in(virtio_irqchip, VIRTIO_IRQ + i));
> >      }
> >
> > -    gpex_pcie_init(system_memory, pcie_irqchip, s);
> > +    gpex_dev = gpex_pcie_init(system_memory, pcie_irqchip, s);
> >
> >      create_platform_bus(s, mmio_irqchip);
> >
> > @@ -1581,6 +1605,14 @@ static void virt_machine_init(MachineState *machine)
> >      sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base,
> >          qdev_get_gpio_in(mmio_irqchip, RTC_IRQ));
> >
> > +    if (s->have_iopmp) {
> > +        DeviceState *iopmp_dev = sysbus_create_simple(TYPE_IOPMP,
> > +            memmap[VIRT_IOPMP].base,
> > +            qdev_get_gpio_in(DEVICE(mmio_irqchip), IOPMP_IRQ));
> > +
> > +        iopmp_setup_pci(iopmp_dev, PCI_HOST_BRIDGE(gpex_dev)->bus);
> > +    }
> > +
> >      for (i = 0; i < ARRAY_SIZE(s->flash); i++) {
> >          /* Map legacy -drive if=pflash to machine properties */
> >          pflash_cfi01_legacy_drive(s->flash[i],
> > @@ -1684,6 +1716,21 @@ static void virt_set_aclint(Object *obj, bool value, Error **errp)
> >      s->have_aclint = value;
> >  }
> >
> > +static bool virt_get_iopmp(Object *obj, Error **errp)
> > +{
> > +    RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
> > +
> > +    return s->have_iopmp;
> > +}
> > +
> > +static void virt_set_iopmp(Object *obj, bool value, Error **errp)
> > +{
> > +    RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
> > +
> > +    s->have_iopmp = value;
> > +}
> > +
> > +
> >  bool virt_is_acpi_enabled(RISCVVirtState *s)
> >  {
> >      return s->acpi != ON_OFF_AUTO_OFF;
> > @@ -1794,6 +1841,12 @@ static void virt_machine_class_init(ObjectClass *oc, void *data)
> >                                NULL, NULL);
> >      object_class_property_set_description(oc, "acpi",
> >                                            "Enable ACPI");
> > +
> > +    object_class_property_add_bool(oc, "iopmp", virt_get_iopmp,
> > +                                   virt_set_iopmp);
> > +    object_class_property_set_description(oc, "iopmp",
> > +                                          "Set on/off to enable/disable "
> > +                                          "iopmp device");
> >  }
> >
> >  static const TypeInfo virt_machine_typeinfo = {
> > diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h
> > index 3db839160f..81460e29c4 100644
> > --- a/include/hw/riscv/virt.h
> > +++ b/include/hw/riscv/virt.h
> > @@ -55,6 +55,7 @@ struct RISCVVirtState {
> >
> >      int fdt_size;
> >      bool have_aclint;
> > +    bool have_iopmp;
> >      RISCVVirtAIAType aia_type;
> >      int aia_guests;
> >      char *oem_id;
> > @@ -84,12 +85,14 @@ enum {
> >      VIRT_PCIE_MMIO,
> >      VIRT_PCIE_PIO,
> >      VIRT_PLATFORM_BUS,
> > -    VIRT_PCIE_ECAM
> > +    VIRT_PCIE_ECAM,
> > +    VIRT_IOPMP,
> >  };
> >
> >  enum {
> >      UART0_IRQ = 10,
> >      RTC_IRQ = 11,
> > +    IOPMP_IRQ = 12,
> >      VIRTIO_IRQ = 1, /* 1 to 8 */
> >      VIRTIO_COUNT = 8,
> >      PCIE_IRQ = 0x20, /* 32 to 35 */
> > --
> > 2.34.1
> >
> >