[PATCH v4 0/8] arm64: dts: imx8qm: add subsystem lvds and mipi

[PATCH v4 0/8] arm64: dts: imx8qm: add subsystem lvds and mipi

[Frank Li]

Add subsystem lvds and mipi. Add pwm and i2c in lvds and mipi.
imx8qm-mek:
- add remove-proc
- fixed gpio number error for vmmc
- add usb3 and typec
- add pwm and i2c in lvds and mipi

DTB_CHECK warning fixed by seperate patches.
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: usb@5b110000: usb@5b120000: 'port', 'usb-role-switch' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml#
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: usb@5b120000: 'port', 'usb-role-switch' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/usb/cdns,usb3.yaml#

** binding fix patch:  https://lore.kernel.org/imx/20240606161509.3201080-1-Frank.Li@nxp.com/T/#u

arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: interrupt-controller@56240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#

** binding fix patch: https://lore.kernel.org/imx/20240528071141.92003-1-alexander.stein@ew.tq-group.com/T/#me3425d580ba9a086866c3053ef854810ac7a0ef6

arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: pwm@56244000: 'oneOf' conditional failed, one must be fixed:
	'interrupts' is a required property
	'interrupts-extended' is a required property
	from schema $id: http://devicetree.org/schemas/pwm/imx-pwm.yaml#

** binding fix patch: https://lore.kernel.org/imx/dc9accba-78af-45ec-a516-b89f2d4f4b03@kernel.org/T/#t 

	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: imx8qm-cm4-0: power-domains: [[15, 278], [15, 297]] is too short
	from schema $id: http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: imx8qm-cm4-1: power-domains: [[15, 298], [15, 317]] is too short

** binding fix patch: https://lore.kernel.org/imx/20240606150030.3067015-1-Frank.Li@nxp.com/T/#u

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v4:
- Fix kernel test robot warning. 
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406290945.3KbIuqTZ-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)>> arch/arm64/boot/dts/freescale/imx8qm-mek.dts:64.22-68.5: Warning (unit_address_vs_reg): /reserved-memory/memory: node has a reg or ranges property, but no unit name
- order node by address in reserved-memory.
- Link to v3: https://lore.kernel.org/r/20240614-imx8qm-dts-usb-v3-0-8ecc30678e1c@nxp.com

Changes in
- Add imx8qm-ss-mipi.dtsi to overwrite mipi lpcg clock setting
- Fixed order in imx8-ss-mipi0.dtsi
- lpcg arg0 have to use clock indices, insteand of index, so keep current change
- lvds1 and mipi1 keep current file name to algin exist naming conversion
- Link to v2: https://lore.kernel.org/r/20240610-imx8qm-dts-usb-v2-0-788417116fb1@nxp.com

Changes in v2:
    Changes in v2:
    - split common lvds and mipi part to seperate dtsi file.
    - num-interpolated-steps = <100>
    - irq-steer add "fsl,imx8qm-irqsteer"
    - using mux-controller
    - move address-cells common dtsi
- Link to v1: https://lore.kernel.org/r/20240606-imx8qm-dts-usb-v1-0-565721b64f25@nxp.com

---
Frank Li (8):
      arm64: dts: imx8: add basic lvds0 and lvds1 subsystem
      arm64: dts: imx8qm: add lvds subsystem
      arm64: dts: imx8: add basic mipi subsystem
      arm64: dts: imx8qm: add mipi subsystem
      arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region
      arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem
      arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem
      arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes

 arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi  |  63 +++++
 arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi  | 114 +++++++++
 arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi  | 130 ++++++++++
 arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi  | 138 +++++++++++
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts      | 278 ++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi |  77 ++++++
 arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi |  19 ++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi         |  27 +++
 8 files changed, 846 insertions(+)
---
base-commit: 9db27bc55bd8363570c5a259ff4dc77bd6a0b2cd
change-id: 20240606-imx8qm-dts-usb-9c55d2bfe526

Best regards,
---
Frank Li <Frank.Li@nxp.com>

[PATCH v4 1/8] arm64: dts: imx8: add basic lvds0 and lvds1 subsystem

[Frank Li]

Add basic lvds0 and lvds1 subsystem for imx8qm an imx8qxp.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi |  63 +++++++++++++
 arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi | 114 +++++++++++++++++++++++
 2 files changed, 177 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
new file mode 100644
index 0000000000000..d00036204a8c2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+lvds0_subsys: bus@56240000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x56240000 0x0 0x56240000 0x10000>;
+
+	qm_lvds0_lis_lpcg: qxp_mipi1_lis_lpcg: clock-controller@56243000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56243000 0x4>;
+		#clock-cells = <1>;
+		clock-output-names = "mipi1_lis_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1>;
+	};
+
+	qm_lvds0_pwm_lpcg: qxp_mipi1_pwm_lpcg: clock-controller@5624300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5624300c 0x4>;
+		#clock-cells = <1>;
+		clock-output-names = "mipi1_pwm_lpcg_clk",
+				     "mipi1_pwm_lpcg_ipg_clk",
+				     "mipi1_pwm_lpcg_32k_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+	};
+
+	qm_lvds0_i2c0_lpcg: qxp_mipi1_i2c0_lpcg: clock-controller@56243010 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56243010 0x4>;
+		#clock-cells = <1>;
+		clock-output-names = "mipi1_i2c0_lpcg_clk",
+				     "mipi1_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	qm_pwm_lvds0: qxp_pwm_mipi_lvds1: pwm@56244000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x56244000 0x1000>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+		status = "disabled";
+	};
+
+	qm_i2c0_lvds0: qxp_i2c0_mipi_lvds1: i2c@56246000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x56246000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi
new file mode 100644
index 0000000000000..12ae4f48e1e1c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+lvds1_subsys: bus@57240000 {
+	compatible = "simple-bus";
+	interrupt-parent = <&irqsteer_lvds1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x57240000 0x0 0x57240000 0x10000>;
+
+	irqsteer_lvds1: interrupt-controller@57240000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x57240000 0x1000>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&lvds1_lis_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_LVDS_1>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	lvds1_lis_lpcg: clock-controller@57243000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57243000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_lis_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1>;
+	};
+
+	lvds1_pwm_lpcg: clock-controller@5724300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5724300c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_pwm_lpcg_clk",
+				     "lvds1_pwm_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>;
+	};
+
+	lvds1_i2c0_lpcg: clock-controller@57243010 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57243010 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_i2c0_lpcg_clk",
+				     "lvds1_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+	};
+
+	lvds1_i2c1_lpcg: clock-controller@57243014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57243014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_i2c1_lpcg_clk",
+				     "lvds1_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+	};
+
+	pwm_lvds1: pwm@57244000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x57244000 0x1000>;
+		clocks = <&lvds1_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&lvds1_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>;
+		status = "disabled";
+	};
+
+	i2c0_lvds1: i2c@57246000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x57246000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		clocks = <&lvds1_i2c0_lpcg IMX_LPCG_CLK_0>,
+			 <&lvds1_i2c0_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+		status = "disabled";
+	};
+
+	i2c1_lvds1: i2c@57247000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x57247000 0x1000>;
+		interrupts = <9>;
+		clocks = <&lvds1_i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&lvds1_i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+		status = "disabled";
+	};
+};

-- 
2.34.1

[PATCH v4 2/8] arm64: dts: imx8qm: add lvds subsystem

[Frank Li]

Add irqsteer, pwm and i2c in lvds subsystem.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi | 77 +++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi         | 10 +++
 2 files changed, 87 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
new file mode 100644
index 0000000000000..1da3934847057
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2024 NXP
+ */
+
+&qm_lvds0_lis_lpcg {
+	clocks = <&lvds_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_4>;
+};
+
+&qm_lvds0_pwm_lpcg {
+	clocks = <&clk IMX_SC_R_LVDS_0_PWM_0 IMX_SC_PM_CLK_PER>,
+		 <&lvds_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+};
+
+&qm_lvds0_i2c0_lpcg {
+	clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
+		 <&lvds_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+};
+
+&qm_pwm_lvds0 {
+	clocks = <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_4>,
+		 <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_0>;
+};
+
+&qm_i2c0_lvds0 {
+	clocks = <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_0>,
+		 <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_4>;
+};
+
+&lvds0_subsys {
+	interrupt-parent = <&irqsteer_lvds0>;
+
+	irqsteer_lvds0: interrupt-controller@56240000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x56240000 0x1000>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&qm_lvds0_lis_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	lvds0_i2c1_lpcg: clock-controller@56243014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56243014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds0_i2c1_lpcg_clk",
+				     "lvds0_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
+	};
+
+	i2c1_lvds0: i2c@56247000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x56247000 0x1000>;
+		interrupts = <9>;
+		clocks = <&lvds0_i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&lvds0_i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
+		status = "disabled";
+	};
+};
+
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 61986e0639e53..1e8511e8d8577 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -560,11 +560,20 @@ clk_spdif1_rx: clock-spdif1-rx {
 		clock-output-names = "spdif1_rx";
 	};
 
+	lvds_ipg_clk: clock-controller-lvds-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "lvds0_ipg_clk";
+	};
+
 	/* sorted in register address */
 	#include "imx8-ss-cm41.dtsi"
 	#include "imx8-ss-audio.dtsi"
 	#include "imx8-ss-vpu.dtsi"
 	#include "imx8-ss-gpu0.dtsi"
+	#include "imx8-ss-lvds0.dtsi"
+	#include "imx8-ss-lvds1.dtsi"
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-dma.dtsi"
 	#include "imx8-ss-conn.dtsi"
@@ -576,3 +585,4 @@ clk_spdif1_rx: clock-spdif1-rx {
 #include "imx8qm-ss-conn.dtsi"
 #include "imx8qm-ss-lsio.dtsi"
 #include "imx8qm-ss-audio.dtsi"
+#include "imx8qm-ss-lvds.dtsi"

-- 
2.34.1

Re: [PATCH v4 2/8] arm64: dts: imx8qm: add lvds subsystem

[Shawn Guo]

On Mon, Jul 01, 2024 at 11:03:28AM -0400, Frank Li wrote:
> Add irqsteer, pwm and i2c in lvds subsystem.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi | 77 +++++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8qm.dtsi         | 10 +++
>  2 files changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
> new file mode 100644
> index 0000000000000..1da3934847057
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
> @@ -0,0 +1,77 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +&qm_lvds0_lis_lpcg {
> +	clocks = <&lvds_ipg_clk>;
> +	clock-indices = <IMX_LPCG_CLK_4>;
> +};
> +
> +&qm_lvds0_pwm_lpcg {
> +	clocks = <&clk IMX_SC_R_LVDS_0_PWM_0 IMX_SC_PM_CLK_PER>,
> +		 <&lvds_ipg_clk>;
> +	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> +};
> +
> +&qm_lvds0_i2c0_lpcg {
> +	clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
> +		 <&lvds_ipg_clk>;
> +	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> +};
> +
> +&qm_pwm_lvds0 {
> +	clocks = <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_4>,
> +		 <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_0>;
> +};
> +
> +&qm_i2c0_lvds0 {
> +	clocks = <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_0>,
> +		 <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_4>;
> +};
> +
> +&lvds0_subsys {
> +	interrupt-parent = <&irqsteer_lvds0>;
> +
> +	irqsteer_lvds0: interrupt-controller@56240000 {
> +		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";

Is compatible "fsl,imx8qm-irqsteer" documented in bindings?

Shawn

> +		reg = <0x56240000 0x1000>;
> +		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-controller;
> +		interrupt-parent = <&gic>;
> +		#interrupt-cells = <1>;
> +		clocks = <&qm_lvds0_lis_lpcg IMX_LPCG_CLK_4>;
> +		clock-names = "ipg";
> +		power-domains = <&pd IMX_SC_R_LVDS_0>;
> +
> +		fsl,channel = <0>;
> +		fsl,num-irqs = <32>;
> +	};
> +
> +	lvds0_i2c1_lpcg: clock-controller@56243014 {
> +		compatible = "fsl,imx8qxp-lpcg";
> +		reg = <0x56243014 0x4>;
> +		#clock-cells = <1>;
> +		clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
> +			 <&lvds_ipg_clk>;
> +		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> +		clock-output-names = "lvds0_i2c1_lpcg_clk",
> +				     "lvds0_i2c1_lpcg_ipg_clk";
> +		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
> +	};
> +
> +	i2c1_lvds0: i2c@56247000 {
> +		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
> +		reg = <0x56247000 0x1000>;
> +		interrupts = <9>;
> +		clocks = <&lvds0_i2c1_lpcg IMX_LPCG_CLK_0>,
> +			 <&lvds0_i2c1_lpcg IMX_LPCG_CLK_4>;
> +		clock-names = "per", "ipg";
> +		assigned-clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>;
> +		assigned-clock-rates = <24000000>;
> +		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
> +		status = "disabled";
> +	};
> +};
> +
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> index 61986e0639e53..1e8511e8d8577 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> @@ -560,11 +560,20 @@ clk_spdif1_rx: clock-spdif1-rx {
>  		clock-output-names = "spdif1_rx";
>  	};
>  
> +	lvds_ipg_clk: clock-controller-lvds-ipg {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000000>;
> +		clock-output-names = "lvds0_ipg_clk";
> +	};
> +
>  	/* sorted in register address */
>  	#include "imx8-ss-cm41.dtsi"
>  	#include "imx8-ss-audio.dtsi"
>  	#include "imx8-ss-vpu.dtsi"
>  	#include "imx8-ss-gpu0.dtsi"
> +	#include "imx8-ss-lvds0.dtsi"
> +	#include "imx8-ss-lvds1.dtsi"
>  	#include "imx8-ss-img.dtsi"
>  	#include "imx8-ss-dma.dtsi"
>  	#include "imx8-ss-conn.dtsi"
> @@ -576,3 +585,4 @@ clk_spdif1_rx: clock-spdif1-rx {
>  #include "imx8qm-ss-conn.dtsi"
>  #include "imx8qm-ss-lsio.dtsi"
>  #include "imx8qm-ss-audio.dtsi"
> +#include "imx8qm-ss-lvds.dtsi"
> 
> -- 
> 2.34.1
> 

Re: [PATCH v4 2/8] arm64: dts: imx8qm: add lvds subsystem

[Frank Li]

On Tue, Jul 02, 2024 at 12:10:58PM +0800, Shawn Guo wrote:
> On Mon, Jul 01, 2024 at 11:03:28AM -0400, Frank Li wrote:
> > Add irqsteer, pwm and i2c in lvds subsystem.
> > 
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi | 77 +++++++++++++++++++++++
> >  arch/arm64/boot/dts/freescale/imx8qm.dtsi         | 10 +++
> >  2 files changed, 87 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
> > new file mode 100644
> > index 0000000000000..1da3934847057
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
> > @@ -0,0 +1,77 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +
> > +/*
> > + * Copyright 2024 NXP
> > + */
> > +
> > +&qm_lvds0_lis_lpcg {
> > +	clocks = <&lvds_ipg_clk>;
> > +	clock-indices = <IMX_LPCG_CLK_4>;
> > +};
> > +
> > +&qm_lvds0_pwm_lpcg {
> > +	clocks = <&clk IMX_SC_R_LVDS_0_PWM_0 IMX_SC_PM_CLK_PER>,
> > +		 <&lvds_ipg_clk>;
> > +	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > +};
> > +
> > +&qm_lvds0_i2c0_lpcg {
> > +	clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
> > +		 <&lvds_ipg_clk>;
> > +	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > +};
> > +
> > +&qm_pwm_lvds0 {
> > +	clocks = <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_4>,
> > +		 <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_0>;
> > +};
> > +
> > +&qm_i2c0_lvds0 {
> > +	clocks = <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_0>,
> > +		 <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_4>;
> > +};
> > +
> > +&lvds0_subsys {
> > +	interrupt-parent = <&irqsteer_lvds0>;
> > +
> > +	irqsteer_lvds0: interrupt-controller@56240000 {
> > +		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
> 
> Is compatible "fsl,imx8qm-irqsteer" documented in bindings?

In rob' tree

https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/commit/?h=dt/next&id=285c645d842c5a15d3be2d653faaa5f68d81be1f

Frank
> 
> Shawn
> 
> > +		reg = <0x56240000 0x1000>;
> > +		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> > +		interrupt-controller;
> > +		interrupt-parent = <&gic>;
> > +		#interrupt-cells = <1>;
> > +		clocks = <&qm_lvds0_lis_lpcg IMX_LPCG_CLK_4>;
> > +		clock-names = "ipg";
> > +		power-domains = <&pd IMX_SC_R_LVDS_0>;
> > +
> > +		fsl,channel = <0>;
> > +		fsl,num-irqs = <32>;
> > +	};
> > +
> > +	lvds0_i2c1_lpcg: clock-controller@56243014 {
> > +		compatible = "fsl,imx8qxp-lpcg";
> > +		reg = <0x56243014 0x4>;
> > +		#clock-cells = <1>;
> > +		clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
> > +			 <&lvds_ipg_clk>;
> > +		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > +		clock-output-names = "lvds0_i2c1_lpcg_clk",
> > +				     "lvds0_i2c1_lpcg_ipg_clk";
> > +		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
> > +	};
> > +
> > +	i2c1_lvds0: i2c@56247000 {
> > +		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
> > +		reg = <0x56247000 0x1000>;
> > +		interrupts = <9>;
> > +		clocks = <&lvds0_i2c1_lpcg IMX_LPCG_CLK_0>,
> > +			 <&lvds0_i2c1_lpcg IMX_LPCG_CLK_4>;
> > +		clock-names = "per", "ipg";
> > +		assigned-clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>;
> > +		assigned-clock-rates = <24000000>;
> > +		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
> > +		status = "disabled";
> > +	};
> > +};
> > +
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > index 61986e0639e53..1e8511e8d8577 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > @@ -560,11 +560,20 @@ clk_spdif1_rx: clock-spdif1-rx {
> >  		clock-output-names = "spdif1_rx";
> >  	};
> >  
> > +	lvds_ipg_clk: clock-controller-lvds-ipg {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <24000000>;
> > +		clock-output-names = "lvds0_ipg_clk";
> > +	};
> > +
> >  	/* sorted in register address */
> >  	#include "imx8-ss-cm41.dtsi"
> >  	#include "imx8-ss-audio.dtsi"
> >  	#include "imx8-ss-vpu.dtsi"
> >  	#include "imx8-ss-gpu0.dtsi"
> > +	#include "imx8-ss-lvds0.dtsi"
> > +	#include "imx8-ss-lvds1.dtsi"
> >  	#include "imx8-ss-img.dtsi"
> >  	#include "imx8-ss-dma.dtsi"
> >  	#include "imx8-ss-conn.dtsi"
> > @@ -576,3 +585,4 @@ clk_spdif1_rx: clock-spdif1-rx {
> >  #include "imx8qm-ss-conn.dtsi"
> >  #include "imx8qm-ss-lsio.dtsi"
> >  #include "imx8qm-ss-audio.dtsi"
> > +#include "imx8qm-ss-lvds.dtsi"
> > 
> > -- 
> > 2.34.1
> > 
> 

Re: [PATCH v4 2/8] arm64: dts: imx8qm: add lvds subsystem

[Shawn Guo]

On Tue, Jul 02, 2024 at 12:22:37AM -0400, Frank Li wrote:
> On Tue, Jul 02, 2024 at 12:10:58PM +0800, Shawn Guo wrote:
> > On Mon, Jul 01, 2024 at 11:03:28AM -0400, Frank Li wrote:
> > > Add irqsteer, pwm and i2c in lvds subsystem.
> > > 
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > ---
> > >  arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi | 77 +++++++++++++++++++++++
> > >  arch/arm64/boot/dts/freescale/imx8qm.dtsi         | 10 +++
> > >  2 files changed, 87 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
> > > new file mode 100644
> > > index 0000000000000..1da3934847057
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
> > > @@ -0,0 +1,77 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +
> > > +/*
> > > + * Copyright 2024 NXP
> > > + */
> > > +
> > > +&qm_lvds0_lis_lpcg {
> > > +	clocks = <&lvds_ipg_clk>;
> > > +	clock-indices = <IMX_LPCG_CLK_4>;
> > > +};
> > > +
> > > +&qm_lvds0_pwm_lpcg {
> > > +	clocks = <&clk IMX_SC_R_LVDS_0_PWM_0 IMX_SC_PM_CLK_PER>,
> > > +		 <&lvds_ipg_clk>;
> > > +	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > > +};
> > > +
> > > +&qm_lvds0_i2c0_lpcg {
> > > +	clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
> > > +		 <&lvds_ipg_clk>;
> > > +	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> > > +};
> > > +
> > > +&qm_pwm_lvds0 {
> > > +	clocks = <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_4>,
> > > +		 <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_0>;
> > > +};
> > > +
> > > +&qm_i2c0_lvds0 {
> > > +	clocks = <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_0>,
> > > +		 <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_4>;
> > > +};
> > > +
> > > +&lvds0_subsys {
> > > +	interrupt-parent = <&irqsteer_lvds0>;
> > > +
> > > +	irqsteer_lvds0: interrupt-controller@56240000 {
> > > +		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
> > 
> > Is compatible "fsl,imx8qm-irqsteer" documented in bindings?
> 
> In rob' tree
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/commit/?h=dt/next&id=285c645d842c5a15d3be2d653faaa5f68d81be1f

I do not see "fsl,imx8qm-irqsteer" in the patch.

Shawn

Re: [PATCH v4 2/8] arm64: dts: imx8qm: add lvds subsystem

[Fabio Estevam]

Hi Shawn,

On Tue, Jul 2, 2024 at 3:18 AM Shawn Guo <shawnguo2@yeah.net> wrote:

> I do not see "fsl,imx8qm-irqsteer" in the patch.

I sent a patch for it yesterday:

https://lore.kernel.org/linux-devicetree/1c1e3224-1b3d-438c-bce4-56143292462c@kernel.org/

Re: [PATCH v4 2/8] arm64: dts: imx8qm: add lvds subsystem

[Shawn Guo]

On Tue, Jul 02, 2024 at 07:56:03AM -0300, Fabio Estevam wrote:
> Hi Shawn,
> 
> On Tue, Jul 2, 2024 at 3:18 AM Shawn Guo <shawnguo2@yeah.net> wrote:
> 
> > I do not see "fsl,imx8qm-irqsteer" in the patch.
> 
> I sent a patch for it yesterday:
> 
> https://lore.kernel.org/linux-devicetree/1c1e3224-1b3d-438c-bce4-56143292462c@kernel.org/

I applied the series.  Please help push the bindings update to get
landed.

Shawn

[PATCH v4 3/8] arm64: dts: imx8: add basic mipi subsystem

[Frank Li]

Add basic mipi subsystem for imx8qm and imx8qxp.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi | 130 +++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi | 138 +++++++++++++++++++++++
 2 files changed, 268 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi
new file mode 100644
index 0000000000000..834c0472a8901
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+mipi0_subsys: bus@56220000 {
+	compatible = "simple-bus";
+	interrupt-parent = <&irqsteer_mipi0>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x56220000 0x0 0x56220000 0x10000>;
+
+	irqsteer_mipi0: interrupt-controller@56220000 {
+		compatible = "fsl,imx8qxp-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x56220000 0x1000>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&mipi0_lis_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_MIPI_0>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	mipi0_lis_lpcg: clock-controller@56223000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223000 0x4>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_MIPI_0>;
+	};
+
+	mipi0_pwm_lpcg: clock-controller@5622300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5622300c 0x4>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>;
+	};
+
+	mipi0_i2c0_lpcg_ipg_clk: clock-controller@56223014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi0_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+	};
+
+	mipi0_i2c0_lpcg_ipg_s_clk: clock-controller@56223018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223018 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c0_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+	};
+
+	mipi0_i2c0_lpcg_clk: clock-controller@5622301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5622301c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_0_I2C_0 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+	};
+
+	mipi0_i2c1_lpcg_ipg_clk: clock-controller@56223024 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223024 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi0_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+	};
+
+	mipi0_i2c1_lpcg_ipg_s_clk: clock-controller@56223028 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223028 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c1_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+	};
+
+	mipi0_i2c1_lpcg_clk: clock-controller@5622302c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5622302c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_0_I2C_1 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+	};
+
+	pwm_mipi0: pwm@56224000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x56224000 0x1000>;
+		clocks = <&mipi0_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&mipi0_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>;
+		status = "disabled";
+	};
+
+	i2c0_mipi0: i2c@56226000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x56226000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>,
+			 <&mipi0_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+		status = "disabled";
+	};
+};
+
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi
new file mode 100644
index 0000000000000..5b1f08e412b24
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+mipi1_subsys: bus@57220000 {
+	compatible = "simple-bus";
+	interrupt-parent = <&irqsteer_mipi1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x57220000 0x0 0x57220000 0x10000>;
+
+	irqsteer_mipi1: interrupt-controller@57220000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x57220000 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&mipi1_lis_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_MIPI_1>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	mipi1_lis_lpcg: clock-controller@57223000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_lis_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1>;
+	};
+
+	mipi1_pwm_lpcg: clock-controller@5722300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5722300c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "mipi1_pwm_lpcg_clk",
+				     "mipi1_pwm_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+	};
+
+	mipi1_i2c0_lpcg_clk: clock-controller@5722301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5722301c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	mipi1_i2c0_lpcg_ipg_clk: clock-controller@57223014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi1_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	mipi1_i2c0_lpcg_ipg_s_clk: clock-controller@57223018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223018 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c0_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	mipi1_i2c1_lpcg_ipg_clk: clock-controller@57223024 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223024 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi1_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+	};
+
+	mipi1_i2c1_lpcg_ipg_s_clk: clock-controller@57223028 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223028 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c1_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+	};
+
+	mipi1_i2c1_lpcg_clk: clock-controller@5722302c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5722302c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_1_I2C_1 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+	};
+
+	pwm_mipi1: pwm@57224000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x57224000 0x1000>;
+		clocks = <&mipi1_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&mipi1_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+		status = "disabled";
+	};
+
+	i2c0_mipi1: i2c@57226000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x57226000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		interrupt-parent = <&irqsteer_mipi1>;
+		clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>,
+			 <&mipi1_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+		status = "disabled";
+	};
+};

-- 
2.34.1

[PATCH v4 4/8] arm64: dts: imx8qm: add mipi subsystem

[Frank Li]

Include common imx8-ss-mipi0.dtsi and imx8-ss-mipi1.dtsi.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi | 19 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi         | 17 +++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi
new file mode 100644
index 0000000000000..f4c393fe72044
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2024 NXP
+ */
+
+&mipi0_lis_lpcg {
+	clocks = <&dsi_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>;
+	clock-output-names = "mipi0_lis_lpcg_ipg_clk";
+};
+
+&mipi0_pwm_lpcg {
+	clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>,
+		 <&dsi_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+	clock-output-names = "mipi0_pwm_lpcg_clk",
+			     "mipi0_pwm_lpcg_ipg_clk";
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 1e8511e8d8577..3ee6e2869e3cf 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -567,12 +567,28 @@ lvds_ipg_clk: clock-controller-lvds-ipg {
 		clock-output-names = "lvds0_ipg_clk";
 	};
 
+	dsi_ipg_clk: clock-controller-dsi-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "dsi_ipg_clk";
+	};
+
+	mipi_pll_div2_clk: clock-controller-mipi-div2-pll {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <432000000>;
+		clock-output-names = "mipi_pll_div2_clk";
+	};
+
 	/* sorted in register address */
 	#include "imx8-ss-cm41.dtsi"
 	#include "imx8-ss-audio.dtsi"
 	#include "imx8-ss-vpu.dtsi"
 	#include "imx8-ss-gpu0.dtsi"
+	#include "imx8-ss-mipi0.dtsi"
 	#include "imx8-ss-lvds0.dtsi"
+	#include "imx8-ss-mipi1.dtsi"
 	#include "imx8-ss-lvds1.dtsi"
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-dma.dtsi"
@@ -586,3 +602,4 @@ lvds_ipg_clk: clock-controller-lvds-ipg {
 #include "imx8qm-ss-lsio.dtsi"
 #include "imx8qm-ss-audio.dtsi"
 #include "imx8qm-ss-lvds.dtsi"
+#include "imx8qm-ss-mipi.dtsi"

-- 
2.34.1

[PATCH v4 5/8] arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region

[Frank Li]

Add two cm4 remote-proc and related memory regions.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 93 ++++++++++++++++++++++++++++
 1 file changed, 93 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 778741dbbb338..fcd904383daff 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -31,6 +31,68 @@ memory@80000000 {
 		reg = <0x00000000 0x80000000 0 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		vdev0vring0: memory@90000000 {
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@90008000 {
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@90010000 {
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@90018000 {
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table0: memory@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdev2vring0: memory@90100000 {
+			reg = <0 0x90100000 0 0x8000>;
+			no-map;
+		};
+
+		vdev2vring1: memory@90108000 {
+			reg = <0 0x90108000 0 0x8000>;
+			no-map;
+		};
+
+		vdev3vring0: memory@90110000 {
+			reg = <0 0x90110000 0 0x8000>;
+			no-map;
+		};
+
+		vdev3vring1: memory@90118000 {
+			reg = <0 0x90118000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table1: memory@901ff000 {
+			reg = <0 0x901ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: memory@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+	};
+
 	reg_usdhc2_vmmc: usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -133,6 +195,37 @@ sound-wm8960 {
 				"LINPUT1", "Mic Jack",
 				"Mic Jack", "MICB";
 	};
+
+	imx8qm-cm4-0 {
+		compatible = "fsl,imx8qm-cm4";
+		clocks = <&clk_dummy>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu5 0 1
+			  &lsio_mu5 1 1
+			  &lsio_mu5 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table0>;
+		power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>;
+
+		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+		fsl,entry-address = <0x34fe0000>;
+	};
+
+	imx8qm-cm4-1 {
+		compatible = "fsl,imx8qm-cm4";
+		clocks = <&clk_dummy>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu6 0 1
+			  &lsio_mu6 1 1
+			  &lsio_mu6 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev2vring0>, <&vdev2vring1>,
+				<&vdev3vring0>, <&vdev3vring1>, <&rsc_table1>;
+		power-domains = <&pd IMX_SC_R_M4_1_PID0>, <&pd IMX_SC_R_M4_1_MU_1A>;
+
+		fsl,resource-id = <IMX_SC_R_M4_1_PID0>;
+		fsl,entry-address = <0x38fe0000>;
+	};
+
 };
 
 &adc0 {

-- 
2.34.1

[PATCH v4 6/8] arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem

[Frank Li]

Add pwm[0,1] and i2c[0,1] in lvds subsystem.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 68 ++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index fcd904383daff..fc79ac0d57a1f 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -93,6 +93,22 @@ vdevbuffer: memory@90400000 {
 		};
 	};
 
+	lvds_backlight0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&qm_pwm_lvds0 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <80>;
+	};
+
+	lvds_backlight1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_lvds1 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <80>;
+	};
+
 	reg_usdhc2_vmmc: usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -334,6 +350,20 @@ wm8960: audio-codec@1a {
 	};
 };
 
+&i2c1_lvds0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0_lpi2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c1_lvds1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds1_lpi2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
 &flexcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
@@ -449,6 +479,18 @@ &fec2 {
 	status = "okay";
 };
 
+&qm_pwm_lvds0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_lvds0>;
+	status = "okay";
+};
+
+&pwm_lvds1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_lvds1>;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -675,6 +717,32 @@ IMX8QM_M41_GPIO0_01_DMA_UART3_TX			0x06000020
 		>;
 	};
 
+	pinctrl_lvds0_lpi2c1: lvds0lpi2c1grp {
+		fsl,pins = <
+			IMX8QM_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL	0xc600004c
+			IMX8QM_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA	0xc600004c
+		>;
+	};
+
+	pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp {
+		fsl,pins = <
+			IMX8QM_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL	0xc600004c
+			IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA	0xc600004c
+		>;
+	};
+
+	pinctrl_pwm_lvds0: pwmlvds0grp {
+		fsl,pins = <
+			IMX8QM_LVDS0_GPIO00_LVDS0_PWM0_OUT		0x00000020
+		>;
+	};
+
+	pinctrl_pwm_lvds1: pwmlvds1grp {
+		fsl,pins = <
+			IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT		0x00000020
+		>;
+	};
+
 	pinctrl_sai0: sai0grp {
 		fsl,pins = <
 			IMX8QM_SPI0_CS1_AUD_SAI0_TXC				0x0600004c

-- 
2.34.1

[PATCH v4 7/8] arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem

[Frank Li]

Add i2c node in mipi[0,1] subystem for imx8qm-mek.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 30 ++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index fc79ac0d57a1f..7ceea79f658db 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -364,6 +364,20 @@ &i2c1_lvds1 {
 	status = "okay";
 };
 
+&i2c0_mipi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi0_lpi2c0>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c0_mipi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi1_lpi2c0>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
 &flexcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
@@ -636,6 +650,22 @@ IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10		0x21
 		>;
 	};
 
+	pinctrl_mipi0_lpi2c0: mipi0_lpi2c0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL      0xc6000020
+			IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA      0xc6000020
+			IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19         0x00000020
+		>;
+	};
+
+	pinctrl_mipi1_lpi2c0: mipi1_lpi2c0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL      0xc6000020
+			IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA      0xc6000020
+			IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23         0x00000020
+		>;
+	};
+
 	pinctrl_flexspi0: flexspi0grp {
 		fsl,pins = <
 			IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021

-- 
2.34.1

[PATCH v4 8/8] arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes

[Frank Li]

Enable usb3.0 and related usb type C nodes.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 87 ++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 7ceea79f658db..aa874576e974b 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx8qm.dtsi"
 
 / {
@@ -109,6 +110,21 @@ lvds_backlight1: backlight-lvds1 {
 		default-brightness-level = <80>;
 	};
 
+	mux-controller {
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec_mux>;
+		select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+
 	reg_usdhc2_vmmc: usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -321,6 +337,44 @@ gyrometer@69 {
 		compatible = "st,l3g4200d-gyro";
 		reg = <0x69>;
 	};
+
+	ptn5110: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		reg = <0x51>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		usb_con1: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -525,6 +579,26 @@ &usdhc2 {
 	status = "okay";
 };
 
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
 &sai0 {
 	#sound-dai-cells = <0>;
 	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
@@ -791,6 +865,19 @@ IMX8QM_SAI1_TXC_AUD_SAI1_TXC				0x06000040
 		>;
 	};
 
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26		0x00000021
+		>;
+	};
+
+	pinctrl_typec_mux: typecmuxgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19		0x60
+			IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06		0x60
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041

-- 
2.34.1

Re: [PATCH v4 8/8] arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes

[Frank Li]

On Mon, Jul 01, 2024 at 11:03:34AM -0400, Frank Li wrote:
> Enable usb3.0 and related usb type C nodes.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 87 ++++++++++++++++++++++++++++
>  1 file changed, 87 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> index 7ceea79f658db..aa874576e974b 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts

Shawn:
	Can you take care this?

Frank

> @@ -6,6 +6,7 @@
>
>  /dts-v1/;
>
> +#include <dt-bindings/usb/pd.h>
>  #include "imx8qm.dtsi"
>
>  / {
> @@ -109,6 +110,21 @@ lvds_backlight1: backlight-lvds1 {
>  		default-brightness-level = <80>;
>  	};
>
> +	mux-controller {
> +		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_typec_mux>;
> +		select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>;
> +		enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
> +		orientation-switch;
> +
> +		port {
> +			usb3_data_ss: endpoint {
> +				remote-endpoint = <&typec_con_ss>;
> +			};
> +		};
> +	};
> +
>  	reg_usdhc2_vmmc: usdhc2-vmmc {
>  		compatible = "regulator-fixed";
>  		regulator-name = "SD1_SPWR";
> @@ -321,6 +337,44 @@ gyrometer@69 {
>  		compatible = "st,l3g4200d-gyro";
>  		reg = <0x69>;
>  	};
> +
> +	ptn5110: tcpc@51 {
> +		compatible = "nxp,ptn5110", "tcpci";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_typec>;
> +		reg = <0x51>;
> +		interrupt-parent = <&lsio_gpio4>;
> +		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> +		status = "okay";
> +
> +		usb_con1: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			power-role = "source";
> +			data-role = "dual";
> +			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +
> +					typec_dr_sw: endpoint {
> +						remote-endpoint = <&usb3_drd_sw>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +					typec_con_ss: endpoint {
> +						remote-endpoint = <&usb3_data_ss>;
> +					};
> +				};
> +			};
> +		};
> +	};
>  };
>
>  &i2c1 {
> @@ -525,6 +579,26 @@ &usdhc2 {
>  	status = "okay";
>  };
>
> +&usb3_phy {
> +	status = "okay";
> +};
> +
> +&usbotg3 {
> +	status = "okay";
> +};
> +
> +&usbotg3_cdns3 {
> +	dr_mode = "otg";
> +	usb-role-switch;
> +	status = "okay";
> +
> +	port {
> +		usb3_drd_sw: endpoint {
> +			remote-endpoint = <&typec_dr_sw>;
> +		};
> +	};
> +};
> +
>  &sai0 {
>  	#sound-dai-cells = <0>;
>  	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> @@ -791,6 +865,19 @@ IMX8QM_SAI1_TXC_AUD_SAI1_TXC				0x06000040
>  		>;
>  	};
>
> +	pinctrl_typec: typecgrp {
> +		fsl,pins = <
> +			IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26		0x00000021
> +		>;
> +	};
> +
> +	pinctrl_typec_mux: typecmuxgrp {
> +		fsl,pins = <
> +			IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19		0x60
> +			IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06		0x60
> +		>;
> +	};
> +
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
>  			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041
>
> --
> 2.34.1
>

Re: [PATCH v4 0/8] arm64: dts: imx8qm: add subsystem lvds and mipi

[Shawn Guo]

On Mon, Jul 01, 2024 at 11:03:26AM -0400, Frank Li wrote:
> Frank Li (8):
>       arm64: dts: imx8: add basic lvds0 and lvds1 subsystem
>       arm64: dts: imx8qm: add lvds subsystem
>       arm64: dts: imx8: add basic mipi subsystem
>       arm64: dts: imx8qm: add mipi subsystem
>       arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region
>       arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem
>       arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem
>       arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes

Applied all, thanks!

Re: [PATCH v4 2/8] arm64: dts: imx8qm: add lvds subsystem

[kernel test robot]

:::::: 
:::::: Manual check reason: "dtcheck: binding changes may go via different trees"
:::::: 

BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
In-Reply-To: <20240701-imx8qm-dts-usb-v4-2-03cdbc8c44b6@nxp.com>
References: <20240701-imx8qm-dts-usb-v4-2-03cdbc8c44b6@nxp.com>
TO: Frank Li <Frank.Li@nxp.com>

Hi Frank,

kernel test robot noticed the following build warnings:

[auto build test WARNING on 9db27bc55bd8363570c5a259ff4dc77bd6a0b2cd]

url:    https://github.com/intel-lab-lkp/linux/commits/Frank-Li/arm64-dts-imx8-add-basic-lvds0-and-lvds1-subsystem/20240702-000741
base:   9db27bc55bd8363570c5a259ff4dc77bd6a0b2cd
patch link:    https://lore.kernel.org/r/20240701-imx8qm-dts-usb-v4-2-03cdbc8c44b6%40nxp.com
patch subject: [PATCH v4 2/8] arm64: dts: imx8qm: add lvds subsystem
:::::: branch date: 3 days ago
:::::: commit date: 3 days ago
config: arm64-randconfig-051-20240702 (https://download.01.org/0day-ci/archive/20240704/202407042157.njTc6T21-lkp@intel.com/config)
compiler: clang version 19.0.0git (https://github.com/llvm/llvm-project 326ba38a991250a8587a399a260b0f7af2c9166a)
dtschema version: 2024.6.dev3+g650bf2d
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240704/202407042157.njTc6T21-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/r/202407042157.njTc6T21-lkp@intel.com/

dtcheck warnings: (new ones prefixed by >>)
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: interrupt-controller@56240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
>> arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: interrupt-controller@56240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: /bus@56240000/interrupt-controller@56240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: interrupt-controller@57240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: interrupt-controller@57240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: /bus@57240000/interrupt-controller@57240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
--
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dtb: interrupt-controller@56240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
>> arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dtb: interrupt-controller@56240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dtb: /bus@56240000/interrupt-controller@56240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dtb: interrupt-controller@57240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dtb: interrupt-controller@57240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dtb: /bus@57240000/interrupt-controller@57240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
--
   arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dtb: interrupt-controller@56240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
>> arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dtb: interrupt-controller@56240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dtb: /bus@56240000/interrupt-controller@56240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
   arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dtb: interrupt-controller@57240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dtb: interrupt-controller@57240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dtb: /bus@57240000/interrupt-controller@57240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
--
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dtb: interrupt-controller@56240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
>> arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dtb: interrupt-controller@56240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dtb: /bus@56240000/interrupt-controller@56240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dtb: interrupt-controller@57240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dtb: interrupt-controller@57240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dtb: /bus@57240000/interrupt-controller@57240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
--
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dtb: interrupt-controller@56240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
>> arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dtb: interrupt-controller@56240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dtb: /bus@56240000/interrupt-controller@56240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dtb: interrupt-controller@57240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dtb: interrupt-controller@57240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dtb: /bus@57240000/interrupt-controller@57240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
--
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dtb: interrupt-controller@56240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
>> arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dtb: interrupt-controller@56240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dtb: /bus@56240000/interrupt-controller@56240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dtb: interrupt-controller@57240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dtb: interrupt-controller@57240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dtb: /bus@57240000/interrupt-controller@57240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
--
   arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: interrupt-controller@56240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
>> arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: interrupt-controller@56240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: /bus@56240000/interrupt-controller@56240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
   arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: interrupt-controller@57240000: compatible: 'oneOf' conditional failed, one must be fixed:
   	['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] is too long
   	'fsl,imx-irqsteer' was expected
   	'fsl,imx8m-irqsteer' was expected
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: interrupt-controller@57240000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
   arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: /bus@57240000/interrupt-controller@57240000: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki