Re: [PATCH 03/11] PCI: of_property: Sanitize 32 bit PCI address parsed from DT

[Andrea della Porta <andrea.porta@suse.com>]

Hi Bjorn,

On 15:17 Sat 28 Sep     , Bjorn Helgaas wrote:
...
> From your earlier email
> (https://lore.kernel.org/r/Zszcps6bnCcdFa54@apocalypse):
> 
> > Without this patch the range translation chain is broken, like this:
> 
> > pcie@120000: <0x2000000 0x00 0x00    0x1f 0x00                0x00 0xfffffffc>;
> > ~~~ chain breaks here ~~~
> > pci@0      : <0x82000000 0x1f 0x00   0x82000000 0x1f 0x00     0x00 0x600000>;
> > dev@0,0    : <0x01 0x00 0x00         0x82010000 0x1f 0x00     0x00 0x400000>;
> > rp1@0      : <0xc0 0x40000000        0x01 0x00 0x00           0x00 0x400000>;
> 
> The cover letter said "RP1 is an MFD chipset that acts as a
> south-bridge PCIe endpoint .. the RP1 as an endpoint itself is
> discoverable via usual PCI enumeration".
> 
> I assume pcie@120000 is the PCI host bridge and is already in the
> original DT describing the platform.  I assume pci@0 is a Root Port
> and dev@0,0 is the RP1 Endpoint, and the existing code already adds
> them as they are enumerated when pci_bus_add_device() calls
> of_pci_make_dev_node(), and I think this series adds the rp1@0
> description.

Correct.

> 
> And the "ranges" properties are built when of_pci_make_dev_node()
> eventually calls of_pci_prop_ranges().  With reference to sec 2.2.1.1
> of https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
> and
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#ranges,
> I *think* your example says:
> 
> pcie@120000 has:
>   child phys.hi	      0x02000000    n=0 p=0 t=0 ss=10b
>   child phys.mid,lo   0x00000000_00000000
>   parent phys.hi,lo   0x0000001f_00000000
>   length hi,lo        0x00000000_fffffffc
> 
> which would make it a bridge where the child (PCI) address space is
> relocatable non-prefetchable 32-bit memory space at
> 0x00000000-0xfffffffc, and the corresponding parent address space is
> 0x1f_00000000-0x1f_fffffffc.  That means the host bridge applies an
> address translation of "child_addr = parent_addr - 0x1f_00000000".
> 
> pci@0 has:
>   child phys.hi	      0x82000000    n=1 p=0 t=0 ss=10b
>   child phys.mid,lo   0x0000001f_00000000
>   parent phys.hi      0x82000000    n=1 p=0 t=0 ss=10b
>   parent phys.mid,lo  0x0000001f_00000000
>   length hi,lo        0x00000000_00600000
> 
> which would make it a PCI-to-PCI bridge (I assume a PCIe Root Port),
> where the child (secondary bus) address space is the non-relocatable
> non-prefetchable 32-bit memory space 0x1f_00000000-0x1f_005fffff and
> the parent (primary bus) address space is also non-relocatable
> non-prefetchable 32-bit memory space at 0x1f_00000000-0x1f_005fffff.
> 
> This looks wrong to me because the pci@0 parent address space
> (0x1f_00000000-0x1f_005fffff) should be inside the pcie@120000 child
> address space (0x00000000-0xfffffffc), but it's not.

Exactly, that example refers to the 'uncorrected' case, i.e. without the
patch applied.

> 
> IIUC, this patch clears the upper 32 bits in the pci@0 parent address
> space.  That would make things work correctly in this case because
> that happens to be the exact translation of pcie@120000, so it results
> in pci@0 parent address space of 0x00000000-0x005fffff.

Right. I think we sould split it into two issues:

[1] RP1 acknowledges a 32 bit BAR address from its config space while the
device must be accessed using a 64 bit address (that is cpu address
0x1f_00000000), which sounds strange to me but I guess that is how
the hw interconnect has been designed, so we need to cope with it.

[2] I still think that the of_pci_set_address() function should be amended
to avoid generating invalid 64 address when 32 bit flag is set.

As you noted, fixing [2] will incidentally also let [1] work: I think
we can try to solve [1] the proper way and maybe defer [2] for a separate
patch.
To solve [1] I've dropped this patch and tried to solve it from devicetree,
modifying the following mapping:

pcie@120000: <0x3000000 0x1f 0x00    0x1f 0x00                0x00 0xfffffffc>;

so we now have a 1:1 64 bit mapping from 0x1f_00000000 to 0x1f_00000000.
I thought it would result in something like this:

pcie@120000: <0x3000000 0x1f 0x00    0x1f 0x00                0x00 0xfffffffc>;
pci@0      : <0x82000000 0x1f 0x00   0x82000000 0x1f 0x00     0x00 0x600000>;
dev@0,0    : <0x01 0x00 0x00         0x82010000 0x1f 0x00     0x00 0x400000>;
rp1@0      : <0xc0 0x40000000        0x01 0x00 0x00           0x00 0x400000>;

but it fails instead (err: "can't assign; no space") in pci_assign_resource()
function trying to match the size using pci_clip_resource_to_region(). It turned
out that the clipping is done against 32 bit memory region 'pci_32_bit',and
this is failing because the original region addresses to be clipped wxxiereas 64
bit wide. The 'culprit' seems to be the function devm_of_pci_get_host_bridge_resources()
dropping IORESOURCE_MEM_64 on any memory resource, which seems to be a change
somewhat specific to a RK3399 case (see commit 3bd6b8271ee66), but I'm not sure
whether it can be considered generic.

So, I'm actually at an empasse here.

Also, while taking a look at the resulting devicetree, I'm a bit confused by the
fact that the parent address generated by of_pci_prop_ranges() for the pci@0,0
bridge seems to be taken from the parent address of the pcie@120000 node. Shouldn't
it be taken from the child address of pcie@120000, instead?

> 
> But I don't think it works in general because there's no requirement
> that the host bridge address translation be that simple.  For example,
> if we have two host bridges, and we want each to have 2GB of 32-bit
> PCI address space starting at 0x0, it might look like this:
> 
>   0x00000002_00000000 -> PCI 0x00000000 (subtract 0x00000002_00000000)
>   0x00000002_80000000 -> PCI 0x00000000 (subtract 0x00000002_80000000)
> 
> In this case simply ignoring the high 32 bits of the CPU address isn't
> the correct translation for the second host bridge.  I think we should
> look at each host bridge's "ranges", find the difference between its
> parent and child addresses, and apply the same difference to
> everything below that bridge.

Not sure I've got this scenario straight: can you please provide the topology
and the bit setting (32/64 bit) for those ranges? Also, is this scenario coming
from a real use case or is it hypothetical?

Many thanks,
Andrea

...