Re: [PATCH v2] arm64: dts: rockchip: Add RK3566 LubanCat 1

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 20/12/2022 11:21, Yuteng Zhong wrote:
> LubanCat 1 is a Rockchip RK3566 SBC based
> is developed by EmbedFire Electronics Co., Ltd.
> Mini Linux Card Type Cheap Computer Development Board

Please wrap commit message according to Linux coding style / submission
process:
https://elixir.bootlin.com/linux/v5.18-rc4/source/Documentation/process/submitting-patches.rst#L586

> It has the following characteristics:
> - MicroSD card slot, onboard eMMC flash memory
> - 1GbE Realtek RTL8211F Ethernet Transceiver
> - 1 USB Type-C port (power and USB2.0 OTG)
> - 1 USB 3.0 Host port
> - 3 USB 2.0 Host ports
> - 1 HDMI
> - 1 infrared receiver
> - 1 MIPI DSI
> - 1 MIPI CSI
> - 1 x 4-section headphone jack
> - Mini PCIe socket (USB or PCIe)
> - 1 SIM Card slot
> - 1 SYS LED and 1 PWR LED
> - 40-pin GPIO expansion header
> 
> Signed-off-by: Yuteng Zhong <zonyitoo@gmail.com>
> Signed-off-by: DHDAXCW <lasstp5011@gmail.com>
> ---
>  .../devicetree/bindings/arm/rockchip.yaml     |   5 +
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../boot/dts/rockchip/rk3566-lubancat-1.dts   | 600 ++++++++++++++++++
>  3 files changed, 606 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index 88ff4422a8c1..84d39a3a8843 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -781,6 +781,11 @@ properties:
>            - const: rockchip,rk3568-bpi-r2pro
>            - const: rockchip,rk3568
>  
> +      - description: EmbedFire LubanCat 1
> +        items:
> +          - const: embedfire,lubancat-1
> +          - const: rockchip,rk3566
> +

This is separate patch. Does not look like properly ordered. Don't add
stuff at the end of files/lists.

>  additionalProperties: true
>  
>  ...
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 0a76a2ebb5f6..e52bda04d45a 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
> new file mode 100644
> index 000000000000..af1abb38d45c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
> @@ -0,0 +1,600 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> +* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> +*/
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> +#include "rk3566.dtsi"
> +
> +/ {
> +	model = "EmbedFire LubanCat 1";
> +	compatible = "embedfire,lubancat-1", "rockchip,rk3566";
> +
> +	aliases {
> +		ethernet0 = &gmac1;
> +		mmc0 = &sdmmc0;
> +		mmc1 = &sdhci;
> +	};
> +
> +	chosen: chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	gmac1_clkin: external-gmac1-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <125000000>;
> +		clock-output-names = "gmac1_clkin";
> +		#clock-cells = <0>;
> +	};
> +	
> +	hdmi-con {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_con_in: endpoint {
> +				remote-endpoint = <&hdmi_out_con>;
> +			};
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		sys_led: sys-led {
> +			label = "sys_led";
> +			linux,default-trigger = "heartbeat";
> +			default-state = "on";
> +			gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&sys_led_pin>;
> +		};
> +	};
> +
> +	dc_5v: dc-5v {

Node names should be generic, so at least with regulator prefix or suffix.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "regulator-fixed";
> +		regulator-name = "dc_5v";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	vcc3v3_sys: vcc3v3-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc5v0_sys: vcc5v0-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&dc_5v>;
> +	};
> +
> +	pcie_3v3: pcie2-3v3-regulator {

And here you have it? Keep your code consistent.

> +		compatible = "regulator-fixed";
> +		regulator-name = "pcie_3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		enable-active-high;
> +		gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
> +		startup-delay-us = <5000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vcc5v0_usb20_host_en>;
> +		regulator-name = "vcc5v0_usb20_host";
> +		regulator-always-on;
> +	};
> +
> +	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vcc5v0_usb30_host_en>;
> +		regulator-name = "vcc5v0_usb30_host";
> +		regulator-always-on;
> +	};
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&combphy1 {
> +	status = "okay";
> +};
> +
> +&combphy2 {
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu2 {
> +	cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu3 {
> +	cpu-supply = <&vdd_cpu>;
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_gpu>;
> +	status = "okay";
> +};
> +
> +&hdmi {
> +	avdd-0v9-supply = <&vdda0v9_image>;
> +	avdd-1v8-supply = <&vcca1v8_image>;
> +	status = "okay";
> +};
> +
> +&hdmi_in {
> +	hdmi_in_vp0: endpoint {
> +		remote-endpoint = <&vp0_out_hdmi>;
> +	};
> +};
> +
> +&hdmi_out {
> +	hdmi_out_con: endpoint {
> +		remote-endpoint = <&hdmi_con_in>;
> +	};
> +};
> +
> +&hdmi_sound {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	vdd_cpu: regulator@1c {
> +		compatible = "tcs,tcs4525";
> +		reg = <0x1c>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <800000>;
> +		regulator-max-microvolt = <1150000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	rk809: pmic@20 {
> +		compatible = "rockchip,rk809";
> +		reg = <0x20>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> +		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> +		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> +		#clock-cells = <1>;
> +		clock-names = "mclk";
> +		clocks = <&cru I2S1_MCLKOUT_TX>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_int>;
> +		rockchip,system-power-controller;
> +		#sound-dai-cells = <0>;
> +		vcc1-supply = <&vcc3v3_sys>;
> +		vcc2-supply = <&vcc3v3_sys>;
> +		vcc3-supply = <&vcc3v3_sys>;
> +		vcc4-supply = <&vcc3v3_sys>;
> +		vcc5-supply = <&vcc3v3_sys>;
> +		vcc6-supply = <&vcc3v3_sys>;
> +		vcc7-supply = <&vcc3v3_sys>;
> +		vcc8-supply = <&vcc3v3_sys>;
> +		vcc9-supply = <&vcc3v3_sys>;
> +		wakeup-source;
> +
> +		regulators {
> +			vdd_logic: DCDC_REG1 {

No underscores in node names. Anything requires it?


Best regards,
Krzysztof


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip