[PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Ajay Kumar]

When PCI function drivers(ex:pci-endpoint-test) are probed for already
initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
then we encounter a situation where the function driver tries to attach
itself to the smmu with the same stream-id as PCIe-RC and re-initialize
an already initialized STE. This causes ste_live BUG_ON() in the driver.

There is an already existing check in the driver to manage duplicated ids
if duplicated ids are added in same master device, but there can be
scenarios like above where we need to extend the check for other masters
using the same stream-id.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index e634bbe60573..a91c3c0e9ee8 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2022,10 +2022,26 @@ static __le64 *arm_smmu_get_step_for_sid(struct arm_smmu_device *smmu, u32 sid)
 	return step;
 }
 
+static bool arm_smmu_check_duplicated_sid(struct arm_smmu_master *master,
+								int sid)
+{
+	int i;
+
+	for (i = 0; i < master->num_sids; ++i)
+		if (master->sids[i] == sid)
+			return true;
+
+	return false;
+}
+
 static void arm_smmu_install_ste_for_dev(struct arm_smmu_master *master)
 {
+	bool sid_in_other_masters;
 	int i, j;
 	struct arm_smmu_device *smmu = master->smmu;
+	unsigned long flags;
+	struct arm_smmu_domain *smmu_domain = master->domain;
+	struct arm_smmu_master *other_masters;
 
 	for (i = 0; i < master->num_sids; ++i) {
 		u32 sid = master->sids[i];
@@ -2038,6 +2054,23 @@ static void arm_smmu_install_ste_for_dev(struct arm_smmu_master *master)
 		if (j < i)
 			continue;
 
+		/* Check for stream-ID duplication in masters in given domain */
+		sid_in_other_masters = false;
+		spin_lock_irqsave(&smmu_domain->devices_lock, flags);
+		list_for_each_entry(other_masters, &smmu_domain->devices,
+								domain_head) {
+			sid_in_other_masters =
+				arm_smmu_check_duplicated_sid(other_masters,
+									sid);
+			if (sid_in_other_masters)
+				break;
+		}
+		spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
+
+		/* Skip STE re-init if stream-id found in other masters */
+		if (sid_in_other_masters)
+			continue;
+
 		arm_smmu_write_strtab_ent(master, sid, step);
 	}
 }
-- 
2.17.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Ajay Kumar]

When PCI function drivers(ex:pci-endpoint-test) are probed for already
initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
then we encounter a situation where the function driver tries to attach
itself to the smmu with the same stream-id as PCIe-RC and re-initialize
an already initialized STE. This causes ste_live BUG_ON() in the driver.

There is an already existing check in the driver to manage duplicated ids
if duplicated ids are added in same master device, but there can be
scenarios like above where we need to extend the check for other masters
using the same stream-id.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index e634bbe60573..a91c3c0e9ee8 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2022,10 +2022,26 @@ static __le64 *arm_smmu_get_step_for_sid(struct arm_smmu_device *smmu, u32 sid)
 	return step;
 }
 
+static bool arm_smmu_check_duplicated_sid(struct arm_smmu_master *master,
+								int sid)
+{
+	int i;
+
+	for (i = 0; i < master->num_sids; ++i)
+		if (master->sids[i] == sid)
+			return true;
+
+	return false;
+}
+
 static void arm_smmu_install_ste_for_dev(struct arm_smmu_master *master)
 {
+	bool sid_in_other_masters;
 	int i, j;
 	struct arm_smmu_device *smmu = master->smmu;
+	unsigned long flags;
+	struct arm_smmu_domain *smmu_domain = master->domain;
+	struct arm_smmu_master *other_masters;
 
 	for (i = 0; i < master->num_sids; ++i) {
 		u32 sid = master->sids[i];
@@ -2038,6 +2054,23 @@ static void arm_smmu_install_ste_for_dev(struct arm_smmu_master *master)
 		if (j < i)
 			continue;
 
+		/* Check for stream-ID duplication in masters in given domain */
+		sid_in_other_masters = false;
+		spin_lock_irqsave(&smmu_domain->devices_lock, flags);
+		list_for_each_entry(other_masters, &smmu_domain->devices,
+								domain_head) {
+			sid_in_other_masters =
+				arm_smmu_check_duplicated_sid(other_masters,
+									sid);
+			if (sid_in_other_masters)
+				break;
+		}
+		spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
+
+		/* Skip STE re-init if stream-id found in other masters */
+		if (sid_in_other_masters)
+			continue;
+
 		arm_smmu_write_strtab_ent(master, sid, step);
 	}
 }
-- 
2.17.1

[PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Ajay Kumar]

When PCI function drivers(ex:pci-endpoint-test) are probed for already
initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
then we encounter a situation where the function driver tries to attach
itself to the smmu with the same stream-id as PCIe-RC and re-initialize
an already initialized STE. This causes ste_live BUG_ON() in the driver.

There is an already existing check in the driver to manage duplicated ids
if duplicated ids are added in same master device, but there can be
scenarios like above where we need to extend the check for other masters
using the same stream-id.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index e634bbe60573..a91c3c0e9ee8 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2022,10 +2022,26 @@ static __le64 *arm_smmu_get_step_for_sid(struct arm_smmu_device *smmu, u32 sid)
 	return step;
 }
 
+static bool arm_smmu_check_duplicated_sid(struct arm_smmu_master *master,
+								int sid)
+{
+	int i;
+
+	for (i = 0; i < master->num_sids; ++i)
+		if (master->sids[i] == sid)
+			return true;
+
+	return false;
+}
+
 static void arm_smmu_install_ste_for_dev(struct arm_smmu_master *master)
 {
+	bool sid_in_other_masters;
 	int i, j;
 	struct arm_smmu_device *smmu = master->smmu;
+	unsigned long flags;
+	struct arm_smmu_domain *smmu_domain = master->domain;
+	struct arm_smmu_master *other_masters;
 
 	for (i = 0; i < master->num_sids; ++i) {
 		u32 sid = master->sids[i];
@@ -2038,6 +2054,23 @@ static void arm_smmu_install_ste_for_dev(struct arm_smmu_master *master)
 		if (j < i)
 			continue;
 
+		/* Check for stream-ID duplication in masters in given domain */
+		sid_in_other_masters = false;
+		spin_lock_irqsave(&smmu_domain->devices_lock, flags);
+		list_for_each_entry(other_masters, &smmu_domain->devices,
+								domain_head) {
+			sid_in_other_masters =
+				arm_smmu_check_duplicated_sid(other_masters,
+									sid);
+			if (sid_in_other_masters)
+				break;
+		}
+		spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
+
+		/* Skip STE re-init if stream-id found in other masters */
+		if (sid_in_other_masters)
+			continue;
+
 		arm_smmu_write_strtab_ent(master, sid, step);
 	}
 }
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Will Deacon]

On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
> When PCI function drivers(ex:pci-endpoint-test) are probed for already
> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
> then we encounter a situation where the function driver tries to attach
> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
> an already initialized STE. This causes ste_live BUG_ON() in the driver.

I don't understand why the endpoint is using the same stream ID as the root
complex in this case. Why is that? Is the grouping logic not working
properly?

> There is an already existing check in the driver to manage duplicated ids
> if duplicated ids are added in same master device, but there can be
> scenarios like above where we need to extend the check for other masters
> using the same stream-id.
> 
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
>  1 file changed, 33 insertions(+)

It doesn't feel like the driver is the right place to fix this, as the same
issue could surely occur for other IOMMUs too, right? In which case, I think
we should avoid getting into the situation where different groups have
overlapping stream IDs.

Will
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Will Deacon]

On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
> When PCI function drivers(ex:pci-endpoint-test) are probed for already
> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
> then we encounter a situation where the function driver tries to attach
> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
> an already initialized STE. This causes ste_live BUG_ON() in the driver.

I don't understand why the endpoint is using the same stream ID as the root
complex in this case. Why is that? Is the grouping logic not working
properly?

> There is an already existing check in the driver to manage duplicated ids
> if duplicated ids are added in same master device, but there can be
> scenarios like above where we need to extend the check for other masters
> using the same stream-id.
> 
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
>  1 file changed, 33 insertions(+)

It doesn't feel like the driver is the right place to fix this, as the same
issue could surely occur for other IOMMUs too, right? In which case, I think
we should avoid getting into the situation where different groups have
overlapping stream IDs.

Will

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Will Deacon]

On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
> When PCI function drivers(ex:pci-endpoint-test) are probed for already
> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
> then we encounter a situation where the function driver tries to attach
> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
> an already initialized STE. This causes ste_live BUG_ON() in the driver.

I don't understand why the endpoint is using the same stream ID as the root
complex in this case. Why is that? Is the grouping logic not working
properly?

> There is an already existing check in the driver to manage duplicated ids
> if duplicated ids are added in same master device, but there can be
> scenarios like above where we need to extend the check for other masters
> using the same stream-id.
> 
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
>  1 file changed, 33 insertions(+)

It doesn't feel like the driver is the right place to fix this, as the same
issue could surely occur for other IOMMUs too, right? In which case, I think
we should avoid getting into the situation where different groups have
overlapping stream IDs.

Will

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Robin Murphy]

On 2021-01-07 13:03, Will Deacon wrote:
> On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
>> When PCI function drivers(ex:pci-endpoint-test) are probed for already
>> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
>> then we encounter a situation where the function driver tries to attach
>> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
>> an already initialized STE. This causes ste_live BUG_ON() in the driver.

Note that this is actually expected behaviour, since Stream ID aliasing 
has remained officially not supported until a sufficiently compelling 
reason to do so appears. I always thought the most likely scenario would 
be a legacy PCI bridge with multiple devices behind it, but even that 
seems increasingly improbable for a modern SMMUv3-based system to ever see.

> I don't understand why the endpoint is using the same stream ID as the root
> complex in this case. Why is that? Is the grouping logic not working
> properly?

It's not so much that it isn't working properly, it's more that it needs 
to be implemented at all ;)

>> There is an already existing check in the driver to manage duplicated ids
>> if duplicated ids are added in same master device, but there can be
>> scenarios like above where we need to extend the check for other masters
>> using the same stream-id.
>>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
>> ---
>>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
>>   1 file changed, 33 insertions(+)
> 
> It doesn't feel like the driver is the right place to fix this, as the same
> issue could surely occur for other IOMMUs too, right? In which case, I think
> we should avoid getting into the situation where different groups have
> overlapping stream IDs.

Yes, this patch does not represent the correct thing to do either way. 
The main reason that Stream ID aliasing hasn't been supported so far is 
that the required Stream ID to group lookup is rather awkward, and 
adding all of that complexity just for the sake of a rather unlikely 
possibility seemed dubious. However, PRI support has always had a more 
pressing need to implement almost the same thing (Stream ID to device), 
so once that lands we can finally get round to adding the rest of proper 
group support relatively easily.

Robin.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Robin Murphy]

On 2021-01-07 13:03, Will Deacon wrote:
> On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
>> When PCI function drivers(ex:pci-endpoint-test) are probed for already
>> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
>> then we encounter a situation where the function driver tries to attach
>> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
>> an already initialized STE. This causes ste_live BUG_ON() in the driver.

Note that this is actually expected behaviour, since Stream ID aliasing 
has remained officially not supported until a sufficiently compelling 
reason to do so appears. I always thought the most likely scenario would 
be a legacy PCI bridge with multiple devices behind it, but even that 
seems increasingly improbable for a modern SMMUv3-based system to ever see.

> I don't understand why the endpoint is using the same stream ID as the root
> complex in this case. Why is that? Is the grouping logic not working
> properly?

It's not so much that it isn't working properly, it's more that it needs 
to be implemented at all ;)

>> There is an already existing check in the driver to manage duplicated ids
>> if duplicated ids are added in same master device, but there can be
>> scenarios like above where we need to extend the check for other masters
>> using the same stream-id.
>>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
>> ---
>>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
>>   1 file changed, 33 insertions(+)
> 
> It doesn't feel like the driver is the right place to fix this, as the same
> issue could surely occur for other IOMMUs too, right? In which case, I think
> we should avoid getting into the situation where different groups have
> overlapping stream IDs.

Yes, this patch does not represent the correct thing to do either way. 
The main reason that Stream ID aliasing hasn't been supported so far is 
that the required Stream ID to group lookup is rather awkward, and 
adding all of that complexity just for the sake of a rather unlikely 
possibility seemed dubious. However, PRI support has always had a more 
pressing need to implement almost the same thing (Stream ID to device), 
so once that lands we can finally get round to adding the rest of proper 
group support relatively easily.

Robin.

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Robin Murphy]

On 2021-01-07 13:03, Will Deacon wrote:
> On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
>> When PCI function drivers(ex:pci-endpoint-test) are probed for already
>> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
>> then we encounter a situation where the function driver tries to attach
>> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
>> an already initialized STE. This causes ste_live BUG_ON() in the driver.

Note that this is actually expected behaviour, since Stream ID aliasing 
has remained officially not supported until a sufficiently compelling 
reason to do so appears. I always thought the most likely scenario would 
be a legacy PCI bridge with multiple devices behind it, but even that 
seems increasingly improbable for a modern SMMUv3-based system to ever see.

> I don't understand why the endpoint is using the same stream ID as the root
> complex in this case. Why is that? Is the grouping logic not working
> properly?

It's not so much that it isn't working properly, it's more that it needs 
to be implemented at all ;)

>> There is an already existing check in the driver to manage duplicated ids
>> if duplicated ids are added in same master device, but there can be
>> scenarios like above where we need to extend the check for other masters
>> using the same stream-id.
>>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
>> ---
>>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
>>   1 file changed, 33 insertions(+)
> 
> It doesn't feel like the driver is the right place to fix this, as the same
> issue could surely occur for other IOMMUs too, right? In which case, I think
> we should avoid getting into the situation where different groups have
> overlapping stream IDs.

Yes, this patch does not represent the correct thing to do either way. 
The main reason that Stream ID aliasing hasn't been supported so far is 
that the required Stream ID to group lookup is rather awkward, and 
adding all of that complexity just for the sake of a rather unlikely 
possibility seemed dubious. However, PRI support has always had a more 
pressing need to implement almost the same thing (Stream ID to device), 
so once that lands we can finally get round to adding the rest of proper 
group support relatively easily.

Robin.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Ajay Kumar]

On Tue, Jan 12, 2021 at 12:57 AM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2021-01-07 13:03, Will Deacon wrote:
> > On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
> >> When PCI function drivers(ex:pci-endpoint-test) are probed for already
> >> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
> >> then we encounter a situation where the function driver tries to attach
> >> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
> >> an already initialized STE. This causes ste_live BUG_ON() in the driver.
>
> Note that this is actually expected behaviour, since Stream ID aliasing
> has remained officially not supported until a sufficiently compelling
> reason to do so appears. I always thought the most likely scenario would
> be a legacy PCI bridge with multiple devices behind it, but even that
> seems increasingly improbable for a modern SMMUv3-based system to ever see.
Thanks to Will and Robin for reviewing this. I am pretty new to PCI,
sorry about that.
I assumed that the support for stream-id alias is already handled as
part of this patch:
https://www.spinics.net/lists/arm-kernel/msg626087.html
which prevents STE re-initialization. But, what I do not understand is
why the path
taken by the arm-smmu-v3 driver misses the aforementioned check for my usecase.

> > I don't understand why the endpoint is using the same stream ID as the root
> > complex in this case. Why is that? Is the grouping logic not working
> > properly?
>
> It's not so much that it isn't working properly, it's more that it needs
> to be implemented at all ;)
The pci_endpoint_test picks up the same of_ DMA config node as the PCI RC
because they sit on the same PCI bus [via pci_dma_configure( )]
While in the arm-smmu-v3 driver, I can see that the pci_device_group( ) hands
over the same iommu group as the Root Complex to the newly added master
device (pci_endpoint_test in our case) because they share the same stream ID.
Shouldn't they?

> >> There is an already existing check in the driver to manage duplicated ids
> >> if duplicated ids are added in same master device, but there can be
> >> scenarios like above where we need to extend the check for other masters
> >> using the same stream-id.
> >>
> >> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> >> ---
> >>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
> >>   1 file changed, 33 insertions(+)
> >
> > It doesn't feel like the driver is the right place to fix this, as the same
> > issue could surely occur for other IOMMUs too, right? In which case, I think
> > we should avoid getting into the situation where different groups have
> > overlapping stream IDs.
>
> Yes, this patch does not represent the correct thing to do either way.
> The main reason that Stream ID aliasing hasn't been supported so far is
> that the required Stream ID to group lookup is rather awkward, and
> adding all of that complexity just for the sake of a rather unlikely
> possibility seemed dubious. However, PRI support has always had a more
> pressing need to implement almost the same thing (Stream ID to device),
> so once that lands we can finally get round to adding the rest of proper
> group support relatively easily.
I hope the support will be added soon. Also, can you point me to few drivers
which already handle this type of stream-ID aliasing?

Thanks,
Ajay Kumar
> ______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Ajay Kumar]

On Tue, Jan 12, 2021 at 12:57 AM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2021-01-07 13:03, Will Deacon wrote:
> > On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
> >> When PCI function drivers(ex:pci-endpoint-test) are probed for already
> >> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
> >> then we encounter a situation where the function driver tries to attach
> >> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
> >> an already initialized STE. This causes ste_live BUG_ON() in the driver.
>
> Note that this is actually expected behaviour, since Stream ID aliasing
> has remained officially not supported until a sufficiently compelling
> reason to do so appears. I always thought the most likely scenario would
> be a legacy PCI bridge with multiple devices behind it, but even that
> seems increasingly improbable for a modern SMMUv3-based system to ever see.
Thanks to Will and Robin for reviewing this. I am pretty new to PCI,
sorry about that.
I assumed that the support for stream-id alias is already handled as
part of this patch:
https://www.spinics.net/lists/arm-kernel/msg626087.html
which prevents STE re-initialization. But, what I do not understand is
why the path
taken by the arm-smmu-v3 driver misses the aforementioned check for my usecase.

> > I don't understand why the endpoint is using the same stream ID as the root
> > complex in this case. Why is that? Is the grouping logic not working
> > properly?
>
> It's not so much that it isn't working properly, it's more that it needs
> to be implemented at all ;)
The pci_endpoint_test picks up the same of_ DMA config node as the PCI RC
because they sit on the same PCI bus [via pci_dma_configure( )]
While in the arm-smmu-v3 driver, I can see that the pci_device_group( ) hands
over the same iommu group as the Root Complex to the newly added master
device (pci_endpoint_test in our case) because they share the same stream ID.
Shouldn't they?

> >> There is an already existing check in the driver to manage duplicated ids
> >> if duplicated ids are added in same master device, but there can be
> >> scenarios like above where we need to extend the check for other masters
> >> using the same stream-id.
> >>
> >> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> >> ---
> >>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
> >>   1 file changed, 33 insertions(+)
> >
> > It doesn't feel like the driver is the right place to fix this, as the same
> > issue could surely occur for other IOMMUs too, right? In which case, I think
> > we should avoid getting into the situation where different groups have
> > overlapping stream IDs.
>
> Yes, this patch does not represent the correct thing to do either way.
> The main reason that Stream ID aliasing hasn't been supported so far is
> that the required Stream ID to group lookup is rather awkward, and
> adding all of that complexity just for the sake of a rather unlikely
> possibility seemed dubious. However, PRI support has always had a more
> pressing need to implement almost the same thing (Stream ID to device),
> so once that lands we can finally get round to adding the rest of proper
> group support relatively easily.
I hope the support will be added soon. Also, can you point me to few drivers
which already handle this type of stream-ID aliasing?

Thanks,
Ajay Kumar
> ______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Ajay Kumar]

On Tue, Jan 12, 2021 at 12:57 AM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2021-01-07 13:03, Will Deacon wrote:
> > On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
> >> When PCI function drivers(ex:pci-endpoint-test) are probed for already
> >> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
> >> then we encounter a situation where the function driver tries to attach
> >> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
> >> an already initialized STE. This causes ste_live BUG_ON() in the driver.
>
> Note that this is actually expected behaviour, since Stream ID aliasing
> has remained officially not supported until a sufficiently compelling
> reason to do so appears. I always thought the most likely scenario would
> be a legacy PCI bridge with multiple devices behind it, but even that
> seems increasingly improbable for a modern SMMUv3-based system to ever see.
Thanks to Will and Robin for reviewing this. I am pretty new to PCI,
sorry about that.
I assumed that the support for stream-id alias is already handled as
part of this patch:
https://www.spinics.net/lists/arm-kernel/msg626087.html
which prevents STE re-initialization. But, what I do not understand is
why the path
taken by the arm-smmu-v3 driver misses the aforementioned check for my usecase.

> > I don't understand why the endpoint is using the same stream ID as the root
> > complex in this case. Why is that? Is the grouping logic not working
> > properly?
>
> It's not so much that it isn't working properly, it's more that it needs
> to be implemented at all ;)
The pci_endpoint_test picks up the same of_ DMA config node as the PCI RC
because they sit on the same PCI bus [via pci_dma_configure( )]
While in the arm-smmu-v3 driver, I can see that the pci_device_group( ) hands
over the same iommu group as the Root Complex to the newly added master
device (pci_endpoint_test in our case) because they share the same stream ID.
Shouldn't they?

> >> There is an already existing check in the driver to manage duplicated ids
> >> if duplicated ids are added in same master device, but there can be
> >> scenarios like above where we need to extend the check for other masters
> >> using the same stream-id.
> >>
> >> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> >> ---
> >>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
> >>   1 file changed, 33 insertions(+)
> >
> > It doesn't feel like the driver is the right place to fix this, as the same
> > issue could surely occur for other IOMMUs too, right? In which case, I think
> > we should avoid getting into the situation where different groups have
> > overlapping stream IDs.
>
> Yes, this patch does not represent the correct thing to do either way.
> The main reason that Stream ID aliasing hasn't been supported so far is
> that the required Stream ID to group lookup is rather awkward, and
> adding all of that complexity just for the sake of a rather unlikely
> possibility seemed dubious. However, PRI support has always had a more
> pressing need to implement almost the same thing (Stream ID to device),
> so once that lands we can finally get round to adding the rest of proper
> group support relatively easily.
I hope the support will be added soon. Also, can you point me to few drivers
which already handle this type of stream-ID aliasing?

Thanks,
Ajay Kumar
> ______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Robin Murphy]

On 2021-01-12 20:29, Ajay Kumar wrote:
> On Tue, Jan 12, 2021 at 12:57 AM Robin Murphy <robin.murphy@arm.com> wrote:
>>
>> On 2021-01-07 13:03, Will Deacon wrote:
>>> On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
>>>> When PCI function drivers(ex:pci-endpoint-test) are probed for already
>>>> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
>>>> then we encounter a situation where the function driver tries to attach
>>>> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
>>>> an already initialized STE. This causes ste_live BUG_ON() in the driver.
>>
>> Note that this is actually expected behaviour, since Stream ID aliasing
>> has remained officially not supported until a sufficiently compelling
>> reason to do so appears. I always thought the most likely scenario would
>> be a legacy PCI bridge with multiple devices behind it, but even that
>> seems increasingly improbable for a modern SMMUv3-based system to ever see.
> Thanks to Will and Robin for reviewing this. I am pretty new to PCI,
> sorry about that.
> I assumed that the support for stream-id alias is already handled as
> part of this patch:
> https://www.spinics.net/lists/arm-kernel/msg626087.html
> which prevents STE re-initialization. But, what I do not understand is
> why the path
> taken by the arm-smmu-v3 driver misses the aforementioned check for my usecase.

That case is where a single device, due to combinations of PCI DMA 
aliasing conditions, has multiple IDs of its own, and two or more of 
those IDs also happen to end up the same as each other. What you have is 
two distinct devices both claiming the same ID, since apparently they 
both represent the same underlying physical device (I don't know how the 
endpoint and pcieport drivers interoperate and/or coexist, but I can 
easily imagine that some liberties may be taken that the IOMMU layer 
doesn't really anticipate).

>>> I don't understand why the endpoint is using the same stream ID as the root
>>> complex in this case. Why is that? Is the grouping logic not working
>>> properly?
>>
>> It's not so much that it isn't working properly, it's more that it needs
>> to be implemented at all ;)
> The pci_endpoint_test picks up the same of_ DMA config node as the PCI RC
> because they sit on the same PCI bus [via pci_dma_configure( )]
> While in the arm-smmu-v3 driver, I can see that the pci_device_group( ) hands
> over the same iommu group as the Root Complex to the newly added master
> device (pci_endpoint_test in our case) because they share the same stream ID.
> Shouldn't they?

I'd imagine it's most likely that the PCI grouping rules are just 
putting everything together due to a lack of ACS. Either way, I'm pretty 
sure the PCI logic *doesn't* consider actual PCI devices having 
overlapping Requester IDs, because that isn't a real thing (how would 
config accesses work?). You can consider yourself lucky that the devices 
do happen to be grouped already in your particular case, but that 
doesn't change the fact that there's basically no point in trying to 
handle Stream ID aliasing within groups without properly implementing 
the grouping-by-Stream-ID logic in the first place (note that even 
distinct ACS-isolated PCI endpoints could still alias beyond the host 
bridge at the SMMU input if the system's translation from Requester ID 
space to Stream ID space isn't 1:1)

>>>> There is an already existing check in the driver to manage duplicated ids
>>>> if duplicated ids are added in same master device, but there can be
>>>> scenarios like above where we need to extend the check for other masters
>>>> using the same stream-id.
>>>>
>>>> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
>>>> ---
>>>>    drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
>>>>    1 file changed, 33 insertions(+)
>>>
>>> It doesn't feel like the driver is the right place to fix this, as the same
>>> issue could surely occur for other IOMMUs too, right? In which case, I think
>>> we should avoid getting into the situation where different groups have
>>> overlapping stream IDs.
>>
>> Yes, this patch does not represent the correct thing to do either way.
>> The main reason that Stream ID aliasing hasn't been supported so far is
>> that the required Stream ID to group lookup is rather awkward, and
>> adding all of that complexity just for the sake of a rather unlikely
>> possibility seemed dubious. However, PRI support has always had a more
>> pressing need to implement almost the same thing (Stream ID to device),
>> so once that lands we can finally get round to adding the rest of proper
>> group support relatively easily.
> I hope the support will be added soon. Also, can you point me to few drivers
> which already handle this type of stream-ID aliasing?

We handle it in the SMMUv2 driver - the way that architecture does 
stream mapping makes it really easy to hang group pointers off the S2CRs 
and have arm_smmu_master_alloc_smes() and arm_smmu_device_group() work 
nicely together. Unfortunately it's not feasible to take the same 
approach for SMMUv3, since the Stream Table there may be up to 2^32 
entries (vs. up to 128 S2CRs), and there just isn't enough room to 
encode a group pointer directly in an STE itself (you don't want to 
imagine how much time I've spent trying to think up schemes for that...)

Robin.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Robin Murphy]

On 2021-01-12 20:29, Ajay Kumar wrote:
> On Tue, Jan 12, 2021 at 12:57 AM Robin Murphy <robin.murphy@arm.com> wrote:
>>
>> On 2021-01-07 13:03, Will Deacon wrote:
>>> On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
>>>> When PCI function drivers(ex:pci-endpoint-test) are probed for already
>>>> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
>>>> then we encounter a situation where the function driver tries to attach
>>>> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
>>>> an already initialized STE. This causes ste_live BUG_ON() in the driver.
>>
>> Note that this is actually expected behaviour, since Stream ID aliasing
>> has remained officially not supported until a sufficiently compelling
>> reason to do so appears. I always thought the most likely scenario would
>> be a legacy PCI bridge with multiple devices behind it, but even that
>> seems increasingly improbable for a modern SMMUv3-based system to ever see.
> Thanks to Will and Robin for reviewing this. I am pretty new to PCI,
> sorry about that.
> I assumed that the support for stream-id alias is already handled as
> part of this patch:
> https://www.spinics.net/lists/arm-kernel/msg626087.html
> which prevents STE re-initialization. But, what I do not understand is
> why the path
> taken by the arm-smmu-v3 driver misses the aforementioned check for my usecase.

That case is where a single device, due to combinations of PCI DMA 
aliasing conditions, has multiple IDs of its own, and two or more of 
those IDs also happen to end up the same as each other. What you have is 
two distinct devices both claiming the same ID, since apparently they 
both represent the same underlying physical device (I don't know how the 
endpoint and pcieport drivers interoperate and/or coexist, but I can 
easily imagine that some liberties may be taken that the IOMMU layer 
doesn't really anticipate).

>>> I don't understand why the endpoint is using the same stream ID as the root
>>> complex in this case. Why is that? Is the grouping logic not working
>>> properly?
>>
>> It's not so much that it isn't working properly, it's more that it needs
>> to be implemented at all ;)
> The pci_endpoint_test picks up the same of_ DMA config node as the PCI RC
> because they sit on the same PCI bus [via pci_dma_configure( )]
> While in the arm-smmu-v3 driver, I can see that the pci_device_group( ) hands
> over the same iommu group as the Root Complex to the newly added master
> device (pci_endpoint_test in our case) because they share the same stream ID.
> Shouldn't they?

I'd imagine it's most likely that the PCI grouping rules are just 
putting everything together due to a lack of ACS. Either way, I'm pretty 
sure the PCI logic *doesn't* consider actual PCI devices having 
overlapping Requester IDs, because that isn't a real thing (how would 
config accesses work?). You can consider yourself lucky that the devices 
do happen to be grouped already in your particular case, but that 
doesn't change the fact that there's basically no point in trying to 
handle Stream ID aliasing within groups without properly implementing 
the grouping-by-Stream-ID logic in the first place (note that even 
distinct ACS-isolated PCI endpoints could still alias beyond the host 
bridge at the SMMU input if the system's translation from Requester ID 
space to Stream ID space isn't 1:1)

>>>> There is an already existing check in the driver to manage duplicated ids
>>>> if duplicated ids are added in same master device, but there can be
>>>> scenarios like above where we need to extend the check for other masters
>>>> using the same stream-id.
>>>>
>>>> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
>>>> ---
>>>>    drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
>>>>    1 file changed, 33 insertions(+)
>>>
>>> It doesn't feel like the driver is the right place to fix this, as the same
>>> issue could surely occur for other IOMMUs too, right? In which case, I think
>>> we should avoid getting into the situation where different groups have
>>> overlapping stream IDs.
>>
>> Yes, this patch does not represent the correct thing to do either way.
>> The main reason that Stream ID aliasing hasn't been supported so far is
>> that the required Stream ID to group lookup is rather awkward, and
>> adding all of that complexity just for the sake of a rather unlikely
>> possibility seemed dubious. However, PRI support has always had a more
>> pressing need to implement almost the same thing (Stream ID to device),
>> so once that lands we can finally get round to adding the rest of proper
>> group support relatively easily.
> I hope the support will be added soon. Also, can you point me to few drivers
> which already handle this type of stream-ID aliasing?

We handle it in the SMMUv2 driver - the way that architecture does 
stream mapping makes it really easy to hang group pointers off the S2CRs 
and have arm_smmu_master_alloc_smes() and arm_smmu_device_group() work 
nicely together. Unfortunately it's not feasible to take the same 
approach for SMMUv3, since the Stream Table there may be up to 2^32 
entries (vs. up to 128 S2CRs), and there just isn't enough room to 
encode a group pointer directly in an STE itself (you don't want to 
imagine how much time I've spent trying to think up schemes for that...)

Robin.

Re: [PATCH] iommu/arm-smmu-v3: Handle duplicated Stream IDs from other masters

[Robin Murphy]

On 2021-01-12 20:29, Ajay Kumar wrote:
> On Tue, Jan 12, 2021 at 12:57 AM Robin Murphy <robin.murphy@arm.com> wrote:
>>
>> On 2021-01-07 13:03, Will Deacon wrote:
>>> On Thu, Jan 07, 2021 at 03:03:40PM +0530, Ajay Kumar wrote:
>>>> When PCI function drivers(ex:pci-endpoint-test) are probed for already
>>>> initialized PCIe-RC(Root Complex), and PCIe-RC is already bound to SMMU,
>>>> then we encounter a situation where the function driver tries to attach
>>>> itself to the smmu with the same stream-id as PCIe-RC and re-initialize
>>>> an already initialized STE. This causes ste_live BUG_ON() in the driver.
>>
>> Note that this is actually expected behaviour, since Stream ID aliasing
>> has remained officially not supported until a sufficiently compelling
>> reason to do so appears. I always thought the most likely scenario would
>> be a legacy PCI bridge with multiple devices behind it, but even that
>> seems increasingly improbable for a modern SMMUv3-based system to ever see.
> Thanks to Will and Robin for reviewing this. I am pretty new to PCI,
> sorry about that.
> I assumed that the support for stream-id alias is already handled as
> part of this patch:
> https://www.spinics.net/lists/arm-kernel/msg626087.html
> which prevents STE re-initialization. But, what I do not understand is
> why the path
> taken by the arm-smmu-v3 driver misses the aforementioned check for my usecase.

That case is where a single device, due to combinations of PCI DMA 
aliasing conditions, has multiple IDs of its own, and two or more of 
those IDs also happen to end up the same as each other. What you have is 
two distinct devices both claiming the same ID, since apparently they 
both represent the same underlying physical device (I don't know how the 
endpoint and pcieport drivers interoperate and/or coexist, but I can 
easily imagine that some liberties may be taken that the IOMMU layer 
doesn't really anticipate).

>>> I don't understand why the endpoint is using the same stream ID as the root
>>> complex in this case. Why is that? Is the grouping logic not working
>>> properly?
>>
>> It's not so much that it isn't working properly, it's more that it needs
>> to be implemented at all ;)
> The pci_endpoint_test picks up the same of_ DMA config node as the PCI RC
> because they sit on the same PCI bus [via pci_dma_configure( )]
> While in the arm-smmu-v3 driver, I can see that the pci_device_group( ) hands
> over the same iommu group as the Root Complex to the newly added master
> device (pci_endpoint_test in our case) because they share the same stream ID.
> Shouldn't they?

I'd imagine it's most likely that the PCI grouping rules are just 
putting everything together due to a lack of ACS. Either way, I'm pretty 
sure the PCI logic *doesn't* consider actual PCI devices having 
overlapping Requester IDs, because that isn't a real thing (how would 
config accesses work?). You can consider yourself lucky that the devices 
do happen to be grouped already in your particular case, but that 
doesn't change the fact that there's basically no point in trying to 
handle Stream ID aliasing within groups without properly implementing 
the grouping-by-Stream-ID logic in the first place (note that even 
distinct ACS-isolated PCI endpoints could still alias beyond the host 
bridge at the SMMU input if the system's translation from Requester ID 
space to Stream ID space isn't 1:1)

>>>> There is an already existing check in the driver to manage duplicated ids
>>>> if duplicated ids are added in same master device, but there can be
>>>> scenarios like above where we need to extend the check for other masters
>>>> using the same stream-id.
>>>>
>>>> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
>>>> ---
>>>>    drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 33 +++++++++++++++++++++
>>>>    1 file changed, 33 insertions(+)
>>>
>>> It doesn't feel like the driver is the right place to fix this, as the same
>>> issue could surely occur for other IOMMUs too, right? In which case, I think
>>> we should avoid getting into the situation where different groups have
>>> overlapping stream IDs.
>>
>> Yes, this patch does not represent the correct thing to do either way.
>> The main reason that Stream ID aliasing hasn't been supported so far is
>> that the required Stream ID to group lookup is rather awkward, and
>> adding all of that complexity just for the sake of a rather unlikely
>> possibility seemed dubious. However, PRI support has always had a more
>> pressing need to implement almost the same thing (Stream ID to device),
>> so once that lands we can finally get round to adding the rest of proper
>> group support relatively easily.
> I hope the support will be added soon. Also, can you point me to few drivers
> which already handle this type of stream-ID aliasing?

We handle it in the SMMUv2 driver - the way that architecture does 
stream mapping makes it really easy to hang group pointers off the S2CRs 
and have arm_smmu_master_alloc_smes() and arm_smmu_device_group() work 
nicely together. Unfortunately it's not feasible to take the same 
approach for SMMUv3, since the Stream Table there may be up to 2^32 
entries (vs. up to 128 S2CRs), and there just isn't enough room to 
encode a group pointer directly in an STE itself (you don't want to 
imagine how much time I've spent trying to think up schemes for that...)

Robin.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel