From: Rajendra Nayak <rnayak@ti.com>
To: Paul Walmsley <paul@pwsan.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Benoit Cousson <b-cousson@ti.com>,
Kevin Hilman <khilman@deeprootsystems.com>,
Peter Ujfalusi <peter.ujfalusi@nokia.com>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
Jarkko Nikula <jhnikula@gmail.com>,
Liam Girdwood <lrg@slimlogic.co.uk>
Subject: RE: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two
Date: Tue, 14 Dec 2010 20:10:31 +0530 [thread overview]
Message-ID: <a52218d5bcff8d959b86230ce9a7ca89@mail.gmail.com> (raw)
In-Reply-To: <20101208061657.30541.79824.stgit@twilight.localdomain>
> -----Original Message-----
> From: Paul Walmsley [mailto:paul@pwsan.com]
> Sent: Wednesday, December 08, 2010 11:48 AM
> To: linux-omap@vger.kernel.org; linux-arm-kernel@lists.infradead.org
> Cc: Mark Brown; Benoît Cousson; Kevin Hilman; Rajendra Nayak; Peter
Ujfalusi; Santosh Shilimkar; Jarkko Nikula; Liam
> Girdwood
> Subject: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for
2.6.38,part two
>
> This patch series, intended for 2.6.38:
>
> - adds OMAP4-specific PRM and CM instance functions, which are capable
> of writing to PRM/CM instances, no matter what PRCM partition they
> appear in;
>
> - renames the old OMAP2/3 PRM and CM functions to prefix them with
> 'omap2_';
>
> - adds OMAP4 clockdomain offset addressing to the OMAP4 clockdomain
> definitions;
>
> - removes the (now unused) OMAP clockdomain .clkstctrl_reg field;
>
> - moves plat-omap/include/plat/{clock,power}domain.h to mach-omap2/,
since
> these are OMAP2-specific;
>
> - moves the OMAP3 SCM padconf save code from pm34xx.c into the SCM
common
> code.
>
> This series is available via git from git://git.pwsan.com/linux-2.6 in
> the branch 'pwrdm_prcm_b_2.6.38'. It applies on top of the "OMAP:
> PRCM/powerdomain/clockdomain patches for 2.6.38, part one" series,
> sent earlier.
>
> Kevin and OMAP ASoC-hackers, I'd appreciate review and acks, if
> appropriate, on the patches that touch code that you maintain. TI
> OMAP4 PM people, I would appreciate any testing assistance that you
> may be able to provide. Benoît, I've tried to keep the kernel data
> files and the output of the scripts relatively similar, but we might
> need to do some tweaking of the scripts or data files to align them
> in the way that makes the most sense.
>
> Boot-tested on N800, OMAP35xx Beagle, and OMAP4430ES2 Panda.
Boot tested on 2430/3430/4430SDP. Tested RET/OFF mode in suspend
on 3430SDP with minimal config (omap3_pm_defconfig).
>
>
> - Paul
>
> ---
>
> pwrdm_prcm_b_2.6.38
> text data bss dec hex filename
> 5709988 473952 5608800 11792740 b3f164 vmlinux.orig
> 5712868 474496 5608800 11796164 b3fec4 vmlinux.patched
>
> Paul Walmsley (11):
> OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
> OMAP4: PRCM: move global reset function for OMAP4 to an
OMAP4-specific file
> OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
> OMAP4: powerdomains: add PRCM partition data; use OMAP4 PRM
functions
> OMAP2+: clockdomains: split the clkdm hwsup enable/disable
function
> OMAP4: CM instances: add clockdomain register offsets
> OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support
> OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some
direct CM register accesses
> OMAP2+: clockdomain: move header file from plat-omap to mach-omap2
> OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
> OMAP3: control/PM: move padconf save code to mach-omap2/control.c
>
>
> arch/arm/mach-omap2/Makefile | 4
> arch/arm/mach-omap2/clkt2xxx_apll.c | 10 -
> arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 8
> arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 12 -
> arch/arm/mach-omap2/clock.c | 2
> arch/arm/mach-omap2/clockdomain.c | 209 ++++++-----
> arch/arm/mach-omap2/clockdomain.h | 33 +-
> arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c | 42 --
> arch/arm/mach-omap2/clockdomains44xx_data.c | 123 ++++--
> arch/arm/mach-omap2/cm-regbits-24xx.h | 5
> arch/arm/mach-omap2/cm-regbits-34xx.h | 11 +
> arch/arm/mach-omap2/cm1_44xx.h | 10 +
> arch/arm/mach-omap2/cm2_44xx.h | 25 +
> arch/arm/mach-omap2/cm2xxx_3xxx.c | 420
+++++++++++++---------
> arch/arm/mach-omap2/cm2xxx_3xxx.h | 19 +
> arch/arm/mach-omap2/cm44xx.c | 52 +++
> arch/arm/mach-omap2/cm4xxx.c | 62 ---
> arch/arm/mach-omap2/cminst44xx.c | 223 ++++++++++++
> arch/arm/mach-omap2/control.c | 72 +++-
> arch/arm/mach-omap2/control.h | 1
> arch/arm/mach-omap2/cpuidle34xx.c | 4
> arch/arm/mach-omap2/io.c | 4
> arch/arm/mach-omap2/omap_hwmod.c | 4
> arch/arm/mach-omap2/pm-debug.c | 12 -
> arch/arm/mach-omap2/pm.c | 4
> arch/arm/mach-omap2/pm.h | 2
> arch/arm/mach-omap2/pm24xx.c | 200 +++++-----
> arch/arm/mach-omap2/pm34xx.c | 162 ++++----
> arch/arm/mach-omap2/pm44xx.c | 2
> arch/arm/mach-omap2/powerdomain-common.c | 1
> arch/arm/mach-omap2/powerdomain.c | 14 +
> arch/arm/mach-omap2/powerdomain.h | 30 +-
> arch/arm/mach-omap2/powerdomain2xxx_3xxx.c | 68 ++--
> arch/arm/mach-omap2/powerdomain44xx.c | 122 ++++--
> arch/arm/mach-omap2/powerdomains.h | 30 --
> arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c | 4
> arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h | 2
> arch/arm/mach-omap2/powerdomains2xxx_data.c | 3
> arch/arm/mach-omap2/powerdomains3xxx_data.c | 3
> arch/arm/mach-omap2/powerdomains44xx_data.c | 20 +
> arch/arm/mach-omap2/prcm.c | 51 +--
> arch/arm/mach-omap2/prcm44xx.h | 42 ++
> arch/arm/mach-omap2/prcm_mpu44xx.c | 45 ++
> arch/arm/mach-omap2/prcm_mpu44xx.h | 13 +
> arch/arm/mach-omap2/prm2xxx_3xxx.c | 34 +-
> arch/arm/mach-omap2/prm2xxx_3xxx.h | 12 -
> arch/arm/mach-omap2/prm44xx.c | 79 ++++
> arch/arm/mach-omap2/prm44xx.h | 23 +
> arch/arm/mach-omap2/prminst44xx.c | 74 ++++
> arch/arm/mach-omap2/prminst44xx.h | 25 +
> arch/arm/mach-omap2/sdrc2xxx.c | 4
> arch/arm/mach-omap2/serial.c | 1
> arch/arm/plat-omap/gpio.c | 5
> arch/arm/plat-omap/include/plat/gpio.h | 2
> arch/arm/plat-omap/include/plat/omap-pm.h | 2
> arch/arm/plat-omap/include/plat/prcm.h | 10 -
> arch/arm/plat-omap/mcbsp.c | 8
> arch/arm/plat-omap/omap-pm-noop.c | 2
> 58 files changed, 1597 insertions(+), 869 deletions(-)
> rename arch/arm/{plat-omap/include/plat/clockdomain.h =>
mach-omap2/clockdomain.h} (86%)
> create mode 100644 arch/arm/mach-omap2/cm44xx.c
> delete mode 100644 arch/arm/mach-omap2/cm4xxx.c
> create mode 100644 arch/arm/mach-omap2/cminst44xx.c
> rename arch/arm/{plat-omap/include/plat/powerdomain.h =>
mach-omap2/powerdomain.h} (90%)
> delete mode 100644 arch/arm/mach-omap2/powerdomains.h
> create mode 100644 arch/arm/mach-omap2/prcm44xx.h
> create mode 100644 arch/arm/mach-omap2/prcm_mpu44xx.c
> create mode 100644 arch/arm/mach-omap2/prminst44xx.c
> create mode 100644 arch/arm/mach-omap2/prminst44xx.h
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two
Date: Tue, 14 Dec 2010 20:10:31 +0530 [thread overview]
Message-ID: <a52218d5bcff8d959b86230ce9a7ca89@mail.gmail.com> (raw)
In-Reply-To: <20101208061657.30541.79824.stgit@twilight.localdomain>
> -----Original Message-----
> From: Paul Walmsley [mailto:paul at pwsan.com]
> Sent: Wednesday, December 08, 2010 11:48 AM
> To: linux-omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org
> Cc: Mark Brown; Beno?t Cousson; Kevin Hilman; Rajendra Nayak; Peter
Ujfalusi; Santosh Shilimkar; Jarkko Nikula; Liam
> Girdwood
> Subject: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for
2.6.38,part two
>
> This patch series, intended for 2.6.38:
>
> - adds OMAP4-specific PRM and CM instance functions, which are capable
> of writing to PRM/CM instances, no matter what PRCM partition they
> appear in;
>
> - renames the old OMAP2/3 PRM and CM functions to prefix them with
> 'omap2_';
>
> - adds OMAP4 clockdomain offset addressing to the OMAP4 clockdomain
> definitions;
>
> - removes the (now unused) OMAP clockdomain .clkstctrl_reg field;
>
> - moves plat-omap/include/plat/{clock,power}domain.h to mach-omap2/,
since
> these are OMAP2-specific;
>
> - moves the OMAP3 SCM padconf save code from pm34xx.c into the SCM
common
> code.
>
> This series is available via git from git://git.pwsan.com/linux-2.6 in
> the branch 'pwrdm_prcm_b_2.6.38'. It applies on top of the "OMAP:
> PRCM/powerdomain/clockdomain patches for 2.6.38, part one" series,
> sent earlier.
>
> Kevin and OMAP ASoC-hackers, I'd appreciate review and acks, if
> appropriate, on the patches that touch code that you maintain. TI
> OMAP4 PM people, I would appreciate any testing assistance that you
> may be able to provide. Beno?t, I've tried to keep the kernel data
> files and the output of the scripts relatively similar, but we might
> need to do some tweaking of the scripts or data files to align them
> in the way that makes the most sense.
>
> Boot-tested on N800, OMAP35xx Beagle, and OMAP4430ES2 Panda.
Boot tested on 2430/3430/4430SDP. Tested RET/OFF mode in suspend
on 3430SDP with minimal config (omap3_pm_defconfig).
>
>
> - Paul
>
> ---
>
> pwrdm_prcm_b_2.6.38
> text data bss dec hex filename
> 5709988 473952 5608800 11792740 b3f164 vmlinux.orig
> 5712868 474496 5608800 11796164 b3fec4 vmlinux.patched
>
> Paul Walmsley (11):
> OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
> OMAP4: PRCM: move global reset function for OMAP4 to an
OMAP4-specific file
> OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
> OMAP4: powerdomains: add PRCM partition data; use OMAP4 PRM
functions
> OMAP2+: clockdomains: split the clkdm hwsup enable/disable
function
> OMAP4: CM instances: add clockdomain register offsets
> OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support
> OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some
direct CM register accesses
> OMAP2+: clockdomain: move header file from plat-omap to mach-omap2
> OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
> OMAP3: control/PM: move padconf save code to mach-omap2/control.c
>
>
> arch/arm/mach-omap2/Makefile | 4
> arch/arm/mach-omap2/clkt2xxx_apll.c | 10 -
> arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 8
> arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 12 -
> arch/arm/mach-omap2/clock.c | 2
> arch/arm/mach-omap2/clockdomain.c | 209 ++++++-----
> arch/arm/mach-omap2/clockdomain.h | 33 +-
> arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c | 42 --
> arch/arm/mach-omap2/clockdomains44xx_data.c | 123 ++++--
> arch/arm/mach-omap2/cm-regbits-24xx.h | 5
> arch/arm/mach-omap2/cm-regbits-34xx.h | 11 +
> arch/arm/mach-omap2/cm1_44xx.h | 10 +
> arch/arm/mach-omap2/cm2_44xx.h | 25 +
> arch/arm/mach-omap2/cm2xxx_3xxx.c | 420
+++++++++++++---------
> arch/arm/mach-omap2/cm2xxx_3xxx.h | 19 +
> arch/arm/mach-omap2/cm44xx.c | 52 +++
> arch/arm/mach-omap2/cm4xxx.c | 62 ---
> arch/arm/mach-omap2/cminst44xx.c | 223 ++++++++++++
> arch/arm/mach-omap2/control.c | 72 +++-
> arch/arm/mach-omap2/control.h | 1
> arch/arm/mach-omap2/cpuidle34xx.c | 4
> arch/arm/mach-omap2/io.c | 4
> arch/arm/mach-omap2/omap_hwmod.c | 4
> arch/arm/mach-omap2/pm-debug.c | 12 -
> arch/arm/mach-omap2/pm.c | 4
> arch/arm/mach-omap2/pm.h | 2
> arch/arm/mach-omap2/pm24xx.c | 200 +++++-----
> arch/arm/mach-omap2/pm34xx.c | 162 ++++----
> arch/arm/mach-omap2/pm44xx.c | 2
> arch/arm/mach-omap2/powerdomain-common.c | 1
> arch/arm/mach-omap2/powerdomain.c | 14 +
> arch/arm/mach-omap2/powerdomain.h | 30 +-
> arch/arm/mach-omap2/powerdomain2xxx_3xxx.c | 68 ++--
> arch/arm/mach-omap2/powerdomain44xx.c | 122 ++++--
> arch/arm/mach-omap2/powerdomains.h | 30 --
> arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c | 4
> arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h | 2
> arch/arm/mach-omap2/powerdomains2xxx_data.c | 3
> arch/arm/mach-omap2/powerdomains3xxx_data.c | 3
> arch/arm/mach-omap2/powerdomains44xx_data.c | 20 +
> arch/arm/mach-omap2/prcm.c | 51 +--
> arch/arm/mach-omap2/prcm44xx.h | 42 ++
> arch/arm/mach-omap2/prcm_mpu44xx.c | 45 ++
> arch/arm/mach-omap2/prcm_mpu44xx.h | 13 +
> arch/arm/mach-omap2/prm2xxx_3xxx.c | 34 +-
> arch/arm/mach-omap2/prm2xxx_3xxx.h | 12 -
> arch/arm/mach-omap2/prm44xx.c | 79 ++++
> arch/arm/mach-omap2/prm44xx.h | 23 +
> arch/arm/mach-omap2/prminst44xx.c | 74 ++++
> arch/arm/mach-omap2/prminst44xx.h | 25 +
> arch/arm/mach-omap2/sdrc2xxx.c | 4
> arch/arm/mach-omap2/serial.c | 1
> arch/arm/plat-omap/gpio.c | 5
> arch/arm/plat-omap/include/plat/gpio.h | 2
> arch/arm/plat-omap/include/plat/omap-pm.h | 2
> arch/arm/plat-omap/include/plat/prcm.h | 10 -
> arch/arm/plat-omap/mcbsp.c | 8
> arch/arm/plat-omap/omap-pm-noop.c | 2
> 58 files changed, 1597 insertions(+), 869 deletions(-)
> rename arch/arm/{plat-omap/include/plat/clockdomain.h =>
mach-omap2/clockdomain.h} (86%)
> create mode 100644 arch/arm/mach-omap2/cm44xx.c
> delete mode 100644 arch/arm/mach-omap2/cm4xxx.c
> create mode 100644 arch/arm/mach-omap2/cminst44xx.c
> rename arch/arm/{plat-omap/include/plat/powerdomain.h =>
mach-omap2/powerdomain.h} (90%)
> delete mode 100644 arch/arm/mach-omap2/powerdomains.h
> create mode 100644 arch/arm/mach-omap2/prcm44xx.h
> create mode 100644 arch/arm/mach-omap2/prcm_mpu44xx.c
> create mode 100644 arch/arm/mach-omap2/prminst44xx.c
> create mode 100644 arch/arm/mach-omap2/prminst44xx.h
next prev parent reply other threads:[~2010-12-14 14:40 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-08 6:18 [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part two Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutator functions Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-08 9:48 ` [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions Santosh Shilimkar
2010-12-08 9:48 ` Santosh Shilimkar
2010-12-11 1:55 ` Paul Walmsley
2010-12-11 1:55 ` Paul Walmsley
2010-12-11 7:32 ` Santosh Shilimkar
2010-12-11 7:32 ` Santosh Shilimkar
2010-12-08 12:33 ` Rajendra Nayak
2010-12-08 12:33 ` Rajendra Nayak
2010-12-15 6:48 ` Paul Walmsley
2010-12-15 6:48 ` Paul Walmsley
2010-12-15 11:08 ` Rajendra Nayak
2010-12-15 11:08 ` Rajendra Nayak
2010-12-15 11:57 ` Santosh Shilimkar
2010-12-15 11:57 ` Santosh Shilimkar
2010-12-15 12:43 ` Cousson, Benoit
2010-12-15 12:43 ` Cousson, Benoit
2010-12-18 10:47 ` Paul Walmsley
2010-12-18 10:47 ` Paul Walmsley
2010-12-08 13:50 ` Rajendra Nayak
2010-12-08 13:50 ` Rajendra Nayak
2010-12-08 19:46 ` Paul Walmsley
2010-12-08 19:46 ` Paul Walmsley
2010-12-08 20:16 ` Paul Walmsley
2010-12-08 20:16 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 02/11] OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 03/11] OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 04/11] OMAP4: powerdomains: add PRCM partition data; use OMAP4 PRM functions Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 05/11] OMAP2+: clockdomains: split the clkdm hwsup enable/disable function Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-08 23:12 ` Kevin Hilman
2010-12-08 23:12 ` Kevin Hilman
2010-12-09 0:00 ` Paul Walmsley
2010-12-09 0:00 ` Paul Walmsley
2010-12-11 1:36 ` Paul Walmsley
2010-12-11 1:36 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 06/11] OMAP4: CM instances: add clockdomain register offsets Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 07/11] OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 08/11] OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 09/11] OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-15 5:39 ` Paul Walmsley
2010-12-15 5:39 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 10/11] OMAP2+: powerdomain: " Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-15 5:37 ` Paul Walmsley
2010-12-15 5:37 ` Paul Walmsley
2010-12-15 5:51 ` Paul Walmsley
2010-12-15 5:51 ` Paul Walmsley
2010-12-08 6:18 ` [PATCH 11/11] OMAP3: control/PM: move padconf save code to mach-omap2/control.c Paul Walmsley
2010-12-08 6:18 ` Paul Walmsley
2010-12-09 14:19 ` [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part two Jarkko Nikula
2010-12-09 14:19 ` Jarkko Nikula
2010-12-09 17:41 ` Paul Walmsley
2010-12-09 17:41 ` Paul Walmsley
2010-12-14 14:40 ` Rajendra Nayak [this message]
2010-12-14 14:40 ` [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two Rajendra Nayak
2010-12-15 3:57 ` Paul Walmsley
2010-12-15 3:57 ` Paul Walmsley
2010-12-15 11:14 ` Rajendra Nayak
2010-12-15 11:14 ` Rajendra Nayak
2010-12-15 4:15 ` Santosh Shilimkar
2010-12-15 4:15 ` Santosh Shilimkar
2010-12-15 4:27 ` Paul Walmsley
2010-12-15 4:27 ` Paul Walmsley
2010-12-15 6:15 ` Santosh Shilimkar
2010-12-15 6:15 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a52218d5bcff8d959b86230ce9a7ca89@mail.gmail.com \
--to=rnayak@ti.com \
--cc=b-cousson@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=jhnikula@gmail.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
--cc=paul@pwsan.com \
--cc=peter.ujfalusi@nokia.com \
--cc=santosh.shilimkar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.