From: Tamizh chelvam <tamizhr@codeaurora.org>
To: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Cc: johannes@sipsolutions.net, linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Subject: Re: [PATCH 3/4] mac80211: Add api to support configuring TID specific configuration
Date: Thu, 08 Nov 2018 18:12:49 +0530 [thread overview]
Message-ID: <a6161336017a59081c24f86a17fee014@codeaurora.org> (raw)
In-Reply-To: <20181106103325.5phrwo2pv2rc26pd@bars>
On 2018-11-06 16:03, Sergey Matyukevich wrote:
>> Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
>> ---
>> include/net/mac80211.h | 40 +++++++++++++++++++++++++
>> net/mac80211/cfg.c | 71
>> +++++++++++++++++++++++++++++++++++++++++++++
>> net/mac80211/driver-ops.h | 16 ++++++++++
>> net/mac80211/trace.h | 34 ++++++++++++++++++++++
>> 4 files changed, 161 insertions(+)
>>
>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h
>> index b6cc3e33..7fa7e25 100644
>> --- a/include/net/mac80211.h
>> +++ b/include/net/mac80211.h
>> @@ -1478,6 +1478,35 @@ struct ieee80211_channel_switch {
>> u8 count;
>> };
>>
>> +/*
>> + * enum ieee80211_tid_conf_change - TID change configuration
>> notification flags
>> + *
>> + * These flags are used with the set_tid_conf() callback
>> + * to indicate which TID configuration parameter changed.
>> + *
>> + * @TID_RETRY_CONF_CHANGED: retry configuration changed.
>> + * @TID_AGGR_CONF_CHANGED: Aggregation config changed for the TID.
>> + */
>> +enum ieee80211_tid_conf_change {
>> + TID_RETRY_CONF_CHANGED = BIT(0),
>> + TID_AGGR_CONF_CHANGED = BIT(1),
>> +};
>
> Following your approach, AMSDU support can be added in addition to
> AMPDU. So I would suggest to replace AGGR by AMPDU right away.
>
>> +
>> +/*
>> + * struct ieee80211_tid_conf - holds the tid configiuration data
>> + * The information provided in the structure is required for the
>> driver
>> + * to configure TID specific configuration.
>> + * @tid: TID number
>> + * @retry_short: retry count value
>> + * @retry_long: retry count value
>> + * @aggr: enable/disable aggregation
>> + */
>> +struct ieee80211_tid_conf {
>> + u8 tid;
>> + int retry_short;
>> + int retry_long;
>> + bool aggr;
>> +};
>
> ditto: aggr -> ampdu
>
Sure. I'll update in the next version.
Thanks,
Tamizh.
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: Tamizh chelvam <tamizhr@codeaurora.org>
To: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Cc: ath10k@lists.infradead.org, johannes@sipsolutions.net,
linux-wireless@vger.kernel.org
Subject: Re: [PATCH 3/4] mac80211: Add api to support configuring TID specific configuration
Date: Thu, 08 Nov 2018 18:12:49 +0530 [thread overview]
Message-ID: <a6161336017a59081c24f86a17fee014@codeaurora.org> (raw)
In-Reply-To: <20181106103325.5phrwo2pv2rc26pd@bars>
On 2018-11-06 16:03, Sergey Matyukevich wrote:
>> Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
>> ---
>> include/net/mac80211.h | 40 +++++++++++++++++++++++++
>> net/mac80211/cfg.c | 71
>> +++++++++++++++++++++++++++++++++++++++++++++
>> net/mac80211/driver-ops.h | 16 ++++++++++
>> net/mac80211/trace.h | 34 ++++++++++++++++++++++
>> 4 files changed, 161 insertions(+)
>>
>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h
>> index b6cc3e33..7fa7e25 100644
>> --- a/include/net/mac80211.h
>> +++ b/include/net/mac80211.h
>> @@ -1478,6 +1478,35 @@ struct ieee80211_channel_switch {
>> u8 count;
>> };
>>
>> +/*
>> + * enum ieee80211_tid_conf_change - TID change configuration
>> notification flags
>> + *
>> + * These flags are used with the set_tid_conf() callback
>> + * to indicate which TID configuration parameter changed.
>> + *
>> + * @TID_RETRY_CONF_CHANGED: retry configuration changed.
>> + * @TID_AGGR_CONF_CHANGED: Aggregation config changed for the TID.
>> + */
>> +enum ieee80211_tid_conf_change {
>> + TID_RETRY_CONF_CHANGED = BIT(0),
>> + TID_AGGR_CONF_CHANGED = BIT(1),
>> +};
>
> Following your approach, AMSDU support can be added in addition to
> AMPDU. So I would suggest to replace AGGR by AMPDU right away.
>
>> +
>> +/*
>> + * struct ieee80211_tid_conf - holds the tid configiuration data
>> + * The information provided in the structure is required for the
>> driver
>> + * to configure TID specific configuration.
>> + * @tid: TID number
>> + * @retry_short: retry count value
>> + * @retry_long: retry count value
>> + * @aggr: enable/disable aggregation
>> + */
>> +struct ieee80211_tid_conf {
>> + u8 tid;
>> + int retry_short;
>> + int retry_long;
>> + bool aggr;
>> +};
>
> ditto: aggr -> ampdu
>
Sure. I'll update in the next version.
Thanks,
Tamizh.
next prev parent reply other threads:[~2018-11-08 12:43 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-22 17:55 [PATCH 0/4] cfg80211/mac80211: Add support for TID specific configuration Tamizh chelvam
2018-10-22 17:55 ` Tamizh chelvam
2018-10-22 17:55 ` [PATCH 1/4] New netlink command " Tamizh chelvam
2018-10-22 17:55 ` Tamizh chelvam
2018-11-06 10:16 ` Sergey Matyukevich
2018-11-06 10:16 ` Sergey Matyukevich
2018-11-08 17:29 ` Tamizh chelvam
2018-11-08 17:29 ` Tamizh chelvam
2018-11-09 9:47 ` Sergey Matyukevich
2018-11-09 9:47 ` Sergey Matyukevich
2018-11-06 11:31 ` Johannes Berg
2018-11-06 11:31 ` Johannes Berg
2018-11-07 14:05 ` Sergey Matyukevich
2018-11-07 14:05 ` Sergey Matyukevich
2018-11-08 17:47 ` Tamizh chelvam
2018-11-08 17:47 ` Tamizh chelvam
2018-11-09 9:40 ` Sergey Matyukevich
2018-11-09 9:40 ` Sergey Matyukevich
2018-11-09 12:24 ` Johannes Berg
2018-11-09 12:24 ` Johannes Berg
2018-11-13 6:46 ` Tamizh chelvam
2018-11-13 6:46 ` Tamizh chelvam
2018-11-09 11:37 ` Johannes Berg
2018-11-09 11:37 ` Johannes Berg
2018-10-22 17:55 ` [PATCH 2/4] nl80211: Add netlink attribute for AMPDU aggregation enable/disable Tamizh chelvam
2018-10-22 17:55 ` Tamizh chelvam
2018-11-06 10:21 ` Sergey Matyukevich
2018-11-06 10:21 ` Sergey Matyukevich
2018-11-08 12:28 ` Tamizh chelvam
2018-11-08 12:28 ` Tamizh chelvam
2018-10-22 17:55 ` [PATCH 3/4] mac80211: Add api to support configuring TID specific configuration Tamizh chelvam
2018-10-22 17:55 ` Tamizh chelvam
2018-11-06 10:33 ` Sergey Matyukevich
2018-11-06 10:33 ` Sergey Matyukevich
2018-11-08 12:42 ` Tamizh chelvam [this message]
2018-11-08 12:42 ` Tamizh chelvam
2018-11-07 23:55 ` Igor Mitsyanko
2018-11-07 23:55 ` Igor Mitsyanko
2018-10-22 17:55 ` [PATCH 4/4] ath10k: Add support to configure " Tamizh chelvam
2018-10-22 17:55 ` Tamizh chelvam
2018-11-09 9:26 ` Sergey Matyukevich
2018-11-09 9:26 ` Sergey Matyukevich
2018-11-05 20:43 ` [PATCH 0/4] cfg80211/mac80211: Add support for " Johannes Berg
2018-11-05 20:43 ` Johannes Berg
2018-11-06 10:45 ` Sergey Matyukevich
2018-11-06 10:45 ` Sergey Matyukevich
2018-11-06 11:28 ` Johannes Berg
2018-11-06 11:28 ` Johannes Berg
2018-11-06 12:17 ` Sergey Matyukevich
2018-11-06 12:17 ` Sergey Matyukevich
2018-11-08 0:55 ` Igor Mitsyanko
2018-11-08 0:55 ` Igor Mitsyanko
2018-11-08 16:31 ` Ben Greear
2018-11-08 16:31 ` Ben Greear
2019-02-13 19:01 ` Sergey Matyukevich
2019-02-13 19:01 ` Sergey Matyukevich
[not found] ` <a7d97b692da245a8b85769d7766ceba7@aphydexm01f.ap.qualcomm.com>
2019-02-14 7:14 ` Tamizh chelvam
2019-02-14 7:14 ` Tamizh chelvam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a6161336017a59081c24f86a17fee014@codeaurora.org \
--to=tamizhr@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=sergey.matyukevich.os@quantenna.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.