Re: [PATCH v3 12/12] docs: iio: add ADXL313 accelerometer

[Bagas Sanjaya <bagasdotme@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1708 bytes --]

On Fri, May 23, 2025 at 10:35:23PM +0000, Lothar Rubusch wrote:
> +A channel value can be read from its _raw attribute. The value returned is the
> +raw value as reported by the devices. To get the processed value of the channel,
> +apply the following formula:
> +
> +.. code-block:: bash
> +
> +        processed value = (_raw + _offset) * _scale

No syntax highlighting should be appropriate for this block.

> +Show accelerometer channels value:
> +
> +.. code-block:: bash
> +
> +        root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw
> +        2
> +        root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw
> +        -57
> +        root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw
> +        2
> +        root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale
> +        0.009576806
> +

The accelerometer values will be:

> +- X-axis acceleration = in_accel_x_raw * in_accel_scale = 0.0191536 m/s^2
> +- Y-axis acceleration = in_accel_y_raw * in_accel_scale = -0.5458779 m/s^2
> +- Z-axis acceleration = in_accel_z_raw * in_accel_scale = 0.0191536 m/s^2
> +
> +Set calibration offset for accelerometer channels. Note, the calibration will be
> +rounded according to the graduation of LSB units:

"Note that the calibration ..."

> +See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered
> +data is structured.
> +
> +4. IIO Interfacing Tools
> +========================
> +
> +See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO

Do not inline docs cross-references to make them internal links.

Thanks.

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]