* [PATCH RESEND] perf stat: Fix JSON output formatting in iostat_prefix()
@ 2025-05-20 9:45 Suchit Karunakaran
2025-05-28 18:07 ` Arnaldo Carvalho de Melo
0 siblings, 1 reply; 6+ messages in thread
From: Suchit Karunakaran @ 2025-05-20 9:45 UTC (permalink / raw)
To: peterz, mingo, acme, namhyung, mark.rutland, alexander.shishkin
Cc: linux-perf-users, linux-kernel-mentees, linux-kernel, skhan,
Suchit Karunakaran
The iostat_prefix() function previously included a TODO noting that its output
format was incorrect in JSON mode. This patch corrects that by conditionally
formatting the prefix string based on the output mode specified in
perf_stat_config.
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
---
tools/perf/arch/x86/util/iostat.c | 35 ++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 12 deletions(-)
diff --git a/tools/perf/arch/x86/util/iostat.c b/tools/perf/arch/x86/util/iostat.c
index 7442a2cd87ed..1d9c20dab5c7 100644
--- a/tools/perf/arch/x86/util/iostat.c
+++ b/tools/perf/arch/x86/util/iostat.c
@@ -403,18 +403,29 @@ void iostat_prefix(struct evlist *evlist,
struct iio_root_port *rp = evlist->selected->priv;
if (rp) {
- /*
- * TODO: This is the incorrect format in JSON mode.
- * See prepare_timestamp()
- */
- if (ts)
- sprintf(prefix, "%6lu.%09lu%s%04x:%02x%s",
- ts->tv_sec, ts->tv_nsec,
- config->csv_sep, rp->domain, rp->bus,
- config->csv_sep);
- else
- sprintf(prefix, "%04x:%02x%s", rp->domain, rp->bus,
- config->csv_sep);
+ if (ts) {
+ if (config->json_output)
+ sprintf(prefix,
+ "\"interval\" : %lu.%09lu, \"device\" : \"%04x:%02x\"",
+ (unsigned long)ts->tv_sec, ts->tv_nsec,
+ rp->domain, rp->bus);
+ else if (config->csv_output)
+ sprintf(prefix, "%lu.%09lu%s%04x:%02x%s",
+ (unsigned long)ts->tv_sec, ts->tv_nsec,
+ config->csv_sep,
+ rp->domain, rp->bus, config->csv_sep);
+ else
+ sprintf(prefix, "%6lu.%09lu %04x:%02x%s",
+ (unsigned long)ts->tv_sec, ts->tv_nsec,
+ rp->domain, rp->bus, config->csv_sep);
+ } else {
+ if (config->json_output)
+ sprintf(prefix, "\"device\" : \"%04x:%02x\"",
+ rp->domain, rp->bus);
+ else
+ sprintf(prefix, "%04x:%02x%s", rp->domain,
+ rp->bus, config->csv_sep);
+ }
}
}
--
2.49.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH RESEND] perf stat: Fix JSON output formatting in iostat_prefix()
2025-05-20 9:45 Suchit Karunakaran
@ 2025-05-28 18:07 ` Arnaldo Carvalho de Melo
0 siblings, 0 replies; 6+ messages in thread
From: Arnaldo Carvalho de Melo @ 2025-05-28 18:07 UTC (permalink / raw)
To: Suchit Karunakaran
Cc: Yicong Yang, Jonathan Cameron, Junhao He, Mark Rutland,
Peter Zijlstra, Shameerali Kolothum Thodi, Ingo Molnar,
Namhyung Kim, alexander.shishkin, linux-perf-users,
linux-kernel-mentees, linux-kernel, skhan
On Tue, May 20, 2025 at 03:15:25PM +0530, Suchit Karunakaran wrote:
> The iostat_prefix() function previously included a TODO noting that its output
> format was incorrect in JSON mode. This patch corrects that by conditionally
> formatting the prefix string based on the output mode specified in
> perf_stat_config.
O don't have how to test this as I dont have:
access("/sys/bus/event_source/devices/uncore_iio_0", F_OK) = -1 ENOENT (No such file or directory)
write(2, ""..., 37Unsupported uncore pmu configuration
) = 37
write(2, ""..., 43
Usage: perf stat [<options>] [<command>]
) = 43
write(2, ""..., 1
<SNIP>
write(2, ""..., 84 measure I/O performance metrics provided by arch/platform
) = 84
exit_group(129) = ?
+++ exited with 129 +++
root@x1:~# strace -s0 perf stat --iostat --timeout 1000
Could someone with access to hardware with this capability to try this
patch and provide a Tested-by?
- Arnaldo
> Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
> ---
> tools/perf/arch/x86/util/iostat.c | 35 ++++++++++++++++++++-----------
> 1 file changed, 23 insertions(+), 12 deletions(-)
>
> diff --git a/tools/perf/arch/x86/util/iostat.c b/tools/perf/arch/x86/util/iostat.c
> index 7442a2cd87ed..1d9c20dab5c7 100644
> --- a/tools/perf/arch/x86/util/iostat.c
> +++ b/tools/perf/arch/x86/util/iostat.c
> @@ -403,18 +403,29 @@ void iostat_prefix(struct evlist *evlist,
> struct iio_root_port *rp = evlist->selected->priv;
>
> if (rp) {
> - /*
> - * TODO: This is the incorrect format in JSON mode.
> - * See prepare_timestamp()
> - */
> - if (ts)
> - sprintf(prefix, "%6lu.%09lu%s%04x:%02x%s",
> - ts->tv_sec, ts->tv_nsec,
> - config->csv_sep, rp->domain, rp->bus,
> - config->csv_sep);
> - else
> - sprintf(prefix, "%04x:%02x%s", rp->domain, rp->bus,
> - config->csv_sep);
> + if (ts) {
> + if (config->json_output)
> + sprintf(prefix,
> + "\"interval\" : %lu.%09lu, \"device\" : \"%04x:%02x\"",
> + (unsigned long)ts->tv_sec, ts->tv_nsec,
> + rp->domain, rp->bus);
> + else if (config->csv_output)
> + sprintf(prefix, "%lu.%09lu%s%04x:%02x%s",
> + (unsigned long)ts->tv_sec, ts->tv_nsec,
> + config->csv_sep,
> + rp->domain, rp->bus, config->csv_sep);
> + else
> + sprintf(prefix, "%6lu.%09lu %04x:%02x%s",
> + (unsigned long)ts->tv_sec, ts->tv_nsec,
> + rp->domain, rp->bus, config->csv_sep);
> + } else {
> + if (config->json_output)
> + sprintf(prefix, "\"device\" : \"%04x:%02x\"",
> + rp->domain, rp->bus);
> + else
> + sprintf(prefix, "%04x:%02x%s", rp->domain,
> + rp->bus, config->csv_sep);
> + }
> }
> }
>
> --
> 2.49.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH RESEND] perf stat: Fix JSON output formatting in iostat_prefix()
@ 2025-06-05 18:00 Suchit Karunakaran
2025-06-06 3:57 ` Namhyung Kim
0 siblings, 1 reply; 6+ messages in thread
From: Suchit Karunakaran @ 2025-06-05 18:00 UTC (permalink / raw)
To: peterz, mingo, acme, namhyung, mark.rutland, alexander.shishkin
Cc: linux-perf-users, linux-kernel-mentees, linux-kernel, skhan,
Suchit Karunakaran
The iostat_prefix() function previously included a TODO noting that its output
format was incorrect in JSON mode. This patch corrects that by conditionally
formatting the prefix string based on the output mode specified in
perf_stat_config.
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
---
tools/perf/arch/x86/util/iostat.c | 35 ++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 12 deletions(-)
diff --git a/tools/perf/arch/x86/util/iostat.c b/tools/perf/arch/x86/util/iostat.c
index 7442a2cd87ed..1d9c20dab5c7 100644
--- a/tools/perf/arch/x86/util/iostat.c
+++ b/tools/perf/arch/x86/util/iostat.c
@@ -403,18 +403,29 @@ void iostat_prefix(struct evlist *evlist,
struct iio_root_port *rp = evlist->selected->priv;
if (rp) {
- /*
- * TODO: This is the incorrect format in JSON mode.
- * See prepare_timestamp()
- */
- if (ts)
- sprintf(prefix, "%6lu.%09lu%s%04x:%02x%s",
- ts->tv_sec, ts->tv_nsec,
- config->csv_sep, rp->domain, rp->bus,
- config->csv_sep);
- else
- sprintf(prefix, "%04x:%02x%s", rp->domain, rp->bus,
- config->csv_sep);
+ if (ts) {
+ if (config->json_output)
+ sprintf(prefix,
+ "\"interval\" : %lu.%09lu, \"device\" : \"%04x:%02x\"",
+ (unsigned long)ts->tv_sec, ts->tv_nsec,
+ rp->domain, rp->bus);
+ else if (config->csv_output)
+ sprintf(prefix, "%lu.%09lu%s%04x:%02x%s",
+ (unsigned long)ts->tv_sec, ts->tv_nsec,
+ config->csv_sep,
+ rp->domain, rp->bus, config->csv_sep);
+ else
+ sprintf(prefix, "%6lu.%09lu %04x:%02x%s",
+ (unsigned long)ts->tv_sec, ts->tv_nsec,
+ rp->domain, rp->bus, config->csv_sep);
+ } else {
+ if (config->json_output)
+ sprintf(prefix, "\"device\" : \"%04x:%02x\"",
+ rp->domain, rp->bus);
+ else
+ sprintf(prefix, "%04x:%02x%s", rp->domain,
+ rp->bus, config->csv_sep);
+ }
}
}
--
2.49.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH RESEND] perf stat: Fix JSON output formatting in iostat_prefix()
2025-06-05 18:00 [PATCH RESEND] perf stat: Fix JSON output formatting in iostat_prefix() Suchit Karunakaran
@ 2025-06-06 3:57 ` Namhyung Kim
2025-06-06 4:34 ` Suchit K
0 siblings, 1 reply; 6+ messages in thread
From: Namhyung Kim @ 2025-06-06 3:57 UTC (permalink / raw)
To: Suchit Karunakaran
Cc: peterz, mingo, acme, mark.rutland, alexander.shishkin,
linux-perf-users, linux-kernel-mentees, linux-kernel, skhan
Hello,
On Thu, Jun 05, 2025 at 11:30:11PM +0530, Suchit Karunakaran wrote:
> The iostat_prefix() function previously included a TODO noting that its output
> format was incorrect in JSON mode. This patch corrects that by conditionally
> formatting the prefix string based on the output mode specified in
> perf_stat_config.
I've tested this. It doesn't work well.
Before:
# ./perf iostat -j -I 1000 true
# time port 0.000517525 0000:00 "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
0.000517525 0000:80
0.000517525 0000:17 , "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
0.000517525 0000:85
0.000517525 0000:3a , "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
0.000517525 0000:ae
0.000517525 0000:5d , "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
0.000517525 0000:d7
After:
# ./perf iostat -j -I 1000 true
# time port "interval" : 0.000463559, "device" : "0000:00""Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
"interval" : 0.000463559, "device" : "0000:80"
"interval" : 0.000463559, "device" : "0000:17", "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
"interval" : 0.000463559, "device" : "0000:85"
"interval" : 0.000463559, "device" : "0000:3a", "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
"interval" : 0.000463559, "device" : "0000:ae"
"interval" : 0.000463559, "device" : "0000:5d", "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
"interval" : 0.000463559, "device" : "0000:d7"
Thanks,
Namhyung
>
> Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
> ---
> tools/perf/arch/x86/util/iostat.c | 35 ++++++++++++++++++++-----------
> 1 file changed, 23 insertions(+), 12 deletions(-)
>
> diff --git a/tools/perf/arch/x86/util/iostat.c b/tools/perf/arch/x86/util/iostat.c
> index 7442a2cd87ed..1d9c20dab5c7 100644
> --- a/tools/perf/arch/x86/util/iostat.c
> +++ b/tools/perf/arch/x86/util/iostat.c
> @@ -403,18 +403,29 @@ void iostat_prefix(struct evlist *evlist,
> struct iio_root_port *rp = evlist->selected->priv;
>
> if (rp) {
> - /*
> - * TODO: This is the incorrect format in JSON mode.
> - * See prepare_timestamp()
> - */
> - if (ts)
> - sprintf(prefix, "%6lu.%09lu%s%04x:%02x%s",
> - ts->tv_sec, ts->tv_nsec,
> - config->csv_sep, rp->domain, rp->bus,
> - config->csv_sep);
> - else
> - sprintf(prefix, "%04x:%02x%s", rp->domain, rp->bus,
> - config->csv_sep);
> + if (ts) {
> + if (config->json_output)
> + sprintf(prefix,
> + "\"interval\" : %lu.%09lu, \"device\" : \"%04x:%02x\"",
> + (unsigned long)ts->tv_sec, ts->tv_nsec,
> + rp->domain, rp->bus);
> + else if (config->csv_output)
> + sprintf(prefix, "%lu.%09lu%s%04x:%02x%s",
> + (unsigned long)ts->tv_sec, ts->tv_nsec,
> + config->csv_sep,
> + rp->domain, rp->bus, config->csv_sep);
> + else
> + sprintf(prefix, "%6lu.%09lu %04x:%02x%s",
> + (unsigned long)ts->tv_sec, ts->tv_nsec,
> + rp->domain, rp->bus, config->csv_sep);
> + } else {
> + if (config->json_output)
> + sprintf(prefix, "\"device\" : \"%04x:%02x\"",
> + rp->domain, rp->bus);
> + else
> + sprintf(prefix, "%04x:%02x%s", rp->domain,
> + rp->bus, config->csv_sep);
> + }
> }
> }
>
> --
> 2.49.0
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH RESEND] perf stat: Fix JSON output formatting in iostat_prefix()
2025-06-06 3:57 ` Namhyung Kim
@ 2025-06-06 4:34 ` Suchit K
2025-06-06 17:29 ` Namhyung Kim
0 siblings, 1 reply; 6+ messages in thread
From: Suchit K @ 2025-06-06 4:34 UTC (permalink / raw)
To: Namhyung Kim
Cc: peterz, mingo, acme, mark.rutland, alexander.shishkin,
linux-perf-users, linux-kernel-mentees, linux-kernel, skhan
On Fri, 6 Jun 2025 at 09:27, Namhyung Kim <namhyung@kernel.org> wrote:
>
> Hello,
>
> On Thu, Jun 05, 2025 at 11:30:11PM +0530, Suchit Karunakaran wrote:
> > The iostat_prefix() function previously included a TODO noting that its output
> > format was incorrect in JSON mode. This patch corrects that by conditionally
> > formatting the prefix string based on the output mode specified in
> > perf_stat_config.
>
> I've tested this. It doesn't work well.
>
> Before:
> # ./perf iostat -j -I 1000 true
> # time port 0.000517525 0000:00 "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> 0.000517525 0000:80
> 0.000517525 0000:17 , "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> 0.000517525 0000:85
> 0.000517525 0000:3a , "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> 0.000517525 0000:ae
> 0.000517525 0000:5d , "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> 0.000517525 0000:d7
>
>
> After:
> # ./perf iostat -j -I 1000 true
> # time port "interval" : 0.000463559, "device" : "0000:00""Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> "interval" : 0.000463559, "device" : "0000:80"
> "interval" : 0.000463559, "device" : "0000:17", "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> "interval" : 0.000463559, "device" : "0000:85"
> "interval" : 0.000463559, "device" : "0000:3a", "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> "interval" : 0.000463559, "device" : "0000:ae"
> "interval" : 0.000463559, "device" : "0000:5d", "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> "interval" : 0.000463559, "device" : "0000:d7"
>
> Thanks,
> Namhyung
>
> >
> > Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
> > ---
> > tools/perf/arch/x86/util/iostat.c | 35 ++++++++++++++++++++-----------
> > 1 file changed, 23 insertions(+), 12 deletions(-)
> >
> > diff --git a/tools/perf/arch/x86/util/iostat.c b/tools/perf/arch/x86/util/iostat.c
> > index 7442a2cd87ed..1d9c20dab5c7 100644
> > --- a/tools/perf/arch/x86/util/iostat.c
> > +++ b/tools/perf/arch/x86/util/iostat.c
> > @@ -403,18 +403,29 @@ void iostat_prefix(struct evlist *evlist,
> > struct iio_root_port *rp = evlist->selected->priv;
> >
> > if (rp) {
> > - /*
> > - * TODO: This is the incorrect format in JSON mode.
> > - * See prepare_timestamp()
> > - */
> > - if (ts)
> > - sprintf(prefix, "%6lu.%09lu%s%04x:%02x%s",
> > - ts->tv_sec, ts->tv_nsec,
> > - config->csv_sep, rp->domain, rp->bus,
> > - config->csv_sep);
> > - else
> > - sprintf(prefix, "%04x:%02x%s", rp->domain, rp->bus,
> > - config->csv_sep);
> > + if (ts) {
> > + if (config->json_output)
> > + sprintf(prefix,
> > + "\"interval\" : %lu.%09lu, \"device\" : \"%04x:%02x\"",
> > + (unsigned long)ts->tv_sec, ts->tv_nsec,
> > + rp->domain, rp->bus);
> > + else if (config->csv_output)
> > + sprintf(prefix, "%lu.%09lu%s%04x:%02x%s",
> > + (unsigned long)ts->tv_sec, ts->tv_nsec,
> > + config->csv_sep,
> > + rp->domain, rp->bus, config->csv_sep);
> > + else
> > + sprintf(prefix, "%6lu.%09lu %04x:%02x%s",
> > + (unsigned long)ts->tv_sec, ts->tv_nsec,
> > + rp->domain, rp->bus, config->csv_sep);
> > + } else {
> > + if (config->json_output)
> > + sprintf(prefix, "\"device\" : \"%04x:%02x\"",
> > + rp->domain, rp->bus);
> > + else
> > + sprintf(prefix, "%04x:%02x%s", rp->domain,
> > + rp->bus, config->csv_sep);
> > + }
> > }
> > }
> >
> > --
> > 2.49.0
> >
Hi Namhyung,
Thanks for testing it. Could you please tell what could be improved?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH RESEND] perf stat: Fix JSON output formatting in iostat_prefix()
2025-06-06 4:34 ` Suchit K
@ 2025-06-06 17:29 ` Namhyung Kim
0 siblings, 0 replies; 6+ messages in thread
From: Namhyung Kim @ 2025-06-06 17:29 UTC (permalink / raw)
To: Suchit K
Cc: peterz, mingo, acme, mark.rutland, alexander.shishkin,
linux-perf-users, linux-kernel-mentees, linux-kernel, skhan
On Fri, Jun 06, 2025 at 10:04:17AM +0530, Suchit K wrote:
> On Fri, 6 Jun 2025 at 09:27, Namhyung Kim <namhyung@kernel.org> wrote:
> >
> > Hello,
> >
> > On Thu, Jun 05, 2025 at 11:30:11PM +0530, Suchit Karunakaran wrote:
> > > The iostat_prefix() function previously included a TODO noting that its output
> > > format was incorrect in JSON mode. This patch corrects that by conditionally
> > > formatting the prefix string based on the output mode specified in
> > > perf_stat_config.
> >
> > I've tested this. It doesn't work well.
> >
> > Before:
> > # ./perf iostat -j -I 1000 true
> > # time port 0.000517525 0000:00 "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> > 0.000517525 0000:80
> > 0.000517525 0000:17 , "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> > 0.000517525 0000:85
> > 0.000517525 0000:3a , "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> > 0.000517525 0000:ae
> > 0.000517525 0000:5d , "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> > 0.000517525 0000:d7
> >
> >
> > After:
> > # ./perf iostat -j -I 1000 true
> > # time port "interval" : 0.000463559, "device" : "0000:00""Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> > "interval" : 0.000463559, "device" : "0000:80"
> > "interval" : 0.000463559, "device" : "0000:17", "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> > "interval" : 0.000463559, "device" : "0000:85"
> > "interval" : 0.000463559, "device" : "0000:3a", "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> > "interval" : 0.000463559, "device" : "0000:ae"
> > "interval" : 0.000463559, "device" : "0000:5d", "Inbound Read(MB)" : "0", "Inbound Write(MB)" : "0", "Outbound Read(MB)" : "0", "Outbound Write(MB)" : "0"
> > "interval" : 0.000463559, "device" : "0000:d7"
>
> Hi Namhyung,
> Thanks for testing it. Could you please tell what could be improved?
I think it should show a valid JSON. Something like this?
# ./perf iostat -j -I 1000 true
{"interval" : 0.000463559, "device" : "0000:00", "Inbound Read(MB)" : "0", ...}
{"interval" : 0.000463559, "device" : "0000:80", "Inbound Read(MB)" : "0", ...}
{"interval" : 0.000463559, "device" : "0000:17", "Inbound Read(MB)" : "0", ...}
{"interval" : 0.000463559, "device" : "0000:85", "Inbound Read(MB)" : "0", ...}
...
Thanks,
Namhyung
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2025-06-06 17:29 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-05 18:00 [PATCH RESEND] perf stat: Fix JSON output formatting in iostat_prefix() Suchit Karunakaran
2025-06-06 3:57 ` Namhyung Kim
2025-06-06 4:34 ` Suchit K
2025-06-06 17:29 ` Namhyung Kim
-- strict thread matches above, loose matches on Subject: below --
2025-05-20 9:45 Suchit Karunakaran
2025-05-28 18:07 ` Arnaldo Carvalho de Melo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.