[PATCH v3 1/5] scsi: fnic: Set appropriate logging level for log message

[PATCH v3 1/5] scsi: fnic: Set appropriate logging level for log message

[Karan Tilak Kumar]

Replace KERN_INFO with KERN_DEBUG for a log message.

Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
---
 drivers/scsi/fnic/fnic_scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 7133b254cbe4..75b29a018d1f 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -1046,7 +1046,7 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, unsigned int cq_ind
 		if (icmnd_cmpl->scsi_status == SAM_STAT_TASK_SET_FULL)
 			atomic64_inc(&fnic_stats->misc_stats.queue_fulls);
 
-		FNIC_SCSI_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->host, fnic->fnic_num,
 				"xfer_len: %llu", xfer_len);
 		break;
 
-- 
2.47.1

[PATCH v3 2/5] scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out

[Karan Tilak Kumar]

When both the RHBA and RPA FDMI requests time out, fnic reuses a frame
to send ABTS for each of them. On send completion, this causes an
attempt to free the same frame twice that leads to a crash.

Fix crash by allocating separate frames for RHBA and RPA,
and modify ABTS logic accordingly.

Tested by checking MDS for FDMI information.
Tested by using instrumented driver to:
Drop PLOGI response
Drop RHBA response
Drop RPA response
Drop RHBA and RPA response
Drop PLOGI response + ABTS response
Drop RHBA response + ABTS response
Drop RPA response + ABTS response
Drop RHBA and RPA response + ABTS response for both of them

Fixes: 09c1e6ab4ab2 ("scsi: fnic: Add and integrate support for FDMI")
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Tested-by: Arun Easi <aeasi@cisco.com>
Co-developed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Arun Easi <aeasi@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Cc: <stable@vger.kernel.org> # 6.14.x Please see patch description
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
---
 drivers/scsi/fnic/fdls_disc.c | 113 +++++++++++++++++++++++++---------
 drivers/scsi/fnic/fnic_fdls.h |   1 +
 2 files changed, 86 insertions(+), 28 deletions(-)

diff --git a/drivers/scsi/fnic/fdls_disc.c b/drivers/scsi/fnic/fdls_disc.c
index c2b6f4eb338e..0ee1b74967b9 100644
--- a/drivers/scsi/fnic/fdls_disc.c
+++ b/drivers/scsi/fnic/fdls_disc.c
@@ -763,47 +763,69 @@ static void fdls_send_fabric_abts(struct fnic_iport_s *iport)
 	iport->fabric.timer_pending = 1;
 }
 
-static void fdls_send_fdmi_abts(struct fnic_iport_s *iport)
+static uint8_t *fdls_alloc_init_fdmi_abts_frame(struct fnic_iport_s *iport,
+		uint16_t oxid)
 {
-	uint8_t *frame;
+	struct fc_frame_header *pfdmi_abts;
 	uint8_t d_id[3];
+	uint8_t *frame;
 	struct fnic *fnic = iport->fnic;
-	struct fc_frame_header *pfabric_abts;
-	unsigned long fdmi_tov;
-	uint16_t oxid;
-	uint16_t frame_size = FNIC_ETH_FCOE_HDRS_OFFSET +
-			sizeof(struct fc_frame_header);
 
 	frame = fdls_alloc_frame(iport);
 	if (frame == NULL) {
 		FNIC_FCS_DBG(KERN_ERR, fnic->host, fnic->fnic_num,
 				"Failed to allocate frame to send FDMI ABTS");
-		return;
+		return NULL;
 	}
 
-	pfabric_abts = (struct fc_frame_header *) (frame + FNIC_ETH_FCOE_HDRS_OFFSET);
+	pfdmi_abts = (struct fc_frame_header *) (frame + FNIC_ETH_FCOE_HDRS_OFFSET);
 	fdls_init_fabric_abts_frame(frame, iport);
 
 	hton24(d_id, FC_FID_MGMT_SERV);
-	FNIC_STD_SET_D_ID(*pfabric_abts, d_id);
+	FNIC_STD_SET_D_ID(*pfdmi_abts, d_id);
+	FNIC_STD_SET_OX_ID(*pfdmi_abts, oxid);
+
+	return frame;
+}
+
+static void fdls_send_fdmi_abts(struct fnic_iport_s *iport)
+{
+	uint8_t *frame;
+	unsigned long fdmi_tov;
+	uint16_t frame_size = FNIC_ETH_FCOE_HDRS_OFFSET +
+			sizeof(struct fc_frame_header);
 
 	if (iport->fabric.fdmi_pending & FDLS_FDMI_PLOGI_PENDING) {
-		oxid = iport->active_oxid_fdmi_plogi;
-		FNIC_STD_SET_OX_ID(*pfabric_abts, oxid);
+		frame = fdls_alloc_init_fdmi_abts_frame(iport,
+						iport->active_oxid_fdmi_plogi);
+		if (frame == NULL)
+			return;
+
 		fnic_send_fcoe_frame(iport, frame, frame_size);
 	} else {
 		if (iport->fabric.fdmi_pending & FDLS_FDMI_REG_HBA_PENDING) {
-			oxid = iport->active_oxid_fdmi_rhba;
-			FNIC_STD_SET_OX_ID(*pfabric_abts, oxid);
+			frame = fdls_alloc_init_fdmi_abts_frame(iport,
+						iport->active_oxid_fdmi_rhba);
+			if (frame == NULL)
+				return;
+
 			fnic_send_fcoe_frame(iport, frame, frame_size);
 		}
 		if (iport->fabric.fdmi_pending & FDLS_FDMI_RPA_PENDING) {
-			oxid = iport->active_oxid_fdmi_rpa;
-			FNIC_STD_SET_OX_ID(*pfabric_abts, oxid);
+			frame = fdls_alloc_init_fdmi_abts_frame(iport,
+						iport->active_oxid_fdmi_rpa);
+			if (frame == NULL) {
+				if (iport->fabric.fdmi_pending & FDLS_FDMI_REG_HBA_PENDING)
+					goto arm_timer;
+				else
+					return;
+			}
+
 			fnic_send_fcoe_frame(iport, frame, frame_size);
 		}
 	}
 
+arm_timer:
 	fdmi_tov = jiffies + msecs_to_jiffies(2 * iport->e_d_tov);
 	mod_timer(&iport->fabric.fdmi_timer, round_jiffies(fdmi_tov));
 	iport->fabric.fdmi_pending |= FDLS_FDMI_ABORT_PENDING;
@@ -2244,6 +2266,21 @@ void fdls_fabric_timer_callback(struct timer_list *t)
 	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
 }
 
+void fdls_fdmi_retry_plogi(struct fnic_iport_s *iport)
+{
+	struct fnic *fnic = iport->fnic;
+
+	iport->fabric.fdmi_pending = 0;
+	/* If max retries not exhausted, start over from fdmi plogi */
+	if (iport->fabric.fdmi_retry < FDLS_FDMI_MAX_RETRY) {
+		iport->fabric.fdmi_retry++;
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+					 "Retry FDMI PLOGI. FDMI retry: %d",
+					 iport->fabric.fdmi_retry);
+		fdls_send_fdmi_plogi(iport);
+	}
+}
+
 void fdls_fdmi_timer_callback(struct timer_list *t)
 {
 	struct fnic_fdls_fabric_s *fabric = from_timer(fabric, t, fdmi_timer);
@@ -2289,14 +2326,7 @@ void fdls_fdmi_timer_callback(struct timer_list *t)
 	FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
 		"fdmi timer callback : 0x%x\n", iport->fabric.fdmi_pending);
 
-	iport->fabric.fdmi_pending = 0;
-	/* If max retries not exhaused, start over from fdmi plogi */
-	if (iport->fabric.fdmi_retry < FDLS_FDMI_MAX_RETRY) {
-		iport->fabric.fdmi_retry++;
-		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
-					 "retry fdmi timer %d", iport->fabric.fdmi_retry);
-		fdls_send_fdmi_plogi(iport);
-	}
+	fdls_fdmi_retry_plogi(iport);
 	FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
 		"fdmi timer callback : 0x%x\n", iport->fabric.fdmi_pending);
 	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
@@ -3714,11 +3744,32 @@ static void fdls_process_fdmi_abts_rsp(struct fnic_iport_s *iport,
 	switch (FNIC_FRAME_TYPE(oxid)) {
 	case FNIC_FRAME_TYPE_FDMI_PLOGI:
 		fdls_free_oxid(iport, oxid, &iport->active_oxid_fdmi_plogi);
+
+		iport->fabric.fdmi_pending &= ~FDLS_FDMI_PLOGI_PENDING;
+		iport->fabric.fdmi_pending &= ~FDLS_FDMI_ABORT_PENDING;
 		break;
 	case FNIC_FRAME_TYPE_FDMI_RHBA:
+		iport->fabric.fdmi_pending &= ~FDLS_FDMI_REG_HBA_PENDING;
+
+		/* If RPA is still pending, don't turn off ABORT PENDING.
+		 * We count on the timer to detect the ABTS timeout and take
+		 * corrective action.
+		 */
+		if (!(iport->fabric.fdmi_pending & FDLS_FDMI_RPA_PENDING))
+			iport->fabric.fdmi_pending &= ~FDLS_FDMI_ABORT_PENDING;
+
 		fdls_free_oxid(iport, oxid, &iport->active_oxid_fdmi_rhba);
 		break;
 	case FNIC_FRAME_TYPE_FDMI_RPA:
+		iport->fabric.fdmi_pending &= ~FDLS_FDMI_RPA_PENDING;
+
+		/* If RHBA is still pending, don't turn off ABORT PENDING.
+		 * We count on the timer to detect the ABTS timeout and take
+		 * corrective action.
+		 */
+		if (!(iport->fabric.fdmi_pending & FDLS_FDMI_REG_HBA_PENDING))
+			iport->fabric.fdmi_pending &= ~FDLS_FDMI_ABORT_PENDING;
+
 		fdls_free_oxid(iport, oxid, &iport->active_oxid_fdmi_rpa);
 		break;
 	default:
@@ -3728,10 +3779,16 @@ static void fdls_process_fdmi_abts_rsp(struct fnic_iport_s *iport,
 		break;
 	}
 
-	timer_delete_sync(&iport->fabric.fdmi_timer);
-	iport->fabric.fdmi_pending &= ~FDLS_FDMI_ABORT_PENDING;
-
-	fdls_send_fdmi_plogi(iport);
+	/*
+	 * Only if ABORT PENDING is off, delete the timer, and if no other
+	 * operations are pending, retry FDMI.
+	 * Otherwise, let the timer pop and take the appropriate action.
+	 */
+	if (!(iport->fabric.fdmi_pending & FDLS_FDMI_ABORT_PENDING)) {
+		timer_delete_sync(&iport->fabric.fdmi_timer);
+		if (!iport->fabric.fdmi_pending)
+			fdls_fdmi_retry_plogi(iport);
+	}
 }
 
 static void
diff --git a/drivers/scsi/fnic/fnic_fdls.h b/drivers/scsi/fnic/fnic_fdls.h
index 8e610b65ad57..531d0b37e450 100644
--- a/drivers/scsi/fnic/fnic_fdls.h
+++ b/drivers/scsi/fnic/fnic_fdls.h
@@ -394,6 +394,7 @@ void fdls_send_tport_abts(struct fnic_iport_s *iport,
 bool fdls_delete_tport(struct fnic_iport_s *iport,
 		       struct fnic_tport_s *tport);
 void fdls_fdmi_timer_callback(struct timer_list *t);
+void fdls_fdmi_retry_plogi(struct fnic_iport_s *iport);
 
 /* fnic_fcs.c */
 void fnic_fdls_init(struct fnic *fnic, int usefip);
-- 
2.47.1

Re: [PATCH v3 2/5] scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out

[Dan Carpenter]

On Wed, Jun 11, 2025 at 05:44:23PM -0700, Karan Tilak Kumar wrote:
> When both the RHBA and RPA FDMI requests time out, fnic reuses a frame
> to send ABTS for each of them. On send completion, this causes an
> attempt to free the same frame twice that leads to a crash.
> 
> Fix crash by allocating separate frames for RHBA and RPA,
> and modify ABTS logic accordingly.
> 
> Tested by checking MDS for FDMI information.
> Tested by using instrumented driver to:
> Drop PLOGI response
> Drop RHBA response
> Drop RPA response
> Drop RHBA and RPA response
> Drop PLOGI response + ABTS response
> Drop RHBA response + ABTS response
> Drop RPA response + ABTS response
> Drop RHBA and RPA response + ABTS response for both of them
> 
> Fixes: 09c1e6ab4ab2 ("scsi: fnic: Add and integrate support for FDMI")
> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
> Tested-by: Arun Easi <aeasi@cisco.com>
> Co-developed-by: Arun Easi <aeasi@cisco.com>
> Signed-off-by: Arun Easi <aeasi@cisco.com>
> Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
> Cc: <stable@vger.kernel.org> # 6.14.x Please see patch description

I'm a bit confused.  Why do we need to specify 6.14.x?  I would have
assumed that the Fixes tag was enough information.  What are we supposed
to see in the patch description?

I suspect you're making this too complicated...  Just put
Cc: <stable@vger.kernel.org> and a Fixes tag and let the scripts figure
it out.  Or put in the commit description, "The Fixes tag points to
an older kernel because XXX but really this should only be backported
to 6.14.x because YYY."

regards,
dan carpenter

Re: [PATCH v3 2/5] scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out

[Dan Carpenter]

On Thu, Jun 12, 2025 at 10:42:30AM +0300, Dan Carpenter wrote:
> On Wed, Jun 11, 2025 at 05:44:23PM -0700, Karan Tilak Kumar wrote:
> > When both the RHBA and RPA FDMI requests time out, fnic reuses a frame
> > to send ABTS for each of them. On send completion, this causes an
> > attempt to free the same frame twice that leads to a crash.
> > 
> > Fix crash by allocating separate frames for RHBA and RPA,
> > and modify ABTS logic accordingly.
> > 
> > Tested by checking MDS for FDMI information.
> > Tested by using instrumented driver to:
> > Drop PLOGI response
> > Drop RHBA response
> > Drop RPA response
> > Drop RHBA and RPA response
> > Drop PLOGI response + ABTS response
> > Drop RHBA response + ABTS response
> > Drop RPA response + ABTS response
> > Drop RHBA and RPA response + ABTS response for both of them
> > 
> > Fixes: 09c1e6ab4ab2 ("scsi: fnic: Add and integrate support for FDMI")
> > Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
> > Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
> > Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
> > Tested-by: Arun Easi <aeasi@cisco.com>
> > Co-developed-by: Arun Easi <aeasi@cisco.com>
> > Signed-off-by: Arun Easi <aeasi@cisco.com>
> > Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
> > Cc: <stable@vger.kernel.org> # 6.14.x Please see patch description
> 
> I'm a bit confused.  Why do we need to specify 6.14.x?  I would have
> assumed that the Fixes tag was enough information.  What are we supposed
> to see in the patch description?
> 
> I suspect you're making this too complicated...  Just put
> Cc: <stable@vger.kernel.org> and a Fixes tag and let the scripts figure
> it out.  Or put in the commit description, "The Fixes tag points to
> an older kernel because XXX but really this should only be backported
> to 6.14.x because YYY."

But here even with the comment in the commit description, you would still
just say:

Cc: <stable@vger.kernel.org> # 6.14.x

The stable maintainers trust you to list the correct kernel and don't
need to know the reasoning.

I much prefer to keep it simple whenever possible.  We had bad CVE where
someone left off the Fixes tag and instead specified
"Cc: <stable@vger.kernel.org> # 4.1" where 4.1 was the oldest supported
kernel on kernel.org.  The patch should have been applied to the older
vendor kernels but it wasn't because the the tag was wrong.

regards,
dan carpenter

RE: [PATCH v3 2/5] scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out

[Karan Tilak Kumar (kartilak)]

On Thursday, June 12, 2025 1:39 AM, Dan Carpenter <dan.carpenter@linaro.org> wrote:
>
> On Thu, Jun 12, 2025 at 10:42:30AM +0300, Dan Carpenter wrote:
> > On Wed, Jun 11, 2025 at 05:44:23PM -0700, Karan Tilak Kumar wrote:
> > > When both the RHBA and RPA FDMI requests time out, fnic reuses a frame
> > > to send ABTS for each of them. On send completion, this causes an
> > > attempt to free the same frame twice that leads to a crash.
> > >
> > > Fix crash by allocating separate frames for RHBA and RPA,
> > > and modify ABTS logic accordingly.
> > >
> > > Tested by checking MDS for FDMI information.
> > > Tested by using instrumented driver to:
> > > Drop PLOGI response
> > > Drop RHBA response
> > > Drop RPA response
> > > Drop RHBA and RPA response
> > > Drop PLOGI response + ABTS response
> > > Drop RHBA response + ABTS response
> > > Drop RPA response + ABTS response
> > > Drop RHBA and RPA response + ABTS response for both of them
> > >
> > > Fixes: 09c1e6ab4ab2 ("scsi: fnic: Add and integrate support for FDMI")
> > > Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
> > > Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
> > > Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
> > > Tested-by: Arun Easi <aeasi@cisco.com>
> > > Co-developed-by: Arun Easi <aeasi@cisco.com>
> > > Signed-off-by: Arun Easi <aeasi@cisco.com>
> > > Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
> > > Cc: <stable@vger.kernel.org> # 6.14.x Please see patch description
> >
> > I'm a bit confused.  Why do we need to specify 6.14.x?  I would have
> > assumed that the Fixes tag was enough information.  What are we supposed
> > to see in the patch description?
> >
> > I suspect you're making this too complicated...  Just put
> > Cc: <stable@vger.kernel.org> and a Fixes tag and let the scripts figure
> > it out.  Or put in the commit description, "The Fixes tag points to
> > an older kernel because XXX but really this should only be backported
> > to 6.14.x because YYY."
>
> But here even with the comment in the commit description, you would still
> just say:
>
> Cc: <stable@vger.kernel.org> # 6.14.x
>
> The stable maintainers trust you to list the correct kernel and don't
> need to know the reasoning.

Thanks for clarifying this Dan. 

> I much prefer to keep it simple whenever possible.  We had bad CVE where
> someone left off the Fixes tag and instead specified
> "Cc: <stable@vger.kernel.org> # 4.1" where 4.1 was the oldest supported
> kernel on kernel.org.  The patch should have been applied to the older
> vendor kernels but it wasn't because the the tag was wrong.
>

I understand and agree with you. I prefer to keep it simple as well.
In V4, as you suggested, I'll keep the fixes tag and the Cc: tag and
remove the comments section.

> regards,
> dan carpenter
>
>

Thanks for your review comments.

Regards,
Karan

[PATCH v3 3/5] scsi: fnic: Add and improve logs in FDMI and FDMI ABTS paths

[Karan Tilak Kumar]

Add logs in FDMI and FDMI ABTS paths.
Modify log text in these paths.

Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
---
 drivers/scsi/fnic/fdls_disc.c | 65 +++++++++++++++++++++++++++++++----
 1 file changed, 58 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/fnic/fdls_disc.c b/drivers/scsi/fnic/fdls_disc.c
index 0ee1b74967b9..9e9939d41fa8 100644
--- a/drivers/scsi/fnic/fdls_disc.c
+++ b/drivers/scsi/fnic/fdls_disc.c
@@ -791,6 +791,7 @@ static uint8_t *fdls_alloc_init_fdmi_abts_frame(struct fnic_iport_s *iport,
 static void fdls_send_fdmi_abts(struct fnic_iport_s *iport)
 {
 	uint8_t *frame;
+	struct fnic *fnic = iport->fnic;
 	unsigned long fdmi_tov;
 	uint16_t frame_size = FNIC_ETH_FCOE_HDRS_OFFSET +
 			sizeof(struct fc_frame_header);
@@ -801,6 +802,9 @@ static void fdls_send_fdmi_abts(struct fnic_iport_s *iport)
 		if (frame == NULL)
 			return;
 
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			 "0x%x: FDLS send FDMI PLOGI abts. iport->fabric.state: %d oxid: 0x%x",
+			 iport->fcid, iport->fabric.state, iport->active_oxid_fdmi_plogi);
 		fnic_send_fcoe_frame(iport, frame, frame_size);
 	} else {
 		if (iport->fabric.fdmi_pending & FDLS_FDMI_REG_HBA_PENDING) {
@@ -809,6 +813,9 @@ static void fdls_send_fdmi_abts(struct fnic_iport_s *iport)
 			if (frame == NULL)
 				return;
 
+			FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+				 "0x%x: FDLS send FDMI RHBA abts. iport->fabric.state: %d oxid: 0x%x",
+				 iport->fcid, iport->fabric.state, iport->active_oxid_fdmi_rhba);
 			fnic_send_fcoe_frame(iport, frame, frame_size);
 		}
 		if (iport->fabric.fdmi_pending & FDLS_FDMI_RPA_PENDING) {
@@ -821,6 +828,9 @@ static void fdls_send_fdmi_abts(struct fnic_iport_s *iport)
 					return;
 			}
 
+			FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+				 "0x%x: FDLS send FDMI RPA abts. iport->fabric.state: %d oxid: 0x%x",
+				 iport->fcid, iport->fabric.state, iport->active_oxid_fdmi_rpa);
 			fnic_send_fcoe_frame(iport, frame, frame_size);
 		}
 	}
@@ -829,6 +839,10 @@ static void fdls_send_fdmi_abts(struct fnic_iport_s *iport)
 	fdmi_tov = jiffies + msecs_to_jiffies(2 * iport->e_d_tov);
 	mod_timer(&iport->fabric.fdmi_timer, round_jiffies(fdmi_tov));
 	iport->fabric.fdmi_pending |= FDLS_FDMI_ABORT_PENDING;
+
+	FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+		 "0x%x: iport->fabric.fdmi_pending: 0x%x",
+		 iport->fcid, iport->fabric.fdmi_pending);
 }
 
 static void fdls_send_fabric_flogi(struct fnic_iport_s *iport)
@@ -2292,7 +2306,7 @@ void fdls_fdmi_timer_callback(struct timer_list *t)
 	spin_lock_irqsave(&fnic->fnic_lock, flags);
 
 	FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
-		"fdmi timer callback : 0x%x\n", iport->fabric.fdmi_pending);
+		"iport->fabric.fdmi_pending: 0x%x\n", iport->fabric.fdmi_pending);
 
 	if (!iport->fabric.fdmi_pending) {
 		/* timer expired after fdmi responses received. */
@@ -2300,7 +2314,7 @@ void fdls_fdmi_timer_callback(struct timer_list *t)
 		return;
 	}
 	FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
-		"fdmi timer callback : 0x%x\n", iport->fabric.fdmi_pending);
+		"iport->fabric.fdmi_pending: 0x%x\n", iport->fabric.fdmi_pending);
 
 	/* if not abort pending, send an abort */
 	if (!(iport->fabric.fdmi_pending & FDLS_FDMI_ABORT_PENDING)) {
@@ -2309,26 +2323,37 @@ void fdls_fdmi_timer_callback(struct timer_list *t)
 		return;
 	}
 	FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
-		"fdmi timer callback : 0x%x\n", iport->fabric.fdmi_pending);
+		"iport->fabric.fdmi_pending: 0x%x\n", iport->fabric.fdmi_pending);
 
 	/* ABTS pending for an active fdmi request that is pending.
 	 * That means FDMI ABTS timed out
 	 * Schedule to free the OXID after 2*r_a_tov and proceed
 	 */
 	if (iport->fabric.fdmi_pending & FDLS_FDMI_PLOGI_PENDING) {
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			"FDMI PLOGI ABTS timed out. Schedule oxid free: 0x%x\n",
+			iport->active_oxid_fdmi_plogi);
 		fdls_schedule_oxid_free(iport, &iport->active_oxid_fdmi_plogi);
 	} else {
-		if (iport->fabric.fdmi_pending & FDLS_FDMI_REG_HBA_PENDING)
+		if (iport->fabric.fdmi_pending & FDLS_FDMI_REG_HBA_PENDING) {
+			FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+						"FDMI RHBA ABTS timed out. Schedule oxid free: 0x%x\n",
+						iport->active_oxid_fdmi_rhba);
 			fdls_schedule_oxid_free(iport, &iport->active_oxid_fdmi_rhba);
-		if (iport->fabric.fdmi_pending & FDLS_FDMI_RPA_PENDING)
+		}
+		if (iport->fabric.fdmi_pending & FDLS_FDMI_RPA_PENDING) {
+			FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+						"FDMI RPA ABTS timed out. Schedule oxid free: 0x%x\n",
+						iport->active_oxid_fdmi_rpa);
 			fdls_schedule_oxid_free(iport, &iport->active_oxid_fdmi_rpa);
+		}
 	}
 	FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
-		"fdmi timer callback : 0x%x\n", iport->fabric.fdmi_pending);
+		"iport->fabric.fdmi_pending: 0x%x\n", iport->fabric.fdmi_pending);
 
 	fdls_fdmi_retry_plogi(iport);
 	FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
-		"fdmi timer callback : 0x%x\n", iport->fabric.fdmi_pending);
+		"iport->fabric.fdmi_pending: 0x%x\n", iport->fabric.fdmi_pending);
 	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
 }
 
@@ -3743,12 +3768,26 @@ static void fdls_process_fdmi_abts_rsp(struct fnic_iport_s *iport,
 
 	switch (FNIC_FRAME_TYPE(oxid)) {
 	case FNIC_FRAME_TYPE_FDMI_PLOGI:
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			"Received FDMI PLOGI ABTS rsp with oxid: 0x%x", oxid);
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			 "0x%x: iport->fabric.fdmi_pending: 0x%x",
+			 iport->fcid, iport->fabric.fdmi_pending);
 		fdls_free_oxid(iport, oxid, &iport->active_oxid_fdmi_plogi);
 
 		iport->fabric.fdmi_pending &= ~FDLS_FDMI_PLOGI_PENDING;
 		iport->fabric.fdmi_pending &= ~FDLS_FDMI_ABORT_PENDING;
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			 "0x%x: iport->fabric.fdmi_pending: 0x%x",
+			 iport->fcid, iport->fabric.fdmi_pending);
 		break;
 	case FNIC_FRAME_TYPE_FDMI_RHBA:
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			"Received FDMI RHBA ABTS rsp with oxid: 0x%x", oxid);
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			 "0x%x: iport->fabric.fdmi_pending: 0x%x",
+			 iport->fcid, iport->fabric.fdmi_pending);
+
 		iport->fabric.fdmi_pending &= ~FDLS_FDMI_REG_HBA_PENDING;
 
 		/* If RPA is still pending, don't turn off ABORT PENDING.
@@ -3759,8 +3798,17 @@ static void fdls_process_fdmi_abts_rsp(struct fnic_iport_s *iport,
 			iport->fabric.fdmi_pending &= ~FDLS_FDMI_ABORT_PENDING;
 
 		fdls_free_oxid(iport, oxid, &iport->active_oxid_fdmi_rhba);
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			 "0x%x: iport->fabric.fdmi_pending: 0x%x",
+			 iport->fcid, iport->fabric.fdmi_pending);
 		break;
 	case FNIC_FRAME_TYPE_FDMI_RPA:
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			"Received FDMI RPA ABTS rsp with oxid: 0x%x", oxid);
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			 "0x%x: iport->fabric.fdmi_pending: 0x%x",
+			 iport->fcid, iport->fabric.fdmi_pending);
+
 		iport->fabric.fdmi_pending &= ~FDLS_FDMI_RPA_PENDING;
 
 		/* If RHBA is still pending, don't turn off ABORT PENDING.
@@ -3771,6 +3819,9 @@ static void fdls_process_fdmi_abts_rsp(struct fnic_iport_s *iport,
 			iport->fabric.fdmi_pending &= ~FDLS_FDMI_ABORT_PENDING;
 
 		fdls_free_oxid(iport, oxid, &iport->active_oxid_fdmi_rpa);
+		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
+			 "0x%x: iport->fabric.fdmi_pending: 0x%x",
+			 iport->fcid, iport->fabric.fdmi_pending);
 		break;
 	default:
 		FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
-- 
2.47.1

[PATCH v3 4/5] scsi: fnic: Turn off FDMI ACTIVE flags on link down

[Karan Tilak Kumar]

When the link goes down and comes up, FDMI requests are not sent out
anymore.
Fix bug by turning off FNIC_FDMI_ACTIVE when the link goes down.

Fixes: 09c1e6ab4ab2 ("scsi: fnic: Add and integrate support for FDMI")
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Cc: <stable@vger.kernel.org> # 6.14.x Please see patch description
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
---
 drivers/scsi/fnic/fdls_disc.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/fnic/fdls_disc.c b/drivers/scsi/fnic/fdls_disc.c
index 9e9939d41fa8..14691db4d5f9 100644
--- a/drivers/scsi/fnic/fdls_disc.c
+++ b/drivers/scsi/fnic/fdls_disc.c
@@ -5078,9 +5078,12 @@ void fnic_fdls_link_down(struct fnic_iport_s *iport)
 		fdls_delete_tport(iport, tport);
 	}
 
-	if ((fnic_fdmi_support == 1) && (iport->fabric.fdmi_pending > 0)) {
-		timer_delete_sync(&iport->fabric.fdmi_timer);
-		iport->fabric.fdmi_pending = 0;
+	if (fnic_fdmi_support == 1) {
+		if (iport->fabric.fdmi_pending > 0) {
+			timer_delete_sync(&iport->fabric.fdmi_timer);
+			iport->fabric.fdmi_pending = 0;
+		}
+		iport->flags &= ~FNIC_FDMI_ACTIVE;
 	}
 
 	FNIC_FCS_DBG(KERN_INFO, fnic->host, fnic->fnic_num,
-- 
2.47.1

[PATCH v3 5/5] scsi: fnic: Increment driver version number

[Karan Tilak Kumar]

Increment driver version number.

Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
---
 drivers/scsi/fnic/fnic.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index 6c5f6046b1f5..86e293ce530d 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -30,7 +30,7 @@
 
 #define DRV_NAME		"fnic"
 #define DRV_DESCRIPTION		"Cisco FCoE HBA Driver"
-#define DRV_VERSION		"1.8.0.0"
+#define DRV_VERSION		"1.8.0.1"
 #define PFX			DRV_NAME ": "
 #define DFX                     DRV_NAME "%d: "
 
-- 
2.47.1