[GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[Florian Fainelli]

The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:

  Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)

are available in the Git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/defconfig-arm64

for you to fetch changes up to 44bba869d25985eb2212beaa4e353f6aa476dbf0:

  arm64: defconfig: Enable OF_OVERLAY option (2025-06-09 10:10:06 -0700)

----------------------------------------------------------------
This pull request contains ARM64 defconfig updates for 6.17, please pull
the following:

- Andrea updates the defconfig to enable the RP1 misc, clock and gpio
  drivers as as well as turn on CONFIG_OF_OVERLAY which is necessary to
  apply the RP1 overlay file

----------------------------------------------------------------
Andrea della Porta (2):
      arm64: defconfig: Enable RP1 misc/clock/gpio drivers
      arm64: defconfig: Enable OF_OVERLAY option

 arch/arm64/configs/defconfig | 4 ++++
 1 file changed, 4 insertions(+)

[GIT PULL 2/5] Broadcom devicetree changes for 6.17

[Florian Fainelli]

The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:

  Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)

are available in the Git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/devicetree

for you to fetch changes up to 8df00d6bdb0ab976637ba15829be5771dad2073f:

  ARM: dts: bcm958625-meraki-mx6x: Use #pwm-cells = <3> (2025-06-09 10:10:41 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 6.17, please pull the following:

- Linus makes a number of updates to the BCMBCA SoCs Device Tree files
  to correct UART interrupt numbers, add interrupts to the RNG block,
  and leverage the fact that all SoCs have the same peripherals at the
  same aperture

- Uwe corrects the Merakia MX6X DTS file to have #pwm-cells = 3 as per
  the binding

----------------------------------------------------------------
Linus Walleij (8):
      ARM: dts: bcm6878: Correct UART0 IRQ number
      dt-bindings: rng: r200: Add interrupt property
      ARM: dts: bcm6846: Add interrupt to RNG
      ARM: dts: bcm6855: Add BCMBCA peripherals
      ARM: dts: bcm6878: Add BCMBCA peripherals
      ARM: dts: bcm63138: Add BCMBCA peripherals
      ARM: dts: bcm63148: Add BCMBCA peripherals
      ARM: dts: bcm63178: Add BCMBCA peripherals

Uwe Kleine-König (1):
      ARM: dts: bcm958625-meraki-mx6x: Use #pwm-cells = <3>

 .../devicetree/bindings/rng/brcm,iproc-rng200.yaml |   6 +
 arch/arm/boot/dts/broadcom/bcm63138.dtsi           |  79 ++++++++++++-
 arch/arm/boot/dts/broadcom/bcm63148.dtsi           |  64 +++++++++++
 arch/arm/boot/dts/broadcom/bcm63178.dtsi           | 112 ++++++++++++++++++
 arch/arm/boot/dts/broadcom/bcm6846.dtsi            |   1 +
 arch/arm/boot/dts/broadcom/bcm6855.dtsi            | 127 +++++++++++++++++++++
 arch/arm/boot/dts/broadcom/bcm6878.dtsi            | 120 ++++++++++++++++++-
 .../dts/broadcom/bcm958625-meraki-mx6x-common.dtsi |   7 +-
 8 files changed, 510 insertions(+), 6 deletions(-)

[GIT PULL 3/5] Broadcom devicetree-arm64 changes for 6.17

[Florian Fainelli]

The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:

  Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)

are available in the Git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/devicetree-arm64

for you to fetch changes up to 657e413c277898f0ff91922475c67d82faaeeef7:

  arm64: dts: broadcom: northstar2: Drop GIC V2M "interrupt-parent" (2025-06-10 10:49:57 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.17, please pull the following:

- Linus updates the 64-bit BCMBCA SoCs Device Tree with the common
  peripherals that exit as well as correct IRQ assignments

- Andrea adds support for the RP1 companion chip on the Raspberry Pi 5
  systems with clocks, gpios, pinctrl, all of that using an overlay to
  describe those peripherals

- Rob drops the interrupt-parent property from the GICv2M node on
  Northstar2 SoCs

----------------------------------------------------------------
Andrea della Porta (7):
      dt-bindings: clock: Add RaspberryPi RP1 clock bindings
      dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
      dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
      arm64: dts: rp1: Add support for RaspberryPi's RP1 device
      arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
      arm64: dts: broadcom: Add board DTS for Rpi5 which includes RP1 node
      arm64: dts: broadcom: Add overlay for RP1 device

Linus Walleij (4):
      ARM64: dts: bcm4908: Add BCMBCA peripherals
      ARM64: dts: bcm6856: Add BCMBCA peripherals
      ARM64: dts: bcm6858: Add BCMBCA peripherals
      ARM64: dts: bcm63158: Add BCMBCA peripherals

Rob Herring (Arm) (1):
      arm64: dts: broadcom: northstar2: Drop GIC V2M "interrupt-parent"

 .../bindings/clock/raspberrypi,rp1-clocks.yaml     |  58 ++++++
 .../devicetree/bindings/misc/pci1de4,1.yaml        | 137 ++++++++++++++
 .../bindings/pinctrl/raspberrypi,rp1-gpio.yaml     | 198 +++++++++++++++++++++
 arch/arm64/boot/dts/broadcom/Makefile              |   4 +-
 .../boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts  | 121 +++++++++++++
 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts   | 111 ++----------
 arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi   | 116 +++++++++++-
 arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi  | 129 ++++++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi   | 130 +++++++++++++-
 arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi   | 119 ++++++++++++-
 arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi   |   8 -
 arch/arm64/boot/dts/broadcom/rp1-common.dtsi       |  42 +++++
 arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi        |  14 ++
 arch/arm64/boot/dts/broadcom/rp1.dtso              |  11 ++
 include/dt-bindings/clock/raspberrypi,rp1-clocks.h |  61 +++++++
 15 files changed, 1145 insertions(+), 114 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
 create mode 100644 Documentation/devicetree/bindings/misc/pci1de4,1.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/rp1-common.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso
 create mode 100644 include/dt-bindings/clock/raspberrypi,rp1-clocks.h

[GIT PULL 4/5] Broadcom drivers changes for 6.17

[Florian Fainelli]

The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:

  Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)

are available in the Git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/drivers

for you to fetch changes up to e3ce7b897388339b407d57969acaa26063e38209:

  pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support (2025-06-25 12:08:56 -0700)

----------------------------------------------------------------
This pull request contains Broadcom SoCs drivers updates for 6.17,
please pull the following:

- Andrea adds the RP1 clock, pinctrl/pinconf/gpio and misc driver to
  bind them all

----------------------------------------------------------------
Andrea della Porta (5):
      dt-bindings: clock: Add RaspberryPi RP1 clock bindings
      clk: rp1: Add support for clocks provided by RP1
      pinctrl: rp1: Implement RaspberryPi RP1 gpio support
      misc: rp1: RaspberryPi RP1 misc driver
      pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support

 .../bindings/clock/raspberrypi,rp1-clocks.yaml     |   58 +
 drivers/clk/Kconfig                                |    9 +
 drivers/clk/Makefile                               |    1 +
 drivers/clk/clk-rp1.c                              | 1494 ++++++++++++++++
 drivers/misc/Kconfig                               |    1 +
 drivers/misc/Makefile                              |    1 +
 drivers/misc/rp1/Kconfig                           |   20 +
 drivers/misc/rp1/Makefile                          |    3 +
 drivers/misc/rp1/rp1-pci.dtso                      |   25 +
 drivers/misc/rp1/rp1_pci.c                         |  333 ++++
 drivers/pci/quirks.c                               |    1 +
 drivers/pinctrl/Kconfig                            |   11 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-rp1.c                      | 1829 ++++++++++++++++++++
 include/dt-bindings/clock/raspberrypi,rp1-clocks.h |   61 +
 include/linux/pci_ids.h                            |    3 +
 16 files changed, 3851 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
 create mode 100644 drivers/clk/clk-rp1.c
 create mode 100644 drivers/misc/rp1/Kconfig
 create mode 100644 drivers/misc/rp1/Makefile
 create mode 100644 drivers/misc/rp1/rp1-pci.dtso
 create mode 100644 drivers/misc/rp1/rp1_pci.c
 create mode 100644 drivers/pinctrl/pinctrl-rp1.c
 create mode 100644 include/dt-bindings/clock/raspberrypi,rp1-clocks.h

Re: [GIT PULL 4/5] Broadcom drivers changes for 6.17

[Greg Kroah-Hartman]

On Mon, Jun 30, 2025 at 12:02:15PM -0700, Florian Fainelli wrote:
> The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
> 
>   Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
> 
> are available in the Git repository at:
> 
>   https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/drivers
> 
> for you to fetch changes up to e3ce7b897388339b407d57969acaa26063e38209:
> 
>   pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support (2025-06-25 12:08:56 -0700)
> 
> ----------------------------------------------------------------
> This pull request contains Broadcom SoCs drivers updates for 6.17,
> please pull the following:
> 
> - Andrea adds the RP1 clock, pinctrl/pinconf/gpio and misc driver to
>   bind them all
> 
> ----------------------------------------------------------------
> Andrea della Porta (5):
>       dt-bindings: clock: Add RaspberryPi RP1 clock bindings
>       clk: rp1: Add support for clocks provided by RP1
>       pinctrl: rp1: Implement RaspberryPi RP1 gpio support
>       misc: rp1: RaspberryPi RP1 misc driver
>       pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support
> 
>  .../bindings/clock/raspberrypi,rp1-clocks.yaml     |   58 +
>  drivers/clk/Kconfig                                |    9 +
>  drivers/clk/Makefile                               |    1 +
>  drivers/clk/clk-rp1.c                              | 1494 ++++++++++++++++
>  drivers/misc/Kconfig                               |    1 +
>  drivers/misc/Makefile                              |    1 +
>  drivers/misc/rp1/Kconfig                           |   20 +
>  drivers/misc/rp1/Makefile                          |    3 +
>  drivers/misc/rp1/rp1-pci.dtso                      |   25 +
>  drivers/misc/rp1/rp1_pci.c                         |  333 ++++

Any chance to actually review this code before you throw it under a
different maintainer's responsibility?

And what's wrong with patches, why a pull request here?

thanks,

greg k-h

Re: [GIT PULL 4/5] Broadcom drivers changes for 6.17

[Andrea della Porta]

Hi Greg,

On 07:11 Tue 01 Jul     , Greg Kroah-Hartman wrote:
> On Mon, Jun 30, 2025 at 12:02:15PM -0700, Florian Fainelli wrote:
> > The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
> > 
> >   Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
> > 
> > are available in the Git repository at:
> > 
> >   https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/drivers
> > 
> > for you to fetch changes up to e3ce7b897388339b407d57969acaa26063e38209:
> > 
> >   pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support (2025-06-25 12:08:56 -0700)
> > 
> > ----------------------------------------------------------------
> > This pull request contains Broadcom SoCs drivers updates for 6.17,
> > please pull the following:
> > 
> > - Andrea adds the RP1 clock, pinctrl/pinconf/gpio and misc driver to
> >   bind them all
> > 
> > ----------------------------------------------------------------
> > Andrea della Porta (5):
> >       dt-bindings: clock: Add RaspberryPi RP1 clock bindings
> >       clk: rp1: Add support for clocks provided by RP1
> >       pinctrl: rp1: Implement RaspberryPi RP1 gpio support
> >       misc: rp1: RaspberryPi RP1 misc driver
> >       pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support
> > 
> >  .../bindings/clock/raspberrypi,rp1-clocks.yaml     |   58 +
> >  drivers/clk/Kconfig                                |    9 +
> >  drivers/clk/Makefile                               |    1 +
> >  drivers/clk/clk-rp1.c                              | 1494 ++++++++++++++++
> >  drivers/misc/Kconfig                               |    1 +
> >  drivers/misc/Makefile                              |    1 +
> >  drivers/misc/rp1/Kconfig                           |   20 +
> >  drivers/misc/rp1/Makefile                          |    3 +
> >  drivers/misc/rp1/rp1-pci.dtso                      |   25 +
> >  drivers/misc/rp1/rp1_pci.c                         |  333 ++++
> 
> Any chance to actually review this code before you throw it under a
> different maintainer's responsibility?
> 
> And what's wrong with patches, why a pull request here?

Since the patchset is spanning several subsystems and some file
dependencies were shared between maintainers, Florian was so kind
to funnell all patches through the Broadcom tree, as the following
mail explains:

https://lore.kernel.org/all/0e154ae3-e0ab-4a4e-aa39-999ea1c720ed@broadcom.com/

Let me summarize the patch history here below:

dt-bindings: clock: Add RaspberryPi RP1 clock bindings - 
	Reviewed-by: Krzysztof and Florian [1,2]

clk: rp1: Add support for clocks provided by RP1 - 
	Stephen: [3]

pinctrl: rp1: Implement RaspberryPi RP1 gpio support - 
	Reviewed-by: Linus W. and Stefan W. [4,5]

misc: rp1: RaspberryPi RP1 misc driver -
	Acked-by: Bjorn H. and Greg [6,7]

pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support -
	Acked-by: Linus W. [8]

Regarding the testing phase, I and some colleagues at SUSE have tested
the patchset from quite some time now.

Links:
[1] - https://lore.kernel.org/all/leeeqocyjme2sbjbwsw6whisyu6aeq7vfypdi4arktpowzxvek@ejjyxx4iliap/
[2] - https://lore.kernel.org/all/a70e8c45-97a8-4fb6-9b27-4f9ed020211c@broadcom.com/
[3] - https://lore.kernel.org/all/8513c30f597f757a199e4f9a565b0bf5@kernel.org/
[4] - https://lore.kernel.org/all/CACRpkdZCbvNY=B05e9wGqNr5b4t8GrDVsr01C3xd5E-WWwPyMQ@mail.gmail.com/
[5] - https://lore.kernel.org/all/0c6fa2cc-3a7e-4db2-bbad-7c19a876937e@gmx.net/
[6] - https://lore.kernel.org/all/20250416193152.GA78446@bhelgaas/
[7] - https://lore.kernel.org/all/2025042551-agency-boozy-dc3b@gregkh/
[8] - https://lore.kernel.org/all/CACRpkdbAxyZK_f8y6mzX_eJ3UM5ZtuXEpSmXE+QpUXaHKw_NGg@mail.gmail.com/

Many thanks,
Andrea

> 
> thanks,
> 
> greg k-h

[GIT PULL 5/5] Broadcom maintainers changes for 6.17

[Florian Fainelli]

The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:

  Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)

are available in the Git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/maintainers

for you to fetch changes up to 4a525d5d3150a3e387cb841f927f07eb4a98c368:

  MAINTAINERS: add Raspberry Pi RP1 section (2025-06-09 10:11:39 -0700)

----------------------------------------------------------------
This pull request contains MAINTAINERS file updates for 6.17, please
pull the following:

- Andrea adds the RP1 entry for all of the drivers pertaining to that
  chip

----------------------------------------------------------------
Andrea della Porta (1):
      MAINTAINERS: add Raspberry Pi RP1 section

 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

Re: [GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[patchwork-bot+linux-soc]

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Mon, 30 Jun 2025 12:02:12 -0700 you wrote:
> The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
> 
>   Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
> 
> are available in the Git repository at:
> 
>   https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/defconfig-arm64
> 
> [...]

Here is the summary with links:
  - [GIT,PULL,1/5] Broadcom defconfig-arm64 changes for 6.17
    (no matching commit)
  - [GIT,PULL,2/5] Broadcom devicetree changes for 6.17
    (no matching commit)
  - [GIT,PULL,3/5] Broadcom devicetree-arm64 changes for 6.17
    https://git.kernel.org/soc/soc/c/7eb5b8d0b2df
  - [GIT,PULL,4/5] Broadcom drivers changes for 6.17
    (no matching commit)
  - [GIT,PULL,5/5] Broadcom maintainers changes for 6.17
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[patchwork-bot+linux-soc]

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Mon, 30 Jun 2025 12:02:12 -0700 you wrote:
> The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
> 
>   Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
> 
> are available in the Git repository at:
> 
>   https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/defconfig-arm64
> 
> [...]

Here is the summary with links:
  - [GIT,PULL,1/5] Broadcom defconfig-arm64 changes for 6.17
    https://git.kernel.org/soc/soc/c/241a3be47756
  - [GIT,PULL,2/5] Broadcom devicetree changes for 6.17
    (no matching commit)
  - [GIT,PULL,3/5] Broadcom devicetree-arm64 changes for 6.17
    (no matching commit)
  - [GIT,PULL,4/5] Broadcom drivers changes for 6.17
    (no matching commit)
  - [GIT,PULL,5/5] Broadcom maintainers changes for 6.17
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[Florian Fainelli]

On 7/4/25 02:10, patchwork-bot+linux-soc@kernel.org wrote:
> Hello:
> 
> This pull request was applied to soc/soc.git (for-next)
> by Arnd Bergmann <arnd@arndb.de>:
> 
> On Mon, 30 Jun 2025 12:02:12 -0700 you wrote:
>> The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
>>
>>    Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
>>
>> are available in the Git repository at:
>>
>>    https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/defconfig-arm64
>>
>> [...]
> 
> Here is the summary with links:
>    - [GIT,PULL,1/5] Broadcom defconfig-arm64 changes for 6.17
>      https://git.kernel.org/soc/soc/c/241a3be47756
>    - [GIT,PULL,2/5] Broadcom devicetree changes for 6.17
>      (no matching commit)
>    - [GIT,PULL,3/5] Broadcom devicetree-arm64 changes for 6.17
>      (no matching commit)
>    - [GIT,PULL,4/5] Broadcom drivers changes for 6.17
>      (no matching commit)
>    - [GIT,PULL,5/5] Broadcom maintainers changes for 6.17
>      (no matching commit)

Arnd, can you also take the 3 other pull requests, it looks like only 2 
have been applied: devicetree-arm64 and defconfig-arm64. Please let me 
know if we need to do something different here, thanks!
-- 
Florian

Re: [GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[Florian Fainelli]

On 7/11/25 14:38, Florian Fainelli wrote:
> On 7/4/25 02:10, patchwork-bot+linux-soc@kernel.org wrote:
>> Hello:
>>
>> This pull request was applied to soc/soc.git (for-next)
>> by Arnd Bergmann <arnd@arndb.de>:
>>
>> On Mon, 30 Jun 2025 12:02:12 -0700 you wrote:
>>> The following changes since commit 
>>> 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
>>>
>>>    Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
>>>
>>> are available in the Git repository at:
>>>
>>>    https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/ 
>>> defconfig-arm64
>>>
>>> [...]
>>
>> Here is the summary with links:
>>    - [GIT,PULL,1/5] Broadcom defconfig-arm64 changes for 6.17
>>      https://git.kernel.org/soc/soc/c/241a3be47756
>>    - [GIT,PULL,2/5] Broadcom devicetree changes for 6.17
>>      (no matching commit)
>>    - [GIT,PULL,3/5] Broadcom devicetree-arm64 changes for 6.17
>>      (no matching commit)
>>    - [GIT,PULL,4/5] Broadcom drivers changes for 6.17
>>      (no matching commit)
>>    - [GIT,PULL,5/5] Broadcom maintainers changes for 6.17
>>      (no matching commit)
> 
> Arnd, can you also take the 3 other pull requests, it looks like only 2 
> have been applied: devicetree-arm64 and defconfig-arm64. Please let me 
> know if we need to do something different here, thanks!

Arnd, can we get the other pull requests to be applied, or have they 
somehow been applied and the notification email simply was not sent out?

Thanks!
-- 
Florian

Re: [GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[patchwork-bot+linux-soc]

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Mon, 30 Jun 2025 12:02:12 -0700 you wrote:
> The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
> 
>   Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
> 
> are available in the Git repository at:
> 
>   https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/defconfig-arm64
> 
> [...]

Here is the summary with links:
  - [GIT,PULL,1/5] Broadcom defconfig-arm64 changes for 6.17
    (no matching commit)
  - [GIT,PULL,2/5] Broadcom devicetree changes for 6.17
    (no matching commit)
  - [GIT,PULL,3/5] Broadcom devicetree-arm64 changes for 6.17
    (no matching commit)
  - [GIT,PULL,4/5] Broadcom drivers changes for 6.17
    https://git.kernel.org/soc/soc/c/aee4eeec7e5e
  - [GIT,PULL,5/5] Broadcom maintainers changes for 6.17
    https://git.kernel.org/soc/soc/c/2b12a400dd94

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[Florian Fainelli]

Hi Arnd,

On 7/21/25 08:32, patchwork-bot+linux-soc@kernel.org wrote:
> Hello:
> 
> This pull request was applied to soc/soc.git (for-next)
> by Arnd Bergmann <arnd@arndb.de>:
> 
> On Mon, 30 Jun 2025 12:02:12 -0700 you wrote:
>> The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
>>
>>    Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
>>
>> are available in the Git repository at:
>>
>>    https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/defconfig-arm64
>>
>> [...]
> 
> Here is the summary with links:
>    - [GIT,PULL,1/5] Broadcom defconfig-arm64 changes for 6.17
>      (no matching commit)
>    - [GIT,PULL,2/5] Broadcom devicetree changes for 6.17
>      (no matching commit)
>    - [GIT,PULL,3/5] Broadcom devicetree-arm64 changes for 6.17
>      (no matching commit)
>    - [GIT,PULL,4/5] Broadcom drivers changes for 6.17
>      https://git.kernel.org/soc/soc/c/aee4eeec7e5e
>    - [GIT,PULL,5/5] Broadcom maintainers changes for 6.17
>      https://git.kernel.org/soc/soc/c/2b12a400dd94

Thanks for applying the changes, can you confirm that you also intend to 
take in "[GIT,PULL,2/5] Broadcom devicetree changes for 6.17" for 6.17, 
that appears to be the only missing from your notification emails.

Cheers
-- 
Florian

Re: [GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[Arnd Bergmann]

On Tue, Jul 29, 2025, at 23:03, Florian Fainelli wrote:
> On 7/21/25 08:32, patchwork-bot+linux-soc@kernel.org wrote:
>> This pull request was applied to soc/soc.git (for-next)
>> by Arnd Bergmann <arnd@arndb.de>:
>> 
>> On Mon, 30 Jun 2025 12:02:12 -0700 you wrote:
>>> The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
>>>
>>>    Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
>>>
>>> are available in the Git repository at:
>>>
>>>    https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/defconfig-arm64
>>>
>>> [...]
>> 
>> Here is the summary with links:
>>    - [GIT,PULL,1/5] Broadcom defconfig-arm64 changes for 6.17
>>      (no matching commit)
>>    - [GIT,PULL,2/5] Broadcom devicetree changes for 6.17
>>      (no matching commit)
>>    - [GIT,PULL,3/5] Broadcom devicetree-arm64 changes for 6.17
>>      (no matching commit)
>>    - [GIT,PULL,4/5] Broadcom drivers changes for 6.17
>>      https://git.kernel.org/soc/soc/c/aee4eeec7e5e
>>    - [GIT,PULL,5/5] Broadcom maintainers changes for 6.17
>>      https://git.kernel.org/soc/soc/c/2b12a400dd94
>
> Thanks for applying the changes, can you confirm that you also intend to 
> take in "[GIT,PULL,2/5] Broadcom devicetree changes for 6.17" for 6.17, 
> that appears to be the only missing from your notification emails.

Hi Florian,

I don't know exactly what happened with the notifications. I did
pull the branches in two batches some time apart, but as far as I
can tell, they were all part of the pull requests that I sent last
week and should now be part of Linus' tree.

Can you check again if anything is still missing and send me a
follow-up pull request in that case?

I tried to make sure that the information about which branches
I pulled is visible in both linux-next/arch/arm/arm-soc-for-next-contents.txt
and in https://patchwork.kernel.org/project/linux-soc/list/, both
of which show your branches as Queued, though some other branches
are still listed as 'New' in patchwork for reasons I never quite
understood.

     Arnd

Re: [GIT PULL 1/5] Broadcom defconfig-arm64 changes for 6.17

[Florian Fainelli]

Hi Arnd,

On 7/29/25 23:00, Arnd Bergmann wrote:
> On Tue, Jul 29, 2025, at 23:03, Florian Fainelli wrote:
>> On 7/21/25 08:32, patchwork-bot+linux-soc@kernel.org wrote:
>>> This pull request was applied to soc/soc.git (for-next)
>>> by Arnd Bergmann <arnd@arndb.de>:
>>>
>>> On Mon, 30 Jun 2025 12:02:12 -0700 you wrote:
>>>> The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
>>>>
>>>>     Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>>     https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.17/defconfig-arm64
>>>>
>>>> [...]
>>>
>>> Here is the summary with links:
>>>     - [GIT,PULL,1/5] Broadcom defconfig-arm64 changes for 6.17
>>>       (no matching commit)
>>>     - [GIT,PULL,2/5] Broadcom devicetree changes for 6.17
>>>       (no matching commit)
>>>     - [GIT,PULL,3/5] Broadcom devicetree-arm64 changes for 6.17
>>>       (no matching commit)
>>>     - [GIT,PULL,4/5] Broadcom drivers changes for 6.17
>>>       https://git.kernel.org/soc/soc/c/aee4eeec7e5e
>>>     - [GIT,PULL,5/5] Broadcom maintainers changes for 6.17
>>>       https://git.kernel.org/soc/soc/c/2b12a400dd94
>>
>> Thanks for applying the changes, can you confirm that you also intend to
>> take in "[GIT,PULL,2/5] Broadcom devicetree changes for 6.17" for 6.17,
>> that appears to be the only missing from your notification emails.
> 
> Hi Florian,
> 
> I don't know exactly what happened with the notifications. I did
> pull the branches in two batches some time apart, but as far as I
> can tell, they were all part of the pull requests that I sent last
> week and should now be part of Linus' tree.
> 
> Can you check again if anything is still missing and send me a
> follow-up pull request in that case?
> 
> I tried to make sure that the information about which branches
> I pulled is visible in both linux-next/arch/arm/arm-soc-for-next-contents.txt
> and in https://patchwork.kernel.org/project/linux-soc/list/, both
> of which show your branches as Queued, though some other branches
> are still listed as 'New' in patchwork for reasons I never quite
> understood.

This all looks good, thank you very much! I just sent out another pull 
requests for two minor changes to the RP1 clock driver, I had them 
queued up after the original tag was generated and Stephen reviewed those.

Thanks!
-- 
Florian