All of lore.kernel.org
 help / color / mirror / Atom feed
From: Elle Rhumsaa <elle@weathered-steel.dev>
To: Michal Wilczynski <m.wilczynski@samsung.com>
Cc: "Uwe Kleine-König" <ukleinek@kernel.org>,
	"Miguel Ojeda" <ojeda@kernel.org>,
	"Alex Gaynor" <alex.gaynor@gmail.com>,
	"Boqun Feng" <boqun.feng@gmail.com>,
	"Gary Guo" <gary@garyguo.net>,
	"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
	"Andreas Hindborg" <a.hindborg@kernel.org>,
	"Alice Ryhl" <aliceryhl@google.com>,
	"Trevor Gross" <tmgross@umich.edu>,
	"Danilo Krummrich" <dakr@kernel.org>,
	"Guo Ren" <guoren@kernel.org>, "Fu Wei" <wefu@redhat.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Paul Walmsley" <paul.walmsley@sifive.com>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Alexandre Ghiti" <alex@ghiti.fr>,
	"Marek Szyprowski" <m.szyprowski@samsung.com>,
	"Benno Lossin" <lossin@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Drew Fustini" <fustini@kernel.org>,
	"Daniel Almeida" <daniel.almeida@collabora.com>,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org,
	rust-for-linux@vger.kernel.org, linux-riscv@lists.infradead.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v14 7/7] riscv: dts: thead: Add PWM fan and thermal control
Date: Wed, 20 Aug 2025 21:18:18 +0000	[thread overview]
Message-ID: <aKY7mnaQwZtgqryR@archiso> (raw)
In-Reply-To: <20250820-rust-next-pwm-working-fan-for-sending-v14-7-df2191621429@samsung.com>

On Wed, Aug 20, 2025 at 10:35:42AM +0200, Michal Wilczynski wrote:
> Add Device Tree nodes to enable a PWM controlled fan and it's associated
> thermal management for the Lichee Pi 4A board.
> 
> This enables temperature-controlled active cooling for the Lichee Pi 4A
> board based on SoC temperature.
> 
> Reviewed-by: Drew Fustini <fustini@kernel.org>
> Tested-by: Drew Fustini <fustini@kernel.org>
> Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
> ---
>  arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts | 67 +++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> index 4020c727f09e8e2286fdc7fecd79dbd8eba69556..c58c2085ca92a3234f1350500cedae4157f0c35f 100644
> --- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> +++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> @@ -28,9 +28,76 @@ aliases {
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> +
> +	thermal-zones {
> +		cpu-thermal {
> +			polling-delay = <1000>;
> +			polling-delay-passive = <1000>;
> +			thermal-sensors = <&pvt 0>;
> +
> +			trips {
> +				fan_config0: fan-trip0 {
> +					temperature = <39000>;
> +					hysteresis = <5000>;
> +					type = "active";
> +				};
> +
> +				fan_config1: fan-trip1 {
> +					temperature = <50000>;
> +					hysteresis = <5000>;
> +					type = "active";
> +				};
> +
> +				fan_config2: fan-trip2 {
> +					temperature = <60000>;
> +					hysteresis = <5000>;
> +					type = "active";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map-active-0 {
> +					cooling-device = <&fan 1 1>;
> +					trip = <&fan_config0>;
> +				};
> +
> +				map-active-1 {
> +					cooling-device = <&fan 2 2>;
> +					trip = <&fan_config1>;
> +				};
> +
> +				map-active-2 {
> +					cooling-device = <&fan 3 3>;
> +					trip = <&fan_config2>;
> +				};
> +			};
> +		};
> +	};
> +
> +	fan: pwm-fan {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&fan_pins>;
> +		compatible = "pwm-fan";
> +		#cooling-cells = <2>;
> +		pwms = <&pwm 1 10000000 0>;
> +		cooling-levels = <0 66 196 255>;
> +	};
> +
>  };
>  
>  &padctrl0_apsys {
> +	fan_pins: fan-0 {
> +		pwm1-pins {
> +			pins = "GPIO3_3"; /* PWM1 */
> +			function = "pwm";
> +			bias-disable;
> +			drive-strength = <25>;
> +			input-disable;
> +			input-schmitt-disable;
> +			slew-rate = <0>;
> +		};
> +	};
> +
>  	uart0_pins: uart0-0 {
>  		tx-pins {
>  			pins = "UART0_TXD";
> 
> -- 
> 2.34.1

Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>

WARNING: multiple messages have this Message-ID (diff)
From: Elle Rhumsaa <elle@weathered-steel.dev>
To: Michal Wilczynski <m.wilczynski@samsung.com>
Cc: "Uwe Kleine-König" <ukleinek@kernel.org>,
	"Miguel Ojeda" <ojeda@kernel.org>,
	"Alex Gaynor" <alex.gaynor@gmail.com>,
	"Boqun Feng" <boqun.feng@gmail.com>,
	"Gary Guo" <gary@garyguo.net>,
	"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
	"Andreas Hindborg" <a.hindborg@kernel.org>,
	"Alice Ryhl" <aliceryhl@google.com>,
	"Trevor Gross" <tmgross@umich.edu>,
	"Danilo Krummrich" <dakr@kernel.org>,
	"Guo Ren" <guoren@kernel.org>, "Fu Wei" <wefu@redhat.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Paul Walmsley" <paul.walmsley@sifive.com>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Alexandre Ghiti" <alex@ghiti.fr>,
	"Marek Szyprowski" <m.szyprowski@samsung.com>,
	"Benno Lossin" <lossin@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Drew Fustini" <fustini@kernel.org>,
	"Daniel Almeida" <daniel.almeida@collabora.com>,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org,
	rust-for-linux@vger.kernel.org, linux-riscv@lists.infradead.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v14 7/7] riscv: dts: thead: Add PWM fan and thermal control
Date: Wed, 20 Aug 2025 21:18:18 +0000	[thread overview]
Message-ID: <aKY7mnaQwZtgqryR@archiso> (raw)
In-Reply-To: <20250820-rust-next-pwm-working-fan-for-sending-v14-7-df2191621429@samsung.com>

On Wed, Aug 20, 2025 at 10:35:42AM +0200, Michal Wilczynski wrote:
> Add Device Tree nodes to enable a PWM controlled fan and it's associated
> thermal management for the Lichee Pi 4A board.
> 
> This enables temperature-controlled active cooling for the Lichee Pi 4A
> board based on SoC temperature.
> 
> Reviewed-by: Drew Fustini <fustini@kernel.org>
> Tested-by: Drew Fustini <fustini@kernel.org>
> Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
> ---
>  arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts | 67 +++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> index 4020c727f09e8e2286fdc7fecd79dbd8eba69556..c58c2085ca92a3234f1350500cedae4157f0c35f 100644
> --- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> +++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> @@ -28,9 +28,76 @@ aliases {
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> +
> +	thermal-zones {
> +		cpu-thermal {
> +			polling-delay = <1000>;
> +			polling-delay-passive = <1000>;
> +			thermal-sensors = <&pvt 0>;
> +
> +			trips {
> +				fan_config0: fan-trip0 {
> +					temperature = <39000>;
> +					hysteresis = <5000>;
> +					type = "active";
> +				};
> +
> +				fan_config1: fan-trip1 {
> +					temperature = <50000>;
> +					hysteresis = <5000>;
> +					type = "active";
> +				};
> +
> +				fan_config2: fan-trip2 {
> +					temperature = <60000>;
> +					hysteresis = <5000>;
> +					type = "active";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map-active-0 {
> +					cooling-device = <&fan 1 1>;
> +					trip = <&fan_config0>;
> +				};
> +
> +				map-active-1 {
> +					cooling-device = <&fan 2 2>;
> +					trip = <&fan_config1>;
> +				};
> +
> +				map-active-2 {
> +					cooling-device = <&fan 3 3>;
> +					trip = <&fan_config2>;
> +				};
> +			};
> +		};
> +	};
> +
> +	fan: pwm-fan {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&fan_pins>;
> +		compatible = "pwm-fan";
> +		#cooling-cells = <2>;
> +		pwms = <&pwm 1 10000000 0>;
> +		cooling-levels = <0 66 196 255>;
> +	};
> +
>  };
>  
>  &padctrl0_apsys {
> +	fan_pins: fan-0 {
> +		pwm1-pins {
> +			pins = "GPIO3_3"; /* PWM1 */
> +			function = "pwm";
> +			bias-disable;
> +			drive-strength = <25>;
> +			input-disable;
> +			input-schmitt-disable;
> +			slew-rate = <0>;
> +		};
> +	};
> +
>  	uart0_pins: uart0-0 {
>  		tx-pins {
>  			pins = "UART0_TXD";
> 
> -- 
> 2.34.1

Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2025-08-20 21:18 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20250820083539eucas1p127f39561c51a44d7d2b5ace73b5eca7b@eucas1p1.samsung.com>
2025-08-20  8:35 ` [PATCH v14 0/7] Rust Abstractions for PWM subsystem with TH1520 PWM driver Michal Wilczynski
2025-08-20  8:35   ` Michal Wilczynski
2025-08-20  8:35   ` [PATCH v14 1/7] pwm: Export `pwmchip_release` for external use Michal Wilczynski
2025-08-20  8:35     ` Michal Wilczynski
2025-08-20 20:30     ` Elle Rhumsaa
2025-08-20 20:30       ` Elle Rhumsaa
2025-09-15 10:00     ` Uwe Kleine-König
2025-09-15 10:00       ` Uwe Kleine-König
2025-09-24 19:30       ` Michal Wilczynski
2025-09-24 19:30         ` Michal Wilczynski
2025-08-20  8:35   ` [PATCH v14 2/7] rust: pwm: Add Kconfig and basic data structures Michal Wilczynski
2025-08-20  8:35     ` Michal Wilczynski
2025-08-20 20:35     ` Elle Rhumsaa
2025-08-20 20:35       ` Elle Rhumsaa
2025-09-15 10:13     ` Uwe Kleine-König
2025-09-15 10:13       ` Uwe Kleine-König
2025-09-24 20:10       ` Michal Wilczynski
2025-09-24 20:10         ` Michal Wilczynski
2025-08-20  8:35   ` [PATCH v14 3/7] rust: pwm: Add complete abstraction layer Michal Wilczynski
2025-08-20  8:35     ` Michal Wilczynski
2025-08-20 21:11     ` Elle Rhumsaa
2025-08-20 21:11       ` Elle Rhumsaa
2025-08-21 22:35       ` Michal Wilczynski
2025-08-21 22:35         ` Michal Wilczynski
2025-08-20  8:35   ` [PATCH v14 4/7] pwm: Add Rust driver for T-HEAD TH1520 SoC Michal Wilczynski
2025-08-20  8:35     ` Michal Wilczynski
2025-08-20 21:14     ` Elle Rhumsaa
2025-08-20 21:14       ` Elle Rhumsaa
2025-09-19  7:10     ` Uwe Kleine-König
2025-09-19  7:10       ` Uwe Kleine-König
2025-09-25 11:33       ` Michal Wilczynski
2025-09-25 11:33         ` Michal Wilczynski
2025-08-20  8:35   ` [PATCH v14 5/7] dt-bindings: pwm: thead: Add T-HEAD TH1520 PWM controller Michal Wilczynski
2025-08-20  8:35     ` Michal Wilczynski
2025-08-20 21:16     ` Elle Rhumsaa
2025-08-20 21:16       ` Elle Rhumsaa
2025-08-20  8:35   ` [PATCH v14 6/7] riscv: dts: thead: Add PWM controller node Michal Wilczynski
2025-08-20  8:35     ` Michal Wilczynski
2025-08-20 21:17     ` Elle Rhumsaa
2025-08-20 21:17       ` Elle Rhumsaa
2025-08-20  8:35   ` [PATCH v14 7/7] riscv: dts: thead: Add PWM fan and thermal control Michal Wilczynski
2025-08-20  8:35     ` Michal Wilczynski
2025-08-20 21:18     ` Elle Rhumsaa [this message]
2025-08-20 21:18       ` Elle Rhumsaa
2025-08-22 20:49     ` Drew Fustini
2025-08-22 20:49       ` Drew Fustini
2025-08-23 10:13       ` Michal Wilczynski
2025-08-23 10:13         ` Michal Wilczynski
2025-08-23 10:17         ` Michal Wilczynski
2025-08-23 10:17           ` Michal Wilczynski
2025-08-23 14:20         ` Miguel Ojeda
2025-08-23 14:20           ` Miguel Ojeda
2025-09-12 12:30   ` [PATCH v14 0/7] Rust Abstractions for PWM subsystem with TH1520 PWM driver Michal Wilczynski
2025-09-12 12:30     ` Michal Wilczynski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aKY7mnaQwZtgqryR@archiso \
    --to=elle@weathered-steel.dev \
    --cc=a.hindborg@kernel.org \
    --cc=alex.gaynor@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=aliceryhl@google.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=bjorn3_gh@protonmail.com \
    --cc=boqun.feng@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=dakr@kernel.org \
    --cc=daniel.almeida@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fustini@kernel.org \
    --cc=gary@garyguo.net \
    --cc=guoren@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=lossin@kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=m.wilczynski@samsung.com \
    --cc=mturquette@baylibre.com \
    --cc=ojeda@kernel.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh@kernel.org \
    --cc=rust-for-linux@vger.kernel.org \
    --cc=tmgross@umich.edu \
    --cc=ukleinek@kernel.org \
    --cc=wefu@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.