From: Daniel Golle <daniel@makrotopia.org>
To: Jakub Kicinski <kuba@kernel.org>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>,
netdev@vger.kernel.org, Hauke Mehrtens <hauke@hauke-m.de>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>
Subject: Re: [PATCH net 0/2] lantiq_gswip fixes
Date: Sat, 20 Sep 2025 02:07:25 +0100 [thread overview]
Message-ID: <aM3-Tf9kHkNP2XRN@pidgin.makrotopia.org> (raw)
In-Reply-To: <20250919165008.247549ab@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 1897 bytes --]
Hi Vladimir,
Hi Jakub,
sorry for the late reply.
I got both patches in my testing tree for long time and can confirm that
both are fixing real issues.
On Fri, Sep 19, 2025 at 04:50:08PM -0700, Jakub Kicinski wrote:
> On Thu, 18 Sep 2025 10:21:40 +0300 Vladimir Oltean wrote:
> > This is a small set of fixes which I believe should be backported for
> > the lantiq_gswip driver. Daniel Golle asked me to submit them here:
> > https://lore.kernel.org/netdev/aLiDfrXUbw1O5Vdi@pidgin.makrotopia.org/
> >
> > As mentioned there, a merge conflict with net-next is expected, due to
> > the movement of the driver to the 'drivers/net/dsa/lantiq' folder there.
> > Good luck :-/
> >
> > Patch 2/2 fixes an old regression and is the minimal fix for that, as
> > discussed here:
> > https://lore.kernel.org/netdev/aJfNMLNoi1VOsPrN@pidgin.makrotopia.org/
> >
> > Patch 1/2 was identified by me through static analysis, and I consider
> > it to be a serious deficiency. It needs a test tag.
>
> Daniel, can we count on your for that?
I have now built the 'net' tree with only the two patches on top, and run
local_termination.sh for basic testing before and after. I've attached the
results of both test runs, before and after applying both patches.
Consider the whole series
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
I hope we can proceed with the other important fixes Vladimir has pulled
out of his slieve[1], however, I agree that not all of them should go via
the 'net' tree, and I suppose (speaking for all of OpenWrt, which is the
main user when it comes to devices with Lantiq SoC containing those
switches) that going via net-next is fine -- we can still backport
individual commits, or even all of them, and apply them on OpenWrt's
current Linux 6.12 kernel sources.
[1]: https://github.com/vladimiroltean/linux/commits/lantiq-gswip/
[-- Attachment #2: before.txt --]
[-- Type: text/plain, Size: 48001 bytes --]
(AVM) EVA Revision: 1.1964 Version: 2964
(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (0) 3 0x0-0x740D
[FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 16 sectors a 64kB)
[NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW
[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
.Atheros 8030/35 detected
Eva_AVM >##..................................................................
[ 0.000000] Linux version 6.17.0-rc5+ (daniel@mixxxtop) (mips-openwrt-linux-gnu-gcc (OpenWrt GCC 14.3.0 r30716+1-56b083221f) 14.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Sep 4 23:19:13 2025
[ 0.000000] SoC: xRX200 rev 1.2
[ 0.000000] printk: legacy bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is AVM FRITZ!Box 7490 (Micron NAND)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] Detected 1 available secondary CPU(s)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] percpu: Embedded 12 pages/cpu s18224 r8192 d22736 u49152
[ 0.000000] Kernel command line: console=ttyLTQ0,115200
[ 0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Writing ErrCtl register=00042003
[ 0.000000] Readback ErrCtl register=00042003
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65536
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.000000] NR_IRQS: 256
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] CPU Clock: 500MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
[ 0.010000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.090000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.100000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.130000] rcu: Hierarchical SRCU implementation.
[ 0.140000] rcu: Max phase no-delay instances is 1000.
[ 0.140000] smp: Bringing up secondary CPUs ...
[ 0.150000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.150000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.150000] CPU1 revision is: 00019556 (MIPS 34Kc)
[ 0.200000] Counter synchronization [CPU#0 -> CPU#1]: passed
[ 0.210000] smp: Brought up 1 node, 2 CPUs
[ 0.210000] Memory: 246400K/262144K available (8707K kernel code, 638K rwdata, 1068K rodata, 1284K init, 219K bss, 14608K reserved, 0K cma-reserved)
[ 0.230000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.240000] posixtimers hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.240000] futex hash table entries: 512 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
[ 0.260000] pinctrl core: initialized pinctrl subsystem
[ 0.270000] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.280000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[ 0.290000] /fpi@10000000/pinmux@e100b10: Fixed dependency cycle(s) with /fpi@10000000/pinmux@e100b10/pinmux
[ 0.300000] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.310000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[ 0.330000] usbcore: registered new interface driver usbfs
[ 0.340000] usbcore: registered new interface driver hub
[ 0.340000] usbcore: registered new device driver usb
[ 0.350000] clocksource: Switched to clocksource MIPS
[ 0.370000] NET: Registered PF_INET protocol family
[ 0.370000] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.380000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.390000] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.400000] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.410000] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.410000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.420000] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.430000] UDP hash table entries: 256 (order: 1, 14336 bytes, linear)
[ 0.440000] UDP-Lite hash table entries: 256 (order: 1, 14336 bytes, linear)
[ 0.440000] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.450000] PCI: CLS 0 bytes, default 32
[ 0.450000] gptu: totally 6 16-bit timers/counters
[ 0.460000] gptu: misc_register on minor 256
[ 0.460000] gptu: succeeded to request irq 126
[ 0.470000] gptu: succeeded to request irq 127
[ 0.470000] gptu: succeeded to request irq 128
[ 0.480000] gptu: succeeded to request irq 129
[ 0.480000] gptu: succeeded to request irq 130
[ 0.490000] gptu: succeeded to request irq 131
[ 0.490000] No VPEs reserved for AP/SP, not initialize VPE loader
[ 0.490000] Pass maxvpes=<n> argument as kernel argument
[ 0.500000] No TCs reserved for AP/SP, not initializing RTLX.
[ 0.500000] Pass maxtcs=<n> argument as kernel argument
[ 0.520000] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.530000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.540000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.560000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[ 0.570000] printk: legacy console [ttyLTQ0] enabled
[ 0.570000] printk: legacy console [ttyLTQ0] enabled
[ 0.580000] printk: legacy bootconsole [early0] disabled
[ 0.580000] printk: legacy bootconsole [early0] disabled
[ 0.600000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
[ 0.600000] nand: Micron MT29F4G08ABADAWP
[ 0.600000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.620000] Scanning device for bad blocks
[ 0.670000] Bad eraseblock 660 at 0x000005280000
[ 0.670000] Bad eraseblock 692 at 0x000005680000
[ 0.910000] 2 fixed-partitions partitions found on MTD device 14000000.nand
[ 0.920000] Creating 2 MTD partitions on "14000000.nand":
[ 0.920000] 0x000000000000-0x000000400000 : "kernel"
[ 0.930000] 0x000000400000-0x000020000000 : "ubi"
[ 0.950000] spi-lantiq-ssc 1e100800.spi: Lantiq SSC SPI controller (Rev 8, TXFS 8, RXFS 8, DMA 1)
[ 0.960000] spi-nor spi0.4: supply vcc not found, using dummy regulator
[ 0.970000] 3 fixed-partitions partitions found on MTD device spi0.4
[ 0.970000] Creating 3 MTD partitions on "spi0.4":
[ 0.980000] 0x000000000000-0x000000040000 : "urlader"
[ 0.980000] 0x000000040000-0x0000000a0000 : "tffs (1)"
[ 0.990000] 0x0000000a0000-0x000000100000 : "tffs (2)"
[ 1.010000] NET: Registered PF_INET6 protocol family
[ 1.030000] Segment Routing with IPv6
[ 1.030000] In-situ OAM (IOAM) with IPv6
[ 1.040000] NET: Registered PF_PACKET protocol family
[ 1.040000] 8021q: 802.1Q VLAN Support v1.8
[ 1.110000] pcie-xrx200 1d900000.pcie: switch pcie endianess requested
[ 1.260000] PCI host bridge to bus 0000:00
[ 1.260000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[ 1.270000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
[ 1.270000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.280000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
[ 1.300000] pci 0000:00:00.0: 0x80848e10 took 17148 usecs
[ 1.300000] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060400 PCIe Root Port
[ 1.310000] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.310000] pci 0000:00:00.0: bridge window [io 0x1d800000-0x1d8fffff]
[ 1.320000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cffffff]
[ 1.330000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cffffff pref]
[ 1.340000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.340000] pci 0000:01:00.0: [1912:0015] type 00 class 0x0c0330 PCIe Endpoint
[ 1.350000] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[ 1.360000] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.360000] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 1.380000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.380000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.390000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]: assigned
[ 1.400000] pci 0000:01:00.0: BAR 0 [mem 0x1c000000-0x1c001fff 64bit]: assigned
[ 1.400000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.410000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]
[ 1.420000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[ 1.420000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[ 1.430000] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.440000] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 7.190000] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[ 7.190000] pci 0000:01:00.0: 0x805ad224 took 5623107 usecs
[ 7.200000] UBI: auto-attach mtd1
[ 7.200000] ubi0: attaching mtd1
[ 8.880000] ubi0: scanning is finished
[ 8.900000] ubi0: attached mtd1 (name "ubi", size 508 MiB)
[ 8.910000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 8.910000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 8.920000] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[ 8.930000] ubi0: good PEBs: 4062, bad PEBs: 2, corrupted PEBs: 0
[ 8.930000] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 8.940000] ubi0: max/mean erase counter: 14/6, WL threshold: 4096, image sequence number: 699232088
[ 8.950000] ubi0: available PEBs: 0, total reserved PEBs: 4062, PEBs reserved for bad PEB handling: 78
[ 8.960000] ubi0: background thread "ubi_bgt0d" started, PID 310
[ 8.960000] block ubiblock0_0: created from ubi0:0(rootfs)
[ 8.970000] ubiblock: device ubiblock0_0 (rootfs) set to be root files[ 8.980000] check access for rdinit=/init failed: -2, ignoring
[ 8.990000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 9.000000] Freeing unused kernel image (initmem) memory: 1284K
[ 9.000000] This architecture does not have kernel memory protection.
[ 9.010000] Run /sbin/init as init process
[ 10.410000] init: Console is alive
[ 10.410000] init: - watchdog -
[ 11.370000] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 11.640000] SCSI subsystem initialized
[ 11.660000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 11.660000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 11.670000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 11.680000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 12.120000] xhci-pci-renesas 0000:01:00.0: xHCI Host Controller
[ 12.130000] xhci-pci-renesas 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 12.140000] xhci-pci-renesas 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000000100000090
[ 12.150000] xhci-pci-renesas 0000:01:00.0: xHCI Host Controller
[ 12.150000] xhci-pci-renesas 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 12.160000] xhci-pci-renesas 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 12.170000] hub 1-0:1.0: USB hub found
[ 12.170000] hub 1-0:1.0: 2 ports detected
[ 12.180000] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 12.190000] hub 2-0:1.0: USB hub found
[ 12.190000] hub 2-0:1.0: 2 ports detected
[ 12.210000] usbcore: registered new interface driver usb-storage
[ 12.220000] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 12.230000] init: - preinit -
[ 13.310000] usb 2-2: new SuperSpeed USB device number 2 using xhci-pci-renesas
[ 15.520000] random: crng init done
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 23.070000] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 23.080000] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 482
[ 23.130000] UBIFS (ubi0:1): recovery needed
[ 23.250000] UBIFS (ubi0:1): recovery completed
[ 23.250000] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 23.260000] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 23.270000] UBIFS (ubi0:1): FS size: 452616192 bytes (431 MiB, 3508 LEBs), max 3523 LEBs, journal size 22708224 bytes (21 MiB, 176 LEBs)
[ 23.280000] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 23.290000] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID BCD8DFDD-8055-4773-BDB8-AAC44BCE2457, small LPT model
[ 23.300000] mount_root: switching to ubifs overlay
[ 23.320000] urandom-seed: Seeding with /etc/urandom.seed
[ 23.480000] procd: - early -
[ 23.480000] procd: - watchdog -
[ 24.320000] procd: - watchdog -
[ 24.330000] procd: - ubus -
[ 24.530000] procd: - init -
Please press Enter to activate this console.
[ 26.840000] kmodloader: loading kernel modules from /etc/modules.d/*
[ 28.830000] urngd: v1.0.2 started.
[ 29.290000] gswip 1e108000.switch: configuring for fixed/internal link mode
[ 29.300000] gswip 1e108000.switch: Link is Up - 1Gbps/Full - flow control off
[ 29.390000] gswip 1e108000.switch lan3 (uninitialized): PHY [1e108000.switch-mii:00] driver [Qualcomm Atheros AR8035] (irq=POLL)
[ 29.490000] gswip 1e108000.switch lan4 (uninitialized): PHY [1e108000.switch-mii:01] driver [Qualcomm Atheros AR8035] (irq=POLL)
[ 29.520000] gswip 1e108000.switch lan2 (uninitialized): PHY [1e108000.switch-mii:11] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
[ 29.580000] gswip 1e108000.switch lan1 (uninitialized): PHY [1e108000.switch-mii:13] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
[ 29.610000] lantiq,xrx200-net 1e10b308.eth eth0: entered promiscuous mode
[ 29.620000] DSA: tree 0 setup
[ 29.620000] gswip 1e108000.switch: probed GSWIP version 21 mod 0
[ 29.660000] GACT probability on
[ 29.680000] Mirror/redirect action on
[ 29.740000] u32 classifier
[ 29.740000] input device check on
[ 29.750000] Actions configured
[ 30.200000] mdio_netlink: loading out-of-tree module taints kernel.
[ 30.270000] usbcore: registered new device driver r8152-cfgselector
[ 30.460000] r8152-cfgselector 2-2: reset SuperSpeed USB device number 2 using xhci-pci-renesas
[ 30.940000] r8152 2-2:1.0 eth1: v1.12.13
[ 30.940000] usbcore: registered new interface driver r8152
[ 30.960000] usbcore: registered new interface driver rtl8150
[ 30.990000] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 39.590000] br-lan: port 1(eth1) entered blocking state
[ 39.590000] br-lan: port 1(eth1) entered disabled state
[ 39.590000] r8152 2-2:1.0 eth1: entered allmulticast mode
[ 39.600000] r8152 2-2:1.0 eth1: entered promiscuous mode
[ 39.680000] br-lan: port 1(eth1) entered blocking state
[ 39.680000] br-lan: port 1(eth1) entered forwarding state
[ 40.490000] br-lan: port 1(eth1) entered disabled state
[ 43.360000] r8152 2-2:1.0 eth1: Promiscuous mode enabled
[ 43.360000] r8152 2-2:1.0 eth1: carrier on
[ 43.370000] br-lan: port 1(eth1) entered blocking state
[ 43.380000] br-lan: port 1(eth1) entered forwarding state
BusyBox v1.37.0 (2025-09-04 23:19:13 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r30959+10-b4294bc980
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
OpenWrt recently switched to the "apk" package manager!
OPKG Command APK Equivalent Description
------------------------------------------------------------------
opkg install <pkg> apk add <pkg> Install a package
opkg remove <pkg> apk del <pkg> Remove a package
opkg upgrade apk upgrade Upgrade all packages
opkg files <pkg> apk info -L <pkg> List package contents
opkg list-installed apk info List installed packages
opkg update apk update Update package lists
opkg search <pkg> apk search <pkg> Search for packages
------------------------------------------------------------------
For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet
root@OpenWrt:~# cd /selftests/drivers/net/dsa/
root@OpenWrt:/selftests/drivers/net/dsa# ./local_termination.sh lan1 lan2 lan3 lan4
[ 149.240000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 149.270000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 151.370000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 152.410000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 157.820000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 158.280000] gswip 1e108000.switch lan1: Link is Down
[ 158.300000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 158.590000] gswip 1e108000.switch lan2: left promiscuous mode
[ 158.600000] gswip 1e108000.switch lan2: Link is Down
[ 158.620000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 158.830000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 161.440000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 161.760000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 181.320000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 181.320000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 186.930000] gswip 1e108000.switch lan2: left allmulticast mode
[ 186.940000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
TEST: lan2: Unicast IPv4 to primary MAC address [ OK ]
TEST: lan2: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: lan2: Multicast IPv4 to joined group [ OK ]
TEST: lan2: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: lan2: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: lan2: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: lan2: Multicast IPv6 to joined group [ OK ]
TEST: lan2: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: lan2: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: lan2: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: lan2: 1588v2 over L2 transport, Sync [ OK ]
TEST: lan2: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: lan2: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: lan2: 1588v2 over IPv4, Sync [ OK ]
TEST: lan2: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: lan2: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: lan2: 1588v2 over IPv6, Sync [ OK ]
TEST: lan2: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: lan2: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 198.700000] gswip 1e108000.switch lan2: left promiscuous mode
[ 198.730000] gswip 1e108000.switch lan2: Link is Down
[ 198.960000] gswip 1e108000.switch lan1: Link is Down
[ 199.580000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 199.770000] br0: port 1(lan2) entered blocking state
[ 199.780000] br0: port 1(lan2) entered disabled state
[ 199.780000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 199.790000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 199.820000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 199.830000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 199.840000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 199.850000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 199.880000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 199.910000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 200.330000] br0: entered promiscuous mode
[ 202.730000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 203.130000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 203.130000] br0: port 1(lan2) entered blocking state
[ 203.140000] br0: port 1(lan2) entered forwarding state
[ 222.360000] br0: entered allmulticast mode
[ 227.960000] br0: left allmulticast mode
TEST: vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to joined group [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to joined group [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 231.700000] br0: left promiscuous mode
[ 231.890000] br0: port 1(lan2) entered disabled state
[ 232.200000] gswip 1e108000.switch lan2: left allmulticast mode
[ 232.200000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 232.210000] gswip 1e108000.switch lan2: left promiscuous mode
[ 232.210000] br0: port 1(lan2) entered disabled state
[ 232.220000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 232.230000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 232.240000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 232.240000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 232.440000] gswip 1e108000.switch lan1: Link is Down
[ 232.990000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 233.170000] br0: port 1(lan2) entered blocking state
[ 233.180000] br0: port 1(lan2) entered disabled state
[ 233.180000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 233.190000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 233.200000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 233.210000] br0: port 1(lan2) entered blocking state
[ 233.210000] br0: port 1(lan2) entered forwarding state
[ 233.230000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 233.250000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 233.250000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 233.270000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 233.300000] gswip 1e108000.switch lan2: Link is Down
[ 233.300000] br0: port 1(lan2) entered disabled state
[ 233.750000] br0: entered promiscuous mode
[ 235.360000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 235.360000] br0: port 1(lan2) entered blocking state
[ 235.370000] br0: port 1(lan2) entered forwarding state
[ 236.160000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 255.280000] br0: entered allmulticast mode
[ 260.870000] br0: left allmulticast mode
TEST: vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to joined group [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to joined group [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 264.710000] br0: left promiscuous mode
[ 264.890000] br0: port 1(lan2) entered disabled state
[ 265.160000] gswip 1e108000.switch lan2: left allmulticast mode
[ 265.170000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 265.170000] gswip 1e108000.switch lan2: left promiscuous mode
[ 265.180000] br0: port 1(lan2) entered disabled state
[ 265.190000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 265.190000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 265.200000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 265.210000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 265.390000] gswip 1e108000.switch lan1: Link is Down
[ 265.530000] gswip 1e108000.switch lan2: Link is Down
[ 265.950000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 266.470000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 266.920000] gswip 1e108000.switch lan2: left promiscuous mode
[ 266.930000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 267.340000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 269.040000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 269.600000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 284.710000] lan2.100: entered promiscuous mode
[ 290.290000] lan2.100: left promiscuous mode
[ 293.250000] lan2.100: entered allmulticast mode
[ 293.250000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 293.250000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 298.870000] lan2.100: left allmulticast mode
[ 298.870000] gswip 1e108000.switch lan2: left allmulticast mode
[ 298.870000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
TEST: VLAN upper: Unicast IPv4 to primary MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to macvlan MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, promisc [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to joined group [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to unknown group [ OK ]
TEST: VLAN upper: Multicast IPv4 to unknown group, promisc [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to unknown group, allmulti [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to joined group [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to unknown group [ OK ]
TEST: VLAN upper: Multicast IPv6 to unknown group, promisc [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to unknown group, allmulti [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Peer Delay Request [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Peer Delay Request [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Peer Delay Request [FAIL]
reception failed
[ 309.610000] gswip 1e108000.switch lan2: left promiscuous mode
[ 309.730000] gswip 1e108000.switch lan2: Link is Down
[ 310.080000] gswip 1e108000.switch lan1: Link is Down
[ 310.520000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 310.650000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 311.200000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 311.650000] gswip 1e108000.switch lan2: left promiscuous mode
[ 311.670000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 311.680000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 312.130000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 312.130000] br0: port 1(lan2) entered blocking state
[ 312.140000] br0: port 1(lan2) entered disabled state
[ 312.140000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 312.150000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 312.180000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 312.210000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 312.210000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 312.240000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 314.330000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 315.290000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 315.290000] br0: port 1(lan2) entered blocking state
[ 315.300000] br0: port 1(lan2) entered forwarding state
[ 326.280000] lan2.100: entered promiscuous mode
[ 331.880000] lan2.100: left promiscuous mode
[ 334.860000] lan2.100: entered allmulticast mode
[ 340.450000] lan2.100: left allmulticast mode
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 351.740000] gswip 1e108000.switch lan2: left allmulticast mode
[ 351.740000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 351.750000] br0: port 1(lan2) entered disabled state
[ 351.760000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 351.770000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 351.780000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 351.790000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 352.030000] gswip 1e108000.switch lan2: Link is Down
[ 352.400000] gswip 1e108000.switch lan1: Link is Down
[ 352.850000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 353.510000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 354.010000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 354.390000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 354.390000] br0: port 1(lan2) entered blocking state
[ 354.400000] br0: port 1(lan2) entered disabled state
[ 354.400000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 354.410000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 354.420000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 354.430000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 354.450000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 354.450000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 356.640000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 357.530000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 357.530000] br0: port 1(lan2) entered blocking state
[ 357.540000] br0: port 1(lan2) entered forwarding state
[ 368.030000] lan2.100: entered promiscuous mode
[ 373.680000] lan2.100: left promiscuous mode
[ 376.660000] lan2.100: entered allmulticast mode
[ 382.240000] lan2.100: left allmulticast mode
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 394.100000] gswip 1e108000.switch lan2: left allmulticast mode
[ 394.100000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 394.110000] br0: port 1(lan2) entered disabled state
[ 394.120000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 394.120000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 394.140000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 394.140000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 394.150000] gswip 1e108000.switch: bridge to leave does not exists
[ 394.160000] gswip 1e108000.switch: port 2 failed to reset VLAN filtering to 0: -ENOENT
[ 394.290000] gswip 1e108000.switch: bridge to leave does not exists
[ 394.290000] gswip 1e108000.switch lan2: failed to kill vid 8100/100
[ 394.430000] gswip 1e108000.switch lan2: Link is Down
[ 394.810000] gswip 1e108000.switch lan1: Link is Down
[ 395.390000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 395.780000] br0: port 1(lan2) entered blocking state
[ 395.780000] br0: port 1(lan2) entered disabled state
[ 395.780000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 395.790000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 395.820000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 395.820000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 395.840000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 395.840000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 395.910000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 396.520000] br0: entered promiscuous mode
[ 398.010000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 398.010000] br0: port 1(lan2) entered blocking state
[ 398.020000] br0: port 1(lan2) entered forwarding state
[ 398.560000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 409.260000] br0.100: entered promiscuous mode
[ 414.880000] br0.100: left promiscuous mode
[ 417.870000] br0.100: entered allmulticast mode
[ 417.870000] br0: entered allmulticast mode
[ 423.500000] br0.100: left allmulticast mode
[ 423.500000] br0: left allmulticast mode
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 427.270000] br0: left promiscuous mode
[ 427.510000] br0: port 1(lan2) entered disabled state
[ 427.750000] gswip 1e108000.switch lan2: left allmulticast mode
[ 427.750000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 427.760000] br0: port 1(lan2) entered disabled state
[ 427.760000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 427.770000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 427.780000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 427.790000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 428.040000] gswip 1e108000.switch lan1: Link is Down
[ 428.160000] gswip 1e108000.switch lan2: Link is Down
[ 428.600000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 428.970000] br0: port 1(lan2) entered blocking state
[ 428.980000] br0: port 1(lan2) entered disabled state
[ 428.980000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 428.990000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 429.010000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 1 to fdb: -22
[ 429.020000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 0 to fdb: -22
[ 429.050000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 429.050000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 429.700000] br0: entered promiscuous mode
[ 429.820000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 100 to fdb: -22
[ 429.880000] gswip 1e108000.switch: port 2 failed to add 00:00:de:ad:be:ee vid 100 to fdb: -22
[ 431.280000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 431.290000] br0: port 1(lan2) entered blocking state
[ 431.290000] br0: port 1(lan2) entered forwarding state
[ 431.760000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 442.290000] br0.100: entered promiscuous mode
[ 447.910000] br0.100: left promiscuous mode
[ 450.900000] br0.100: entered allmulticast mode
[ 450.900000] br0: entered allmulticast mode
[ 456.500000] br0.100: left allmulticast mode
[ 456.500000] br0: left allmulticast mode
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 460.360000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 100 from fdb: -2
[ 460.390000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 100 from fdb: -2
[ 460.420000] br0: left promiscuous mode
[ 460.640000] br0: port 1(lan2) entered disabled state
[ 460.930000] gswip 1e108000.switch lan2: left allmulticast mode
[ 460.940000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 460.940000] br0: port 1(lan2) entered disabled state
[ 460.950000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 1 from fdb: -2
[ 460.960000] gswip 1e108000.switch: port 2 failed to delete 00:01:02:03:04:02 vid 0 from fdb: -2
[ 460.970000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 1 from fdb: -2
[ 460.970000] gswip 1e108000.switch: port 2 failed to delete 00:00:de:ad:be:ee vid 0 from fdb: -2
[ 461.240000] gswip 1e108000.switch lan1: Link is Down
[ 461.440000] gswip 1e108000.switch lan2: Link is Down
root@OpenWrt:/selftests/drivers/net/dsa#
[-- Attachment #3: after.txt --]
[-- Type: text/plain, Size: 42960 bytes --]
(AVM) EVA Revision: 1.1964 Version: 2964
(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (0) 3 0x0-0x740D
[FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 16 sectors a 64kB)
[NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW
[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
.Atheros 8030/35 detected
Eva_AVM >##..................................................................
[ 0.000000] Linux version 6.17.0-rc5+ (daniel@mixxxtop) (mips-openwrt-linux-gnu-gcc (OpenWrt GCC 14.3.0 r30716+1-56b083221f) 14.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Sep 4 23:19:13 2025
[ 0.000000] SoC: xRX200 rev 1.2
[ 0.000000] printk: legacy bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is AVM FRITZ!Box 7490 (Micron NAND)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] Detected 1 available secondary CPU(s)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] percpu: Embedded 12 pages/cpu s18224 r8192 d22736 u49152
[ 0.000000] Kernel command line: console=ttyLTQ0,115200
[ 0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Writing ErrCtl register=00042000
[ 0.000000] Readback ErrCtl register=00042000
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65536
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.000000] NR_IRQS: 256
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] CPU Clock: 500MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
[ 0.010000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.090000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.100000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.130000] rcu: Hierarchical SRCU implementation.
[ 0.140000] rcu: Max phase no-delay instances is 1000.
[ 0.140000] smp: Bringing up secondary CPUs ...
[ 0.150000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.150000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.150000] CPU1 revision is: 00019556 (MIPS 34Kc)
[ 0.200000] Counter synchronization [CPU#0 -> CPU#1]: passed
[ 0.210000] smp: Brought up 1 node, 2 CPUs
[ 0.210000] Memory: 246400K/262144K available (8707K kernel code, 638K rwdata, 1068K rodata, 1284K init, 219K bss, 14608K reserved, 0K cma-reserved)
[ 0.230000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.240000] posixtimers hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.240000] futex hash table entries: 512 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).
[ 0.260000] pinctrl core: initialized pinctrl subsystem
[ 0.270000] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.280000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[ 0.290000] /fpi@10000000/pinmux@e100b10: Fixed dependency cycle(s) with /fpi@10000000/pinmux@e100b10/pinmux
[ 0.300000] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.310000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[ 0.330000] usbcore: registered new interface driver usbfs
[ 0.340000] usbcore: registered new interface driver hub
[ 0.340000] usbcore: registered new device driver usb
[ 0.350000] clocksource: Switched to clocksource MIPS
[ 0.370000] NET: Registered PF_INET protocol family
[ 0.370000] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.380000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.390000] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.400000] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.410000] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.410000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.420000] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.430000] UDP hash table entries: 256 (order: 1, 14336 bytes, linear)
[ 0.440000] UDP-Lite hash table entries: 256 (order: 1, 14336 bytes, linear)
[ 0.440000] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.450000] PCI: CLS 0 bytes, default 32
[ 0.450000] gptu: totally 6 16-bit timers/counters
[ 0.460000] gptu: misc_register on minor 256
[ 0.460000] gptu: succeeded to request irq 126
[ 0.470000] gptu: succeeded to request irq 127
[ 0.470000] gptu: succeeded to request irq 128
[ 0.480000] gptu: succeeded to request irq 129
[ 0.480000] gptu: succeeded to request irq 130
[ 0.490000] gptu: succeeded to request irq 131
[ 0.490000] No VPEs reserved for AP/SP, not initialize VPE loader
[ 0.490000] Pass maxvpes=<n> argument as kernel argument
[ 0.500000] No TCs reserved for AP/SP, not initializing RTLX.
[ 0.500000] Pass maxtcs=<n> argument as kernel argument
[ 0.520000] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.530000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.540000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.560000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[ 0.570000] printk: legacy console [ttyLTQ0] enabled
[ 0.570000] printk: legacy console [ttyLTQ0] enabled
[ 0.580000] printk: legacy bootconsole [early0] disabled
[ 0.580000] printk: legacy bootconsole [early0] disabled
[ 0.600000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
[ 0.600000] nand: Micron MT29F4G08ABADAWP
[ 0.600000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.610000] Scanning device for bad blocks
[ 0.670000] Bad eraseblock 660 at 0x000005280000
[ 0.670000] Bad eraseblock 692 at 0x000005680000
[ 0.910000] 2 fixed-partitions partitions found on MTD device 14000000.nand
[ 0.920000] Creating 2 MTD partitions on "14000000.nand":
[ 0.920000] 0x000000000000-0x000000400000 : "kernel"
[ 0.930000] 0x000000400000-0x000020000000 : "ubi"
[ 0.950000] spi-lantiq-ssc 1e100800.spi: Lantiq SSC SPI controller (Rev 8, TXFS 8, RXFS 8, DMA 1)
[ 0.960000] spi-nor spi0.4: supply vcc not found, using dummy regulator
[ 0.970000] 3 fixed-partitions partitions found on MTD device spi0.4
[ 0.970000] Creating 3 MTD partitions on "spi0.4":
[ 0.980000] 0x000000000000-0x000000040000 : "urlader"
[ 0.980000] 0x000000040000-0x0000000a0000 : "tffs (1)"
[ 0.990000] 0x0000000a0000-0x000000100000 : "tffs (2)"
[ 1.010000] NET: Registered PF_INET6 protocol family
[ 1.030000] Segment Routing with IPv6
[ 1.030000] In-situ OAM (IOAM) with IPv6
[ 1.040000] NET: Registered PF_PACKET protocol family
[ 1.040000] 8021q: 802.1Q VLAN Support v1.8
[ 1.110000] pcie-xrx200 1d900000.pcie: switch pcie endianess requested
[ 1.260000] PCI host bridge to bus 0000:00
[ 1.260000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[ 1.270000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
[ 1.270000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.280000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
[ 1.300000] pci 0000:00:00.0: 0x80848e10 took 17155 usecs
[ 1.300000] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060400 PCIe Root Port
[ 1.310000] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.310000] pci 0000:00:00.0: bridge window [io 0x1d800000-0x1d8fffff]
[ 1.320000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cffffff]
[ 1.330000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1cffffff pref]
[ 1.340000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.340000] pci 0000:01:00.0: [1912:0015] type 00 class 0x0c0330 PCIe Endpoint
[ 1.350000] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00001fff 64bit]
[ 1.360000] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.360000] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 1.380000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.380000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 1.390000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]: assigned
[ 1.400000] pci 0000:01:00.0: BAR 0 [mem 0x1c000000-0x1c001fff 64bit]: assigned
[ 1.400000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.410000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]
[ 1.420000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[ 1.420000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[ 1.430000] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.440000] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 7.190000] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[ 7.190000] pci 0000:01:00.0: 0x805ad224 took 5623393 usecs
[ 7.200000] UBI: auto-attach mtd1
[ 7.200000] ubi0: attaching mtd1
[ 8.880000] ubi0: scanning is finished
[ 8.900000] ubi0: attached mtd1 (name "ubi", size 508 MiB)
[ 8.910000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 8.910000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 8.920000] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[ 8.930000] ubi0: good PEBs: 4062, bad PEBs: 2, corrupted PEBs: 0
[ 8.930000] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 8.940000] ubi0: max/mean erase counter: 14/6, WL threshold: 4096, image sequence number: 699232088
[ 8.950000] ubi0: available PEBs: 0, total reserved PEBs: 4062, PEBs reserved for bad PEB handling: 78
[ 8.960000] ubi0: background thread "ubi_bgt0d" started, PID 308
[ 8.960000] block ubiblock0_0: created from ubi0:0(rootfs)
[ 8.970000] ubiblock: device ubiblock0_0 (rootfs) set to be root files[ 8.980000] check access for rdinit=/init failed: -2, ignoring
[ 8.990000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 9.000000] Freeing unused kernel image (initmem) memory: 1284K
[ 9.000000] This architecture does not have kernel memory protection.
[ 9.010000] Run /sbin/init as init process
[ 10.410000] init: Console is alive
[ 10.410000] init: - watchdog -
[ 11.360000] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 11.630000] SCSI subsystem initialized
[ 11.660000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 11.660000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 11.670000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 11.680000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 12.120000] xhci-pci-renesas 0000:01:00.0: xHCI Host Controller
[ 12.120000] xhci-pci-renesas 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 12.140000] xhci-pci-renesas 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000000100000090
[ 12.140000] xhci-pci-renesas 0000:01:00.0: xHCI Host Controller
[ 12.150000] xhci-pci-renesas 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 12.160000] xhci-pci-renesas 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 12.170000] hub 1-0:1.0: USB hub found
[ 12.170000] hub 1-0:1.0: 2 ports detected
[ 12.180000] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 12.190000] hub 2-0:1.0: USB hub found
[ 12.190000] hub 2-0:1.0: 2 ports detected
[ 12.210000] usbcore: registered new interface driver usb-storage
[ 12.210000] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 12.230000] init: - preinit -
[ 13.300000] usb 2-2: new SuperSpeed USB device number 2 using xhci-pci-renesas
[ 15.550000] random: crng init done
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 23.110000] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 23.130000] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 480
[ 23.250000] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 23.260000] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 23.270000] UBIFS (ubi0:1): FS size: 452616192 bytes (431 MiB, 3508 LEBs), max 3523 LEBs, journal size 22708224 bytes (21 MiB, 176 LEBs)
[ 23.280000] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 23.290000] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 73BD5097-CAE2-483C-BF22-9C84AB2132D1, small LPT model
[ 23.300000] mount_root: overlay filesystem has not been fully initialized yet
[ 23.310000] mount_root: switching to ubifs overlay
- config restore -
[ 24.320000] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 24.460000] procd: - early -
[ 24.460000] procd: - watchdog -
[ 25.290000] procd: - watchdog -
[ 25.290000] procd: - ubus -
[ 25.500000] procd: - init -
Please press Enter to activate this console.
[ 27.890000] kmodloader: loading kernel modules from /etc/modules.d/*
[ 30.110000] urngd: v1.0.2 started.
[ 30.210000] gswip 1e108000.switch: configuring for fixed/internal link mode
[ 30.210000] gswip 1e108000.switch: Link is Up - 1Gbps/Full - flow control off
[ 30.290000] gswip 1e108000.switch lan3 (uninitialized): PHY [1e108000.switch-mii:00] driver [Qualcomm Atheros AR8035] (irq=POLL)
[ 30.400000] gswip 1e108000.switch lan4 (uninitialized): PHY [1e108000.switch-mii:01] driver [Qualcomm Atheros AR8035] (irq=POLL)
[ 30.430000] gswip 1e108000.switch lan2 (uninitialized): PHY [1e108000.switch-mii:11] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
[ 30.460000] gswip 1e108000.switch lan1 (uninitialized): PHY [1e108000.switch-mii:13] driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (irq=POLL)
[ 30.480000] lantiq,xrx200-net 1e10b308.eth eth0: entered promiscuous mode
[ 30.490000] DSA: tree 0 setup
[ 30.490000] gswip 1e108000.switch: probed GSWIP version 21 mod 0
[ 30.520000] GACT probability on
[ 30.540000] Mirror/redirect action on
[ 30.590000] u32 classifier
[ 30.590000] input device check on
[ 30.590000] Actions configured
[ 30.690000] mdio_netlink: loading out-of-tree module taints kernel.
[ 30.750000] usbcore: registered new device driver r8152-cfgselector
[ 30.940000] r8152-cfgselector 2-2: reset SuperSpeed USB device number 2 using xhci-pci-renesas
[ 31.280000] r8152 2-2:1.0 eth1: v1.12.13
[ 31.280000] usbcore: registered new interface driver r8152
[ 31.320000] usbcore: registered new interface driver rtl8150
[ 31.360000] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 43.870000] br-lan: port 1(eth1) entered blocking state
[ 43.870000] br-lan: port 1(eth1) entered disabled state
[ 43.880000] r8152 2-2:1.0 eth1: entered allmulticast mode
[ 43.890000] r8152 2-2:1.0 eth1: entered promiscuous mode
[ 43.910000] br-lan: port 1(eth1) entered blocking state
[ 43.910000] br-lan: port 1(eth1) entered forwarding state
[ 44.800000] br-lan: port 1(eth1) entered disabled state
[ 47.480000] r8152 2-2:1.0 eth1: Promiscuous mode enabled
[ 47.490000] r8152 2-2:1.0 eth1: carrier on
[ 47.500000] br-lan: port 1(eth1) entered blocking state
[ 47.500000] br-lan: port 1(eth1) entered forwarding state
BusyBox v1.37.0 (2025-09-04 23:19:13 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r30959+10-b4294bc980
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
OpenWrt recently switched to the "apk" package manager!
OPKG Command APK Equivalent Description
------------------------------------------------------------------
opkg install <pkg> apk add <pkg> Install a package
opkg remove <pkg> apk del <pkg> Remove a package
opkg upgrade apk upgrade Upgrade all packages
opkg files <pkg> apk info -L <pkg> List package contents
opkg list-installed apk info List installed packages
opkg update apk update Update package lists
opkg search <pkg> apk search <pkg> Search for packages
------------------------------------------------------------------
For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet
root@OpenWrt:~# cd /selftests/drivers/net/dsa
root@OpenWrt:/selftests/drivers/net/dsa# ./local_termination.sh lan1 lan2 lan3 lan4
[ 79.760000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 79.800000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 81.930000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 82.880000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 88.350000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 88.840000] gswip 1e108000.switch lan1: Link is Down
[ 88.850000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 89.180000] gswip 1e108000.switch lan2: left promiscuous mode
[ 89.180000] gswip 1e108000.switch lan2: Link is Down
[ 89.200000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 89.380000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 92.000000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 92.320000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 111.950000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 111.950000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 117.530000] gswip 1e108000.switch lan2: left allmulticast mode
[ 117.540000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
TEST: lan2: Unicast IPv4 to primary MAC address [ OK ]
TEST: lan2: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: lan2: Multicast IPv4 to joined group [ OK ]
TEST: lan2: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: lan2: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: lan2: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: lan2: Multicast IPv6 to joined group [ OK ]
TEST: lan2: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: lan2: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: lan2: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: lan2: 1588v2 over L2 transport, Sync [ OK ]
TEST: lan2: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: lan2: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: lan2: 1588v2 over IPv4, Sync [ OK ]
TEST: lan2: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: lan2: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: lan2: 1588v2 over IPv6, Sync [ OK ]
TEST: lan2: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: lan2: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 129.120000] gswip 1e108000.switch lan2: left promiscuous mode
[ 129.150000] gswip 1e108000.switch lan2: Link is Down
[ 129.450000] gswip 1e108000.switch lan1: Link is Down
[ 129.990000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 130.200000] br0: port 1(lan2) entered blocking state
[ 130.200000] br0: port 1(lan2) entered disabled state
[ 130.210000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 130.210000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 130.240000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 130.330000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 130.740000] br0: entered promiscuous mode
[ 133.130000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 133.450000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 133.450000] br0: port 1(lan2) entered blocking state
[ 133.460000] br0: port 1(lan2) entered forwarding state
[ 152.670000] br0: entered allmulticast mode
[ 158.310000] br0: left allmulticast mode
TEST: vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to joined group [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to joined group [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 162.080000] br0: left promiscuous mode
[ 162.230000] br0: port 1(lan2) entered disabled state
[ 162.480000] gswip 1e108000.switch lan2: left allmulticast mode
[ 162.480000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 162.490000] gswip 1e108000.switch lan2: left promiscuous mode
[ 162.500000] br0: port 1(lan2) entered disabled state
[ 162.710000] gswip 1e108000.switch lan1: Link is Down
[ 163.270000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 163.470000] br0: port 1(lan2) entered blocking state
[ 163.470000] br0: port 1(lan2) entered disabled state
[ 163.480000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 163.480000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 163.500000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 163.510000] br0: port 1(lan2) entered blocking state
[ 163.510000] br0: port 1(lan2) entered forwarding state
[ 163.610000] gswip 1e108000.switch lan2: Link is Down
[ 163.610000] br0: port 1(lan2) entered disabled state
[ 164.040000] br0: entered promiscuous mode
[ 165.770000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 165.770000] br0: port 1(lan2) entered blocking state
[ 165.780000] br0: port 1(lan2) entered forwarding state
[ 166.400000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 185.600000] br0: entered allmulticast mode
[ 191.200000] br0: left allmulticast mode
TEST: vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to joined group [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to joined group [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 195.050000] br0: left promiscuous mode
[ 195.220000] br0: port 1(lan2) entered disabled state
[ 195.480000] gswip 1e108000.switch lan2: left allmulticast mode
[ 195.480000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 195.490000] gswip 1e108000.switch lan2: left promiscuous mode
[ 195.490000] br0: port 1(lan2) entered disabled state
[ 195.700000] gswip 1e108000.switch lan1: Link is Down
[ 195.920000] gswip 1e108000.switch lan2: Link is Down
[ 196.260000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 196.790000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 197.240000] gswip 1e108000.switch lan2: left promiscuous mode
[ 197.260000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 197.650000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 199.370000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 199.930000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 215.040000] lan2.100: entered promiscuous mode
[ 220.640000] lan2.100: left promiscuous mode
[ 223.610000] lan2.100: entered allmulticast mode
[ 223.610000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 223.610000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 229.200000] lan2.100: left allmulticast mode
[ 229.200000] gswip 1e108000.switch lan2: left allmulticast mode
[ 229.200000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
TEST: VLAN upper: Unicast IPv4 to primary MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to macvlan MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, promisc [FAIL]
reception failed
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to joined group [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to unknown group [ OK ]
TEST: VLAN upper: Multicast IPv4 to unknown group, promisc [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv4 to unknown group, allmulti [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to joined group [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to unknown group [ OK ]
TEST: VLAN upper: Multicast IPv6 to unknown group, promisc [FAIL]
reception failed
TEST: VLAN upper: Multicast IPv6 to unknown group, allmulti [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Peer Delay Request [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv4, Peer Delay Request [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Sync [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Follow-Up [FAIL]
reception failed
TEST: VLAN upper: 1588v2 over IPv6, Peer Delay Request [FAIL]
reception failed
[ 239.910000] gswip 1e108000.switch lan2: left promiscuous mode
[ 240.020000] gswip 1e108000.switch lan2: Link is Down
[ 240.400000] gswip 1e108000.switch lan1: Link is Down
[ 240.860000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 241.000000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 241.510000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 241.960000] gswip 1e108000.switch lan2: left promiscuous mode
[ 241.980000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 241.990000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 242.430000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 242.470000] br0: port 1(lan2) entered blocking state
[ 242.470000] br0: port 1(lan2) entered disabled state
[ 242.470000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 242.480000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 244.650000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 245.610000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 245.610000] br0: port 1(lan2) entered blocking state
[ 245.620000] br0: port 1(lan2) entered forwarding state
[ 256.480000] lan2.100: entered promiscuous mode
[ 262.080000] lan2.100: left promiscuous mode
[ 265.090000] lan2.100: entered allmulticast mode
[ 270.690000] lan2.100: left allmulticast mode
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Sync [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 282.120000] gswip 1e108000.switch lan2: left allmulticast mode
[ 282.120000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 282.130000] br0: port 1(lan2) entered disabled state
[ 282.400000] gswip 1e108000.switch lan2: Link is Down
[ 282.770000] gswip 1e108000.switch lan1: Link is Down
[ 283.220000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 283.890000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 284.330000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 284.790000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 284.790000] br0: port 1(lan2) entered blocking state
[ 284.800000] br0: port 1(lan2) entered disabled state
[ 284.800000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 284.810000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 286.970000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 286.970000] br0: port 1(lan2) entered blocking state
[ 286.980000] br0: port 1(lan2) entered forwarding state
[ 288.090000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 298.640000] lan2.100: entered promiscuous mode
[ 304.250000] lan2.100: left promiscuous mode
[ 307.260000] lan2.100: entered allmulticast mode
[ 312.880000] lan2.100: left allmulticast mode
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Peer Delay Request [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Sync [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Follow-Up [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Peer Delay Request [ OK ]
[ 324.810000] gswip 1e108000.switch lan2: left allmulticast mode
[ 324.810000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 324.820000] br0: port 1(lan2) entered disabled state
[ 324.850000] gswip 1e108000.switch: bridge to leave does not exists
[ 324.860000] gswip 1e108000.switch: port 2 failed to reset VLAN filtering to 0: -ENOENT
[ 324.990000] gswip 1e108000.switch: bridge to leave does not exists
[ 324.990000] gswip 1e108000.switch lan2: failed to kill vid 8100/100
[ 325.110000] gswip 1e108000.switch lan2: Link is Down
[ 325.510000] gswip 1e108000.switch lan1: Link is Down
[ 326.070000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 326.440000] br0: port 1(lan2) entered blocking state
[ 326.450000] br0: port 1(lan2) entered disabled state
[ 326.450000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 326.460000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 326.550000] gswip 1e108000.switch lan2: configuring for phy/internal link mode
[ 327.160000] br0: entered promiscuous mode
[ 328.650000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 328.650000] br0: port 1(lan2) entered blocking state
[ 328.660000] br0: port 1(lan2) entered forwarding state
[ 329.200000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 340.530000] br0.100: entered promiscuous mode
[ 346.160000] br0.100: left promiscuous mode
[ 349.150000] br0.100: entered allmulticast mode
[ 349.150000] br0: entered allmulticast mode
[ 354.790000] br0.100: left allmulticast mode
[ 354.790000] br0: left allmulticast mode
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 358.590000] br0: left promiscuous mode
[ 358.810000] br0: port 1(lan2) entered disabled state
[ 359.070000] gswip 1e108000.switch lan2: left allmulticast mode
[ 359.080000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 359.080000] br0: port 1(lan2) entered disabled state
[ 359.370000] gswip 1e108000.switch lan1: Link is Down
[ 359.850000] gswip 1e108000.switch lan2: Link is Down
[ 359.950000] gswip 1e108000.switch lan1: configuring for phy/internal link mode
[ 360.330000] br0: port 1(lan2) entered blocking state
[ 360.330000] br0: port 1(lan2) entered disabled state
[ 360.330000] gswip 1e108000.switch lan2: entered allmulticast mode
[ 360.340000] lantiq,xrx200-net 1e10b308.eth eth0: entered allmulticast mode
[ 361.070000] br0: entered promiscuous mode
[ 362.080000] gswip 1e108000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 362.970000] gswip 1e108000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 362.970000] br0: port 1(lan2) entered blocking state
[ 362.980000] br0: port 1(lan2) entered forwarding state
[ 373.550000] br0.100: entered promiscuous mode
[ 379.140000] br0.100: left promiscuous mode
[ 382.140000] br0.100: entered allmulticast mode
[ 382.140000] br0: entered allmulticast mode
[ 387.780000] br0.100: left allmulticast mode
[ 387.780000] br0: left allmulticast mode
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to joined group [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group [XFAIL]
reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti [ OK ]
[ 391.710000] br0: left promiscuous mode
[ 391.930000] br0: port 1(lan2) entered disabled state
[ 392.200000] gswip 1e108000.switch lan2: left allmulticast mode
[ 392.200000] lantiq,xrx200-net 1e10b308.eth eth0: left allmulticast mode
[ 392.210000] br0: port 1(lan2) entered disabled state
[ 392.480000] gswip 1e108000.switch lan1: Link is Down
[ 392.840000] gswip 1e108000.switch lan2: Link is Down
root@OpenWrt:/selftests/drivers/net/dsa#
next prev parent reply other threads:[~2025-09-20 1:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-18 7:21 [PATCH net 0/2] lantiq_gswip fixes Vladimir Oltean
2025-09-18 7:21 ` [PATCH net 1/2] net: dsa: lantiq_gswip: move gswip_add_single_port_br() call to port_setup() Vladimir Oltean
2025-09-18 7:21 ` [PATCH net 2/2] net: dsa: lantiq_gswip: suppress -EINVAL errors for bridge FDB entries added to the CPU port Vladimir Oltean
2025-09-19 23:50 ` [PATCH net 0/2] lantiq_gswip fixes Jakub Kicinski
2025-09-20 1:07 ` Daniel Golle [this message]
2025-09-22 11:07 ` Vladimir Oltean
2025-09-22 18:34 ` Jakub Kicinski
2025-09-24 4:18 ` Daniel Golle
2025-09-25 7:35 ` Paolo Abeni
2025-09-25 8:14 ` Vladimir Oltean
2025-09-25 8:27 ` Paolo Abeni
2025-09-25 8:50 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aM3-Tf9kHkNP2XRN@pidgin.makrotopia.org \
--to=daniel@makrotopia.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hauke@hauke-m.de \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.