[PATCH v3 00/11] remoteproc: imx_dsp_rproc: Refactor to use new ops and remove switch-case logic

[PATCH v3 00/11] remoteproc: imx_dsp_rproc: Refactor to use new ops and remove switch-case logic

[Peng Fan (OSS)]

This patchset aligns imx_dsp_rproc with the cleanup and modernization
previously applied to imx_rproc.c. The goal is to simplify the driver by
transitioning to the new ops-based method, eliminating the legacy
switch-case logic for a cleaner and more maintainable design.

Patches 1–5: General cleanup, including code simplification and adoption
             of the devres API.
Patches 6–10: Transition to the new ops-based approach, removing the
              switch-case structure.
Patch 11: Remove the obsolete enum imx_rproc_method.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
Changes in v3:
- Collected R-b
- Simplify commit log for patch 4 per Frank.
- Link to V2: https://lore.kernel.org/all/20251106-imx-dsp-2025-11-06-v1-0-46028bc3459a@nxp.com/

Changes in v2:
- Collected R-b
- Patch 3: Update commit per Frank/Daniel
- patch 8: Use priv->dsp_dcfg->dcfg to avoid adding "const struct imx_rproc_dsp_dcfg *dsp_dcfg"
- Link to v1: https://lore.kernel.org/linux-remoteproc/CAEnQRZAOTFw=sBppHTYQAdfDBuNqkqk6gVO4FyP0EBsva3Oi+Q@mail.gmail.com/T/#m27c93af9fb1e7fdeb0766bdbffbaae39d79eefab

---
Peng Fan (11):
      remoteproc: imx_dsp_rproc: simplify power domain attach and error handling
      remoteproc: imx_dsp_rproc: Use devm_rproc_add() helper
      remoteproc: imx_dsp_rproc: Use devm_pm_runtime_enable() helper
      remoteproc: imx_dsp_rproc: Use dev_err_probe() for firmware and mode errors
      remoteproc: imx_dsp_rproc: Drop extra space
      remoteproc: imx_dsp_rproc: Use start/stop/detect_mode ops from imx_rproc_dcfg
      remoteproc: imx_dsp_rproc: Move imx_dsp_rproc_dcfg closer to imx_dsp_rproc_of_match
      remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_MMIO switch case
      remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_SCU_API switch case
      remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_RESET_CONTROLLER switch case
      remoteproc: imx_rproc: Remove enum imx_rproc_method

 drivers/remoteproc/imx_dsp_rproc.c | 342 ++++++++++++++++++++-----------------
 drivers/remoteproc/imx_rproc.h     |  14 --
 2 files changed, 182 insertions(+), 174 deletions(-)
---
base-commit: ab40c92c74c6b0c611c89516794502b3a3173966
change-id: 20251111-imx-dsp-2025-11-11-1b0957e4cf5c

Best regards,
-- 
Peng Fan <peng.fan@nxp.com>

[PATCH v3 01/11] remoteproc: imx_dsp_rproc: simplify power domain attach and error handling

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Refactor imx_dsp_attach_pm_domains() to use devm_pm_domain_attach_list()
directly, removing manual detach logic and simplifying resource management.

Also replace verbose error handling in imx_dsp_rproc_probe() with
dev_err_probe() for cleaner and more consistent error reporting.

No functional changes.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 29 ++++++++---------------------
 1 file changed, 8 insertions(+), 21 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index 6e78a01755c7bdc28cd93f00fe6f74affc3d96b0..c466363debbebe8f91b908b3bffaa32e9bf8b9a6 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -1062,14 +1062,12 @@ static const struct rproc_ops imx_dsp_rproc_ops = {
 static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
 {
 	struct device *dev = priv->rproc->dev.parent;
-	int ret;
 
 	/* A single PM domain is already attached. */
 	if (dev->pm_domain)
 		return 0;
 
-	ret = dev_pm_domain_attach_list(dev, NULL, &priv->pd_list);
-	return ret < 0 ? ret : 0;
+	return devm_pm_domain_attach_list(dev, NULL, &priv->pd_list);
 }
 
 /**
@@ -1186,35 +1184,25 @@ static int imx_dsp_rproc_probe(struct platform_device *pdev)
 
 	/* There are multiple power domains required by DSP on some platform */
 	ret = imx_dsp_attach_pm_domains(priv);
-	if (ret) {
-		dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "failed on imx_dsp_attach_pm_domains\n");
+
 	/* Get clocks */
 	ret = imx_dsp_rproc_clk_get(priv);
-	if (ret) {
-		dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
-		goto err_detach_domains;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed on imx_dsp_rproc_clk_get\n");
 
 	init_completion(&priv->pm_comp);
 	rproc->auto_boot = false;
 	ret = rproc_add(rproc);
-	if (ret) {
-		dev_err(dev, "rproc_add failed\n");
-		goto err_detach_domains;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "rproc_add failed\n");
 
 	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_XTENSA);
 
 	pm_runtime_enable(dev);
 
 	return 0;
-
-err_detach_domains:
-	dev_pm_domain_detach_list(priv->pd_list);
-
-	return ret;
 }
 
 static void imx_dsp_rproc_remove(struct platform_device *pdev)
@@ -1224,7 +1212,6 @@ static void imx_dsp_rproc_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 	rproc_del(rproc);
-	dev_pm_domain_detach_list(priv->pd_list);
 }
 
 /* pm runtime functions */

-- 
2.37.1

[PATCH v3 02/11] remoteproc: imx_dsp_rproc: Use devm_rproc_add() helper

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Replace manual rproc_add() and cleanup logic with devm_rproc_add(), which
ties the remoteproc lifecycle to the device's lifecycle. This simplifies
error handling and ensures proper cleanup.

No functional changes.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index c466363debbebe8f91b908b3bffaa32e9bf8b9a6..df6a4126538d22ff6e02145edb5ac13c2d72c949 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -1194,7 +1194,7 @@ static int imx_dsp_rproc_probe(struct platform_device *pdev)
 
 	init_completion(&priv->pm_comp);
 	rproc->auto_boot = false;
-	ret = rproc_add(rproc);
+	ret = devm_rproc_add(dev, rproc);
 	if (ret)
 		return dev_err_probe(dev, ret, "rproc_add failed\n");
 
@@ -1211,7 +1211,6 @@ static void imx_dsp_rproc_remove(struct platform_device *pdev)
 	struct imx_dsp_rproc *priv = rproc->priv;
 
 	pm_runtime_disable(&pdev->dev);
-	rproc_del(rproc);
 }
 
 /* pm runtime functions */

-- 
2.37.1

[PATCH v3 03/11] remoteproc: imx_dsp_rproc: Use devm_pm_runtime_enable() helper

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Current code on the cleanup path just disables runtime PM for a device.

Using resource managed version devm_pm_runtime_enable() registers a cleanup
callback that sets autosuspend to false and then disables runtime PM for
a device. So, basically the same functionality as we don't use autosuspend
anyway.

As a result, the .remove callback is no longer needed, reducing boilerplate
code.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index df6a4126538d22ff6e02145edb5ac13c2d72c949..f5d0aec52c56664d6074272e276edb0c4175c9ea 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -1200,17 +1200,7 @@ static int imx_dsp_rproc_probe(struct platform_device *pdev)
 
 	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_XTENSA);
 
-	pm_runtime_enable(dev);
-
-	return 0;
-}
-
-static void imx_dsp_rproc_remove(struct platform_device *pdev)
-{
-	struct rproc *rproc = platform_get_drvdata(pdev);
-	struct imx_dsp_rproc *priv = rproc->priv;
-
-	pm_runtime_disable(&pdev->dev);
+	return devm_pm_runtime_enable(dev);
 }
 
 /* pm runtime functions */
@@ -1361,7 +1351,6 @@ MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
 
 static struct platform_driver imx_dsp_rproc_driver = {
 	.probe = imx_dsp_rproc_probe,
-	.remove = imx_dsp_rproc_remove,
 	.driver = {
 		.name = "imx-dsp-rproc",
 		.of_match_table = imx_dsp_rproc_of_match,

-- 
2.37.1

[PATCH v3 04/11] remoteproc: imx_dsp_rproc: Use dev_err_probe() for firmware and mode errors

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Use dev_err_probe() to simplify the code. No functional change.

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index f5d0aec52c56664d6074272e276edb0c4175c9ea..87f4a026c05fbf1c9371058290b2d33cb94b9e54 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -1150,11 +1150,8 @@ static int imx_dsp_rproc_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	ret = rproc_of_parse_firmware(dev, 0, &fw_name);
-	if (ret) {
-		dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
-			ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to parse firmware-name property\n");
 
 	rproc = devm_rproc_alloc(dev, "imx-dsp-rproc", &imx_dsp_rproc_ops,
 				 fw_name, sizeof(*priv));
@@ -1177,10 +1174,8 @@ static int imx_dsp_rproc_probe(struct platform_device *pdev)
 	INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
 
 	ret = imx_dsp_rproc_detect_mode(priv);
-	if (ret) {
-		dev_err(dev, "failed on imx_dsp_rproc_detect_mode\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed on imx_dsp_rproc_detect_mode\n");
 
 	/* There are multiple power domains required by DSP on some platform */
 	ret = imx_dsp_attach_pm_domains(priv);

-- 
2.37.1

[PATCH v3 05/11] remoteproc: imx_dsp_rproc: Drop extra space

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Drop extra space between return and zero.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index 87f4a026c05fbf1c9371058290b2d33cb94b9e54..1726aaa1eafb9ac1a913e3e2caea73801b86dc09 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -784,7 +784,7 @@ static int imx_dsp_rproc_prepare(struct rproc *rproc)
 
 	pm_runtime_get_sync(dev);
 
-	return  0;
+	return 0;
 }
 
 /* Unprepare function for rproc_ops */
@@ -792,7 +792,7 @@ static int imx_dsp_rproc_unprepare(struct rproc *rproc)
 {
 	pm_runtime_put_sync(rproc->dev.parent);
 
-	return  0;
+	return 0;
 }
 
 /* Kick function for rproc_ops */

-- 
2.37.1

[PATCH v3 06/11] remoteproc: imx_dsp_rproc: Use start/stop/detect_mode ops from imx_rproc_dcfg

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Allow each platform to provide its own implementation of start/stop/
detect_mode operations, and prepare to eliminate the need for multiple
switch-case statements.

Improve code readability and maintainability by encapsulating
platform-specific behavior.

No functional changes.

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index 1726aaa1eafb9ac1a913e3e2caea73801b86dc09..833b1bd4019614157f0bedf09bd348caab802eef 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -404,6 +404,11 @@ static int imx_dsp_rproc_start(struct rproc *rproc)
 	struct device *dev = rproc->dev.parent;
 	int ret;
 
+	if (dcfg->ops && dcfg->ops->start) {
+		ret = dcfg->ops->start(rproc);
+		goto start_ret;
+	}
+
 	switch (dcfg->method) {
 	case IMX_RPROC_MMIO:
 		ret = regmap_update_bits(priv->regmap,
@@ -424,6 +429,7 @@ static int imx_dsp_rproc_start(struct rproc *rproc)
 		return -EOPNOTSUPP;
 	}
 
+start_ret:
 	if (ret)
 		dev_err(dev, "Failed to enable remote core!\n");
 	else if (priv->flags & WAIT_FW_READY)
@@ -449,6 +455,11 @@ static int imx_dsp_rproc_stop(struct rproc *rproc)
 		return 0;
 	}
 
+	if (dcfg->ops && dcfg->ops->stop) {
+		ret = dcfg->ops->stop(rproc);
+		goto stop_ret;
+	}
+
 	switch (dcfg->method) {
 	case IMX_RPROC_MMIO:
 		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
@@ -467,6 +478,7 @@ static int imx_dsp_rproc_stop(struct rproc *rproc)
 		return -EOPNOTSUPP;
 	}
 
+stop_ret:
 	if (ret)
 		dev_err(dev, "Failed to stop remote core\n");
 	else
@@ -1085,10 +1097,14 @@ static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
 static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
 {
 	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+	const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
 	struct device *dev = priv->rproc->dev.parent;
 	struct regmap *regmap;
 	int ret = 0;
 
+	if (dcfg->ops && dcfg->ops->detect_mode)
+		return dcfg->ops->detect_mode(priv->rproc);
+
 	switch (dsp_dcfg->dcfg->method) {
 	case IMX_RPROC_SCU_API:
 		ret = imx_scu_get_handle(&priv->ipc_handle);

-- 
2.37.1

[PATCH v3 07/11] remoteproc: imx_dsp_rproc: Move imx_dsp_rproc_dcfg closer to imx_dsp_rproc_of_match

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Move the imx_dsp_rproc_dcfg structure definitions closer to
imx_dsp_rproc_of_match to prepare for adding start/stop/detect_mode ops for
each i.MX variant.

Avoids the need to declare function prototypes such as
'static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)' at the
beginning of the file, improving code organization and readability.

No functional changes.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 100 ++++++++++++++++++-------------------
 1 file changed, 50 insertions(+), 50 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index 833b1bd4019614157f0bedf09bd348caab802eef..f28d25cab3f1d89e5cde37a04b528870a59abeed 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -261,56 +261,6 @@ static int imx8ulp_dsp_reset(struct imx_dsp_rproc *priv)
 	return 0;
 }
 
-/* Specific configuration for i.MX8MP */
-static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8mp = {
-	.att		= imx_dsp_rproc_att_imx8mp,
-	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
-	.method		= IMX_RPROC_RESET_CONTROLLER,
-};
-
-static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
-	.dcfg		= &dsp_rproc_cfg_imx8mp,
-	.reset          = imx8mp_dsp_reset,
-};
-
-/* Specific configuration for i.MX8ULP */
-static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8ulp = {
-	.src_reg	= IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
-	.src_mask	= IMX8ULP_SYSCTRL0_DSP_STALL,
-	.src_start	= 0,
-	.src_stop	= IMX8ULP_SYSCTRL0_DSP_STALL,
-	.att		= imx_dsp_rproc_att_imx8ulp,
-	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
-	.method		= IMX_RPROC_MMIO,
-};
-
-static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
-	.dcfg		= &dsp_rproc_cfg_imx8ulp,
-	.reset          = imx8ulp_dsp_reset,
-};
-
-/* Specific configuration for i.MX8QXP */
-static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qxp = {
-	.att		= imx_dsp_rproc_att_imx8qxp,
-	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
-	.method		= IMX_RPROC_SCU_API,
-};
-
-static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
-	.dcfg		= &dsp_rproc_cfg_imx8qxp,
-};
-
-/* Specific configuration for i.MX8QM */
-static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qm = {
-	.att		= imx_dsp_rproc_att_imx8qm,
-	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
-	.method		= IMX_RPROC_SCU_API,
-};
-
-static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
-	.dcfg		= &dsp_rproc_cfg_imx8qm,
-};
-
 static int imx_dsp_rproc_ready(struct rproc *rproc)
 {
 	struct imx_dsp_rproc *priv = rproc->priv;
@@ -1351,6 +1301,56 @@ static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
 	RUNTIME_PM_OPS(imx_dsp_runtime_suspend, imx_dsp_runtime_resume, NULL)
 };
 
+/* Specific configuration for i.MX8MP */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8mp = {
+	.att		= imx_dsp_rproc_att_imx8mp,
+	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
+	.method		= IMX_RPROC_RESET_CONTROLLER,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
+	.dcfg		= &dsp_rproc_cfg_imx8mp,
+	.reset          = imx8mp_dsp_reset,
+};
+
+/* Specific configuration for i.MX8ULP */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8ulp = {
+	.src_reg	= IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+	.src_mask	= IMX8ULP_SYSCTRL0_DSP_STALL,
+	.src_start	= 0,
+	.src_stop	= IMX8ULP_SYSCTRL0_DSP_STALL,
+	.att		= imx_dsp_rproc_att_imx8ulp,
+	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
+	.method		= IMX_RPROC_MMIO,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
+	.dcfg		= &dsp_rproc_cfg_imx8ulp,
+	.reset          = imx8ulp_dsp_reset,
+};
+
+/* Specific configuration for i.MX8QXP */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qxp = {
+	.att		= imx_dsp_rproc_att_imx8qxp,
+	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
+	.method		= IMX_RPROC_SCU_API,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
+	.dcfg		= &dsp_rproc_cfg_imx8qxp,
+};
+
+/* Specific configuration for i.MX8QM */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qm = {
+	.att		= imx_dsp_rproc_att_imx8qm,
+	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
+	.method		= IMX_RPROC_SCU_API,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
+	.dcfg		= &dsp_rproc_cfg_imx8qm,
+};
+
 static const struct of_device_id imx_dsp_rproc_of_match[] = {
 	{ .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
 	{ .compatible = "fsl,imx8qm-hifi4",  .data = &imx_dsp_rproc_cfg_imx8qm },

-- 
2.37.1

[PATCH v3 08/11] remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_MMIO switch case

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Introduce imx_dsp_rproc_mmio_{start, stop, detect_mode}() helper functions
for i.MX variants using IMX_RPROC_MMIO to manage remote processors.

Allows the removal of the IMX_RPROC_MMIO switch-case blocks from
imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and more
maintainable code.

No functional changes.

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 61 +++++++++++++++++++++++++-------------
 drivers/remoteproc/imx_rproc.h     |  2 --
 2 files changed, 40 insertions(+), 23 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index f28d25cab3f1d89e5cde37a04b528870a59abeed..71776816c3508a86bf7b8a09ac45827a83a7bb3a 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -338,6 +338,14 @@ static int imx_dsp_rproc_handle_rsc(struct rproc *rproc, u32 rsc_type,
 	return RSC_HANDLED;
 }
 
+static int imx_dsp_rproc_mmio_start(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+	const struct imx_rproc_dcfg *dcfg = priv->dsp_dcfg->dcfg;
+
+	return regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask, dcfg->src_start);
+}
+
 /*
  * Start function for rproc_ops
  *
@@ -360,12 +368,6 @@ static int imx_dsp_rproc_start(struct rproc *rproc)
 	}
 
 	switch (dcfg->method) {
-	case IMX_RPROC_MMIO:
-		ret = regmap_update_bits(priv->regmap,
-					 dcfg->src_reg,
-					 dcfg->src_mask,
-					 dcfg->src_start);
-		break;
 	case IMX_RPROC_SCU_API:
 		ret = imx_sc_pm_cpu_start(priv->ipc_handle,
 					  IMX_SC_R_DSP,
@@ -388,6 +390,14 @@ static int imx_dsp_rproc_start(struct rproc *rproc)
 	return ret;
 }
 
+static int imx_dsp_rproc_mmio_stop(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+	const struct imx_rproc_dcfg *dcfg = priv->dsp_dcfg->dcfg;
+
+	return regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask, dcfg->src_stop);
+}
+
 /*
  * Stop function for rproc_ops
  * It clears the REMOTE_IS_READY flags
@@ -411,10 +421,6 @@ static int imx_dsp_rproc_stop(struct rproc *rproc)
 	}
 
 	switch (dcfg->method) {
-	case IMX_RPROC_MMIO:
-		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
-					 dcfg->src_stop);
-		break;
 	case IMX_RPROC_SCU_API:
 		ret = imx_sc_pm_cpu_start(priv->ipc_handle,
 					  IMX_SC_R_DSP,
@@ -1032,6 +1038,23 @@ static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
 	return devm_pm_domain_attach_list(dev, NULL, &priv->pd_list);
 }
 
+static int imx_dsp_rproc_mmio_detect_mode(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	struct regmap *regmap;
+
+	regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to find syscon\n");
+		return PTR_ERR(regmap);
+	}
+
+	priv->regmap = regmap;
+
+	return 0;
+}
+
 /**
  * imx_dsp_rproc_detect_mode() - detect DSP control mode
  * @priv: private data pointer
@@ -1049,7 +1072,6 @@ static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
 	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
 	const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
 	struct device *dev = priv->rproc->dev.parent;
-	struct regmap *regmap;
 	int ret = 0;
 
 	if (dcfg->ops && dcfg->ops->detect_mode)
@@ -1061,15 +1083,6 @@ static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
 		if (ret)
 			return ret;
 		break;
-	case IMX_RPROC_MMIO:
-		regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
-		if (IS_ERR(regmap)) {
-			dev_err(dev, "failed to find syscon\n");
-			return PTR_ERR(regmap);
-		}
-
-		priv->regmap = regmap;
-		break;
 	case IMX_RPROC_RESET_CONTROLLER:
 		priv->run_stall = devm_reset_control_get_exclusive(dev, "runstall");
 		if (IS_ERR(priv->run_stall)) {
@@ -1301,6 +1314,12 @@ static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
 	RUNTIME_PM_OPS(imx_dsp_runtime_suspend, imx_dsp_runtime_resume, NULL)
 };
 
+static const struct imx_rproc_plat_ops imx_dsp_rproc_ops_mmio = {
+	.start		= imx_dsp_rproc_mmio_start,
+	.stop		= imx_dsp_rproc_mmio_stop,
+	.detect_mode	= imx_dsp_rproc_mmio_detect_mode,
+};
+
 /* Specific configuration for i.MX8MP */
 static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8mp = {
 	.att		= imx_dsp_rproc_att_imx8mp,
@@ -1321,7 +1340,7 @@ static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8ulp = {
 	.src_stop	= IMX8ULP_SYSCTRL0_DSP_STALL,
 	.att		= imx_dsp_rproc_att_imx8ulp,
 	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
-	.method		= IMX_RPROC_MMIO,
+	.ops		= &imx_dsp_rproc_ops_mmio,
 };
 
 static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
index aeed08bdfb5619c7afd7201589f417cfd6745818..912827c39c0dedeed76c13740efd42a8e7cf9c45 100644
--- a/drivers/remoteproc/imx_rproc.h
+++ b/drivers/remoteproc/imx_rproc.h
@@ -18,8 +18,6 @@ struct imx_rproc_att {
 /* Remote core start/stop method */
 enum imx_rproc_method {
 	IMX_RPROC_NONE,
-	/* Through syscon regmap */
-	IMX_RPROC_MMIO,
 	/* Through ARM SMCCC */
 	IMX_RPROC_SMC,
 	/* Through System Control Unit API */

-- 
2.37.1

[PATCH v3 09/11] remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_SCU_API switch case

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Introduce imx_dsp_rproc_scu_api_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_SCU_API to manage remote
processors.

Allows the removal of the IMX_RPROC_SCU_API switch-case blocks from
imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and more
maintainable code.

No functional changes.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 48 +++++++++++++++++++++++---------------
 drivers/remoteproc/imx_rproc.h     |  2 --
 2 files changed, 29 insertions(+), 21 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index 71776816c3508a86bf7b8a09ac45827a83a7bb3a..91d041c15ac19f527f48c8189421f71fb7c9745e 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -346,6 +346,13 @@ static int imx_dsp_rproc_mmio_start(struct rproc *rproc)
 	return regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask, dcfg->src_start);
 }
 
+static int imx_dsp_rproc_scu_api_start(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+
+	return imx_sc_pm_cpu_start(priv->ipc_handle, IMX_SC_R_DSP, true, rproc->bootaddr);
+}
+
 /*
  * Start function for rproc_ops
  *
@@ -368,12 +375,6 @@ static int imx_dsp_rproc_start(struct rproc *rproc)
 	}
 
 	switch (dcfg->method) {
-	case IMX_RPROC_SCU_API:
-		ret = imx_sc_pm_cpu_start(priv->ipc_handle,
-					  IMX_SC_R_DSP,
-					  true,
-					  rproc->bootaddr);
-		break;
 	case IMX_RPROC_RESET_CONTROLLER:
 		ret = reset_control_deassert(priv->run_stall);
 		break;
@@ -398,6 +399,13 @@ static int imx_dsp_rproc_mmio_stop(struct rproc *rproc)
 	return regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask, dcfg->src_stop);
 }
 
+static int imx_dsp_rproc_scu_api_stop(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+
+	return imx_sc_pm_cpu_start(priv->ipc_handle, IMX_SC_R_DSP, false, rproc->bootaddr);
+}
+
 /*
  * Stop function for rproc_ops
  * It clears the REMOTE_IS_READY flags
@@ -421,12 +429,6 @@ static int imx_dsp_rproc_stop(struct rproc *rproc)
 	}
 
 	switch (dcfg->method) {
-	case IMX_RPROC_SCU_API:
-		ret = imx_sc_pm_cpu_start(priv->ipc_handle,
-					  IMX_SC_R_DSP,
-					  false,
-					  rproc->bootaddr);
-		break;
 	case IMX_RPROC_RESET_CONTROLLER:
 		ret = reset_control_assert(priv->run_stall);
 		break;
@@ -1055,6 +1057,13 @@ static int imx_dsp_rproc_mmio_detect_mode(struct rproc *rproc)
 	return 0;
 }
 
+static int imx_dsp_rproc_scu_api_detect_mode(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+
+	return imx_scu_get_handle(&priv->ipc_handle);
+}
+
 /**
  * imx_dsp_rproc_detect_mode() - detect DSP control mode
  * @priv: private data pointer
@@ -1078,11 +1087,6 @@ static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
 		return dcfg->ops->detect_mode(priv->rproc);
 
 	switch (dsp_dcfg->dcfg->method) {
-	case IMX_RPROC_SCU_API:
-		ret = imx_scu_get_handle(&priv->ipc_handle);
-		if (ret)
-			return ret;
-		break;
 	case IMX_RPROC_RESET_CONTROLLER:
 		priv->run_stall = devm_reset_control_get_exclusive(dev, "runstall");
 		if (IS_ERR(priv->run_stall)) {
@@ -1320,6 +1324,12 @@ static const struct imx_rproc_plat_ops imx_dsp_rproc_ops_mmio = {
 	.detect_mode	= imx_dsp_rproc_mmio_detect_mode,
 };
 
+static const struct imx_rproc_plat_ops imx_dsp_rproc_ops_scu_api = {
+	.start		= imx_dsp_rproc_scu_api_start,
+	.stop		= imx_dsp_rproc_scu_api_stop,
+	.detect_mode	= imx_dsp_rproc_scu_api_detect_mode,
+};
+
 /* Specific configuration for i.MX8MP */
 static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8mp = {
 	.att		= imx_dsp_rproc_att_imx8mp,
@@ -1352,7 +1362,7 @@ static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
 static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qxp = {
 	.att		= imx_dsp_rproc_att_imx8qxp,
 	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
-	.method		= IMX_RPROC_SCU_API,
+	.ops		= &imx_dsp_rproc_ops_scu_api,
 };
 
 static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
@@ -1363,7 +1373,7 @@ static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
 static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qm = {
 	.att		= imx_dsp_rproc_att_imx8qm,
 	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
-	.method		= IMX_RPROC_SCU_API,
+	.ops		= &imx_dsp_rproc_ops_scu_api,
 };
 
 static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
index 912827c39c0dedeed76c13740efd42a8e7cf9c45..a6b4625e8be76c6eb6a5d8ef45eb5f3aec5fe375 100644
--- a/drivers/remoteproc/imx_rproc.h
+++ b/drivers/remoteproc/imx_rproc.h
@@ -20,8 +20,6 @@ enum imx_rproc_method {
 	IMX_RPROC_NONE,
 	/* Through ARM SMCCC */
 	IMX_RPROC_SMC,
-	/* Through System Control Unit API */
-	IMX_RPROC_SCU_API,
 	/* Through Reset Controller API */
 	IMX_RPROC_RESET_CONTROLLER,
 };

-- 
2.37.1

[PATCH v3 10/11] remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_RESET_CONTROLLER switch case

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Introduce imx_dsp_rproc_reset_ctr_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_RESET_CONTROLLER to manage
remote processors.

Allows the removal of the IMX_RPROC_RESET_CONTROLLER switch-case blocks
from imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and
more maintainable code.

No functional changes.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_dsp_rproc.c | 69 +++++++++++++++++++++-----------------
 drivers/remoteproc/imx_rproc.h     |  2 --
 2 files changed, 38 insertions(+), 33 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index 91d041c15ac19f527f48c8189421f71fb7c9745e..6237e8db2eff759c2b7fcce5fb4a44e4ebaec8cf 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -346,6 +346,13 @@ static int imx_dsp_rproc_mmio_start(struct rproc *rproc)
 	return regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask, dcfg->src_start);
 }
 
+static int imx_dsp_rproc_reset_ctrl_start(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+
+	return reset_control_deassert(priv->run_stall);
+}
+
 static int imx_dsp_rproc_scu_api_start(struct rproc *rproc)
 {
 	struct imx_dsp_rproc *priv = rproc->priv;
@@ -374,13 +381,7 @@ static int imx_dsp_rproc_start(struct rproc *rproc)
 		goto start_ret;
 	}
 
-	switch (dcfg->method) {
-	case IMX_RPROC_RESET_CONTROLLER:
-		ret = reset_control_deassert(priv->run_stall);
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
+	return -EOPNOTSUPP;
 
 start_ret:
 	if (ret)
@@ -399,6 +400,13 @@ static int imx_dsp_rproc_mmio_stop(struct rproc *rproc)
 	return regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask, dcfg->src_stop);
 }
 
+static int imx_dsp_rproc_reset_ctrl_stop(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+
+	return reset_control_assert(priv->run_stall);
+}
+
 static int imx_dsp_rproc_scu_api_stop(struct rproc *rproc)
 {
 	struct imx_dsp_rproc *priv = rproc->priv;
@@ -428,13 +436,7 @@ static int imx_dsp_rproc_stop(struct rproc *rproc)
 		goto stop_ret;
 	}
 
-	switch (dcfg->method) {
-	case IMX_RPROC_RESET_CONTROLLER:
-		ret = reset_control_assert(priv->run_stall);
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
+	return -EOPNOTSUPP;
 
 stop_ret:
 	if (ret)
@@ -1057,6 +1059,20 @@ static int imx_dsp_rproc_mmio_detect_mode(struct rproc *rproc)
 	return 0;
 }
 
+static int imx_dsp_rproc_reset_ctrl_detect_mode(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+
+	priv->run_stall = devm_reset_control_get_exclusive(dev, "runstall");
+	if (IS_ERR(priv->run_stall)) {
+		dev_err(dev, "Failed to get DSP runstall reset control\n");
+		return PTR_ERR(priv->run_stall);
+	}
+
+	return 0;
+}
+
 static int imx_dsp_rproc_scu_api_detect_mode(struct rproc *rproc)
 {
 	struct imx_dsp_rproc *priv = rproc->priv;
@@ -1080,26 +1096,11 @@ static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
 {
 	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
 	const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
-	struct device *dev = priv->rproc->dev.parent;
-	int ret = 0;
 
 	if (dcfg->ops && dcfg->ops->detect_mode)
 		return dcfg->ops->detect_mode(priv->rproc);
 
-	switch (dsp_dcfg->dcfg->method) {
-	case IMX_RPROC_RESET_CONTROLLER:
-		priv->run_stall = devm_reset_control_get_exclusive(dev, "runstall");
-		if (IS_ERR(priv->run_stall)) {
-			dev_err(dev, "Failed to get DSP runstall reset control\n");
-			return PTR_ERR(priv->run_stall);
-		}
-		break;
-	default:
-		ret = -EOPNOTSUPP;
-		break;
-	}
-
-	return ret;
+	return -EOPNOTSUPP;
 }
 
 static const char *imx_dsp_clks_names[DSP_RPROC_CLK_MAX] = {
@@ -1324,6 +1325,12 @@ static const struct imx_rproc_plat_ops imx_dsp_rproc_ops_mmio = {
 	.detect_mode	= imx_dsp_rproc_mmio_detect_mode,
 };
 
+static const struct imx_rproc_plat_ops imx_dsp_rproc_ops_reset_ctrl = {
+	.start		= imx_dsp_rproc_reset_ctrl_start,
+	.stop		= imx_dsp_rproc_reset_ctrl_stop,
+	.detect_mode	= imx_dsp_rproc_reset_ctrl_detect_mode,
+};
+
 static const struct imx_rproc_plat_ops imx_dsp_rproc_ops_scu_api = {
 	.start		= imx_dsp_rproc_scu_api_start,
 	.stop		= imx_dsp_rproc_scu_api_stop,
@@ -1334,7 +1341,7 @@ static const struct imx_rproc_plat_ops imx_dsp_rproc_ops_scu_api = {
 static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8mp = {
 	.att		= imx_dsp_rproc_att_imx8mp,
 	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
-	.method		= IMX_RPROC_RESET_CONTROLLER,
+	.ops		= &imx_dsp_rproc_ops_reset_ctrl,
 };
 
 static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
index a6b4625e8be76c6eb6a5d8ef45eb5f3aec5fe375..6a7359f05178a937d02b027fe4166319068bd65c 100644
--- a/drivers/remoteproc/imx_rproc.h
+++ b/drivers/remoteproc/imx_rproc.h
@@ -20,8 +20,6 @@ enum imx_rproc_method {
 	IMX_RPROC_NONE,
 	/* Through ARM SMCCC */
 	IMX_RPROC_SMC,
-	/* Through Reset Controller API */
-	IMX_RPROC_RESET_CONTROLLER,
 };
 
 /* dcfg flags */

-- 
2.37.1

[PATCH v3 11/11] remoteproc: imx_rproc: Remove enum imx_rproc_method

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

There is no user of enum imx_rproc_method after moved to ops based
method. Remove it.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_rproc.h | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
index 6a7359f05178a937d02b027fe4166319068bd65c..1b2d9f4d6d19dcdc215be97f7e2ab3488281916a 100644
--- a/drivers/remoteproc/imx_rproc.h
+++ b/drivers/remoteproc/imx_rproc.h
@@ -15,13 +15,6 @@ struct imx_rproc_att {
 	int flags;
 };
 
-/* Remote core start/stop method */
-enum imx_rproc_method {
-	IMX_RPROC_NONE,
-	/* Through ARM SMCCC */
-	IMX_RPROC_SMC,
-};
-
 /* dcfg flags */
 #define IMX_RPROC_NEED_SYSTEM_OFF	BIT(0)
 #define IMX_RPROC_NEED_CLKS		BIT(1)
@@ -42,7 +35,6 @@ struct imx_rproc_dcfg {
 	u32				gpr_wait;
 	const struct imx_rproc_att	*att;
 	size_t				att_size;
-	enum imx_rproc_method		method;
 	u32				flags;
 	const struct imx_rproc_plat_ops	*ops;
 };

-- 
2.37.1

Re: [PATCH v3 00/11] remoteproc: imx_dsp_rproc: Refactor to use new ops and remove switch-case logic

[Iuliana Prodan]

On 11/11/2025 3:41 AM, Peng Fan (OSS) wrote:
> This patchset aligns imx_dsp_rproc with the cleanup and modernization
> previously applied to imx_rproc.c. The goal is to simplify the driver by
> transitioning to the new ops-based method, eliminating the legacy
> switch-case logic for a cleaner and more maintainable design.
> 
> Patches 1–5: General cleanup, including code simplification and adoption
>               of the devres API.
> Patches 6–10: Transition to the new ops-based approach, removing the
>                switch-case structure.
> Patch 11: Remove the obsolete enum imx_rproc_method.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>

For the series:

Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
on i.MX8M Plus, i.MX8ULP, i.MX8QM, i.MX8QXP

Iulia

> ---
> Changes in v3:
> - Collected R-b
> - Simplify commit log for patch 4 per Frank.
> - Link to V2: https://lore.kernel.org/all/20251106-imx-dsp-2025-11-06-v1-0-46028bc3459a@nxp.com/
> 
> Changes in v2:
> - Collected R-b
> - Patch 3: Update commit per Frank/Daniel
> - patch 8: Use priv->dsp_dcfg->dcfg to avoid adding "const struct imx_rproc_dsp_dcfg *dsp_dcfg"
> - Link to v1: https://lore.kernel.org/linux-remoteproc/CAEnQRZAOTFw=sBppHTYQAdfDBuNqkqk6gVO4FyP0EBsva3Oi+Q@mail.gmail.com/T/#m27c93af9fb1e7fdeb0766bdbffbaae39d79eefab
> 
> ---
> Peng Fan (11):
>        remoteproc: imx_dsp_rproc: simplify power domain attach and error handling
>        remoteproc: imx_dsp_rproc: Use devm_rproc_add() helper
>        remoteproc: imx_dsp_rproc: Use devm_pm_runtime_enable() helper
>        remoteproc: imx_dsp_rproc: Use dev_err_probe() for firmware and mode errors
>        remoteproc: imx_dsp_rproc: Drop extra space
>        remoteproc: imx_dsp_rproc: Use start/stop/detect_mode ops from imx_rproc_dcfg
>        remoteproc: imx_dsp_rproc: Move imx_dsp_rproc_dcfg closer to imx_dsp_rproc_of_match
>        remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_MMIO switch case
>        remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_SCU_API switch case
>        remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_RESET_CONTROLLER switch case
>        remoteproc: imx_rproc: Remove enum imx_rproc_method
> 
>   drivers/remoteproc/imx_dsp_rproc.c | 342 ++++++++++++++++++++-----------------
>   drivers/remoteproc/imx_rproc.h     |  14 --
>   2 files changed, 182 insertions(+), 174 deletions(-)
> ---
> base-commit: ab40c92c74c6b0c611c89516794502b3a3173966
> change-id: 20251111-imx-dsp-2025-11-11-1b0957e4cf5c
> 
> Best regards,

Re: [PATCH v3 01/11] remoteproc: imx_dsp_rproc: simplify power domain attach and error handling

[Mathieu Poirier]

On Tue, Nov 11, 2025 at 09:41:12AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Refactor imx_dsp_attach_pm_domains() to use devm_pm_domain_attach_list()
> directly, removing manual detach logic and simplifying resource management.
> 
> Also replace verbose error handling in imx_dsp_rproc_probe() with
> dev_err_probe() for cleaner and more consistent error reporting.
> 
> No functional changes.
> 
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_dsp_rproc.c | 29 ++++++++---------------------
>  1 file changed, 8 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
> index 6e78a01755c7bdc28cd93f00fe6f74affc3d96b0..c466363debbebe8f91b908b3bffaa32e9bf8b9a6 100644
> --- a/drivers/remoteproc/imx_dsp_rproc.c
> +++ b/drivers/remoteproc/imx_dsp_rproc.c
> @@ -1062,14 +1062,12 @@ static const struct rproc_ops imx_dsp_rproc_ops = {
>  static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
>  {
>  	struct device *dev = priv->rproc->dev.parent;
> -	int ret;
>  
>  	/* A single PM domain is already attached. */
>  	if (dev->pm_domain)
>  		return 0;
>  
> -	ret = dev_pm_domain_attach_list(dev, NULL, &priv->pd_list);
> -	return ret < 0 ? ret : 0;
> +	return devm_pm_domain_attach_list(dev, NULL, &priv->pd_list);
>  }
>  
>  /**
> @@ -1186,35 +1184,25 @@ static int imx_dsp_rproc_probe(struct platform_device *pdev)
>  
>  	/* There are multiple power domains required by DSP on some platform */
>  	ret = imx_dsp_attach_pm_domains(priv);
> -	if (ret) {
> -		dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
> -		return ret;
> -	}
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "failed on imx_dsp_attach_pm_domains\n");
> +
>  	/* Get clocks */
>  	ret = imx_dsp_rproc_clk_get(priv);
> -	if (ret) {
> -		dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
> -		goto err_detach_domains;
> -	}
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed on imx_dsp_rproc_clk_get\n");
>  
>  	init_completion(&priv->pm_comp);
>  	rproc->auto_boot = false;
>  	ret = rproc_add(rproc);
> -	if (ret) {
> -		dev_err(dev, "rproc_add failed\n");
> -		goto err_detach_domains;
> -	}
> +	if (ret)
> +		return dev_err_probe(dev, ret, "rproc_add failed\n");
>  
>  	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_XTENSA);
>  
>  	pm_runtime_enable(dev);
>  
>  	return 0;
> -
> -err_detach_domains:
> -	dev_pm_domain_detach_list(priv->pd_list);
> -
> -	return ret;
>  }
>  
>  static void imx_dsp_rproc_remove(struct platform_device *pdev)
> @@ -1224,7 +1212,6 @@ static void imx_dsp_rproc_remove(struct platform_device *pdev)
>  
>  	pm_runtime_disable(&pdev->dev);
>  	rproc_del(rproc);
> -	dev_pm_domain_detach_list(priv->pd_list);

This patch is giving me a compilation warning.

>  }
>  
>  /* pm runtime functions */
> 
> -- 
> 2.37.1
> 

Re: [PATCH v3 11/11] remoteproc: imx_rproc: Remove enum imx_rproc_method

[Mathieu Poirier]

On Tue, Nov 11, 2025 at 09:41:22AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> There is no user of enum imx_rproc_method after moved to ops based
> method. Remove it.
> 
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.h | 8 --------
>  1 file changed, 8 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
> index 6a7359f05178a937d02b027fe4166319068bd65c..1b2d9f4d6d19dcdc215be97f7e2ab3488281916a 100644
> --- a/drivers/remoteproc/imx_rproc.h
> +++ b/drivers/remoteproc/imx_rproc.h
> @@ -15,13 +15,6 @@ struct imx_rproc_att {
>  	int flags;
>  };
>  
> -/* Remote core start/stop method */
> -enum imx_rproc_method {
> -	IMX_RPROC_NONE,
> -	/* Through ARM SMCCC */
> -	IMX_RPROC_SMC,
> -};
> -
>  /* dcfg flags */
>  #define IMX_RPROC_NEED_SYSTEM_OFF	BIT(0)
>  #define IMX_RPROC_NEED_CLKS		BIT(1)
> @@ -42,7 +35,6 @@ struct imx_rproc_dcfg {
>  	u32				gpr_wait;
>  	const struct imx_rproc_att	*att;
>  	size_t				att_size;
> -	enum imx_rproc_method		method;
>  	u32				flags;
>  	const struct imx_rproc_plat_ops	*ops;
>  };

After all this cleanup, please remove the goto statements in
imx_dsp_rproc_{start,stop}(), as it was done for imx_rproc_{start,stop}().

This set can get in the next merge window if you send me another revision by
tomorrow.

Thanks,
Mathieu

> 
> -- 
> 2.37.1
> 

RE: [PATCH v3 11/11] remoteproc: imx_rproc: Remove enum imx_rproc_method

[Peng Fan (OSS)]

Hi Mathieu,

> Subject: Re: [PATCH v3 11/11] remoteproc: imx_rproc: Remove enum
> imx_rproc_method
...
> >  };
> 
> After all this cleanup, please remove the goto statements in
> imx_dsp_rproc_{start,stop}(), as it was done for
> imx_rproc_{start,stop}().
> 
> This set can get in the next merge window if you send me another
> revision by tomorrow.

Thank you for the feedback and the opportunity to include this in
the next merge window.

I have sent out v4 of the patch series which includes an additional
patch to remove the goto statements in imx_dsp_rproc_{start,stop}
functions. And v4 also addresses the build warning in patch 1.

Thanks,
Peng.