* intel agp card support 2 @ 2005-01-04 14:39 Stijn De Weirdt 2005-01-04 15:34 ` Ronald G. Minnich 0 siblings, 1 reply; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-04 14:39 UTC (permalink / raw) To: xen-devel hi all, first this is actually in reply to some other mails. i provide the output of lspci -xxx, but also a part from X.0.log: it shows the 0xffffffff that Ronald G. Minnich told about. if you want more info, let me know. (xen-2.0-testing tarball from 03/01/2005, 2.4.28, on slc3) X.0.log (final part): (**) I810(0): Depth 24, (--) framebuffer bpp 32 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) I810(0): initializing int10 (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (WW) System lacks support for changing MTRRs (EE) I810(0): unknown type(0xffffffff)=0xff (II) I810(0): EAX=0x00004f00, EBX=0x00000000, ECX=0x00000000, EDX=0x00000000 (II) I810(0): ESP=0x00000ffa, EBP=0x00000000, ESI=0x00000000, EDI=0x00002000 (II) I810(0): CS=0xc000, SS=0x0100, DS=0x0040, ES=0x0000, FS=0x0000, GS=0x0000 (II) I810(0): EIP=0x00000014, EFLAGS=0x00003200 (II) I810(0): code at 0x000c0014: e9 0d 14 27 40 00 b0 0a 30 30 49 42 4d 20 56 47 41 20 43 6f 6d 70 61 74 69 62 6c 65 20 42 49 4f (II) stack at 0x00001ffa: 00 06 00 00 00 32 (II) I810(0): VESA BIOS not detected (EE) I810(0): VBE initialization failed. (II) UnloadModule: "i810" (II) UnloadModule: "int10" (II) UnloadModule: "vgahw" (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (II) UnloadModule: "vbe" (II) Unloading /usr/X11R6/lib/modules/libvbe.a (II) UnloadModule: "int10" (II) Unloading /usr/X11R6/lib/modules/linux/libint10.a (EE) Screen(s) found, but none have a usable configuration. --------------------------------------------------------- output from lspci -xxx: 00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) 00: 86 80 70 25 06 01 90 20 02 00 00 06 00 00 00 00 10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 70 25 30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 44 00 40 80 1c 00 00 00 00 00 00 00 00 00 60: 08 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 10 11 01 00 00 33 33 00 00 00 00 00 00 1a 38 00 a0: 02 00 30 00 17 42 00 1f 00 00 00 00 00 00 00 00 b0: 00 00 00 00 30 00 00 00 00 00 00 00 10 10 00 00 c0: 00 00 00 00 00 3f 0e 28 00 01 00 00 00 00 00 00 d0: 02 28 04 0e 0b 0d 00 00 00 00 00 00 00 00 40 41 e0: 00 00 00 00 09 00 06 01 00 02 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 68 0f 03 00 00 00 00 00 00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02) 00: 86 80 72 25 07 00 90 00 02 00 00 03 00 00 00 00 10: 08 00 00 f0 00 00 a8 ff 01 ec 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 43 4c 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 0f 47 8c 23 00 00 00 00 00 00 00 00 50: 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 01 02 ff 00 00 00 71 02 50 20 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 24 08 00 00 24 08 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 3f 0e 28 00 00 00 00 00 00 00 00 d0: 01 00 21 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 2a 00 00 00 09 00 06 01 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 68 0f 03 00 00 00 00 00 00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 c8 00 00 00 00 00 00 00 00 00 00 86 80 43 4c 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 03 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 cc 00 00 00 00 00 00 00 00 00 00 86 80 43 4c 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d0 00 00 00 00 00 00 00 00 00 00 86 80 43 4c 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d4 00 00 00 00 00 00 00 00 00 00 86 80 43 4c 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00 10: 00 fc a7 ff 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 43 4c 30: 00 00 00 00 50 00 00 00 00 00 00 00 09 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00 60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 c0 70: 00 00 c5 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 ff ff 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 80 00 00 88 83 40 00 66 0f 05 00 06 14 00 00 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev c2) 00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 b0 b0 80 22 20: 80 ff 80 ff f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 02 40: 02 28 30 76 00 00 00 00 00 00 00 00 00 00 00 00 50: 02 64 73 00 00 00 00 00 50 01 34 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 4d 37 00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 00: 86 80 d0 24 0f 01 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 02 00 50: 00 00 00 00 00 00 00 00 01 05 00 00 10 00 00 00 60: 0b 03 0a 05 d0 00 00 00 09 80 80 09 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 02 00 00 30 00 00 00 0d 00 00 00 00 03 01 00 b0: 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 86 21 00 00 00 0f 00 00 04 00 00 00 00 00 00 00 e0: 10 00 00 80 81 06 0f 14 33 22 11 00 00 00 67 45 f0: 00 00 40 00 04 00 00 00 66 0f 05 3e 00 00 00 02 00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 00: 86 80 db 24 07 00 88 02 02 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: a1 ff 00 00 00 00 00 3f 00 00 00 00 86 80 43 4c 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00 40: 07 a3 07 a3 00 00 00 00 05 00 01 02 00 00 00 00 50: 00 00 00 00 11 10 00 00 00 00 00 00 00 00 00 00 60: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) 00: 86 80 d1 24 05 00 a0 02 02 8f 01 01 00 00 00 00 10: 01 e8 00 00 01 e4 00 00 01 e0 00 00 01 dc 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 86 80 43 4c 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 03 00 00 20 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 c4 00 00 00 00 00 00 00 00 00 00 86 80 43 4c 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 00: 86 80 d5 24 06 00 90 02 02 00 01 04 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 f8 a7 ff 00 f4 a7 ff 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 02 e0 30: 00 00 00 00 50 00 00 00 00 00 00 00 03 02 00 00 40: 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 01:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet Controller (rev 01) 00: 86 80 50 10 17 01 90 02 01 00 00 02 10 20 00 00 10: 00 f0 8f ff 01 bc 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 3a 30 30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 01 08 38 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe e0: 00 40 00 3a 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-04 14:39 intel agp card support 2 Stijn De Weirdt @ 2005-01-04 15:34 ` Ronald G. Minnich 2005-01-04 17:01 ` Stijn De Weirdt 0 siblings, 1 reply; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-04 15:34 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: xen-devel On Tue, 4 Jan 2005, Stijn De Weirdt wrote: > hi all, > > first this is actually in reply to some other mails. > i provide the output of lspci -xxx, but also a part from X.0.log: it > shows the 0xffffffff that Ronald G. Minnich told about. if you want > more info, let me know. > (xen-2.0-testing tarball from 03/01/2005, 2.4.28, on slc3) > > X.0.log (final part): > > (**) I810(0): Depth 24, (--) framebuffer bpp 32 > (==) I810(0): RGB weight 888 > (==) I810(0): Default visual is TrueColor > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a > (II) I810(0): initializing int10 > (WW) I810(0): Bad V_BIOS checksum this is bad. It's a warning but it should not be happening. It means the vga bios checksum was wrong. Do you get this if you boot without xen, i.e. standard linux? > (II) I810(0): Primary V_BIOS segment is: 0xc000 > (WW) System lacks support for changing MTRRs > (EE) I810(0): unknown type(0xffffffff)=0xff I forget where this EE comes from, but: > (II) I810(0): EAX=0x00004f00, EBX=0x00000000, ECX=0x00000000, EDX=0x00000000 > (II) I810(0): ESP=0x00000ffa, EBP=0x00000000, ESI=0x00000000, EDI=0x00002000 > (II) I810(0): CS=0xc000, SS=0x0100, DS=0x0040, ES=0x0000, FS=0x0000, GS=0x0000 > (II) I810(0): EIP=0x00000014, EFLAGS=0x00003200 > (II) I810(0): code at 0x000c0014: > e9 0d 14 27 40 00 b0 0a 30 30 49 42 4d 20 56 47 > 41 20 43 6f 6d 70 61 74 69 62 6c 65 20 42 49 4f > (II) stack at 0x00001ffa: > 00 06 00 00 00 32 > (II) I810(0): VESA BIOS not detected As I read this, the module loader tried to run the vga bios and failed, as it could not get to the actual BIOS code? That's how it looks to me anyway. I have no idea: has anyone seen option rom access working under Xen? I have not, but I have not tried this recently. The VGA bios ROM is not accessible on my laptop, however. Does Xen currently allow a guest to set enable the option rom access and set the register (0x30 I think) for the option ram base address? > (EE) I810(0): VBE initialization failed. So you get this error, and ... > (II) UnloadModule: "i810" > (II) UnloadModule: "int10" > (II) UnloadModule: "vgahw" > (II) Unloading /usr/X11R6/lib/modules/libvgahw.a > (II) UnloadModule: "vbe" > (II) Unloading /usr/X11R6/lib/modules/libvbe.a > (II) UnloadModule: "int10" > (II) Unloading /usr/X11R6/lib/modules/linux/libint10.a > (EE) Screen(s) found, but none have a usable configuration. it unloads the modules since it can't run the vga bios. ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-04 15:34 ` Ronald G. Minnich @ 2005-01-04 17:01 ` Stijn De Weirdt 2005-01-04 17:02 ` Stijn De Weirdt ` (2 more replies) 0 siblings, 3 replies; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-04 17:01 UTC (permalink / raw) To: xen-devel On Tue, 4 Jan 2005 08:34:19 -0700 (MST), Ronald G. Minnich <rminnich@lanl.gov> wrote: > > (WW) I810(0): Bad V_BIOS checksum > > this is bad. It's a warning but it should not be happening. It means the > vga bios checksum was wrong. Do you get this if you boot without xen, i.e. > standard linux? yes, it's actaully not that unfrequent. > > > (II) I810(0): Primary V_BIOS segment is: 0xc000 > > (WW) System lacks support for changing MTRRs > > (EE) I810(0): unknown type(0xffffffff)=0xff > i think this is much worse :) > I forget where this EE comes from, but: > > (II) I810(0): EAX=0x00004f00, EBX=0x00000000, ECX=0x00000000, EDX=0x00000000 > > (II) I810(0): ESP=0x00000ffa, EBP=0x00000000, ESI=0x00000000, EDI=0x00002000 > > (II) I810(0): CS=0xc000, SS=0x0100, DS=0x0040, ES=0x0000, FS=0x0000, GS=0x0000 > > (II) I810(0): EIP=0x00000014, EFLAGS=0x00003200 > > (II) I810(0): code at 0x000c0014: > > e9 0d 14 27 40 00 b0 0a 30 30 49 42 4d 20 56 47 > > 41 20 43 6f 6d 70 61 74 69 62 6c 65 20 42 49 4f > > (II) stack at 0x00001ffa: > > 00 06 00 00 00 32 > > (II) I810(0): VESA BIOS not detected > > As I read this, the module loader tried to run the vga bios and failed, as > it could not get to the actual BIOS code? That's how it looks to me > anyway. > > I have no idea: has anyone seen option rom access working under Xen? I > have not, but I have not tried this recently. The VGA bios ROM is not > accessible on my laptop, however. > > Does Xen currently allow a guest to set enable the option rom access and > set the register (0x30 I think) for the option ram base address? > > > > (EE) I810(0): VBE initialization failed. > > So you get this error, and ... > > > (II) UnloadModule: "i810" > > (II) UnloadModule: "int10" > > (II) UnloadModule: "vgahw" > > (II) Unloading /usr/X11R6/lib/modules/libvgahw.a > > (II) UnloadModule: "vbe" > > (II) Unloading /usr/X11R6/lib/modules/libvbe.a > > (II) UnloadModule: "int10" > > (II) Unloading /usr/X11R6/lib/modules/linux/libint10.a > > (EE) Screen(s) found, but none have a usable configuration. > > it unloads the modules since it can't run the vga bios. > > ron > i've attached a working X.0.log hopefully this gets resolved soon. stijn ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-04 17:01 ` Stijn De Weirdt @ 2005-01-04 17:02 ` Stijn De Weirdt 2005-01-04 17:08 ` Ronald G. Minnich 2005-01-04 17:25 ` Ronald G. Minnich 2 siblings, 0 replies; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-04 17:02 UTC (permalink / raw) To: xen-devel [-- Attachment #1: Type: text/plain, Size: 2425 bytes --] attachment added On Tue, 4 Jan 2005 18:01:30 +0100, Stijn De Weirdt <stijn.deweirdt@gmail.com> wrote: > On Tue, 4 Jan 2005 08:34:19 -0700 (MST), Ronald G. Minnich > <rminnich@lanl.gov> wrote: > > > (WW) I810(0): Bad V_BIOS checksum > > > > this is bad. It's a warning but it should not be happening. It means the > > vga bios checksum was wrong. Do you get this if you boot without xen, i.e. > > standard linux? > yes, it's actaully not that unfrequent. > > > > > (II) I810(0): Primary V_BIOS segment is: 0xc000 > > > (WW) System lacks support for changing MTRRs > > > (EE) I810(0): unknown type(0xffffffff)=0xff > > > i think this is much worse :) > > > I forget where this EE comes from, but: > > > (II) I810(0): EAX=0x00004f00, EBX=0x00000000, ECX=0x00000000, EDX=0x00000000 > > > (II) I810(0): ESP=0x00000ffa, EBP=0x00000000, ESI=0x00000000, EDI=0x00002000 > > > (II) I810(0): CS=0xc000, SS=0x0100, DS=0x0040, ES=0x0000, FS=0x0000, GS=0x0000 > > > (II) I810(0): EIP=0x00000014, EFLAGS=0x00003200 > > > (II) I810(0): code at 0x000c0014: > > > e9 0d 14 27 40 00 b0 0a 30 30 49 42 4d 20 56 47 > > > 41 20 43 6f 6d 70 61 74 69 62 6c 65 20 42 49 4f > > > (II) stack at 0x00001ffa: > > > 00 06 00 00 00 32 > > > (II) I810(0): VESA BIOS not detected > > > > As I read this, the module loader tried to run the vga bios and failed, as > > it could not get to the actual BIOS code? That's how it looks to me > > anyway. > > > > I have no idea: has anyone seen option rom access working under Xen? I > > have not, but I have not tried this recently. The VGA bios ROM is not > > accessible on my laptop, however. > > > > Does Xen currently allow a guest to set enable the option rom access and > > set the register (0x30 I think) for the option ram base address? > > > > > > > (EE) I810(0): VBE initialization failed. > > > > So you get this error, and ... > > > > > (II) UnloadModule: "i810" > > > (II) UnloadModule: "int10" > > > (II) UnloadModule: "vgahw" > > > (II) Unloading /usr/X11R6/lib/modules/libvgahw.a > > > (II) UnloadModule: "vbe" > > > (II) Unloading /usr/X11R6/lib/modules/libvbe.a > > > (II) UnloadModule: "int10" > > > (II) Unloading /usr/X11R6/lib/modules/linux/libint10.a > > > (EE) Screen(s) found, but none have a usable configuration. > > > > it unloads the modules since it can't run the vga bios. > > > > ron > > > i've attached a working X.0.log > > hopefully this gets resolved soon. > > stijn > [-- Attachment #2: XFree86.0.log --] [-- Type: application/octet-stream, Size: 55735 bytes --] XFree86 Version 4.3.0 (Custom Build: 4.3.0-69.EL) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.21-20.ELsmp i686 [ELF] Build Date: 05 October 2004 Build Host: noswad.fnal.gov Before reporting any problems, please make sure you are using the most recent XFree86 packages available from Red Hat by checking for updates at http://rhn.redhat.com/errata or by using the Red Hat Network up2date tool. If you still encounter problems, please file bug reports in the XFree86.org bugzilla at http://bugs.xfree86.org and/or Red Hat bugzilla at http://bugzilla.redhat.com Module Loader present OS Kernel: Linux version 2.4.21-20.0.1.EL.cern (root@lxcert-i386.cern.ch) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-42)) #1 Fri Dec 3 10:58:20 CET 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jan 4 17:44:48 2005 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8001400c, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2570 card 8086,2570 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2572 card 8086,4c43 rev 02 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24d2 card 8086,4c43 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24d4 card 8086,4c43 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24d7 card 8086,4c43 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,24de card 8086,4c43 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24dd card 8086,4c43 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24db card 8086,4c43 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,24d1 card 8086,4c43 rev 02 class 01,01,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,24d3 card 8086,4c43 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24d5 card 8086,e002 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:08:0: chip 8086,1050 card 8086,303a rev 01 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B] [1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B] [2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] [3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xff800000 - 0xff8fffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Intel Corp. 865G Chipset Graphics Controller rev 2, Mem @ 0xf0000000/27, 0xffa80000/19, I/O @ 0xec00/3 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff (II) Active PCI resource ranges: [0] -1 0 0xff8ff000 - 0xff8fffff (0x1000) MX[B] [1] -1 0 0xffa7f400 - 0xffa7f4ff (0x100) MX[B] [2] -1 0 0xffa7f800 - 0xffa7f9ff (0x200) MX[B] [3] -1 0 0x3f000000 - 0x3f0003ff (0x400) MX[B] [4] -1 0 0xffa7fc00 - 0xffa7ffff (0x400) MX[B] [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [6] -1 0 0xffa80000 - 0xffafffff (0x80000) MX[B](B) [7] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [8] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B] [9] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [10] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] [11] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B] [12] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B] [13] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [14] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [18] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B] [19] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [20] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xff8ff000 - 0xff8fffff (0x1000) MX[B] [1] -1 0 0xffa7f400 - 0xffa7f4ff (0x100) MX[B] [2] -1 0 0xffa7f800 - 0xffa7f9ff (0x200) MX[B] [3] -1 0 0x3f000000 - 0x3f0003ff (0x400) MX[B] [4] -1 0 0xffa7fc00 - 0xffa7ffff (0x400) MX[B] [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [6] -1 0 0xffa80000 - 0xffafffff (0x80000) MX[B](B) [7] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [8] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B] [9] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [10] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] [11] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B] [12] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B] [13] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [14] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [18] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B] [19] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [20] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3effffff (0x3ef00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3effffff (0x3ef00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xff8ff000 - 0xff8fffff (0x1000) MX[B] [6] -1 0 0xffa7f400 - 0xffa7f4ff (0x100) MX[B] [7] -1 0 0xffa7f800 - 0xffa7f9ff (0x200) MX[B] [8] -1 0 0x3f000000 - 0x3f0003ff (0x400) MX[B] [9] -1 0 0xffa7fc00 - 0xffa7ffff (0x400) MX[B] [10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [11] -1 0 0xffa80000 - 0xffafffff (0x80000) MX[B](B) [12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B] [16] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] [18] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B] [19] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B] [20] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [21] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [22] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [25] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B] [26] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [27] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "i810" (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o (II) Module i810: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.3.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G (II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (--) Chipset 865G found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3effffff (0x3ef00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xff8ff000 - 0xff8fffff (0x1000) MX[B] [6] -1 0 0xffa7f400 - 0xffa7f4ff (0x100) MX[B] [7] -1 0 0xffa7f800 - 0xffa7f9ff (0x200) MX[B] [8] -1 0 0x3f000000 - 0x3f0003ff (0x400) MX[B] [9] -1 0 0xffa7fc00 - 0xffa7ffff (0x400) MX[B] [10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [11] -1 0 0xffa80000 - 0xffafffff (0x80000) MX[B](B) [12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B] [16] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] [18] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B] [19] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B] [20] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [21] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [22] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [25] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B] [26] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [27] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B) (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3effffff (0x3ef00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xff8ff000 - 0xff8fffff (0x1000) MX[B] [6] -1 0 0xffa7f400 - 0xffa7f4ff (0x100) MX[B] [7] -1 0 0xffa7f800 - 0xffa7f9ff (0x200) MX[B] [8] -1 0 0x3f000000 - 0x3f0003ff (0x400) MX[B] [9] -1 0 0xffa7fc00 - 0xffa7ffff (0x400) MX[B] [10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [11] -1 0 0xffa80000 - 0xffafffff (0x80000) MX[B](B) [12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B] [19] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [20] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] [21] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B] [22] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B] [23] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [24] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [25] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [26] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [27] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [28] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B] [29] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [30] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B) [31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) I810(0): Depth 24, (--) framebuffer bpp 32 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) I810(0): initializing int10 (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 16192 kB (II) I810(0): VESA VBE OEM: Intel(r)865G Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r)865G Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): Integrated Graphics Chipset: Intel(R) 865G (--) I810(0): Chipset: "865G" (--) I810(0): Linear framebuffer at 0xF0000000 (--) I810(0): IO registers at addr 0xFFA80000 (II) I810(0): detected 16252 kB stolen memory. (II) I810(0): I830CheckAvailableMemory: 947196 kB available (--) I810(0): Pre-allocated VideoRAM: 16252 kByte (==) I810(0): VideoRAM: 32768 kByte (==) I810(0): video overlay key set to 0x101fe (**) I810(0): page flipping disabled (--) I810(0): Maximum frambuffer space: 32616 kByte (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): 1 display pipe available. (II) I810(0): Display Info: CRT: attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: TV: attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: LFP (local flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: DFP2 (second digital flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Currently active displays on Pipe A: (II) I810(0): CRT (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level 2 (II) I810(0): VESA VBE DDC transfer in appr. 1 sec. (II) I810(0): VESA VBE DDC read successfully (II) I810(0): Manufacturer: SAM Model: 11c Serial#: 1196634421 (II) I810(0): Year: 2004 Week: 32 (II) I810(0): EDID Version: 1.3 (II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) I810(0): Sync: Separate Composite (II) I810(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23 (II) I810(0): Gamma: 2.20 (II) I810(0): DPMS capabilities: Off; RGB/Color Display (II) I810(0): First detailed timing is preferred mode (II) I810(0): redX: 0.628 redY: 0.353 greenX: 0.290 greenY: 0.595 (II) I810(0): blueX: 0.144 blueY: 0.088 whiteX: 0.313 whiteY: 0.329 (II) I810(0): Supported VESA Video Modes: (II) I810(0): 720x400@70Hz (II) I810(0): 640x480@60Hz (II) I810(0): 640x480@67Hz (II) I810(0): 640x480@72Hz (II) I810(0): 640x480@75Hz (II) I810(0): 800x600@56Hz (II) I810(0): 800x600@60Hz (II) I810(0): 800x600@72Hz (II) I810(0): 800x600@75Hz (II) I810(0): 832x624@75Hz (II) I810(0): 1024x768@60Hz (II) I810(0): 1024x768@70Hz (II) I810(0): 1024x768@75Hz (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 65.0 MHz Image Size: 304 x 228 mm (II) I810(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) I810(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) I810(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 80 MHz (II) I810(0): Monitor name: SyncMaster (II) I810(0): Serial No: HVEX811362 (II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs. (II) I810(0): Will use BIOS call 0x5f64 to enable displays. (--) I810(0): Maximum space available for video modes: 16192 kByte Mode: 30 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 640 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 49 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 49 LinNumberOfImagePages: 49 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 32 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 800 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 35 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 800 BnkNumberOfImagePages: 35 LinNumberOfImagePages: 35 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 34 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 1024 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 20 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1024 BnkNumberOfImagePages: 20 LinNumberOfImagePages: 20 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 38 (1280x1024) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 1280 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 11 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 11 LinNumberOfImagePages: 11 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 3a (1600x1200) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 1600 XResolution: 1600 YResolution: 1200 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 7 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 3c (1920x1440) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 1920 XResolution: 1920 YResolution: 1440 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 5 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1920 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 41 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 1280 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 27 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 27 LinNumberOfImagePages: 27 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 43 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 1600 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 15 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 15 LinNumberOfImagePages: 15 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 45 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 2048 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 9 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 2048 BnkNumberOfImagePages: 9 LinNumberOfImagePages: 9 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 49 (1280x1024) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 2560 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 5 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 4b (1600x1200) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 3200 XResolution: 1600 YResolution: 1200 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 3 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 4d (1920x1440) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 3840 XResolution: 1920 YResolution: 1440 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 3840 BnkNumberOfImagePages: 2 LinNumberOfImagePages: 2 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 50 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 2560 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 12 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 12 LinNumberOfImagePages: 12 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 52 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 3200 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 7 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 54 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 4096 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 4 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 4096 BnkNumberOfImagePages: 4 LinNumberOfImagePages: 4 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *(WW) (1280x1024,Monitor0) mode clock 108MHz exceeds DDC maximum 80MHz (WW) (1280x1024,Monitor0) mode clock 135MHz exceeds DDC maximum 80MHz (WW) (1280x1024,Monitor0) mode clock 157.5MHz exceeds DDC maximum 80MHz (II) I810(0): Not using built-in mode "1280x1024" (hsync out of range) Mode: 58 (1280x1024) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 5120 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 5120 BnkNumberOfImagePages: 2 LinNumberOfImagePages: 2 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *(WW) (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 80MHz (WW) (1600x1200,Monitor0) mode clock 175.5MHz exceeds DDC maximum 80MHz (WW) (1600x1200,Monitor0) mode clock 189MHz exceeds DDC maximum 80MHz (WW) (1600x1200,Monitor0) mode clock 202.5MHz exceeds DDC maximum 80MHz (WW) (1600x1200,Monitor0) mode clock 229.5MHz exceeds DDC maximum 80MHz (II) I810(0): Not using built-in mode "1600x1200" (hsync out of range) Mode: 5a (1600x1200) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 6400 XResolution: 1600 YResolution: 1200 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 6400 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *(WW) (1920x1440,Monitor0) mode clock 234MHz exceeds DDC maximum 80MHz (WW) (1920x1440,Monitor0) mode clock 297MHz exceeds DDC maximum 80MHz (WW) (1920x1440,Monitor0) mode clock 341.35MHz exceeds DDC maximum 80MHz (II) I810(0): Not using built-in mode "1920x1440" (hsync out of range) Mode: 5c (1920x1440) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005887 BytesPerScanline: 7680 XResolution: 1920 YResolution: 1440 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 0 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 7680 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 60 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 61 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 62 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 63 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 64 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 65 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 66 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 67 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 68 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (II) I810(0): Monitor0: Using hsync range of 30.00-61.00 kHz (II) I810(0): Monitor0: Using vrefresh range of 56.00-75.00 Hz (--) I810(0): Virtual size is 1024x768 (pitch 1024) (**) I810(0): *Built-in mode "1024x768" (**) I810(0): *Built-in mode "800x600" (**) I810(0): *Built-in mode "640x480" (WW) (1024x768,Monitor0) mode clock 94.5MHz exceeds DDC maximum 80MHz (II) I810(0): Attempting to use 75Hz refresh for mode "1024x768" (54) (II) I810(0): Attempting to use 72Hz refresh for mode "800x600" (52) (II) I810(0): Attempting to use 73Hz refresh for mode "640x480" (50) (**) I810(0): Display dimensions: (300, 230) mm (**) I810(0): DPI set to (86, 84) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "shadow" (II) LoadModule: "shadow" (II) Loading /usr/X11R6/lib/modules/libshadow.a (II) Module shadow: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xffa80000 - 0xffafffff (0x80000) MS[B] [1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MS[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3effffff (0x3ef00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xff8ff000 - 0xff8fffff (0x1000) MX[B] [8] -1 0 0xffa7f400 - 0xffa7f4ff (0x100) MX[B] [9] -1 0 0xffa7f800 - 0xffa7f9ff (0x200) MX[B] [10] -1 0 0x3f000000 - 0x3f0003ff (0x400) MX[B] [11] -1 0 0xffa7fc00 - 0xffa7ffff (0x400) MX[B] [12] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O [13] -1 0 0xffa80000 - 0xffafffff (0x80000) MX[B](B) [14] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [18] 0 0 0x0000ec00 - 0x0000ec07 (0x8) IS[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B] [22] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [23] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] [24] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B] [25] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B] [26] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [27] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B] [28] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [29] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [30] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [31] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B] [32] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [33] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B) [34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) I810(0): initializing int10 (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 16192 kB (II) I810(0): VESA VBE OEM: Intel(r)865G Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r)865G Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (==) I810(0): Default visual is TrueColor (II) I810(0): Allocated 128 kB for the ring buffer at 0x0 (II) I810(0): Allocating at least 512 scanlines for pixmap cache (II) I810(0): Initial framebuffer allocation size: 5120 kByte (II) I810(0): Allocated 4 kB for HW cursor at 0x7fff000 (II) I810(0): Allocated 4 kB for Overlay registers at 0x7ffe000 (0x37abf000). (II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fee000 drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmGetBusid returned '' (II) I810(0): [drm] loaded kernel module for "i830" driver (II) I810(0): [drm] created "i830" driver at busid "PCI:0:2:0" (II) I810(0): [drm] added 8192 byte SAREA at 0xf8b07000 (II) I810(0): [drm] mapped SAREA 0xf8b07000 to 0xb74f0000 (II) I810(0): [drm] framebuffer handle = 0xf0020000 (II) I810(0): [drm] added 1 reserved context for kernel (II) I810(0): Allocated 3072 kB for the back buffer at 0x7800000. (II) I810(0): Allocated 3072 kB for the depth buffer at 0x7400000. (II) I810(0): Allocated 32 kB for the logical context at 0x73f8000. (II) I810(0): Allocated 1024 kB for the DMA buffers at 0x72f8000. (II) I810(0): Allocated 19968 kB for textures at 0xfec80000 (II) I810(0): Updated framebuffer allocation size from 5120 to 5400 kByte (II) I810(0): Updated pixmap cache from 512 scanlines to 582 scanlines (II) I810(0): 0x8ea7f28: Memory at offset 0x00020000, size 5400 kBytes (II) I810(0): 0x8ea7f48: Memory at offset 0x07fff000, size 4 kBytes (II) I810(0): 0x8ea7f6c: Memory at offset 0x00000000, size 128 kBytes (II) I810(0): 0x8ea7f9c: Memory at offset 0x07fee000, size 64 kBytes (II) I810(0): 0x8ea7fbc: Memory at offset 0x07ffe000, size 4 kBytes (II) I810(0): 0x8ea7fdc: Memory at offset 0x07800000, size 3072 kBytes (II) I810(0): 0x8ea7ffc: Memory at offset 0x07400000, size 3072 kBytes (II) I810(0): 0x8ea805c: Memory at offset 0x073f8000, size 32 kBytes (II) I810(0): 0x8ea803c: Memory at offset 0x072f8000, size 1024 kBytes (II) I810(0): 0x8ea801c: Memory at offset 0x00566000, size 19968 kBytes (II) I810(0): Activating tiled memory for the back buffer. (II) I810(0): Activating tiled memory for the depth buffer. (II) I810(0): [drm] Registers = 0xffa80000 (II) I810(0): [drm] Back Buffer = 0xf7800000 (II) I810(0): [drm] Depth Buffer = 0xf7400000 (II) I810(0): [drm] DMA Buffers = 0xf72f8000 (II) I810(0): [drm] ring buffer = 0xf0000000 (II) I810(0): [drm] textures = 0xf0566000 (II) I810(0): [drm] added 256 4096 byte DMA buffers (II) I810(0): [drm] dma control initialized, using IRQ 11 (II) I810(0): [dri] visual configs initialized (==) I810(0): Write-combining range (0xf0000000,0x8000000) (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) I810(0): xf86BindGARTMemory: bind key 7 at 0x00fdf000 (pgoffset 4063) (II) I810(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767) (II) I810(0): xf86BindGARTMemory: bind key 2 at 0x07fee000 (pgoffset 32750) (II) I810(0): xf86BindGARTMemory: bind key 1 at 0x07ffe000 (pgoffset 32766) (II) I810(0): xf86BindGARTMemory: bind key 3 at 0x07800000 (pgoffset 30720) (II) I810(0): xf86BindGARTMemory: bind key 4 at 0x07400000 (pgoffset 29696) (II) I810(0): xf86BindGARTMemory: bind key 5 at 0x073f8000 (pgoffset 29688) (II) I810(0): xf86BindGARTMemory: bind key 6 at 0x072f8000 (pgoffset 29432) (WW) I810(0): Extended BIOS function 0x5f05 not supported. (WW) I810(0): Failed to set refresh rate to 75Hz. (II) I810(0): Display plane A is enabled. (II) I810(0): Display plane B is disabled. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): Mode bandwidth is 47 Mpixel/s (WW) I810(0): Extended BIOS function 0x5f28 not supported. (WW) I810(0): Extended BIOS function 0x5f61 not supported. (II) I810(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 16 128x128 slots 4 256x256 slots (==) I810(0): Backing store disabled (==) I810(0): Silken mouse enabled (II) I810(0): Initializing HW Cursor (**) Option "dpms" (**) I810(0): DPMS enabled (II) I810(0): X context handle = 0x00000001 (II) I810(0): [drm] installed DRM signal handler (II) I810(0): [DRI] installation complete (II) I810(0): direct rendering: Enabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "IMPS/2" (**) Mouse0: Protocol: "IMPS/2" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/psaux" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 5 (II) Keyboard "Keyboard0" handled by legacy driver (**) Option "Protocol" "IMPS/2" (**) DevInputMice: Protocol: "IMPS/2" (**) Option "AlwaysCore" (**) DevInputMice: always reports core events (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) DevInputMice: ZAxisMapping: buttons 4 and 5 (**) DevInputMice: Buttons: 5 (II) XINPUT: Adding extended input device "DevInputMice" (type: MOUSE) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) Mouse0: ps2EnableDataReporting: succeeded (II) DevInputMice: ps2EnableDataReporting: succeeded GetModeLine - scrn: 0 clock: 0 GetModeLine - hdsp: 1024 hbeg: 0 hend: 0 httl: 0 vdsp: 768 vbeg: 0 vend: 0 vttl: 0 flags: 0 ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-04 17:01 ` Stijn De Weirdt 2005-01-04 17:02 ` Stijn De Weirdt @ 2005-01-04 17:08 ` Ronald G. Minnich 2005-01-04 17:11 ` Stijn De Weirdt 2005-01-04 17:25 ` Ronald G. Minnich 2 siblings, 1 reply; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-04 17:08 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: xen-devel no attachment? ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-04 17:08 ` Ronald G. Minnich @ 2005-01-04 17:11 ` Stijn De Weirdt 0 siblings, 0 replies; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-04 17:11 UTC (permalink / raw) To: Ronald G. Minnich; +Cc: xen-devel [-- Attachment #1: Type: text/plain, Size: 164 bytes --] the unzipped waits moderator approval stijn On Tue, 4 Jan 2005 10:08:29 -0700 (MST), Ronald G. Minnich <rminnich@lanl.gov> wrote: > no attachment? > > ron > > [-- Attachment #2: XFree86.0.log.gz --] [-- Type: application/x-gzip, Size: 8191 bytes --] ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-04 17:01 ` Stijn De Weirdt 2005-01-04 17:02 ` Stijn De Weirdt 2005-01-04 17:08 ` Ronald G. Minnich @ 2005-01-04 17:25 ` Ronald G. Minnich 2005-01-05 9:44 ` Stijn De Weirdt 2 siblings, 1 reply; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-04 17:25 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: xen-devel On Tue, 4 Jan 2005, Stijn De Weirdt wrote: > On Tue, 4 Jan 2005 08:34:19 -0700 (MST), Ronald G. Minnich > <rminnich@lanl.gov> wrote: > > > (WW) I810(0): Bad V_BIOS checksum > > > > this is bad. It's a warning but it should not be happening. It means the > > vga bios checksum was wrong. Do you get this if you boot without xen, i.e. > > standard linux? > yes, it's actaully not that unfrequent. > > > > > (II) I810(0): Primary V_BIOS segment is: 0xc000 > > > (WW) System lacks support for changing MTRRs > > > (EE) I810(0): unknown type(0xffffffff)=0xff > > > i think this is much worse :) > > > I forget where this EE comes from, but: > > > (II) I810(0): EAX=0x00004f00, EBX=0x00000000, ECX=0x00000000, EDX=0x00000000 > > > (II) I810(0): ESP=0x00000ffa, EBP=0x00000000, ESI=0x00000000, EDI=0x00002000 > > > (II) I810(0): CS=0xc000, SS=0x0100, DS=0x0040, ES=0x0000, FS=0x0000, GS=0x0000 > > > (II) I810(0): EIP=0x00000014, EFLAGS=0x00003200 > > > (II) I810(0): code at 0x000c0014: > > > e9 0d 14 27 40 00 b0 0a 30 30 49 42 4d 20 56 47 > > > 41 20 43 6f 6d 70 61 74 69 62 6c 65 20 42 49 4f > > > (II) stack at 0x00001ffa: > > > 00 06 00 00 00 32 > > > (II) I810(0): VESA BIOS not detected > > This is the good one: (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) I810(0): initializing int10 (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 16192 kB (II) I810(0): VESA VBE OEM: Intel(r)865G Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r)865G Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): Integrated Graphics Chipset: Intel(R) 865G (--) I810(0): Chipset: "865G" So the checksum is wrong. But ... note that the VESA BIOS detected is not happening. I am pretty sure that what is going on is that the option rom is not getting mapped to 0xc0000 as required. I don't see how the MTRR failure should really matter in this case. One thing that might matter: Linux (without Xen) probably does not enable BIOS shadowing for the 0xc0000 region, and probably does not even now use it as RAM. But under Xen, is that 0xc0000 set up as RAM or ... I have no idea, I have not looked at this part of the linux modes -- a disadvantage to mainly having done Plan 9 work so far. I also vaguely remember you can try to invoke X and tell it to NOT try to run the vga bios, have you tried that? there is no real need to run it. Sorry, I'm doing too much guessing here, I hope this helps. ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-04 17:25 ` Ronald G. Minnich @ 2005-01-05 9:44 ` Stijn De Weirdt 2005-01-05 11:57 ` Ian Pratt 2005-01-05 16:26 ` Ronald G. Minnich 0 siblings, 2 replies; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-05 9:44 UTC (permalink / raw) To: Ronald G. Minnich; +Cc: xen-devel > > I am pretty sure that what is going on is that the option rom is not > getting mapped to 0xc0000 as required. I don't see how the MTRR failure > should really matter in this case. One thing that might matter: Linux > (without Xen) probably does not enable BIOS shadowing for the 0xc0000 > region, and probably does not even now use it as RAM. But under Xen, is > that 0xc0000 set up as RAM or ... I have no idea, I have not looked at > this part of the linux modes -- a disadvantage to mainly having done Plan > 9 work so far. is this what you are talking about? (taken from http://portolano.cs.washington.edu/projects/hydra/info/tech.html) More About the Kernel >From Power-On to Shell prompt When the power is turned on, the CPU can recognizes only first 8K of ROM and RAM and the on-chip RAM are not defined. The address of the 8K of ROM starts from 0x0. First, the reset vector is taken at address 0x04 and the CPU starts executing instructions from that address specified by reset vector. The bootup routine(arch/m68knommu/kernel/head.S) initializes the on-chip RAM and copies the instructions that initialize RAM and ROM to the onchip RAM and branches to the onchip RAM. After finishing setting up RAM and ROM, it jumps back to the ROM(now, ROM's starting address is changed to 0xc00000). Memory blocks are configured as in the table. is there a way i can do this myself (eg copy data from working system to file, start xen in runlevel 3, copy data to correct place, run startx) > > I also vaguely remember you can try to invoke X and tell it to NOT try to > run the vga bios, have you tried that? there is no real need to run it. from man i810 on my system: The driver makes use of the video BIOS to program video modes for the 830M and later. This limits the video modes that can be used to those provided by the video BIOS, and to those that will fit into the amount of video memory that the video BIOS is aware of. (mine is the 865G) > > Sorry, I'm doing too much guessing here, I hope this helps. > all small bits help > ron > stijn ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 9:44 ` Stijn De Weirdt @ 2005-01-05 11:57 ` Ian Pratt 2005-01-05 13:53 ` Stijn De Weirdt 2005-01-05 16:36 ` Ronald G. Minnich 2005-01-05 16:26 ` Ronald G. Minnich 1 sibling, 2 replies; 29+ messages in thread From: Ian Pratt @ 2005-01-05 11:57 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: Ronald G. Minnich, xen-devel, Ian.Pratt > I am pretty sure that what is going on is that the option rom is not > getting mapped to 0xc0000 as required. I don't see how the MTRR failure > should really matter in this case. One thing that might matter: Linux > (without Xen) probably does not enable BIOS shadowing for the 0xc0000 > region, and probably does not even now use it as RAM. If the driver is accessing the BIOS region via /dev/mem, it should be working as expected. What version of Xen are you using? 2.0.2 has a number of improvements as regards X support. Ian ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 11:57 ` Ian Pratt @ 2005-01-05 13:53 ` Stijn De Weirdt 2005-01-05 14:05 ` Stijn De Weirdt 2005-01-05 16:37 ` Ronald G. Minnich 2005-01-05 16:36 ` Ronald G. Minnich 1 sibling, 2 replies; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-05 13:53 UTC (permalink / raw) To: Ian Pratt; +Cc: xen-devel how can i find out if the driver uses /dev/mem? xen version is a testing version from 03/01/05 with 2.4.28 kernel i'll try 2.0.2 now stijn On Wed, 05 Jan 2005 11:57:57 +0000, Ian Pratt <Ian.Pratt@cl.cam.ac.uk> wrote: > > I am pretty sure that what is going on is that the option rom is not > > getting mapped to 0xc0000 as required. I don't see how the MTRR failure > > should really matter in this case. One thing that might matter: Linux > > (without Xen) probably does not enable BIOS shadowing for the 0xc0000 > > region, and probably does not even now use it as RAM. > > If the driver is accessing the BIOS region via /dev/mem, it > should be working as expected. > > What version of Xen are you using? 2.0.2 has a number of > improvements as regards X support. > > Ian > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 13:53 ` Stijn De Weirdt @ 2005-01-05 14:05 ` Stijn De Weirdt 2005-01-05 16:38 ` Ronald G. Minnich 2005-01-05 16:37 ` Ronald G. Minnich 1 sibling, 1 reply; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-05 14:05 UTC (permalink / raw) To: Ian Pratt; +Cc: xen-devel just tried 2.0.2 binary, same errors stijn On Wed, 5 Jan 2005 14:53:04 +0100, Stijn De Weirdt <stijn.deweirdt@gmail.com> wrote: > how can i find out if the driver uses /dev/mem? > > xen version is a testing version from 03/01/05 with 2.4.28 kernel > i'll try 2.0.2 now > > stijn > > > On Wed, 05 Jan 2005 11:57:57 +0000, Ian Pratt <Ian.Pratt@cl.cam.ac.uk> wrote: > > > I am pretty sure that what is going on is that the option rom is not > > > getting mapped to 0xc0000 as required. I don't see how the MTRR failure > > > should really matter in this case. One thing that might matter: Linux > > > (without Xen) probably does not enable BIOS shadowing for the 0xc0000 > > > region, and probably does not even now use it as RAM. > > > > If the driver is accessing the BIOS region via /dev/mem, it > > should be working as expected. > > > > What version of Xen are you using? 2.0.2 has a number of > > improvements as regards X support. > > > > Ian > > > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 14:05 ` Stijn De Weirdt @ 2005-01-05 16:38 ` Ronald G. Minnich 2005-01-05 17:15 ` Stijn De Weirdt 0 siblings, 1 reply; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-05 16:38 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: Ian Pratt, xen-devel what we might want to try is the testbios program from linuxbios, which is able to run the vga bios and will give pretty good debugging output. ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 16:38 ` Ronald G. Minnich @ 2005-01-05 17:15 ` Stijn De Weirdt 2005-01-05 18:30 ` Ronald G. Minnich 2005-01-05 19:24 ` Ian Pratt 0 siblings, 2 replies; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-05 17:15 UTC (permalink / raw) To: Ronald G. Minnich; +Cc: Ian Pratt, xen-devel on working machine 0000000 aa55 e951 987b 3030 3030 3030 3030 3030 on xen 0000000 0000 0000 0000 0000 0000 0000 0000 0000 stijn On Wed, 5 Jan 2005 09:38:15 -0700 (MST), Ronald G. Minnich <rminnich@lanl.gov> wrote: > what we might want to try is the testbios program from linuxbios, which is > able to run the vga bios and will give pretty good debugging output. > ron > > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 17:15 ` Stijn De Weirdt @ 2005-01-05 18:30 ` Ronald G. Minnich 2005-01-05 19:24 ` Ian Pratt 1 sibling, 0 replies; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-05 18:30 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: Ian Pratt, xen-devel On Wed, 5 Jan 2005, Stijn De Weirdt wrote: > on working machine > 0000000 aa55 e951 987b 3030 3030 3030 3030 3030 > > on xen > 0000000 0000 0000 0000 0000 0000 0000 0000 0000 > > stijn well you just found your problem. Now the question becomes, why do I have a vga bios image and you don't. I forget -- is this a laptop or a desktop? ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 17:15 ` Stijn De Weirdt 2005-01-05 18:30 ` Ronald G. Minnich @ 2005-01-05 19:24 ` Ian Pratt 2005-01-06 14:39 ` Stijn De Weirdt 1 sibling, 1 reply; 29+ messages in thread From: Ian Pratt @ 2005-01-05 19:24 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: Ronald G. Minnich, Ian Pratt, xen-devel > on working machine > 0000000 aa55 e951 987b 3030 3030 3030 3030 3030 > > on xen > 0000000 0000 0000 0000 0000 0000 0000 0000 0000 Bizarre. It's hard to see why this doesn't work. You are doing this within dom 0, right? Has you machine got a very strange e820 map or something? You might want to try 2.0-testing to see if that helps (there's new e820 Xen support). Ian ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 19:24 ` Ian Pratt @ 2005-01-06 14:39 ` Stijn De Weirdt 2005-01-06 15:19 ` Ronald G. Minnich 0 siblings, 1 reply; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-06 14:39 UTC (permalink / raw) To: Ian Pratt; +Cc: Ronald G. Minnich, xen-devel [-- Attachment #1: Type: text/plain, Size: 985 bytes --] the machine is a desktop, motherboard is a intel d865glc, 1GB ram, p4 just tried the latest xen-testing and xen-unstable and both give the same problem. for more sysinfo, i've added dmesg from xen0 and from my working kernel. if the problem is that /dev/mem doesn't has the correct info after booting xen0, maybe i can copy the info from my working system to some file, and then load this file in the memory of xen0. how big is the bios file (and what are the correct dd commands ;) ? stijn On Wed, 05 Jan 2005 19:24:36 +0000, Ian Pratt <Ian.Pratt@cl.cam.ac.uk> wrote: > > on working machine > > 0000000 aa55 e951 987b 3030 3030 3030 3030 3030 > > > > on xen > > 0000000 0000 0000 0000 0000 0000 0000 0000 0000 > > Bizarre. > > It's hard to see why this doesn't work. You are doing this within > dom 0, right? > > Has you machine got a very strange e820 map or something? You > might want to try 2.0-testing to see if that helps (there's new > e820 Xen support). > > Ian > > [-- Attachment #2: dmesg-xen0-2.0-testing-06-01-05 --] [-- Type: application/octet-stream, Size: 7310 bytes --] Linux version 2.4.28-xen0 (root@pc226.iihe.ac.be) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-42)) #1 Thu Jan 6 14:30:29 CET 2005 On node 0 totalpages: 131072 zone(0): 4096 pages. zone(1): 126976 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda8 ro console=tty0 Initializing CPU#0 Xen reported: 2992.645 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5976.88 BogoMIPS Memory: 506180k/524288k available (2286k kernel code, 18108k reserved, 683k data, 116k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 0K CPU: L2 cache: 1024K CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 POSIX conformance testing by UNIFIX PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Probing PCI hardware (bus 01) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Event-channel device installed. Xen virtual console successfully installed as ttyS xen_mem: Initialising balloon driver. Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.4.11-k1 Copyright (c) 1999-2004 Intel Corporation. pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de Intel(R) PRO/100 Network Driver - version 2.3.43-k1 Copyright (c) 2004 Intel Corporation PCI: Obtained IRQ 20 for device 01:08.0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Obtained IRQ 18 for device 00:1f.1 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 6Y080L0, ATA DISK drive hdc: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(100) hdc: attached ide-cdrom driver. hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver (1.1-3 Jan 6 2005 14:31:31) megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003) megaraid: no BIOS enabled. scsi0 : SCSI host adapter emulation for IDE ATAPI devices libata version 1.02 loaded. ata_piix version 1.02 PCI: Obtained IRQ 18 for device 00:1f.2 PCI: Setting latency timer of device 00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD800 irq 18 ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD808 irq 18 ata1: SATA port has no device. ata2: SATA port has no device. scsi1 : ata_piix scsi2 : ata_piix Initializing Cryptographic API Initialising Xen netif backend NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 131072 bind 65536) ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> RAMDISK: ext2 filesystem found at block 0 RAMDISK: image too big! (8000/4096 blocks) Freeing initrd memory: 8000k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 116k freed Real Time Clock Driver v1.10f usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 12:53:20 Jan 4 2005 usb-uhci.c: High bandwidth mode enabled PCI: Obtained IRQ 16 for device 00:1d.0 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Obtained IRQ 19 for device 00:1d.1 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Obtained IRQ 18 for device 00:1d.2 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 18 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Obtained IRQ 16 for device 00:1d.3 PCI: Setting latency timer of device 00:1d.3 to 64 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver PCI: Obtained IRQ 23 for device 00:1d.7 PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801EB USB2 ehci_hcd 00:1d.7: irq 23, pci mem e043ac00 usb.c: new USB bus registered, assigned bus number 5 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 128 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 8 ports detected usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal Adding Swap: 1952960k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ DETECT_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A SCSI subsystem driver Revision: 1.00 e100: eth0 NIC Link is Up 100 Mbps Full duplex [-- Attachment #3: dmesg-SL303-06-01-05 --] [-- Type: application/octet-stream, Size: 11051 bytes --] Linux version 2.4.21-20.0.1.EL.cern (root@lxcert-i386.cern.ch) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-42)) #1 Fri Dec 3 10:58:20 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ef2fc00 (usable) BIOS-e820: 000000003ef2fc00 - 000000003ef30000 (ACPI NVS) BIOS-e820: 000000003ef30000 - 000000003ef40000 (ACPI data) BIOS-e820: 000000003ef40000 - 000000003eff0000 (ACPI NVS) BIOS-e820: 000000003eff0000 - 000000003f000000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000e6000 - 0000000000100000 (reserved) user: 0000000000100000 - 000000003ef2fc00 (usable) user: 000000003ef2fc00 - 000000003ef30000 (ACPI NVS) user: 000000003ef30000 - 000000003ef40000 (ACPI data) user: 000000003ef40000 - 000000003eff0000 (ACPI NVS) user: 000000003eff0000 - 000000003f000000 (reserved) user: 00000000fecf0000 - 00000000fecf1000 (reserved) user: 00000000fed20000 - 00000000feda0000 (reserved) 111MB HIGHMEM available. 896MB LOWMEM available. NX protection not present; using segment protection On node 0 totalpages: 257839 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 28463 pages. Kernel command line: ro root=LABEL=/1 hdc=ide-scsi mem=1008M ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 2992.601 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5976.88 BogoMIPS Page-cache hash table entries: 262144 (order: 8, 1024 KB) Page-pin hash table entries: 65536 (order: 6, 256 KB) Dentry cache hash table entries: 131072 (order: 8, 1024 KB) Inode cache hash table entries: 65536 (order: 7, 512 KB) Buffer cache hash table entries: 65536 (order: 6, 256 KB) Memory: 1006932k/1031356k available (1603k kernel code, 20972k reserved, 1143k data, 168k init, 113852k highmem) zapping low mappings. kdb version 4.3 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Mount cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Process timing init...done. mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0 PCI: Found IRQ 10 for device 00:1f.1 PCI: Sharing IRQ 10 with 00:1d.2 PCI: Sharing IRQ 10 with 00:1f.2 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Total HugeTLB memory allocated, 0 Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 64459 aio_setup: sizeof(struct page) = 56 Hugetlbfs mounted. devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e NET4: Frame Diverter 0.46 RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Found IRQ 10 for device 00:1f.1 PCI: Sharing IRQ 10 with 00:1d.2 PCI: Sharing IRQ 10 with 00:1f.2 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 6Y080L0, ATA DISK drive blk: queue c043ea80, I/O limit 4095Mb (mask 0xffffffff) hdc: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 244k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 libata version 1.02 loaded. ata_piix version 1.02 PCI: Found IRQ 10 for device 00:1f.2 PCI: Sharing IRQ 10 with 00:1d.2 PCI: Sharing IRQ 10 with 00:1f.1 PCI: Setting latency timer of device 00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD800 irq 10 ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD808 irq 10 ata1: SATA port has no device. ata2: SATA port has no device. scsi0 : ata_piix scsi1 : ata_piix Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 168k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 11:19:44 Dec 3 2004 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 00:02.0 PCI: Sharing IRQ 11 with 00:1d.3 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 5 for device 00:1d.1 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 10 for device 00:1d.2 PCI: Sharing IRQ 10 with 00:1f.1 PCI: Sharing IRQ 10 with 00:1f.2 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.3 PCI: Sharing IRQ 11 with 00:02.0 PCI: Sharing IRQ 11 with 00:1d.0 PCI: Setting latency timer of device 00:1d.3 to 64 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver PCI: Found IRQ 9 for device 00:1d.7 PCI: Setting latency timer of device 00:1d.7 to 64 ehci-hcd 00:1d.7: Intel Corp. 82801EB USB2 ehci-hcd 00:1d.7: irq 9, pci mem f8894c00 usb.c: new USB bus registered, assigned bus number 5 ehci-hcd 00:1d.7: enabled 64bit PCI DMA PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. PCI: 00:1d.7 PCI cache line size corrected to 128. ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22 hub.c: USB hub found hub.c: 8 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal Adding Swap: 1952960k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. hdc: attached ide-scsi driver. scsi2 : SCSI host adapter emulation for IDE ATAPI devices Vendor: SONY Model: CD-RW CRX320E Rev: NYK4 Type: CD-ROM ANSI SCSI revision: 02 IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com> microcode: CPU0 updated from revision 0xe to 0x13, date = 07302004 parport0: PC-style at 0x378 [PCSPP,TRISTATE] Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 inserting floppy driver for 2.4.21-20.0.1.EL.cern Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Intel(R) PRO/100 Network Driver - version 2.3.43-k1 Copyright (c) 2004 Intel Corporation PCI: Found IRQ 9 for device 01:08.0 divert: allocating divert_blk for eth0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled divert: freeing divert_blk for eth0 ip_tables: (C) 2000-2002 Netfilter core team Intel(R) PRO/100 Network Driver - version 2.3.43-k1 Copyright (c) 2004 Intel Corporation PCI: Found IRQ 9 for device 01:08.0 divert: allocating divert_blk for eth0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled ip_tables: (C) 2000-2002 Netfilter core team e100: eth0 NIC Link is Up 100 Mbps Full duplex Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 925M agpgart: Detected an Intel(R) 865G Chipset. agpgart: Detected 16252K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 memory : f7abc180 memory : f7abc200 memory : f7abc280 [drm] AGP 0.99 Aperture @ 0xf0000000 128MB [drm] Initialized i830 1.3.2 20021108 on minor 0 mtrr: base(0xf0020000) is not aligned on a size(0x300000) boundary memory : f7abc380 memory : f7abc400 memory : f7abc480 memory : f7abc500 memory : f7abc580 PCI: Found IRQ 11 for device 00:02.0 PCI: Sharing IRQ 11 with 00:1d.0 PCI: Sharing IRQ 11 with 00:1d.3 ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-06 14:39 ` Stijn De Weirdt @ 2005-01-06 15:19 ` Ronald G. Minnich 0 siblings, 0 replies; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-06 15:19 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: Ian Pratt, xen-devel On Thu, 6 Jan 2005, Stijn De Weirdt wrote: > if the problem is that /dev/mem doesn't has the correct info after > booting xen0, maybe i can copy the info from my working system to some > file, and then load this file in the memory of xen0. how big is the > bios file (and what are the correct dd commands ;) ? you can possibly even hand the file to X11 and tell it to use that file as the bios image, not /dev/mem. not sure if X11 will let you do this; we do it with our bios emulator. ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 13:53 ` Stijn De Weirdt 2005-01-05 14:05 ` Stijn De Weirdt @ 2005-01-05 16:37 ` Ronald G. Minnich 1 sibling, 0 replies; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-05 16:37 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: Ian Pratt, xen-devel On Wed, 5 Jan 2005, Stijn De Weirdt wrote: > how can i find out if the driver uses /dev/mem? it's not really a "driver" as such. Use strace to see what it's doing. ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 11:57 ` Ian Pratt 2005-01-05 13:53 ` Stijn De Weirdt @ 2005-01-05 16:36 ` Ronald G. Minnich 1 sibling, 0 replies; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-05 16:36 UTC (permalink / raw) To: Ian Pratt; +Cc: Stijn De Weirdt, xen-devel On Wed, 5 Jan 2005, Ian Pratt wrote: > If the driver is accessing the BIOS region via /dev/mem, it > should be working as expected. there is a very easy way to test. dd if=/dev/mem bs=65536 skip=12 count=1 of=somefile hexdump the first 16 bytes of somefile and send it to me, there should be a bios signature in there. If not, that's an issue. Here's what I get on my two machines: 0000000 aa55 eb40 217b 0076 0000 0000 0000 0000 0000000 aa55 eb74 374b 3034 e930 194c cc77 4956 on my xen laptop I get this: 0000000 aa55 e960 04c7 0000 0000 0000 0000 0000 which is encouraging. What happens on your i810 machine? ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-05 9:44 ` Stijn De Weirdt 2005-01-05 11:57 ` Ian Pratt @ 2005-01-05 16:26 ` Ronald G. Minnich 1 sibling, 0 replies; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-05 16:26 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: xen-devel On Wed, 5 Jan 2005, Stijn De Weirdt wrote: > More About the Kernel From Power-On to Shell prompt When the power is > turned on, the CPU can recognizes only first 8K of ROM and RAM and the > on-chip RAM are not defined. The address of the 8K of ROM starts from > 0x0. First, the reset vector is taken at address 0x04 and the CPU starts > executing instructions from that address specified by reset vector. The > bootup routine(arch/m68knommu/kernel/head.S) initializes the on-chip RAM > and copies the instructions that initialize RAM and ROM to the onchip > RAM and branches to the onchip RAM. After finishing setting up RAM and > ROM, it jumps back to the ROM(now, ROM's starting address is changed to > 0xc00000). Memory blocks are configured as in the table. this is just 68k, i386 is utterly different. > > I also vaguely remember you can try to invoke X and tell it to NOT try to > > run the vga bios, have you tried that? there is no real need to run it. > from man i810 on my system: > The driver makes use of the video BIOS to program video modes for the > 830M and later. This limits the video modes that can be used to those > provided by the video BIOS, and to those that will fit into the amount > of video memory that the video BIOS is aware of. > (mine is the 865G) yes, but bios has done that. I have started X on several cards and told it not to run the vga bios and it works on some, not on others. ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* RE: intel agp card support 2
@ 2005-01-06 15:44 Ian Pratt
2005-01-06 15:51 ` Ronald G. Minnich
0 siblings, 1 reply; 29+ messages in thread
From: Ian Pratt @ 2005-01-06 15:44 UTC (permalink / raw)
To: Ronald G. Minnich, Stijn De Weirdt; +Cc: Ian Pratt, xen-devel
> On Thu, 6 Jan 2005, Stijn De Weirdt wrote:
>
> > if the problem is that /dev/mem doesn't has the correct info after
> > booting xen0, maybe i can copy the info from my working
> system to some
> > file, and then load this file in the memory of xen0. how big is the
> > bios file (and what are the correct dd commands ;) ?
>
> you can possibly even hand the file to X11 and tell it to use
> that file as
> the bios image, not /dev/mem.
>
> not sure if X11 will let you do this; we do it with our bios emulator.
This might get you a stage further, but it will fail as soon as the
driver tries to access the frame bufffer via /dev/mem. We really need to
get to the bottom of whis this is failing on your system. Please can you
post the output of 'xm dmesg'.
Does the system otherwise work? Can you start other VMs OK?
What's he *oldest* version of Xen you've tried this with? (i.e. have you
ever tried 2.0.1 or 2.0.0 ?)
Thanks,
Ian
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
^ permalink raw reply [flat|nested] 29+ messages in thread* RE: intel agp card support 2 2005-01-06 15:44 Ian Pratt @ 2005-01-06 15:51 ` Ronald G. Minnich 2005-01-06 16:36 ` Stijn De Weirdt 2005-01-06 17:58 ` Christian Limpach 0 siblings, 2 replies; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-06 15:51 UTC (permalink / raw) To: Ian Pratt; +Cc: Stijn De Weirdt, Ian Pratt, xen-devel On Thu, 6 Jan 2005, Ian Pratt wrote: > This might get you a stage further, but it will fail as soon as the > driver tries to access the frame bufffer via /dev/mem. We really need to > get to the bottom of whis this is failing on your system. Please can you > post the output of 'xm dmesg'. I should be clearer. What we do here is get vgabios into a file, and then tell our emulator to use the file as the 'C segment' but to use /dev/mem for everything else. In that way we init the physical hardware. X11 ought to do this but I do not know if they support the option it at this point. It's easy: our code is just mods to the X11 emulator. Is there any easy way to dump the mfn's for a guest -- that would tell us right away what is going on -- we should see pfn 0xc0 map to mfn 0xc0, i.e. dom 0 physical c0000 maps to vga bios at machine 0xc0000. This is where having /proc/sys/xen/dom/#/{mem,mfn,etc} would be VERY handy :-) ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-06 15:51 ` Ronald G. Minnich @ 2005-01-06 16:36 ` Stijn De Weirdt 2005-01-06 16:45 ` Andrew Warfield 2005-01-06 17:58 ` Christian Limpach 1 sibling, 1 reply; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-06 16:36 UTC (permalink / raw) To: Ronald G. Minnich; +Cc: Ian Pratt no output from xm dmesg. so something else must be wrong (and probably my fault ;) output from xm dmesg after xend start (111, 'Connection refused') Error: Error connecting to xend, is xend running? no so good /var/log/xend.log [2005-01-06 17:00:50 xend] INFO (SrvDaemon:607) Xend Daemon started /var/log/xend-debug.log xu_notifier_new() error connecting to xcs(ctrl)! (111) Traceback (most recent call last): File "/usr/sbin/xend", line 121, in ? sys.exit(main()) File "/usr/sbin/xend", line 107, in main return daemon.start() File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", line 522, in start self.run() File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", line 610, in run self.listenNotifier() File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", line 629, in listenNotifier p.startListening() File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", line 90, in startListening self._connectToProtocol() File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", line 108, in _connectToProtocol self.startReading() File "/usr/lib/python2.2/site-packages/twisted/internet/abstract.py", line 205 , in startReading self.reactor.addReader(self) File "/usr/lib/python2.2/site-packages/twisted/internet/pollreactor.py", line 89, in addReader self._updateRegistration(fd) File "/usr/lib/python2.2/site-packages/twisted/internet/pollreactor.py", line 52, in _updateRegistration poller.unregister(fd) ValueError: file descriptor cannot be a negative integer (-1) (i tried the writing to /dev/mem, and as ian guessed, it doesn't solve it) stijn On Thu, 6 Jan 2005 08:51:00 -0700 (MST), Ronald G. Minnich <rminnich@lanl.gov> wrote: > > > On Thu, 6 Jan 2005, Ian Pratt wrote: > > > This might get you a stage further, but it will fail as soon as the > > driver tries to access the frame bufffer via /dev/mem. We really need to > > get to the bottom of whis this is failing on your system. Please can you > > post the output of 'xm dmesg'. > > I should be clearer. What we do here is get vgabios into a file, and then > tell our emulator to use the file as the 'C segment' but to use /dev/mem > for everything else. In that way we init the physical hardware. X11 ought > to do this but I do not know if they support the option it at this point. > It's easy: our code is just mods to the X11 emulator. > > Is there any easy way to dump the mfn's for a guest -- that would tell us > right away what is going on -- we should see pfn 0xc0 map to mfn > 0xc0, i.e. dom 0 physical c0000 maps to vga bios at machine 0xc0000. > > This is where having /proc/sys/xen/dom/#/{mem,mfn,etc} would be VERY handy > :-) > > ron > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-06 16:36 ` Stijn De Weirdt @ 2005-01-06 16:45 ` Andrew Warfield 2005-01-06 17:36 ` Stijn De Weirdt 0 siblings, 1 reply; 29+ messages in thread From: Andrew Warfield @ 2005-01-06 16:45 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: Ronald G. Minnich, Ian Pratt If you are working out of the unstable tree you will need to reinstall the tools if you haven't done so since the end of last week. We've added a switch for control messages below xend, and the error looks a bit like it isn't running. a. On Thu, 6 Jan 2005 17:36:30 +0100, Stijn De Weirdt <stijn.deweirdt@gmail.com> wrote: > no output from xm dmesg. so something else must be wrong (and probably > my fault ;) > output from xm dmesg after xend start > > (111, 'Connection refused') > Error: Error connecting to xend, is xend running? > > no so good > > /var/log/xend.log > [2005-01-06 17:00:50 xend] INFO (SrvDaemon:607) Xend Daemon started > > /var/log/xend-debug.log > xu_notifier_new() > error connecting to xcs(ctrl)! (111) > Traceback (most recent call last): > File "/usr/sbin/xend", line 121, in ? > sys.exit(main()) > File "/usr/sbin/xend", line 107, in main > return daemon.start() > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 522, in start > self.run() > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 610, in run > self.listenNotifier() > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 629, in listenNotifier > p.startListening() > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 90, in startListening > self._connectToProtocol() > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 108, in _connectToProtocol > self.startReading() > File "/usr/lib/python2.2/site-packages/twisted/internet/abstract.py", line 205 > , in startReading > self.reactor.addReader(self) > File "/usr/lib/python2.2/site-packages/twisted/internet/pollreactor.py", line > 89, in addReader > self._updateRegistration(fd) > File "/usr/lib/python2.2/site-packages/twisted/internet/pollreactor.py", line > 52, in _updateRegistration > poller.unregister(fd) > ValueError: file descriptor cannot be a negative integer (-1) > > (i tried the writing to /dev/mem, and as ian guessed, it doesn't solve it) > > stijn > > On Thu, 6 Jan 2005 08:51:00 -0700 (MST), Ronald G. Minnich > <rminnich@lanl.gov> wrote: > > > > > > On Thu, 6 Jan 2005, Ian Pratt wrote: > > > > > This might get you a stage further, but it will fail as soon as the > > > driver tries to access the frame bufffer via /dev/mem. We really need to > > > get to the bottom of whis this is failing on your system. Please can you > > > post the output of 'xm dmesg'. > > > > I should be clearer. What we do here is get vgabios into a file, and then > > tell our emulator to use the file as the 'C segment' but to use /dev/mem > > for everything else. In that way we init the physical hardware. X11 ought > > to do this but I do not know if they support the option it at this point. > > It's easy: our code is just mods to the X11 emulator. > > > > Is there any easy way to dump the mfn's for a guest -- that would tell us > > right away what is going on -- we should see pfn 0xc0 map to mfn > > 0xc0, i.e. dom 0 physical c0000 maps to vga bios at machine 0xc0000. > > > > This is where having /proc/sys/xen/dom/#/{mem,mfn,etc} would be VERY handy > > :-) > > > > ron > > > > ------------------------------------------------------- > The SF.Net email is sponsored by: Beat the post-holiday blues > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xen-devel > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-06 16:45 ` Andrew Warfield @ 2005-01-06 17:36 ` Stijn De Weirdt 2005-01-06 18:01 ` Andrew Warfield 0 siblings, 1 reply; 29+ messages in thread From: Stijn De Weirdt @ 2005-01-06 17:36 UTC (permalink / raw) To: andrew.warfield; +Cc: Ronald G. Minnich, Ian Pratt i reinstalled the tools, this is from xm dmesg (the 2 cpu thing is very probably hyperthreading. i'll turn it off in bios if it is needed) stijn __ __ ____ ___ \ \/ /___ _ __ |___ \ / _ \ \ // _ \ '_ \ __) || | | | / \ __/ | | | / __/ | |_| | /_/\_\___|_| |_| |_____(_)___/ http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 2.0 (root@iihe.ac.be) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-42)) Thu Jan 6 14:28:31 CET 2005 Latest ChangeSet: information unavailable (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e6000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000003ef2fc00 (usable) (XEN) 000000003ef2fc00 - 000000003ef30000 (ACPI NVS) (XEN) 000000003ef30000 - 000000003ef40000 (ACPI data) (XEN) 000000003ef40000 - 000000003eff0000 (ACPI NVS) (XEN) 000000003eff0000 - 000000003f000000 (reserved) (XEN) 00000000fecf0000 - 00000000fecf1000 (reserved) (XEN) 00000000fed20000 - 00000000feda0000 (reserved) (XEN) System RAM: 1006MB (1030968kB) (XEN) Xen heap: 10MB (10756kB) (XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 (XEN) CPU#0: Physical ID: 0, Logical ID: 0 (XEN) CPU caps: bfebfbff 00000000 00000000 00000000 (XEN) found SMP MP-table at 000ff780 (XEN) ACPI: RSDP (v000 ACPIAM ) @ 0x000f61b0 (XEN) ACPI: RSDT (v001 INTEL D865GLC 0x20040622 MSFT 0x00000097) @ 0x3ef30000 (XEN) ACPI: FADT (v002 INTEL D865GLC 0x20040622 MSFT 0x00000097) @ 0x3ef30200 (XEN) ACPI: MADT (v001 INTEL D865GLC 0x20040622 MSFT 0x00000097) @ 0x3ef30300 (XEN) ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 MSFT 0x0100000d) @ 0x3ef345b0 (XEN) ACPI: TCPA (v001 INTEL TBLOEMID 0x00000001 MSFT 0x00000097) @ 0x3ef34649 (XEN) ACPI: WDDT (v001 INTEL OEMWDDT 0x00000001 MSFT 0x0100000d) @ 0x3ef3467d (XEN) ACPI: DSDT (v001 INTEL D865GLC 0x00000001 MSFT 0x0100000d) @ 0x00000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 Unknown CPU [15:3] APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 Unknown CPU [15:3] APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) (XEN) Using ACPI for processor (LAPIC) configuration information (XEN) Intel MultiProcessor Specification v1.4 (XEN) Virtual Wire compatibility mode. (XEN) OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000 (XEN) I/O APIC #2 Version 32 at 0xFEC00000. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Processors: 2 (XEN) Using scheduler: Borrowed Virtual Time (bvt) (XEN) Initializing CPU#0 (XEN) Detected 2992.634 MHz processor. (XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 (XEN) CPU#0: Physical ID: 0, Logical ID: 0 (XEN) CPU caps: bfebfbff 00000000 00000000 00000000 (XEN) CPU0 booted (XEN) enabled ExtINT on CPU#0 (XEN) ESR value before enabling vector: 00000000 (XEN) ESR value after enabling vector: 00000000 (XEN) Booting processor 1/1 eip 90000 (XEN) Initializing CPU#1 (XEN) masked ExtINT on CPU#1 (XEN) ESR value before enabling vector: 00000000 (XEN) ESR value after enabling vector: 00000000 (XEN) CPU1: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 (XEN) CPU#1: Physical ID: 0, Logical ID: 1 (XEN) CPU caps: bfebfbff 00000000 00000000 00000000 (XEN) CPU1 has booted. (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) Setting 2 in the phys_id_present_map (XEN) ...changing IO-APIC physical APIC ID to 2 ... ok. (XEN) init IO_APIC IRQs (XEN) ..TIMER: vector=0x41 pin1=2 pin2=0 (XEN) Using local APIC timer interrupts. (XEN) Calibrating APIC timer for CPU0... (XEN) ..... CPU speed is 2992.5762 MHz. (XEN) ..... Bus speed is 199.5050 MHz. (XEN) ..... bus_scale = 0x0000CC4F (XEN) checking TSC synchronization across CPUs: passed. (XEN) Time init: (XEN) .... System Time: 10701084ns (XEN) .... cpu_freq: 00000000:B25FF8F4 (XEN) .... scale: 00000001:562C68A6 (XEN) .... Wall Clock: 1105035408s 120000us (XEN) PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 (XEN) PCI: Using configuration type 1 (XEN) PCI: Probing PCI hardware (XEN) PCI: Probing PCI hardware (bus 00) (XEN) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 (XEN) Transparent bridge - PCI device 8086:244e (XEN) PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0 (XEN) PCI->APIC IRQ transform: (B0,I2,P0) -> 16 (XEN) PCI->APIC IRQ transform: (B0,I29,P0) -> 16 (XEN) PCI->APIC IRQ transform: (B0,I29,P1) -> 19 (XEN) PCI->APIC IRQ transform: (B0,I29,P2) -> 18 (XEN) PCI->APIC IRQ transform: (B0,I29,P0) -> 16 (XEN) PCI->APIC IRQ transform: (B0,I29,P3) -> 23 (XEN) PCI->APIC IRQ transform: (B0,I31,P0) -> 18 (XEN) PCI->APIC IRQ transform: (B0,I31,P0) -> 18 (XEN) PCI->APIC IRQ transform: (B0,I31,P1) -> 17 (XEN) PCI->APIC IRQ transform: (B1,I8,P0) -> 20 (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.4,XEN_VER=2.0,VIRT_BASE=0xC0000000' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Kernel image: 00c00000->00f0991c (XEN) Initrd image: 00f0a000->016da000 (XEN) Dom0 alloc.: 01800000->21800000 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c04528d4 (XEN) Init. ramdisk: c0453000->c0c23000 (XEN) Phys-Mach map: c0c23000->c0ca3000 (XEN) Page tables: c0ca3000->c0ca8000 (XEN) Start info: c0ca8000->c0ca9000 (XEN) Boot stack: c0ca9000->c0caa000 (XEN) TOTAL: c0000000->c1000000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Scrubbing DOM0 RAM: ......done. (XEN) Initrd len 0x7d0000, start at 0xc0453000 (XEN) Scrubbing Free RAM: ...........done. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). On Thu, 6 Jan 2005 16:45:52 +0000, Andrew Warfield <andrew.warfield@gmail.com> wrote: > If you are working out of the unstable tree you will need to reinstall > the tools if you haven't done so since the end of last week. We've > added a switch for control messages below xend, and the error looks a > bit like it isn't running. > > a. > > On Thu, 6 Jan 2005 17:36:30 +0100, Stijn De Weirdt > <stijn.deweirdt@gmail.com> wrote: > > no output from xm dmesg. so something else must be wrong (and probably > > my fault ;) > > output from xm dmesg after xend start > > > > (111, 'Connection refused') > > Error: Error connecting to xend, is xend running? > > > > no so good > > > > /var/log/xend.log > > [2005-01-06 17:00:50 xend] INFO (SrvDaemon:607) Xend Daemon started > > > > /var/log/xend-debug.log > > xu_notifier_new() > > error connecting to xcs(ctrl)! (111) > > Traceback (most recent call last): > > File "/usr/sbin/xend", line 121, in ? > > sys.exit(main()) > > File "/usr/sbin/xend", line 107, in main > > return daemon.start() > > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > > line 522, in start > > self.run() > > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > > line 610, in run > > self.listenNotifier() > > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > > line 629, in listenNotifier > > p.startListening() > > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > > line 90, in startListening > > self._connectToProtocol() > > File "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > > line 108, in _connectToProtocol > > self.startReading() > > File "/usr/lib/python2.2/site-packages/twisted/internet/abstract.py", line 205 > > , in startReading > > self.reactor.addReader(self) > > File "/usr/lib/python2.2/site-packages/twisted/internet/pollreactor.py", line > > 89, in addReader > > self._updateRegistration(fd) > > File "/usr/lib/python2.2/site-packages/twisted/internet/pollreactor.py", line > > 52, in _updateRegistration > > poller.unregister(fd) > > ValueError: file descriptor cannot be a negative integer (-1) > > > > (i tried the writing to /dev/mem, and as ian guessed, it doesn't solve it) > > > > stijn > > > > On Thu, 6 Jan 2005 08:51:00 -0700 (MST), Ronald G. Minnich > > <rminnich@lanl.gov> wrote: > > > > > > > > > On Thu, 6 Jan 2005, Ian Pratt wrote: > > > > > > > This might get you a stage further, but it will fail as soon as the > > > > driver tries to access the frame bufffer via /dev/mem. We really need to > > > > get to the bottom of whis this is failing on your system. Please can you > > > > post the output of 'xm dmesg'. > > > > > > I should be clearer. What we do here is get vgabios into a file, and then > > > tell our emulator to use the file as the 'C segment' but to use /dev/mem > > > for everything else. In that way we init the physical hardware. X11 ought > > > to do this but I do not know if they support the option it at this point. > > > It's easy: our code is just mods to the X11 emulator. > > > > > > Is there any easy way to dump the mfn's for a guest -- that would tell us > > > right away what is going on -- we should see pfn 0xc0 map to mfn > > > 0xc0, i.e. dom 0 physical c0000 maps to vga bios at machine 0xc0000. > > > > > > This is where having /proc/sys/xen/dom/#/{mem,mfn,etc} would be VERY handy > > > :-) > > > > > > ron > > > > > > > ------------------------------------------------------- > > The SF.Net email is sponsored by: Beat the post-holiday blues > > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. > > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/xen-devel > > > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-06 17:36 ` Stijn De Weirdt @ 2005-01-06 18:01 ` Andrew Warfield 0 siblings, 0 replies; 29+ messages in thread From: Andrew Warfield @ 2005-01-06 18:01 UTC (permalink / raw) To: Stijn De Weirdt; +Cc: Ronald G. Minnich, Ian Pratt The python bug you sent is independent of the video problems -- the control switch doesn't seem to be running. I'm looking at python dump that you sent: > error connecting to xcs(ctrl)! (111) do you see a process called xcs running in dom0? if not, can you run /usr/bin/xcs and send me any resulting errors? a. ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-06 15:51 ` Ronald G. Minnich 2005-01-06 16:36 ` Stijn De Weirdt @ 2005-01-06 17:58 ` Christian Limpach 2005-01-06 18:00 ` Ronald G. Minnich 1 sibling, 1 reply; 29+ messages in thread From: Christian Limpach @ 2005-01-06 17:58 UTC (permalink / raw) To: Ronald G. Minnich; +Cc: Ian Pratt, Stijn De Weirdt On Thu, Jan 06, 2005 at 08:51:00AM -0700, Ronald G. Minnich wrote: > Is there any easy way to dump the mfn's for a guest -- that would tell us > right away what is going on -- we should see pfn 0xc0 map to mfn > 0xc0, i.e. dom 0 physical c0000 maps to vga bios at machine 0xc0000. You could extend the guest's debug handler to print entries from the mfn<->pfn translation tables. christian ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: intel agp card support 2 2005-01-06 17:58 ` Christian Limpach @ 2005-01-06 18:00 ` Ronald G. Minnich 0 siblings, 0 replies; 29+ messages in thread From: Ronald G. Minnich @ 2005-01-06 18:00 UTC (permalink / raw) To: Christian Limpach; +Cc: Ian Pratt, Stijn De Weirdt On Thu, 6 Jan 2005, Christian Limpach wrote: > You could extend the guest's debug handler to print entries from the > mfn<->pfn translation tables. good idea, I need to work more with linux guests anyway, I will try to look at that. ron ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
* RE: intel agp card support 2 @ 2005-01-06 16:41 Ian Pratt 0 siblings, 0 replies; 29+ messages in thread From: Ian Pratt @ 2005-01-06 16:41 UTC (permalink / raw) To: Stijn De Weirdt, Ronald G. Minnich; +Cc: Ian Pratt, xen-devel > no output from xm dmesg. so something else must be wrong (and probably > my fault ;) > output from xm dmesg after xend start As you guessed, this is a totally different problem. Where did you get your python and twisted install from? What versions are they? It looks like some kind of internal error. I'd like to get this problem fixed and see the ouput of 'xm dmesg' and check that you're able to start domains before dwelling on the X problem. Ian > (111, 'Connection refused') > Error: Error connecting to xend, is xend running? > > no so good > > /var/log/xend.log > [2005-01-06 17:00:50 xend] INFO (SrvDaemon:607) Xend Daemon started > > /var/log/xend-debug.log > xu_notifier_new() > error connecting to xcs(ctrl)! (111) > Traceback (most recent call last): > File "/usr/sbin/xend", line 121, in ? > sys.exit(main()) > File "/usr/sbin/xend", line 107, in main > return daemon.start() > File > "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 522, in start > self.run() > File > "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 610, in run > self.listenNotifier() > File > "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 629, in listenNotifier > p.startListening() > File > "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 90, in startListening > self._connectToProtocol() > File > "/usr/lib/python2.2/site-packages/xen/xend/server/SrvDaemon.py", > line 108, in _connectToProtocol > self.startReading() > File > "/usr/lib/python2.2/site-packages/twisted/internet/abstract.py > ", line 205 > , in startReading > self.reactor.addReader(self) > File > "/usr/lib/python2.2/site-packages/twisted/internet/pollreactor > .py", line > 89, in addReader > self._updateRegistration(fd) > File > "/usr/lib/python2.2/site-packages/twisted/internet/pollreactor > .py", line > 52, in _updateRegistration > poller.unregister(fd) > ValueError: file descriptor cannot be a negative integer (-1) ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt ^ permalink raw reply [flat|nested] 29+ messages in thread
end of thread, other threads:[~2005-01-06 18:01 UTC | newest] Thread overview: 29+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-01-04 14:39 intel agp card support 2 Stijn De Weirdt 2005-01-04 15:34 ` Ronald G. Minnich 2005-01-04 17:01 ` Stijn De Weirdt 2005-01-04 17:02 ` Stijn De Weirdt 2005-01-04 17:08 ` Ronald G. Minnich 2005-01-04 17:11 ` Stijn De Weirdt 2005-01-04 17:25 ` Ronald G. Minnich 2005-01-05 9:44 ` Stijn De Weirdt 2005-01-05 11:57 ` Ian Pratt 2005-01-05 13:53 ` Stijn De Weirdt 2005-01-05 14:05 ` Stijn De Weirdt 2005-01-05 16:38 ` Ronald G. Minnich 2005-01-05 17:15 ` Stijn De Weirdt 2005-01-05 18:30 ` Ronald G. Minnich 2005-01-05 19:24 ` Ian Pratt 2005-01-06 14:39 ` Stijn De Weirdt 2005-01-06 15:19 ` Ronald G. Minnich 2005-01-05 16:37 ` Ronald G. Minnich 2005-01-05 16:36 ` Ronald G. Minnich 2005-01-05 16:26 ` Ronald G. Minnich -- strict thread matches above, loose matches on Subject: below -- 2005-01-06 15:44 Ian Pratt 2005-01-06 15:51 ` Ronald G. Minnich 2005-01-06 16:36 ` Stijn De Weirdt 2005-01-06 16:45 ` Andrew Warfield 2005-01-06 17:36 ` Stijn De Weirdt 2005-01-06 18:01 ` Andrew Warfield 2005-01-06 17:58 ` Christian Limpach 2005-01-06 18:00 ` Ronald G. Minnich 2005-01-06 16:41 Ian Pratt
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.