From: Nicolas Dufresne <nicolas.dufresne@collabora.com>
To: Sebastian Fricke <sebastian.fricke@collabora.com>,
Jonas Karlman <jonas@kwiboo.se>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Alex Bee <knaerzche@gmail.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Detlev Casanova <detlev.casanova@collabora.com>,
Dan Carpenter <dan.carpenter@linaro.org>,
linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 00/11] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support
Date: Fri, 25 Oct 2024 13:47:57 -0400 [thread overview]
Message-ID: <ab14cb57f3ef22c486afad9eb4aa9abec1b33dd2.camel@collabora.com> (raw)
In-Reply-To: <07674bcb4b7650c21bbb3dbe9855b2240444d4f3.camel@collabora.com>
Le vendredi 25 octobre 2024 à 08:54 -0400, Nicolas Dufresne a écrit :
> Le vendredi 25 octobre 2024 à 12:30 +0200, Sebastian Fricke a écrit :
> > Hey Jonas,
> >
> > On 25.10.2024 10:20, Jonas Karlman wrote:
> > > Hi Sebastian,
> > >
> > > Will you have time to look at this series any time soon?
> > >
> > > Would like to send a v2 of the now one year old rkvdec hevc series but
> > > this series is sort of holding that back ;-)
> >
> > Sorry for the delay we (maintainer & reviewer from Collabora) are
> > currently a bit busy, this is on top of our review list however, so
> > please another 1 or 2 weeks of patience :).
>
> Actually, I'll go over it today.
I'm done, there is only cosmetic comment, if you respin quickly, I'm sure we can
get this one in soon.
>
> regards,
> Nicolas
>
> >
> > >
> > > Regards,
> > > Jonas
> >
> > Thanks for your work and regards!
> > Sebastian
> >
> > >
> > > On 2024-09-09 21:24, Jonas Karlman wrote:
> > > > This series add H.264 High 10 and 4:2:2 profile support to the Rockchip
> > > > Video Decoder driver.
> > > >
> > > > Patch 1 add helpers for calculating plane bytesperline and sizeimage.
> > > > Patch 2 add two new pixelformats for semi-planer 10-bit 4:2:0/4:2:2 YUV.
> > > >
> > > > Patch 3 change to use bytesperline and buffer height to configure strides.
> > > > Patch 4 change to use values from SPS/PPS control to configure the HW.
> > > >
> > > > Patch 5-9 refactor code to support filtering of CAPUTRE formats based
> > > > on the image format returned from a get_image_fmt ops.
> > > >
> > > > Patch 10 add final bits to support H.264 High 10 and 4:2:2 profiles.
> > > >
> > > > Patch 11 add a fix for enumerated frame sizes returned to userspace.
> > > >
> > > > Tested on a ROCK Pi 4 (RK3399) and Rock64 (RK3328):
> > > >
> > > > v4l2-compliance 1.28.1, 64 bits, 64-bit time_t
> > > > ...
> > > > Total for rkvdec device /dev/video1: 48, Succeeded: 48, Failed: 0, Warnings: 0
> > > >
> > > > Running test suite JVT-FR-EXT with decoder FFmpeg-H.264-v4l2request
> > > > ...
> > > > Ran 65/69 tests successfully
> > > >
> > > > Running test suite JVT-AVC_V1 with decoder FFmpeg-H.264-v4l2request
> > > > ...
> > > > Ran 129/135 tests successfully
> > > >
> > > > Before this series:
> > > >
> > > > Running test suite JVT-FR-EXT with decoder FFmpeg-H.264-v4l2request
> > > > ...
> > > > Ran 44/69 tests successfully
> > > >
> > > > Changes in v6:
> > > > - Change to use fmt_idx instead of j++ tucked inside a condition (Dan)
> > > > - Add patch to fix enumerated frame sizes returned to userspace (Alex)
> > > > - Fluster test score is same as v4 and v5, see [4] and [5]
> > > > Link to v5: https://lore.kernel.org/linux-media/20240618194647.742037-1-jonas@kwiboo.se/
> > > >
> > > > Changes in v5:
> > > > - Drop Remove SPS validation at streaming start patch
> > > > - Move buffer align from rkvdec_fill_decoded_pixfmt to min/step_width
> > > > - Use correct profiles for V4L2_CID_MPEG_VIDEO_H264_PROFILE
> > > > - Collect r-b and t-b tags
> > > > - Fluster test score is same as v4, see [4] and [5]
> > > > Link to v4: https://lore.kernel.org/linux-media/20231105165521.3592037-1-jonas@kwiboo.se/
> > > >
> > > > Changes in v4:
> > > > - Fix failed v4l2-compliance tests related to CAPTURE queue
> > > > - Rework CAPTURE format filter anv validate to use an image format
> > > > - Run fluster test suite JVT-FR-EXT [4] and JVT-AVC_V1 [5]
> > > > Link to v3: https://lore.kernel.org/linux-media/20231029183427.1781554-1-jonas@kwiboo.se/
> > > >
> > > > Changes in v3:
> > > > - Drop merged patches
> > > > - Use bpp and bpp_div instead of prior misuse of block_w/block_h
> > > > - New patch to use values from SPS/PPS control to configure the HW
> > > > - New patch to remove an unnecessary call to validate sps at streaming start
> > > > - Reworked pixel format validation
> > > > Link to v2: https://lore.kernel.org/linux-media/20200706215430.22859-1-jonas@kwiboo.se/
> > > >
> > > > Changes in v2:
> > > > - Collect r-b tags
> > > > - SPS pic width and height in mbs validation moved to rkvdec_try_ctrl
> > > > - New patch to not override output buffer sizeimage
> > > > - Reworked pixel format validation
> > > > - Only align decoded buffer instead of changing frmsize step_width
> > > > Link to v1: https://lore.kernel.org/linux-media/20200701215616.30874-1-jonas@kwiboo.se/
> > > >
> > > > To fully runtime test this series you may need FFmpeg patches from [1]
> > > > and fluster patches from [2], this series is also available at [3].
> > > >
> > > > [1] https://github.com/Kwiboo/FFmpeg/commits/v4l2request-2024-v2-rkvdec/
> > > > [2] https://github.com/Kwiboo/fluster/commits/ffmpeg-v4l2request-rkvdec/
> > > > [3] https://github.com/Kwiboo/linux-rockchip/commits/linuxtv-rkvdec-high-10-v6/
> > > > [4] https://gist.github.com/Kwiboo/f4ac15576b2c72887ae2bc5d58b5c865
> > > > [5] https://gist.github.com/Kwiboo/459a1c8f1dcb56e45dc7a7a29cc28adf
> > > >
> > > > Regards,
> > > > Jonas
> > > >
> > > > Alex Bee (1):
> > > > media: rkvdec: h264: Don't hardcode SPS/PPS parameters
> > > >
> > > > Jonas Karlman (10):
> > > > media: v4l2-common: Add helpers to calculate bytesperline and
> > > > sizeimage
> > > > media: v4l2: Add NV15 and NV20 pixel formats
> > > > media: rkvdec: h264: Use bytesperline and buffer height as virstride
> > > > media: rkvdec: Extract rkvdec_fill_decoded_pixfmt into helper
> > > > media: rkvdec: Move rkvdec_reset_decoded_fmt helper
> > > > media: rkvdec: Extract decoded format enumeration into helper
> > > > media: rkvdec: Add image format concept
> > > > media: rkvdec: Add get_image_fmt ops
> > > > media: rkvdec: h264: Support High 10 and 4:2:2 profiles
> > > > media: rkvdec: Fix enumerate frame sizes
> > > >
> > > > .../media/v4l/pixfmt-yuv-planar.rst | 128 ++++++++++
> > > > drivers/media/v4l2-core/v4l2-common.c | 80 +++---
> > > > drivers/media/v4l2-core/v4l2-ioctl.c | 2 +
> > > > drivers/staging/media/rkvdec/rkvdec-h264.c | 64 +++--
> > > > drivers/staging/media/rkvdec/rkvdec.c | 239 +++++++++++++-----
> > > > drivers/staging/media/rkvdec/rkvdec.h | 18 +-
> > > > include/uapi/linux/videodev2.h | 2 +
> > > > 7 files changed, 410 insertions(+), 123 deletions(-)
> > > >
> > >
> > >
> > Sebastian Fricke
> > Consultant Software Engineer
> >
> > Collabora Ltd
> > Platinum Building, St John's Innovation Park, Cambridge CB4 0DS, UK
> > Registered in England & Wales no 5513718.
>
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Dufresne <nicolas.dufresne@collabora.com>
To: Sebastian Fricke <sebastian.fricke@collabora.com>,
Jonas Karlman <jonas@kwiboo.se>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Alex Bee <knaerzche@gmail.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Detlev Casanova <detlev.casanova@collabora.com>,
Dan Carpenter <dan.carpenter@linaro.org>,
linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 00/11] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support
Date: Fri, 25 Oct 2024 13:47:57 -0400 [thread overview]
Message-ID: <ab14cb57f3ef22c486afad9eb4aa9abec1b33dd2.camel@collabora.com> (raw)
In-Reply-To: <07674bcb4b7650c21bbb3dbe9855b2240444d4f3.camel@collabora.com>
Le vendredi 25 octobre 2024 à 08:54 -0400, Nicolas Dufresne a écrit :
> Le vendredi 25 octobre 2024 à 12:30 +0200, Sebastian Fricke a écrit :
> > Hey Jonas,
> >
> > On 25.10.2024 10:20, Jonas Karlman wrote:
> > > Hi Sebastian,
> > >
> > > Will you have time to look at this series any time soon?
> > >
> > > Would like to send a v2 of the now one year old rkvdec hevc series but
> > > this series is sort of holding that back ;-)
> >
> > Sorry for the delay we (maintainer & reviewer from Collabora) are
> > currently a bit busy, this is on top of our review list however, so
> > please another 1 or 2 weeks of patience :).
>
> Actually, I'll go over it today.
I'm done, there is only cosmetic comment, if you respin quickly, I'm sure we can
get this one in soon.
>
> regards,
> Nicolas
>
> >
> > >
> > > Regards,
> > > Jonas
> >
> > Thanks for your work and regards!
> > Sebastian
> >
> > >
> > > On 2024-09-09 21:24, Jonas Karlman wrote:
> > > > This series add H.264 High 10 and 4:2:2 profile support to the Rockchip
> > > > Video Decoder driver.
> > > >
> > > > Patch 1 add helpers for calculating plane bytesperline and sizeimage.
> > > > Patch 2 add two new pixelformats for semi-planer 10-bit 4:2:0/4:2:2 YUV.
> > > >
> > > > Patch 3 change to use bytesperline and buffer height to configure strides.
> > > > Patch 4 change to use values from SPS/PPS control to configure the HW.
> > > >
> > > > Patch 5-9 refactor code to support filtering of CAPUTRE formats based
> > > > on the image format returned from a get_image_fmt ops.
> > > >
> > > > Patch 10 add final bits to support H.264 High 10 and 4:2:2 profiles.
> > > >
> > > > Patch 11 add a fix for enumerated frame sizes returned to userspace.
> > > >
> > > > Tested on a ROCK Pi 4 (RK3399) and Rock64 (RK3328):
> > > >
> > > > v4l2-compliance 1.28.1, 64 bits, 64-bit time_t
> > > > ...
> > > > Total for rkvdec device /dev/video1: 48, Succeeded: 48, Failed: 0, Warnings: 0
> > > >
> > > > Running test suite JVT-FR-EXT with decoder FFmpeg-H.264-v4l2request
> > > > ...
> > > > Ran 65/69 tests successfully
> > > >
> > > > Running test suite JVT-AVC_V1 with decoder FFmpeg-H.264-v4l2request
> > > > ...
> > > > Ran 129/135 tests successfully
> > > >
> > > > Before this series:
> > > >
> > > > Running test suite JVT-FR-EXT with decoder FFmpeg-H.264-v4l2request
> > > > ...
> > > > Ran 44/69 tests successfully
> > > >
> > > > Changes in v6:
> > > > - Change to use fmt_idx instead of j++ tucked inside a condition (Dan)
> > > > - Add patch to fix enumerated frame sizes returned to userspace (Alex)
> > > > - Fluster test score is same as v4 and v5, see [4] and [5]
> > > > Link to v5: https://lore.kernel.org/linux-media/20240618194647.742037-1-jonas@kwiboo.se/
> > > >
> > > > Changes in v5:
> > > > - Drop Remove SPS validation at streaming start patch
> > > > - Move buffer align from rkvdec_fill_decoded_pixfmt to min/step_width
> > > > - Use correct profiles for V4L2_CID_MPEG_VIDEO_H264_PROFILE
> > > > - Collect r-b and t-b tags
> > > > - Fluster test score is same as v4, see [4] and [5]
> > > > Link to v4: https://lore.kernel.org/linux-media/20231105165521.3592037-1-jonas@kwiboo.se/
> > > >
> > > > Changes in v4:
> > > > - Fix failed v4l2-compliance tests related to CAPTURE queue
> > > > - Rework CAPTURE format filter anv validate to use an image format
> > > > - Run fluster test suite JVT-FR-EXT [4] and JVT-AVC_V1 [5]
> > > > Link to v3: https://lore.kernel.org/linux-media/20231029183427.1781554-1-jonas@kwiboo.se/
> > > >
> > > > Changes in v3:
> > > > - Drop merged patches
> > > > - Use bpp and bpp_div instead of prior misuse of block_w/block_h
> > > > - New patch to use values from SPS/PPS control to configure the HW
> > > > - New patch to remove an unnecessary call to validate sps at streaming start
> > > > - Reworked pixel format validation
> > > > Link to v2: https://lore.kernel.org/linux-media/20200706215430.22859-1-jonas@kwiboo.se/
> > > >
> > > > Changes in v2:
> > > > - Collect r-b tags
> > > > - SPS pic width and height in mbs validation moved to rkvdec_try_ctrl
> > > > - New patch to not override output buffer sizeimage
> > > > - Reworked pixel format validation
> > > > - Only align decoded buffer instead of changing frmsize step_width
> > > > Link to v1: https://lore.kernel.org/linux-media/20200701215616.30874-1-jonas@kwiboo.se/
> > > >
> > > > To fully runtime test this series you may need FFmpeg patches from [1]
> > > > and fluster patches from [2], this series is also available at [3].
> > > >
> > > > [1] https://github.com/Kwiboo/FFmpeg/commits/v4l2request-2024-v2-rkvdec/
> > > > [2] https://github.com/Kwiboo/fluster/commits/ffmpeg-v4l2request-rkvdec/
> > > > [3] https://github.com/Kwiboo/linux-rockchip/commits/linuxtv-rkvdec-high-10-v6/
> > > > [4] https://gist.github.com/Kwiboo/f4ac15576b2c72887ae2bc5d58b5c865
> > > > [5] https://gist.github.com/Kwiboo/459a1c8f1dcb56e45dc7a7a29cc28adf
> > > >
> > > > Regards,
> > > > Jonas
> > > >
> > > > Alex Bee (1):
> > > > media: rkvdec: h264: Don't hardcode SPS/PPS parameters
> > > >
> > > > Jonas Karlman (10):
> > > > media: v4l2-common: Add helpers to calculate bytesperline and
> > > > sizeimage
> > > > media: v4l2: Add NV15 and NV20 pixel formats
> > > > media: rkvdec: h264: Use bytesperline and buffer height as virstride
> > > > media: rkvdec: Extract rkvdec_fill_decoded_pixfmt into helper
> > > > media: rkvdec: Move rkvdec_reset_decoded_fmt helper
> > > > media: rkvdec: Extract decoded format enumeration into helper
> > > > media: rkvdec: Add image format concept
> > > > media: rkvdec: Add get_image_fmt ops
> > > > media: rkvdec: h264: Support High 10 and 4:2:2 profiles
> > > > media: rkvdec: Fix enumerate frame sizes
> > > >
> > > > .../media/v4l/pixfmt-yuv-planar.rst | 128 ++++++++++
> > > > drivers/media/v4l2-core/v4l2-common.c | 80 +++---
> > > > drivers/media/v4l2-core/v4l2-ioctl.c | 2 +
> > > > drivers/staging/media/rkvdec/rkvdec-h264.c | 64 +++--
> > > > drivers/staging/media/rkvdec/rkvdec.c | 239 +++++++++++++-----
> > > > drivers/staging/media/rkvdec/rkvdec.h | 18 +-
> > > > include/uapi/linux/videodev2.h | 2 +
> > > > 7 files changed, 410 insertions(+), 123 deletions(-)
> > > >
> > >
> > >
> > Sebastian Fricke
> > Consultant Software Engineer
> >
> > Collabora Ltd
> > Platinum Building, St John's Innovation Park, Cambridge CB4 0DS, UK
> > Registered in England & Wales no 5513718.
>
>
next prev parent reply other threads:[~2024-10-25 18:25 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-09 19:24 [PATCH v6 00/11] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support Jonas Karlman
2024-09-09 19:24 ` Jonas Karlman
2024-09-09 19:24 ` [PATCH v6 01/11] media: v4l2-common: Add helpers to calculate bytesperline and sizeimage Jonas Karlman
2024-09-09 19:24 ` Jonas Karlman
2024-10-25 17:20 ` Nicolas Dufresne
2024-10-25 17:20 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 02/11] media: v4l2: Add NV15 and NV20 pixel formats Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-10-25 17:31 ` Nicolas Dufresne
2024-10-25 17:31 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 03/11] media: rkvdec: h264: Use bytesperline and buffer height as virstride Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 04/11] media: rkvdec: h264: Don't hardcode SPS/PPS parameters Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 05/11] media: rkvdec: Extract rkvdec_fill_decoded_pixfmt into helper Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 06/11] media: rkvdec: Move rkvdec_reset_decoded_fmt helper Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 07/11] media: rkvdec: Extract decoded format enumeration into helper Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-09-09 19:25 ` [PATCH v6 08/11] media: rkvdec: Add image format concept Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-09-10 9:41 ` Dan Carpenter
2024-09-10 9:41 ` Dan Carpenter
2024-10-25 17:36 ` Nicolas Dufresne
2024-10-25 17:36 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 09/11] media: rkvdec: Add get_image_fmt ops Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-10-25 17:38 ` Nicolas Dufresne
2024-10-25 17:38 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 10/11] media: rkvdec: h264: Support High 10 and 4:2:2 profiles Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-10-25 17:45 ` Nicolas Dufresne
2024-10-25 17:45 ` Nicolas Dufresne
2024-09-09 19:25 ` [PATCH v6 11/11] media: rkvdec: Fix enumerate frame sizes Jonas Karlman
2024-09-09 19:25 ` Jonas Karlman
2024-10-25 17:46 ` Nicolas Dufresne
2024-10-25 17:46 ` Nicolas Dufresne
2024-10-03 12:23 ` [PATCH v6 00/11] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support Diederik de Haas
2024-10-03 12:23 ` Diederik de Haas
2024-10-25 8:20 ` Jonas Karlman
2024-10-25 8:20 ` Jonas Karlman
2024-10-25 10:30 ` Sebastian Fricke
2024-10-25 10:30 ` Sebastian Fricke
2024-10-25 12:54 ` Nicolas Dufresne
2024-10-25 12:54 ` Nicolas Dufresne
2024-10-25 17:47 ` Nicolas Dufresne [this message]
2024-10-25 17:47 ` Nicolas Dufresne
2024-10-25 20:13 ` Jonas Karlman
2024-10-25 20:13 ` Jonas Karlman
2024-11-07 15:11 ` Nicolas Dufresne
2024-11-07 15:11 ` Nicolas Dufresne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ab14cb57f3ef22c486afad9eb4aa9abec1b33dd2.camel@collabora.com \
--to=nicolas.dufresne@collabora.com \
--cc=benjamin.gaignard@collabora.com \
--cc=dan.carpenter@linaro.org \
--cc=detlev.casanova@collabora.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=jonas@kwiboo.se \
--cc=knaerzche@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=sebastian.fricke@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.