[PATCH v10 0/3] Add support for Cix Sky1 resets

[PATCH v10 0/3] Add support for Cix Sky1 resets

[Gary Yang]

Patch 1: Add yaml file for Cix Sky1 resets
Patch 2: Add driver codes for Cix Sky1 resets
Patch 3: Add dts nodes for Cix Sky1 resets

v10 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- rename dt-bindings header file

v9 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver

v8 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- remove "simple-mfd" strings

v7 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- fix build warning

v6 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-control.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- fix dt-bindings style

v5 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-system-controller.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- refine reset driver
- fix dt-bindings style

v4 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- add syscon
- refine reset driver
- fix dt-bindings style

v3 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- remove syscon

v2 changes:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
scripts/checkpatch.pl 000*.patch
- fix dt-bindings style
- refine reset driver

Gary Yang (3):
  dt-bindings: soc: cix: document the syscon on Sky1 SoC
  reset: add Sky1 soc reset support
  arm64: dts: cix: add support for cix sky1 resets

 .../soc/cix/cix,sky1-system-control.yaml      |  42 ++
 arch/arm64/boot/dts/cix/sky1.dtsi             |  12 +
 drivers/reset/Kconfig                         |   7 +
 drivers/reset/Makefile                        |   1 +
 drivers/reset/reset-sky1.c                    | 367 ++++++++++++++++++
 .../reset/cix,sky1-s5-system-control.h        | 163 ++++++++
 .../reset/cix,sky1-system-control.h           |  41 ++
 7 files changed, 633 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
 create mode 100644 drivers/reset/reset-sky1.c
 create mode 100644 include/dt-bindings/reset/cix,sky1-s5-system-control.h
 create mode 100644 include/dt-bindings/reset/cix,sky1-system-control.h

-- 
2.49.0

[PATCH v10 1/3] dt-bindings: soc: cix: document the syscon on Sky1 SoC

[Gary Yang]

There are two system control on Cix sky1 Soc. One is located in S0 domain,
and the other is located in S5 domain. The system control contains resets,
usb typeC and more. At this point, only the reset controller is embedded
as usb typeC uses it by phandle.

Signed-off-by: Gary Yang <gary.yang@cixtech.com>
---
 .../soc/cix/cix,sky1-system-control.yaml      |  42 +++++
 .../reset/cix,sky1-s5-system-control.h        | 163 ++++++++++++++++++
 .../reset/cix,sky1-system-control.h           |  41 +++++
 3 files changed, 246 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
 create mode 100644 include/dt-bindings/reset/cix,sky1-s5-system-control.h
 create mode 100644 include/dt-bindings/reset/cix,sky1-system-control.h

diff --git a/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
new file mode 100644
index 000000000000..a01a515222c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/cix/cix,sky1-system-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cix Sky1 SoC system control register region
+
+maintainers:
+  - Gary Yang <gary.yang@cixtech.com>
+
+description:
+  An wide assortment of registers of the system controller on Sky1 SoC,
+  including resets, usb, wakeup sources and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - cix,sky1-system-control
+          - cix,sky1-s5-system-control
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@4160000 {
+      compatible = "cix,sky1-system-control", "syscon";
+      reg = <0x4160000 0x100>;
+      #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/reset/cix,sky1-s5-system-control.h b/include/dt-bindings/reset/cix,sky1-s5-system-control.h
new file mode 100644
index 000000000000..808bbcbe0c98
--- /dev/null
+++ b/include/dt-bindings/reset/cix,sky1-s5-system-control.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Author: Jerry Zhu <jerry.zhu@cixtech.com> */
+#ifndef DT_BINDING_RESET_CIX_SKY1_S5_SYSTEM_CONTROL_H
+#define DT_BINDING_RESET_CIX_SKY1_S5_SYSTEM_CONTROL_H
+
+/* reset for csu_pm */
+#define SKY1_CSU_PM_RESET_N		0
+#define SKY1_SENSORFUSION_RESET_N	1
+#define SKY1_SENSORFUSION_NOC_RESET_N	2
+
+/* reset group0 for s0 domain modules */
+#define SKY1_DDRC_RESET_N		3
+#define SKY1_GIC_RESET_N		4
+#define SKY1_CI700_RESET_N		5
+#define SKY1_SYS_NI700_RESET_N		6
+#define SKY1_MM_NI700_RESET_N		7
+#define SKY1_PCIE_NI700_RESET_N		8
+#define SKY1_GPU_RESET_N		9
+#define SKY1_NPUTOP_RESET_N		10
+#define SKY1_NPUCORE0_RESET_N		11
+#define SKY1_NPUCORE1_RESET_N		12
+#define SKY1_NPUCORE2_RESET_N		13
+#define SKY1_VPU_RESET_N		14
+#define SKY1_ISP_SRESET_N		15
+#define SKY1_ISP_ARESET_N		16
+#define SKY1_ISP_HRESET_N		17
+#define SKY1_ISP_GDCRESET_N		18
+#define SKY1_DPU_RESET0_N		19
+#define SKY1_DPU_RESET1_N		20
+#define SKY1_DPU_RESET2_N		21
+#define SKY1_DPU_RESET3_N		22
+#define SKY1_DPU_RESET4_N		23
+#define SKY1_DP_RESET0_N		24
+#define SKY1_DP_RESET1_N		25
+#define SKY1_DP_RESET2_N		26
+#define SKY1_DP_RESET3_N		27
+#define SKY1_DP_RESET4_N		28
+#define SKY1_DP_PHY_RST_N		29
+
+/* reset group1 for s0 domain modules */
+#define SKY1_AUDIO_HIFI5_RESET_N	30
+#define SKY1_AUDIO_HIFI5_NOC_RESET_N	31
+#define SKY1_CSIDPHY_PRST0_N		32
+#define SKY1_CSIDPHY_CMNRST0_N		33
+#define SKY1_CSI0_RST_N			34
+#define SKY1_CSIDPHY_PRST1_N		35
+#define SKY1_CSIDPHY_CMNRST1_N		36
+#define SKY1_CSI1_RST_N			37
+#define SKY1_CSI2_RST_N			38
+#define SKY1_CSI3_RST_N			39
+#define SKY1_CSIBRDGE0_RST_N		40
+#define SKY1_CSIBRDGE1_RST_N		41
+#define SKY1_CSIBRDGE2_RST_N		42
+#define SKY1_CSIBRDGE3_RST_N		43
+#define SKY1_GMAC0_RST_N		44
+#define SKY1_GMAC1_RST_N		45
+#define SKY1_PCIE0_RESET_N		46
+#define SKY1_PCIE1_RESET_N		47
+#define SKY1_PCIE2_RESET_N		48
+#define SKY1_PCIE3_RESET_N		49
+#define SKY1_PCIE4_RESET_N		50
+
+/* reset group1 for usb phys */
+#define SKY1_USB_DP_PHY0_PRST_N		51
+#define SKY1_USB_DP_PHY1_PRST_N		52
+#define SKY1_USB_DP_PHY2_PRST_N		53
+#define SKY1_USB_DP_PHY3_PRST_N		54
+#define SKY1_USB_DP_PHY0_RST_N		55
+#define SKY1_USB_DP_PHY1_RST_N		56
+#define SKY1_USB_DP_PHY2_RST_N		57
+#define SKY1_USB_DP_PHY3_RST_N		58
+#define SKY1_USBPHY_SS_PST_N		59
+#define SKY1_USBPHY_SS_RST_N		60
+#define SKY1_USBPHY_HS0_PRST_N		61
+#define SKY1_USBPHY_HS1_PRST_N		62
+#define SKY1_USBPHY_HS2_PRST_N		63
+#define SKY1_USBPHY_HS3_PRST_N		64
+#define SKY1_USBPHY_HS4_PRST_N		65
+#define SKY1_USBPHY_HS5_PRST_N		66
+#define SKY1_USBPHY_HS6_PRST_N		67
+#define SKY1_USBPHY_HS7_PRST_N		68
+#define SKY1_USBPHY_HS8_PRST_N		69
+#define SKY1_USBPHY_HS9_PRST_N		70
+
+/* reset group1 for usb controllers */
+#define SKY1_USBC_SS0_PRST_N		71
+#define SKY1_USBC_SS1_PRST_N		72
+#define SKY1_USBC_SS2_PRST_N		73
+#define SKY1_USBC_SS3_PRST_N		74
+#define SKY1_USBC_SS4_PRST_N		75
+#define SKY1_USBC_SS5_PRST_N		76
+#define SKY1_USBC_SS0_RST_N		77
+#define SKY1_USBC_SS1_RST_N		78
+#define SKY1_USBC_SS2_RST_N		79
+#define SKY1_USBC_SS3_RST_N		80
+#define SKY1_USBC_SS4_RST_N		81
+#define SKY1_USBC_SS5_RST_N		82
+#define SKY1_USBC_HS0_PRST_N		83
+#define SKY1_USBC_HS1_PRST_N		84
+#define SKY1_USBC_HS2_PRST_N		85
+#define SKY1_USBC_HS3_PRST_N		86
+#define SKY1_USBC_HS0_RST_N		87
+#define SKY1_USBC_HS1_RST_N		88
+#define SKY1_USBC_HS2_RST_N		89
+#define SKY1_USBC_HS3_RST_N		90
+
+/* reset group0 for rcsu */
+#define SKY1_AUDIO_RCSU_RESET_N			91
+#define SKY1_CI700_RCSU_RESET_N			92
+#define SKY1_CSI_RCSU0_RESET_N			93
+#define SKY1_CSI_RCSU1_RESET_N			94
+#define SKY1_CSU_PM_RCSU_RESET_N		95
+#define SKY1_DDR_BROADCAST_RCSU_RESET_N		96
+#define SKY1_DDR_CTRL_RCSU_0_RESET_N		97
+#define SKY1_DDR_CTRL_RCSU_1_RESET_N		98
+#define SKY1_DDR_CTRL_RCSU_2_RESET_N		99
+#define SKY1_DDR_CTRL_RCSU_3_RESET_N		100
+#define SKY1_DDR_TZC400_RCSU_0_RESET_N		101
+#define SKY1_DDR_TZC400_RCSU_1_RESET_N		102
+#define SKY1_DDR_TZC400_RCSU_2_RESET_N		103
+#define SKY1_DDR_TZC400_RCSU_3_RESET_N		104
+#define SKY1_DP0_RCSU_RESET_N			105
+#define SKY1_DP1_RCSU_RESET_N			106
+#define SKY1_DP2_RCSU_RESET_N			107
+#define SKY1_DP3_RCSU_RESET_N			108
+#define SKY1_DP4_RCSU_RESET_N			109
+#define SKY1_DPU0_RCSU_RESET_N			110
+#define SKY1_DPU1_RCSU_RESET_N			111
+#define SKY1_DPU2_RCSU_RESET_N			112
+#define SKY1_DPU3_RCSU_RESET_N			113
+#define SKY1_DPU4_RCSU_RESET_N			114
+#define SKY1_DSU_RCSU_RESET_N			115
+#define SKY1_FCH_RCSU_RESET_N			116
+#define SKY1_GICD_RCSU_RESET_N			117
+#define SKY1_GMAC_RCSU_RESET_N			118
+#define SKY1_GPU_RCSU_RESET_N			119
+#define SKY1_ISP_RCSU0_RESET_N			120
+#define SKY1_ISP_RCSU1_RESET_N			121
+#define SKY1_NI700_MMHUB_RCSU_RESET_N		122
+
+/* reset group1 for rcsu */
+#define SKY1_NPU_RCSU_RESET_N			123
+#define SKY1_NI700_PCIE_RCSU_RESET_N		124
+#define SKY1_PCIE_X421_RCSU_RESET_N		125
+#define SKY1_PCIE_X8_RCSU_RESET_N		126
+#define SKY1_SF_RCSU_RESET_N			127
+#define SKY1_RCSU_SMMU_MMHUB_RESET_N		128
+#define SKY1_RCSU_SMMU_PCIEHUB_RESET_N		129
+#define SKY1_RCSU_SYSHUB_RESET_N		130
+#define SKY1_NI700_SMN_RCSU_RESET_N		131
+#define SKY1_NI700_SYSHUB_RCSU_RESET_N		132
+#define SKY1_RCSU_USB2_HOST0_RESET_N		133
+#define SKY1_RCSU_USB2_HOST1_RESET_N		134
+#define SKY1_RCSU_USB2_HOST2_RESET_N		135
+#define SKY1_RCSU_USB2_HOST3_RESET_N		136
+#define SKY1_RCSU_USB3_TYPEA_DRD_RESET_N	137
+#define SKY1_RCSU_USB3_TYPEC_DRD_RESET_N	138
+#define SKY1_RCSU_USB3_TYPEC_HOST0_RESET_N	139
+#define SKY1_RCSU_USB3_TYPEC_HOST1_RESET_N	140
+#define SKY1_RCSU_USB3_TYPEC_HOST2_RESET_N	141
+#define SKY1_VPU_RCSU_RESET_N			142
+
+#endif
diff --git a/include/dt-bindings/reset/cix,sky1-system-control.h b/include/dt-bindings/reset/cix,sky1-system-control.h
new file mode 100644
index 000000000000..7a16fc4ef3b5
--- /dev/null
+++ b/include/dt-bindings/reset/cix,sky1-system-control.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Author: Jerry Zhu <jerry.zhu@cixtech.com> */
+#ifndef DT_BINDING_RESET_CIX_SKY1_SYSTEM_CONTROL_H
+#define DT_BINDING_RESET_CIX_SKY1_SYSTEM_CONTROL_H
+
+/* func reset for sky1 fch */
+#define SW_I3C0_RST_FUNC_G_N	0
+#define SW_I3C0_RST_FUNC_I_N	1
+#define SW_I3C1_RST_FUNC_G_N	2
+#define SW_I3C1_RST_FUNC_I_N	3
+#define SW_UART0_RST_FUNC_N	4
+#define SW_UART1_RST_FUNC_N	5
+#define SW_UART2_RST_FUNC_N	6
+#define SW_UART3_RST_FUNC_N	7
+#define SW_TIMER_RST_FUNC_N	8
+
+/* apb reset for sky1 fch */
+#define SW_I3C0_RST_APB_N	9
+#define SW_I3C1_RST_APB_N	10
+#define SW_DMA_RST_AXI_N	11
+#define SW_UART0_RST_APB_N	12
+#define SW_UART1_RST_APB_N	13
+#define SW_UART2_RST_APB_N	14
+#define SW_UART3_RST_APB_N	15
+#define SW_SPI0_RST_APB_N	16
+#define SW_SPI1_RST_APB_N	17
+#define SW_I2C0_RST_APB_N	18
+#define SW_I2C1_RST_APB_N	19
+#define SW_I2C2_RST_APB_N	20
+#define SW_I2C3_RST_APB_N	21
+#define SW_I2C4_RST_APB_N	22
+#define SW_I2C5_RST_APB_N	23
+#define SW_I2C6_RST_APB_N	24
+#define SW_I2C7_RST_APB_N	25
+#define SW_GPIO_RST_APB_N	26
+
+/* fch rst for xspi */
+#define SW_XSPI_REG_RST_N	27
+#define SW_XSPI_SYS_RST_N	28
+
+#endif
-- 
2.49.0

Re: [PATCH v10 1/3] dt-bindings: soc: cix: document the syscon on Sky1 SoC

[Krzysztof Kozlowski]

On Mon, Mar 02, 2026 at 02:44:05PM +0800, Gary Yang wrote:
> There are two system control on Cix sky1 Soc. One is located in S0 domain,
> and the other is located in S5 domain. The system control contains resets,
> usb typeC and more. At this point, only the reset controller is embedded
> as usb typeC uses it by phandle.
> 
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>
> ---
>  .../soc/cix/cix,sky1-system-control.yaml      |  42 +++++
>  .../reset/cix,sky1-s5-system-control.h        | 163 ++++++++++++++++++
>  .../reset/cix,sky1-system-control.h           |  41 +++++
>  3 files changed, 246 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
>  create mode 100644 include/dt-bindings/reset/cix,sky1-s5-system-control.h
>  create mode 100644 include/dt-bindings/reset/cix,sky1-system-control.h

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH v10 2/3] reset: add Sky1 soc reset support

[Gary Yang]

Add support for the resets on Cix's Sky1 SoC.
There are two reset controllers on Cix Sky1 Soc. One is located in S0
domain, and the other is located in S5 domain.

Signed-off-by: Gary Yang <gary.yang@cixtech.com>
---
 drivers/reset/Kconfig      |   7 +
 drivers/reset/Makefile     |   1 +
 drivers/reset/reset-sky1.c | 367 +++++++++++++++++++++++++++++++++++++
 3 files changed, 375 insertions(+)
 create mode 100644 drivers/reset/reset-sky1.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 6e5d6deffa7d..3fee381707d8 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -291,6 +291,13 @@ config RESET_SIMPLE
 	   - SiFive FU740 SoCs
 	   - Sophgo SoCs
 
+config RESET_SKY1
+	bool "Cix Sky1 reset controller"
+	depends on ARCH_CIX || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  This enables the reset controller for Cix Sky1.
+
 config RESET_SOCFPGA
 	bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
 	default ARM && ARCH_INTEL_SOCFPGA
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 9c3e484dfd81..0d2e1329561d 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
 obj-$(CONFIG_RESET_RZV2H_USB2PHY) += reset-rzv2h-usb2phy.o
 obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
 obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
+obj-$(CONFIG_RESET_SKY1) += reset-sky1.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_RESET_SPACEMIT) += reset-spacemit.o
 obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
diff --git a/drivers/reset/reset-sky1.c b/drivers/reset/reset-sky1.c
new file mode 100644
index 000000000000..78e80a533c39
--- /dev/null
+++ b/drivers/reset/reset-sky1.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * CIX System Reset Controller (SRC) driver
+ *
+ * Author: Jerry Zhu <jerry.zhu@cixtech.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/reset/cix,sky1-system-control.h>
+#include <dt-bindings/reset/cix,sky1-s5-system-control.h>
+
+#define SKY1_RESET_SLEEP_MIN_US		50
+#define SKY1_RESET_SLEEP_MAX_US		100
+
+struct sky1_src_signal {
+	unsigned int offset;
+	unsigned int bit;
+};
+
+struct sky1_src_variant {
+	const struct sky1_src_signal *signals;
+	unsigned int signals_num;
+};
+
+struct sky1_src {
+	struct reset_controller_dev rcdev;
+	const struct sky1_src_signal *signals;
+	struct regmap *regmap;
+};
+
+enum {
+	CSU_PM_RESET				= 0x304,
+	SENSORFUSION_RESET			= 0x308,
+	SENSORFUSION_NOC_RESET			= 0x30c,
+	RESET_GROUP0_S0_DOMAIN_0		= 0x400,
+	RESET_GROUP0_S0_DOMAIN_1		= 0x404,
+	RESET_GROUP1_USB_PHYS			= 0x408,
+	RESET_GROUP1_USB_CONTROLLERS		= 0x40c,
+	RESET_GROUP0_RCSU			= 0x800,
+	RESET_GROUP1_RCSU			= 0x804,
+};
+
+static const struct sky1_src_signal sky1_src_signals[] = {
+	/* reset group1 for s0 domain modules */
+	[SKY1_CSU_PM_RESET_N]		= { CSU_PM_RESET, BIT(0) },
+	[SKY1_SENSORFUSION_RESET_N]	= { SENSORFUSION_RESET, BIT(0) },
+	[SKY1_SENSORFUSION_NOC_RESET_N]	= { SENSORFUSION_NOC_RESET, BIT(0) },
+	[SKY1_DDRC_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(0) },
+	[SKY1_GIC_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(1) },
+	[SKY1_CI700_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(2) },
+	[SKY1_SYS_NI700_RESET_N]	= { RESET_GROUP0_S0_DOMAIN_0, BIT(3) },
+	[SKY1_MM_NI700_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(4) },
+	[SKY1_PCIE_NI700_RESET_N]	= { RESET_GROUP0_S0_DOMAIN_0, BIT(5) },
+	[SKY1_GPU_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(6) },
+	[SKY1_NPUTOP_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(7) },
+	[SKY1_NPUCORE0_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(8) },
+	[SKY1_NPUCORE1_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(9) },
+	[SKY1_NPUCORE2_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(10) },
+	[SKY1_VPU_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(11) },
+	[SKY1_ISP_SRESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(12) },
+	[SKY1_ISP_ARESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(13) },
+	[SKY1_ISP_HRESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(14) },
+	[SKY1_ISP_GDCRESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(15) },
+	[SKY1_DPU_RESET0_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(16) },
+	[SKY1_DPU_RESET1_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(17) },
+	[SKY1_DPU_RESET2_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(18) },
+	[SKY1_DPU_RESET3_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(19) },
+	[SKY1_DPU_RESET4_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(20) },
+	[SKY1_DP_RESET0_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(21) },
+	[SKY1_DP_RESET1_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(22) },
+	[SKY1_DP_RESET2_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(23) },
+	[SKY1_DP_RESET3_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(24) },
+	[SKY1_DP_RESET4_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(25) },
+	[SKY1_DP_PHY_RST_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(26) },
+
+	/* reset group1 for s0 domain modules */
+	[SKY1_AUDIO_HIFI5_RESET_N]	= { RESET_GROUP0_S0_DOMAIN_1, BIT(0) },
+	[SKY1_AUDIO_HIFI5_NOC_RESET_N]	= { RESET_GROUP0_S0_DOMAIN_1, BIT(1) },
+	[SKY1_CSIDPHY_PRST0_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(2) },
+	[SKY1_CSIDPHY_CMNRST0_N]	= { RESET_GROUP0_S0_DOMAIN_1, BIT(3) },
+	[SKY1_CSI0_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(4) },
+	[SKY1_CSIDPHY_PRST1_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(5) },
+	[SKY1_CSIDPHY_CMNRST1_N]	= { RESET_GROUP0_S0_DOMAIN_1, BIT(6) },
+	[SKY1_CSI1_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(7) },
+	[SKY1_CSI2_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(8) },
+	[SKY1_CSI3_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(9) },
+	[SKY1_CSIBRDGE0_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(10) },
+	[SKY1_CSIBRDGE1_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(11) },
+	[SKY1_CSIBRDGE2_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(12) },
+	[SKY1_CSIBRDGE3_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(13) },
+	[SKY1_GMAC0_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(14) },
+	[SKY1_GMAC1_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(15) },
+	[SKY1_PCIE0_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(16) },
+	[SKY1_PCIE1_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(17) },
+	[SKY1_PCIE2_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(18) },
+	[SKY1_PCIE3_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(19) },
+	[SKY1_PCIE4_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(20) },
+
+	/* reset group1 for usb phys */
+	[SKY1_USB_DP_PHY0_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(0) },
+	[SKY1_USB_DP_PHY1_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(1) },
+	[SKY1_USB_DP_PHY2_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(2) },
+	[SKY1_USB_DP_PHY3_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(3) },
+	[SKY1_USB_DP_PHY0_RST_N]		= { RESET_GROUP1_USB_PHYS, BIT(4) },
+	[SKY1_USB_DP_PHY1_RST_N]		= { RESET_GROUP1_USB_PHYS, BIT(5) },
+	[SKY1_USB_DP_PHY2_RST_N]		= { RESET_GROUP1_USB_PHYS, BIT(6) },
+	[SKY1_USB_DP_PHY3_RST_N]		= { RESET_GROUP1_USB_PHYS, BIT(7) },
+	[SKY1_USBPHY_SS_PST_N]			= { RESET_GROUP1_USB_PHYS, BIT(8) },
+	[SKY1_USBPHY_SS_RST_N]			= { RESET_GROUP1_USB_PHYS, BIT(9) },
+	[SKY1_USBPHY_HS0_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(10) },
+	[SKY1_USBPHY_HS1_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(11) },
+	[SKY1_USBPHY_HS2_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(12) },
+	[SKY1_USBPHY_HS3_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(13) },
+	[SKY1_USBPHY_HS4_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(14) },
+	[SKY1_USBPHY_HS5_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(15) },
+	[SKY1_USBPHY_HS6_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(16) },
+	[SKY1_USBPHY_HS7_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(17) },
+	[SKY1_USBPHY_HS8_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(18) },
+	[SKY1_USBPHY_HS9_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(19) },
+
+	/* reset group1 for usb controllers */
+	[SKY1_USBC_SS0_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(0) },
+	[SKY1_USBC_SS1_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(1) },
+	[SKY1_USBC_SS2_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(2) },
+	[SKY1_USBC_SS3_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(3) },
+	[SKY1_USBC_SS4_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(4) },
+	[SKY1_USBC_SS5_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(5) },
+	[SKY1_USBC_SS0_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(6) },
+	[SKY1_USBC_SS1_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(7) },
+	[SKY1_USBC_SS2_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(8) },
+	[SKY1_USBC_SS3_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(9) },
+	[SKY1_USBC_SS4_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(10) },
+	[SKY1_USBC_SS5_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(11) },
+	[SKY1_USBC_HS0_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(12) },
+	[SKY1_USBC_HS1_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(13) },
+	[SKY1_USBC_HS2_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(14) },
+	[SKY1_USBC_HS3_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(15) },
+	[SKY1_USBC_HS0_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(16) },
+	[SKY1_USBC_HS1_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(17) },
+	[SKY1_USBC_HS2_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(18) },
+	[SKY1_USBC_HS3_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(19) },
+
+	/* reset group0 for rcsu */
+	[SKY1_AUDIO_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(0) },
+	[SKY1_CI700_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(1) },
+	[SKY1_CSI_RCSU0_RESET_N]		= { RESET_GROUP0_RCSU, BIT(2) },
+	[SKY1_CSI_RCSU1_RESET_N]		= { RESET_GROUP0_RCSU, BIT(3) },
+	[SKY1_CSU_PM_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(4) },
+	[SKY1_DDR_BROADCAST_RCSU_RESET_N]	= { RESET_GROUP0_RCSU, BIT(5) },
+	[SKY1_DDR_CTRL_RCSU_0_RESET_N]		= { RESET_GROUP0_RCSU, BIT(6) },
+	[SKY1_DDR_CTRL_RCSU_1_RESET_N]		= { RESET_GROUP0_RCSU, BIT(7) },
+	[SKY1_DDR_CTRL_RCSU_2_RESET_N]		= { RESET_GROUP0_RCSU, BIT(8) },
+	[SKY1_DDR_CTRL_RCSU_3_RESET_N]		= { RESET_GROUP0_RCSU, BIT(9) },
+	[SKY1_DDR_TZC400_RCSU_0_RESET_N]	= { RESET_GROUP0_RCSU, BIT(10) },
+	[SKY1_DDR_TZC400_RCSU_1_RESET_N]	= { RESET_GROUP0_RCSU, BIT(11) },
+	[SKY1_DDR_TZC400_RCSU_2_RESET_N]	= { RESET_GROUP0_RCSU, BIT(12) },
+	[SKY1_DDR_TZC400_RCSU_3_RESET_N]	= { RESET_GROUP0_RCSU, BIT(13) },
+	[SKY1_DP0_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(14) },
+	[SKY1_DP1_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(15) },
+	[SKY1_DP2_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(16) },
+	[SKY1_DP3_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(17) },
+	[SKY1_DP4_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(18) },
+	[SKY1_DPU0_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(19) },
+	[SKY1_DPU1_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(20) },
+	[SKY1_DPU2_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(21) },
+	[SKY1_DPU3_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(22) },
+	[SKY1_DPU4_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(23) },
+	[SKY1_DSU_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(24) },
+	[SKY1_FCH_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(25) },
+	[SKY1_GICD_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(26) },
+	[SKY1_GMAC_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(27) },
+	[SKY1_GPU_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(28) },
+	[SKY1_ISP_RCSU0_RESET_N]		= { RESET_GROUP0_RCSU, BIT(29) },
+	[SKY1_ISP_RCSU1_RESET_N]		= { RESET_GROUP0_RCSU, BIT(30) },
+	[SKY1_NI700_MMHUB_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(31) },
+
+	/* reset group1 for rcsu */
+	[SKY1_NPU_RCSU_RESET_N]			= { RESET_GROUP1_RCSU, BIT(0) },
+	[SKY1_NI700_PCIE_RCSU_RESET_N]		= { RESET_GROUP1_RCSU, BIT(1) },
+	[SKY1_PCIE_X421_RCSU_RESET_N]		= { RESET_GROUP1_RCSU, BIT(2) },
+	[SKY1_PCIE_X8_RCSU_RESET_N]		= { RESET_GROUP1_RCSU, BIT(3) },
+	[SKY1_SF_RCSU_RESET_N]			= { RESET_GROUP1_RCSU, BIT(4) },
+	[SKY1_RCSU_SMMU_MMHUB_RESET_N]		= { RESET_GROUP1_RCSU, BIT(5) },
+	[SKY1_RCSU_SMMU_PCIEHUB_RESET_N]	= { RESET_GROUP1_RCSU, BIT(6) },
+	[SKY1_RCSU_SYSHUB_RESET_N]		= { RESET_GROUP1_RCSU, BIT(7) },
+	[SKY1_NI700_SMN_RCSU_RESET_N]		= { RESET_GROUP1_RCSU, BIT(8) },
+	[SKY1_NI700_SYSHUB_RCSU_RESET_N]	= { RESET_GROUP1_RCSU, BIT(9) },
+	[SKY1_RCSU_USB2_HOST0_RESET_N]		= { RESET_GROUP1_RCSU, BIT(10) },
+	[SKY1_RCSU_USB2_HOST1_RESET_N]		= { RESET_GROUP1_RCSU, BIT(11) },
+	[SKY1_RCSU_USB2_HOST2_RESET_N]		= { RESET_GROUP1_RCSU, BIT(12) },
+	[SKY1_RCSU_USB2_HOST3_RESET_N]		= { RESET_GROUP1_RCSU, BIT(13) },
+	[SKY1_RCSU_USB3_TYPEA_DRD_RESET_N]	= { RESET_GROUP1_RCSU, BIT(14) },
+	[SKY1_RCSU_USB3_TYPEC_DRD_RESET_N]	= { RESET_GROUP1_RCSU, BIT(15) },
+	[SKY1_RCSU_USB3_TYPEC_HOST0_RESET_N]	= { RESET_GROUP1_RCSU, BIT(16) },
+	[SKY1_RCSU_USB3_TYPEC_HOST1_RESET_N]	= { RESET_GROUP1_RCSU, BIT(17) },
+	[SKY1_RCSU_USB3_TYPEC_HOST2_RESET_N]	= { RESET_GROUP1_RCSU, BIT(18) },
+	[SKY1_VPU_RCSU_RESET_N]			= { RESET_GROUP1_RCSU, BIT(19) },
+};
+
+static const struct sky1_src_variant variant_sky1 = {
+	.signals = sky1_src_signals,
+	.signals_num = ARRAY_SIZE(sky1_src_signals),
+};
+
+enum {
+	FCH_SW_RST_FUNC			= 0x8,
+	FCH_SW_RST_BUS			= 0xc,
+	FCH_SW_XSPI			= 0x10,
+};
+
+static const struct sky1_src_signal sky1_src_fch_signals[] = {
+	/* resets for fch_sw_rst_func */
+	[SW_I3C0_RST_FUNC_G_N]	= { FCH_SW_RST_FUNC, BIT(0) },
+	[SW_I3C0_RST_FUNC_I_N]	= { FCH_SW_RST_FUNC, BIT(1) },
+	[SW_I3C1_RST_FUNC_G_N]	= { FCH_SW_RST_FUNC, BIT(2) },
+	[SW_I3C1_RST_FUNC_I_N]	= { FCH_SW_RST_FUNC, BIT(3) },
+	[SW_UART0_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(4) },
+	[SW_UART1_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(5) },
+	[SW_UART2_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(6) },
+	[SW_UART3_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(7) },
+	[SW_TIMER_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(20) },
+
+	/* resets for fch_sw_rst_bus */
+	[SW_I3C0_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(0) },
+	[SW_I3C1_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(1) },
+	[SW_DMA_RST_AXI_N]	= { FCH_SW_RST_BUS, BIT(2) },
+	[SW_UART0_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(4) },
+	[SW_UART1_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(5) },
+	[SW_UART2_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(6) },
+	[SW_UART3_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(7) },
+	[SW_SPI0_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(8) },
+	[SW_SPI1_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(9) },
+	[SW_I2C0_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(12) },
+	[SW_I2C1_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(13) },
+	[SW_I2C2_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(14) },
+	[SW_I2C3_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(15) },
+	[SW_I2C4_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(16) },
+	[SW_I2C5_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(17) },
+	[SW_I2C6_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(18) },
+	[SW_I2C7_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(19) },
+	[SW_GPIO_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(21) },
+
+	/* resets for fch_sw_xspi */
+	[SW_XSPI_REG_RST_N]	= { FCH_SW_XSPI, BIT(0) },
+	[SW_XSPI_SYS_RST_N]	= { FCH_SW_XSPI, BIT(1) },
+};
+
+static const struct sky1_src_variant variant_sky1_fch = {
+	.signals = sky1_src_fch_signals,
+	.signals_num = ARRAY_SIZE(sky1_src_fch_signals),
+};
+
+static struct sky1_src *to_sky1_src(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct sky1_src, rcdev);
+}
+
+static int sky1_reset_set(struct reset_controller_dev *rcdev,
+			  unsigned long id, bool assert)
+{
+	struct sky1_src *sky1src = to_sky1_src(rcdev);
+	const struct sky1_src_signal *signal = &sky1src->signals[id];
+	unsigned int value = assert ? 0 : signal->bit;
+
+	return regmap_update_bits(sky1src->regmap,
+				  signal->offset, signal->bit, value);
+}
+
+static int sky1_reset_assert(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	sky1_reset_set(rcdev, id, true);
+	usleep_range(SKY1_RESET_SLEEP_MIN_US,
+		     SKY1_RESET_SLEEP_MAX_US);
+	return 0;
+}
+
+static int sky1_reset_deassert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	sky1_reset_set(rcdev, id, false);
+	usleep_range(SKY1_RESET_SLEEP_MIN_US,
+		     SKY1_RESET_SLEEP_MAX_US);
+	return 0;
+}
+
+static int sky1_reset(struct reset_controller_dev *rcdev,
+		      unsigned long id)
+{
+	sky1_reset_assert(rcdev, id);
+	sky1_reset_deassert(rcdev, id);
+	return 0;
+}
+
+static int sky1_reset_status(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	unsigned int value = 0;
+	struct sky1_src *sky1src = to_sky1_src(rcdev);
+	const struct sky1_src_signal *signal = &sky1src->signals[id];
+
+	regmap_read(sky1src->regmap, signal->offset, &value);
+	return !(value & signal->bit);
+}
+
+static const struct reset_control_ops sky1_src_ops = {
+	.reset    = sky1_reset,
+	.assert   = sky1_reset_assert,
+	.deassert = sky1_reset_deassert,
+	.status   = sky1_reset_status
+};
+
+static int sky1_reset_probe(struct platform_device *pdev)
+{
+	struct sky1_src *sky1src;
+	struct device *dev = &pdev->dev;
+	const struct sky1_src_variant *variant;
+
+	sky1src = devm_kzalloc(dev, sizeof(*sky1src), GFP_KERNEL);
+	if (!sky1src)
+		return -ENOMEM;
+
+	variant = of_device_get_match_data(dev);
+
+	sky1src->regmap = device_node_to_regmap(dev->of_node);
+	if (IS_ERR(sky1src->regmap)) {
+		return dev_err_probe(dev, PTR_ERR(sky1src->regmap),
+				     "Unable to get sky1-src regmap");
+	}
+
+	sky1src->signals = variant->signals;
+	sky1src->rcdev.owner     = THIS_MODULE;
+	sky1src->rcdev.nr_resets = variant->signals_num;
+	sky1src->rcdev.ops       = &sky1_src_ops;
+	sky1src->rcdev.of_node   = dev->of_node;
+	sky1src->rcdev.dev       = dev;
+
+	return devm_reset_controller_register(dev, &sky1src->rcdev);
+}
+
+static const struct of_device_id sky1_sysreg_of_match[] = {
+	{ .compatible = "cix,sky1-system-control", .data = &variant_sky1_fch},
+	{ .compatible = "cix,sky1-s5-system-control", .data = &variant_sky1},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sky1_sysreg_of_match);
+
+static struct platform_driver sky1_reset_driver = {
+	.probe	= sky1_reset_probe,
+	.driver = {
+		.name		= "cix,sky1-rst",
+		.of_match_table = sky1_sysreg_of_match,
+	},
+};
+module_platform_driver(sky1_reset_driver)
+
+MODULE_AUTHOR("Jerry Zhu <jerry.zhu@cixtech.com>");
+MODULE_DESCRIPTION("Cix Sky1 reset driver");
+MODULE_LICENSE("GPL");
-- 
2.49.0

Re: [PATCH v10 2/3] reset: add Sky1 soc reset support

[Philipp Zabel]

On Mo, 2026-03-02 at 14:44 +0800, Gary Yang wrote:
> Add support for the resets on Cix's Sky1 SoC.
> There are two reset controllers on Cix Sky1 Soc. One is located in S0
> domain, and the other is located in S5 domain.
> 
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp

[PATCH v10 3/3] arm64: dts: cix: add support for cix sky1 resets

[Gary Yang]

There are two reset conctrollers on Cix Sky1 Soc. One is located in S0
domain, and the other is located in S5 domain.

Signed-off-by: Gary Yang <gary.yang@cixtech.com>
---
 arch/arm64/boot/dts/cix/sky1.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index 64b76905cbff..a28b877cced2 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -348,6 +348,12 @@ i3c1: i3c@4100000 {
 			status = "disabled";
 		};
 
+		syscon: syscon@4160000 {
+			compatible = "cix,sky1-system-control", "syscon";
+			reg = <0x0 0x4160000 0x0 0x100>;
+			#reset-cells = <1>;
+		};
+
 		iomuxc: pinctrl@4170000 {
 			compatible = "cix,sky1-pinctrl";
 			reg = <0x0 0x04170000 0x0 0x1000>;
@@ -568,6 +574,12 @@ ppi_partition1: interrupt-partition-1 {
 			};
 		};
 
+		s5_syscon: syscon@16000000 {
+			compatible = "cix,sky1-s5-system-control", "syscon";
+			reg = <0x0 0x16000000 0x0 0x1000>;
+			#reset-cells = <1>;
+		};
+
 		iomuxc_s5: pinctrl@16007000 {
 			compatible = "cix,sky1-pinctrl-s5";
 			reg = <0x0 0x16007000 0x0 0x1000>;
-- 
2.49.0

Re: [PATCH v10 3/3] arm64: dts: cix: add support for cix sky1 resets

[Peter Chen]

On 26-03-02 14:44:07, Gary Yang wrote:
> There are two reset conctrollers on Cix Sky1 Soc. One is located in S0
> domain, and the other is located in S5 domain.
> 
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>

Applied, thanks.

Peter
> ---
>  arch/arm64/boot/dts/cix/sky1.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
> index 64b76905cbff..a28b877cced2 100644
> --- a/arch/arm64/boot/dts/cix/sky1.dtsi
> +++ b/arch/arm64/boot/dts/cix/sky1.dtsi
> @@ -348,6 +348,12 @@ i3c1: i3c@4100000 {
>  			status = "disabled";
>  		};
>  
> +		syscon: syscon@4160000 {
> +			compatible = "cix,sky1-system-control", "syscon";
> +			reg = <0x0 0x4160000 0x0 0x100>;
> +			#reset-cells = <1>;
> +		};
> +
>  		iomuxc: pinctrl@4170000 {
>  			compatible = "cix,sky1-pinctrl";
>  			reg = <0x0 0x04170000 0x0 0x1000>;
> @@ -568,6 +574,12 @@ ppi_partition1: interrupt-partition-1 {
>  			};
>  		};
>  
> +		s5_syscon: syscon@16000000 {
> +			compatible = "cix,sky1-s5-system-control", "syscon";
> +			reg = <0x0 0x16000000 0x0 0x1000>;
> +			#reset-cells = <1>;
> +		};
> +
>  		iomuxc_s5: pinctrl@16007000 {
>  			compatible = "cix,sky1-pinctrl-s5";
>  			reg = <0x0 0x16007000 0x0 0x1000>;
> -- 
> 2.49.0
> 

-- 

Best regards,
Peter

Re: [PATCH v10 0/3] Add support for Cix Sky1 resets

[Philipp Zabel]

On Mo, 2026-03-02 at 14:44 +0800, Gary Yang wrote:
> Patch 1: Add yaml file for Cix Sky1 resets
> Patch 2: Add driver codes for Cix Sky1 resets
> Patch 3: Add dts nodes for Cix Sky1 resets

Applied patches 1-2 to reset/next, thanks!

[1/3] dt-bindings: soc: cix: document the syscon on Sky1 SoC
      https://git.pengutronix.de/cgit/pza/linux/commit/?id=c76350e7add8
[2/3] reset: add Sky1 soc reset support
      https://git.pengutronix.de/cgit/pza/linux/commit/?id=7cd3ca90d921

regards
Philipp