[PATCH v8 0/6] clk: Support spread spectrum and use it in clk-scmi

[PATCH v8 0/6] clk: Support spread spectrum and use it in clk-scmi

[Peng Fan (OSS)]

Since the assigned-clock-sscs property [1] has been accepted into the device
tree schema, we can now support it in the Linux clock driver. Therefore,
I've picked up the previously submitted work [2] titled "clk: Support
spread spectrum and use it in clk-pll144x and clk-scmi."
As more than six months have passed since [2] was posted, I’m treating this
patchset as a new submission rather than a v3.

- Introduce clk_set_spread_spectrum to set the parameters for enabling
  spread spectrum of a clock.
- Parse 'assigned-clock-sscs' and configure it by default before using the
  clock. This property is parsed before parsing clock rate.
- Enable this feature for clk-scmi on i.MX95.

Because SCMI spec will not include spread spectrum as a standard
extension, we still need to use NXP i.MX OEM extension.

[1] https://github.com/devicetree-org/dt-schema/pull/154
[2] https://lore.kernel.org/all/20250205-clk-ssc-v2-0-fa73083caa92@nxp.com/

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
Changes in v8:
- Add R-b from Cristian for patch 5 and patch 6
- Add comment for scmi_clk_oem_info in patch 6
- Rebased to next-20260227
- Link to v7: https://lore.kernel.org/r/20251231-clk-ssc-v7-1-v7-0-380e8b58f9e3@nxp.com

Changes in v7:
- Add R-b from Sebin
- Drop __free usage per comment from Krzysztof in patch 3
- Link to v6: https://lore.kernel.org/linux-clk/20251128-clk-ssc-v6-2-v6-0-cfafdb5d6811@nxp.com/

Changes in v6:
- Add kunit build warning
- Update OEM string comparation per Sebin
- Link to v5: https://lore.kernel.org/linux-clk/20251009-clk-ssc-v5-1-v5-0-d6447d76171e@nxp.com/

Changes in v5:
- Per Stephen, export clk_hw_set_spread_spectrum, use enum for method,
  add const for set_spread_spectrum and rename clk_ss/conf to ss_conf.
- Per Sebin, Cristian, Sudeep, I added clk-scmi-oem.c to support vendor
  extensions.
- Link to v4: https://lore.kernel.org/arm-scmi/aNQPWO6pfA_3mmxf@redhat.com/T/#me81231bf286e2a8e4e00a68707ed1e525a2b4a3d

Changes in v4:
- Add R-b for patch 1 from Brian
- Drop unecessary change in patch 4 Per Brian
- Link to v3: https://lore.kernel.org/r/20250912-clk-ssc-version1-v3-0-fd1e07476ba1@nxp.com

Changes in v3:
- New patch 1 for dt-bindings per comment from Brian
  https://lore.kernel.org/all/aLeEFzXkPog_dt2B@x1/
  This might not be good to add a new dt-binding file in v3. But this is
  quite a simple file that just has four macros to encode modulation
  method. So hope this is fine for DT maintainers.
- Add Brain's R-b for patch 2
- New patch 3 to add Kunit test per Brain. Since Brain helped
  draft part of the code, I added Co-developed-by tag from Brain.
- Link to v2: https://lore.kernel.org/r/20250901-clk-ssc-version1-v2-0-1d0a486dffe6@nxp.com

Changes in v2:
- Simplify the code in patch 2 per Dan Carpenter and Brian Masney
- Rebased to next-20250829
- Link to v1: https://lore.kernel.org/r/20250812-clk-ssc-version1-v1-0-cef60f20d770@nxp.com

---
Peng Fan (6):
      dt-bindings: clock: Add spread spectrum definition
      clk: Introduce clk_hw_set_spread_spectrum
      clk: conf: Support assigned-clock-sscs
      clk: Add KUnit tests for assigned-clock-sscs
      clk: scmi: Introduce common header for SCMI clock interface
      clk: scmi: Add i.MX95 OEM extension support for SCMI clock driver

 drivers/clk/Makefile                               |   8 +-
 drivers/clk/clk-conf.c                             |  75 +++++++++++++
 drivers/clk/clk-scmi-oem.c                         | 108 ++++++++++++++++++
 drivers/clk/clk-scmi.c                             |  44 +++-----
 drivers/clk/clk-scmi.h                             |  51 +++++++++
 drivers/clk/clk.c                                  |  27 +++++
 drivers/clk/clk_test.c                             | 121 ++++++++++++++++++++-
 drivers/clk/kunit_clk_assigned_rates.h             |  10 ++
 drivers/clk/kunit_clk_assigned_rates_multiple.dtso |   6 +
 ...kunit_clk_assigned_rates_multiple_consumer.dtso |   6 +
 drivers/clk/kunit_clk_assigned_rates_one.dtso      |   3 +
 .../clk/kunit_clk_assigned_rates_one_consumer.dtso |   3 +
 .../clk/kunit_clk_assigned_rates_u64_multiple.dtso |   6 +
 ...t_clk_assigned_rates_u64_multiple_consumer.dtso |   6 +
 drivers/clk/kunit_clk_assigned_rates_u64_one.dtso  |   3 +
 .../kunit_clk_assigned_rates_u64_one_consumer.dtso |   3 +
 drivers/clk/kunit_clk_assigned_sscs_null.dtso      |  16 +++
 .../clk/kunit_clk_assigned_sscs_null_consumer.dtso |  20 ++++
 drivers/clk/kunit_clk_assigned_sscs_without.dtso   |  15 +++
 .../kunit_clk_assigned_sscs_without_consumer.dtso  |  19 ++++
 drivers/clk/kunit_clk_assigned_sscs_zero.dtso      |  12 ++
 .../clk/kunit_clk_assigned_sscs_zero_consumer.dtso |  16 +++
 include/dt-bindings/clock/clock.h                  |  14 +++
 include/linux/clk-provider.h                       |  31 ++++++
 24 files changed, 591 insertions(+), 32 deletions(-)
---
base-commit: e56845b74692e92699ca14a9f77bb77fe5c564dc
change-id: 20251231-clk-ssc-v7-1-402dd4f9e629

Best regards,
-- 
Peng Fan <peng.fan@nxp.com>

[PATCH v8 1/6] dt-bindings: clock: Add spread spectrum definition

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Per dt-schema, the modulation methods are: down-spread(3), up-spread(2),
center-spread(1), no-spread(0). So define them in dt-bindings to avoid
write the magic number in device tree.

Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 include/dt-bindings/clock/clock.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/include/dt-bindings/clock/clock.h b/include/dt-bindings/clock/clock.h
new file mode 100644
index 0000000000000000000000000000000000000000..155e2653a120bf10747bd7f4d47f25e0493e0464
--- /dev/null
+++ b/include/dt-bindings/clock/clock.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2025 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_H
+#define __DT_BINDINGS_CLOCK_H
+
+#define CLK_SSC_NO_SPREAD	0
+#define CLK_SSC_CENTER_SPREAD	1
+#define CLK_SSC_UP_SPREAD	2
+#define CLK_SSC_DOWN_SPREAD	3
+
+#endif	/* __DT_BINDINGS_CLOCK_H */

-- 
2.37.1

[PATCH v8 2/6] clk: Introduce clk_hw_set_spread_spectrum

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Add clk_hw_set_spread_spectrum to configure a clock to enable spread
spectrum feature. set_spread_spectrum ops is added for clk drivers to
have their own hardware specific implementation.

Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/clk.c            | 27 +++++++++++++++++++++++++++
 include/linux/clk-provider.h | 31 +++++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 47093cda9df32223c1120c3710261296027c4cd3..3d9b2e2f7a5b269e1f07bdcd4101799ff6839441 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2784,6 +2784,33 @@ int clk_set_max_rate(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL_GPL(clk_set_max_rate);
 
+int clk_hw_set_spread_spectrum(struct clk_hw *hw, const struct clk_spread_spectrum *ss_conf)
+{
+	struct clk_core *core;
+	int ret;
+
+	if (!hw)
+		return 0;
+
+	core = hw->core;
+
+	clk_prepare_lock();
+
+	ret = clk_pm_runtime_get(core);
+	if (ret)
+		goto fail;
+
+	if (core->ops->set_spread_spectrum)
+		ret = core->ops->set_spread_spectrum(hw, ss_conf);
+
+	clk_pm_runtime_put(core);
+
+fail:
+	clk_prepare_unlock();
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_hw_set_spread_spectrum);
+
 /**
  * clk_get_parent - return the parent of a clk
  * @clk: the clk whose parent gets returned
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 630705a47129453c241f1b1755f2c2f2a7ed8f77..9ec25bbccd613eafd77aca080dd7f51b1bfdadc1 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -6,6 +6,7 @@
 #ifndef __LINUX_CLK_PROVIDER_H
 #define __LINUX_CLK_PROVIDER_H
 
+#include <dt-bindings/clock/clock.h>
 #include <linux/of.h>
 #include <linux/of_clk.h>
 
@@ -84,6 +85,26 @@ struct clk_duty {
 	unsigned int den;
 };
 
+enum clk_ssc_method {
+	CLK_SPREAD_NO		= CLK_SSC_NO_SPREAD,
+	CLK_SPREAD_CENTER	= CLK_SSC_CENTER_SPREAD,
+	CLK_SPREAD_UP		= CLK_SSC_UP_SPREAD,
+	CLK_SPREAD_DOWN		= CLK_SSC_DOWN_SPREAD,
+};
+
+/**
+ * struct clk_spread_spectrum - Structure encoding spread spectrum of a clock
+ *
+ * @modfreq_hz:		Modulation frequency
+ * @spread_bp:		Modulation percent in permyriad
+ * @method:		Modulation method
+ */
+struct clk_spread_spectrum {
+	u32 modfreq_hz;
+	u32 spread_bp;
+	enum clk_ssc_method method;
+};
+
 /**
  * struct clk_ops -  Callback operations for hardware clocks; these are to
  * be provided by the clock implementation, and will be called by drivers
@@ -178,6 +199,12 @@ struct clk_duty {
  *		separately via calls to .set_parent and .set_rate.
  *		Returns 0 on success, -EERROR otherwise.
  *
+ * @set_spread_spectrum: Optional callback used to configure the spread
+ *		spectrum modulation frequency, percentage, and method
+ *		to reduce EMI by spreading the clock frequency over a
+ *		wider range.
+ *		Returns 0 on success, -EERROR otherwise.
+ *
  * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
  *		is expressed in ppb (parts per billion). The parent accuracy is
  *		an input parameter.
@@ -255,6 +282,8 @@ struct clk_ops {
 	int		(*set_rate_and_parent)(struct clk_hw *hw,
 				    unsigned long rate,
 				    unsigned long parent_rate, u8 index);
+	int		(*set_spread_spectrum)(struct clk_hw *hw,
+					       const struct clk_spread_spectrum *ss_conf);
 	unsigned long	(*recalc_accuracy)(struct clk_hw *hw,
 					   unsigned long parent_accuracy);
 	int		(*get_phase)(struct clk_hw *hw);
@@ -1430,6 +1459,8 @@ void clk_hw_get_rate_range(struct clk_hw *hw, unsigned long *min_rate,
 			   unsigned long *max_rate);
 void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
 			   unsigned long max_rate);
+int clk_hw_set_spread_spectrum(struct clk_hw *hw,
+			       const struct clk_spread_spectrum *ss_conf);
 
 static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src)
 {

-- 
2.37.1

[PATCH v8 3/6] clk: conf: Support assigned-clock-sscs

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Parse the Spread Spectrum Configuration(SSC) from device tree and configure
them before using the clock.

Each SSC is three u32 elements which means '<modfreq spreaddepth
modmethod>', so assigned-clock-sscs is an array of multiple three u32
elements.

Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/clk-conf.c | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c
index 303a0bb26e54a95655ce094a35b989c97ebc6fd8..cdc7631f2e159bdaa6829ba5a3b5695dc1c31423 100644
--- a/drivers/clk/clk-conf.c
+++ b/drivers/clk/clk-conf.c
@@ -155,6 +155,77 @@ static int __set_clk_rates(struct device_node *node, bool clk_supplier)
 	return 0;
 }
 
+static int __set_clk_spread_spectrum(struct device_node *node, bool clk_supplier)
+{
+	u32 elem_size = sizeof(struct clk_spread_spectrum);
+	struct clk_spread_spectrum *sscs;
+	struct of_phandle_args clkspec;
+	int rc, count, index;
+	struct clk *clk;
+
+	/* modfreq, spreadPercent, modmethod */
+	count = of_property_count_elems_of_size(node, "assigned-clock-sscs", elem_size);
+	if (count <= 0)
+		return 0;
+
+	sscs = kcalloc(count, elem_size, GFP_KERNEL);
+	if (!sscs)
+		return -ENOMEM;
+
+	rc = of_property_read_u32_array(node, "assigned-clock-sscs", (u32 *)sscs,
+					count * 3);
+	if (rc)
+		goto free_sscs;
+
+	for (index = 0; index < count; index++) {
+		struct clk_spread_spectrum *conf = &sscs[index];
+		struct clk_hw *hw;
+
+		if (!conf->modfreq_hz && !conf->spread_bp && !conf->method)
+			continue;
+
+		rc = of_parse_phandle_with_args(node, "assigned-clocks", "#clock-cells",
+						index, &clkspec);
+		if (rc < 0) {
+			/* skip empty (null) phandles */
+			if (rc == -ENOENT)
+				continue;
+			else
+				goto free_sscs;
+		}
+
+		if (clkspec.np == node && !clk_supplier) {
+			of_node_put(clkspec.np);
+			goto free_sscs;
+		}
+
+		clk = of_clk_get_from_provider(&clkspec);
+		of_node_put(clkspec.np);
+		if (IS_ERR(clk)) {
+			if (PTR_ERR(clk) != -EPROBE_DEFER)
+				pr_warn("clk: couldn't get clock %d for %pOF\n",
+					index, node);
+			rc = PTR_ERR(clk);
+			goto free_sscs;
+		}
+
+		hw = __clk_get_hw(clk);
+		rc = clk_hw_set_spread_spectrum(hw, conf);
+		if (rc < 0) {
+			pr_err("clk: couldn't set %s clk spread spectrum %u %u %u: %d\n",
+			       __clk_get_name(clk), conf->modfreq_hz, conf->spread_bp,
+			       conf->method, rc);
+			/* Do not fail */
+			rc = 0;
+		}
+		clk_put(clk);
+	}
+
+free_sscs:
+	kfree(sscs);
+	return rc;
+}
+
 /**
  * of_clk_set_defaults() - parse and set assigned clocks configuration
  * @node: device node to apply clock settings for
@@ -174,6 +245,10 @@ int of_clk_set_defaults(struct device_node *node, bool clk_supplier)
 	if (!node)
 		return 0;
 
+	rc = __set_clk_spread_spectrum(node, clk_supplier);
+	if (rc < 0)
+		return rc;
+
 	rc = __set_clk_parents(node, clk_supplier);
 	if (rc < 0)
 		return rc;

-- 
2.37.1

[PATCH v8 4/6] clk: Add KUnit tests for assigned-clock-sscs

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Spread spectrum configuration is part of clock frequency settings,
and its behavior can be validated similarly to assigned clock rates.

Extend the existing KUnit tests for assigned-clock-rates to cover
assigned-clock-sscs by reusing the test framework. Add new test
device trees:
  - kunit_clk_assigned_sscs_null.dtso
  - kunit_clk_assigned_sscs_null_consumer.dtso
  - kunit_clk_assigned_sscs_without.dtso
  - kunit_clk_assigned_sscs_without_consumer.dtso
  - kunit_clk_assigned_sscs_zero.dtso
  - kunit_clk_assigned_sscs_zero_consumer.dtso

These tests cover various invalid configurations of assigned-clock-sscs,
ensuring robustness and consistent error handling, similar to the coverage
provided for assigned-clock-rates.

Co-developed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/Makefile                               |   6 +
 drivers/clk/clk_test.c                             | 121 ++++++++++++++++++++-
 drivers/clk/kunit_clk_assigned_rates.h             |  10 ++
 drivers/clk/kunit_clk_assigned_rates_multiple.dtso |   6 +
 ...kunit_clk_assigned_rates_multiple_consumer.dtso |   6 +
 drivers/clk/kunit_clk_assigned_rates_one.dtso      |   3 +
 .../clk/kunit_clk_assigned_rates_one_consumer.dtso |   3 +
 .../clk/kunit_clk_assigned_rates_u64_multiple.dtso |   6 +
 ...t_clk_assigned_rates_u64_multiple_consumer.dtso |   6 +
 drivers/clk/kunit_clk_assigned_rates_u64_one.dtso  |   3 +
 .../kunit_clk_assigned_rates_u64_one_consumer.dtso |   3 +
 drivers/clk/kunit_clk_assigned_sscs_null.dtso      |  16 +++
 .../clk/kunit_clk_assigned_sscs_null_consumer.dtso |  20 ++++
 drivers/clk/kunit_clk_assigned_sscs_without.dtso   |  15 +++
 .../kunit_clk_assigned_sscs_without_consumer.dtso  |  19 ++++
 drivers/clk/kunit_clk_assigned_sscs_zero.dtso      |  12 ++
 .../clk/kunit_clk_assigned_sscs_zero_consumer.dtso |  16 +++
 17 files changed, 268 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f7bce3951a30d2783ae1a4fd5be49aeadd538e8b..e053303984b8d61d5c74dc4cdb582eb2692f4ca1 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -18,6 +18,12 @@ clk-test-y			:= clk_test.o \
 				   kunit_clk_assigned_rates_without_consumer.dtbo.o \
 				   kunit_clk_assigned_rates_zero.dtbo.o \
 				   kunit_clk_assigned_rates_zero_consumer.dtbo.o \
+				   kunit_clk_assigned_sscs_null.dtbo.o \
+				   kunit_clk_assigned_sscs_null_consumer.dtbo.o \
+				   kunit_clk_assigned_sscs_without.dtbo.o \
+				   kunit_clk_assigned_sscs_without_consumer.dtbo.o \
+				   kunit_clk_assigned_sscs_zero.dtbo.o \
+				   kunit_clk_assigned_sscs_zero_consumer.dtbo.o \
 				   kunit_clk_hw_get_dev_of_node.dtbo.o \
 				   kunit_clk_parent_data_test.dtbo.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-divider.o
diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index a268d7b5d4cb28ec1f029f828c31107f8e130556..97113b61c2841701a44603ca9935638374000a2e 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -28,6 +28,7 @@ static const struct clk_ops empty_clk_ops = { };
 struct clk_dummy_context {
 	struct clk_hw hw;
 	unsigned long rate;
+	struct clk_spread_spectrum sscs;
 };
 
 static unsigned long clk_dummy_recalc_rate(struct clk_hw *hw,
@@ -83,6 +84,17 @@ static int clk_dummy_set_rate(struct clk_hw *hw,
 	return 0;
 }
 
+static int clk_dummy_set_spread_spectrum(struct clk_hw *hw,
+					 const struct clk_spread_spectrum *ss_conf)
+{
+	struct clk_dummy_context *ctx =
+		container_of(hw, struct clk_dummy_context, hw);
+
+	ctx->sscs = *ss_conf;
+
+	return 0;
+}
+
 static int clk_dummy_single_set_parent(struct clk_hw *hw, u8 index)
 {
 	if (index >= clk_hw_get_num_parents(hw))
@@ -100,18 +112,21 @@ static const struct clk_ops clk_dummy_rate_ops = {
 	.recalc_rate = clk_dummy_recalc_rate,
 	.determine_rate = clk_dummy_determine_rate,
 	.set_rate = clk_dummy_set_rate,
+	.set_spread_spectrum = clk_dummy_set_spread_spectrum,
 };
 
 static const struct clk_ops clk_dummy_maximize_rate_ops = {
 	.recalc_rate = clk_dummy_recalc_rate,
 	.determine_rate = clk_dummy_maximize_rate,
 	.set_rate = clk_dummy_set_rate,
+	.set_spread_spectrum = clk_dummy_set_spread_spectrum,
 };
 
 static const struct clk_ops clk_dummy_minimize_rate_ops = {
 	.recalc_rate = clk_dummy_recalc_rate,
 	.determine_rate = clk_dummy_minimize_rate,
 	.set_rate = clk_dummy_set_rate,
+	.set_spread_spectrum = clk_dummy_set_spread_spectrum,
 };
 
 static const struct clk_ops clk_dummy_single_parent_ops = {
@@ -3097,6 +3112,7 @@ struct clk_assigned_rates_context {
  * @overlay_end: Pointer to end of DT overlay to apply for test
  * @rate0: Initial rate of first clk
  * @rate1: Initial rate of second clk
+ * @sscs: Initial spread spectrum settings
  * @consumer_test: true if a consumer is being tested
  */
 struct clk_assigned_rates_test_param {
@@ -3105,6 +3121,7 @@ struct clk_assigned_rates_test_param {
 	u8 *overlay_end;
 	unsigned long rate0;
 	unsigned long rate1;
+	struct clk_spread_spectrum sscs;
 	bool consumer_test;
 };
 
@@ -3116,7 +3133,7 @@ static void
 clk_assigned_rates_register_clk(struct kunit *test,
 				struct clk_dummy_context *ctx,
 				struct device_node *np, const char *name,
-				unsigned long rate)
+				unsigned long rate, const struct clk_spread_spectrum *sscs)
 {
 	struct clk_init_data init = { };
 
@@ -3124,6 +3141,7 @@ clk_assigned_rates_register_clk(struct kunit *test,
 	init.ops = &clk_dummy_rate_ops;
 	ctx->hw.init = &init;
 	ctx->rate = rate;
+	ctx->sscs = *sscs;
 
 	KUNIT_ASSERT_EQ(test, 0, of_clk_hw_register_kunit(test, np, &ctx->hw));
 	KUNIT_ASSERT_EQ(test, ctx->rate, rate);
@@ -3167,14 +3185,16 @@ static int clk_assigned_rates_test_init(struct kunit *test)
 	KUNIT_ASSERT_LT(test, clk_cells, 2);
 
 	clk_assigned_rates_register_clk(test, &ctx->clk0, np,
-					"test_assigned_rate0", test_param->rate0);
+					"test_assigned_rate0", test_param->rate0,
+					&test_param->sscs);
 	if (clk_cells == 0) {
 		KUNIT_ASSERT_EQ(test, 0,
 				of_clk_add_hw_provider_kunit(test, np, of_clk_hw_simple_get,
 							     &ctx->clk0.hw));
 	} else if (clk_cells == 1) {
 		clk_assigned_rates_register_clk(test, &ctx->clk1, np,
-						"test_assigned_rate1", test_param->rate1);
+						"test_assigned_rate1", test_param->rate1,
+						&test_param->sscs);
 
 		KUNIT_ASSERT_NOT_ERR_OR_NULL(test,
 			data = kunit_kzalloc(test, struct_size(data, hws, 2), GFP_KERNEL));
@@ -3203,6 +3223,9 @@ static void clk_assigned_rates_assigns_one(struct kunit *test)
 	struct clk_assigned_rates_context *ctx = test->priv;
 
 	KUNIT_EXPECT_EQ(test, ctx->clk0.rate, ASSIGNED_RATES_0_RATE);
+	KUNIT_EXPECT_EQ(test, ctx->clk0.sscs.modfreq_hz, ASSIGNED_SSCS_0_MODFREQ);
+	KUNIT_EXPECT_EQ(test, ctx->clk0.sscs.spread_bp, ASSIGNED_SSCS_0_SPREAD);
+	KUNIT_EXPECT_EQ(test, ctx->clk0.sscs.method, ASSIGNED_SSCS_0_METHOD);
 }
 
 static void clk_assigned_rates_assigns_multiple(struct kunit *test)
@@ -3210,7 +3233,13 @@ static void clk_assigned_rates_assigns_multiple(struct kunit *test)
 	struct clk_assigned_rates_context *ctx = test->priv;
 
 	KUNIT_EXPECT_EQ(test, ctx->clk0.rate, ASSIGNED_RATES_0_RATE);
+	KUNIT_EXPECT_EQ(test, ctx->clk0.sscs.modfreq_hz, ASSIGNED_SSCS_0_MODFREQ);
+	KUNIT_EXPECT_EQ(test, ctx->clk0.sscs.spread_bp, ASSIGNED_SSCS_0_SPREAD);
+	KUNIT_EXPECT_EQ(test, ctx->clk0.sscs.method, ASSIGNED_SSCS_0_METHOD);
 	KUNIT_EXPECT_EQ(test, ctx->clk1.rate, ASSIGNED_RATES_1_RATE);
+	KUNIT_EXPECT_EQ(test, ctx->clk1.sscs.modfreq_hz, ASSIGNED_SSCS_1_MODFREQ);
+	KUNIT_EXPECT_EQ(test, ctx->clk1.sscs.spread_bp, ASSIGNED_SSCS_1_SPREAD);
+	KUNIT_EXPECT_EQ(test, ctx->clk1.sscs.method, ASSIGNED_SSCS_1_METHOD);
 }
 
 static void clk_assigned_rates_skips(struct kunit *test)
@@ -3222,6 +3251,19 @@ static void clk_assigned_rates_skips(struct kunit *test)
 	KUNIT_EXPECT_EQ(test, ctx->clk0.rate, test_param->rate0);
 }
 
+static void clk_assigned_sscs_skips(struct kunit *test)
+{
+	struct clk_assigned_rates_context *ctx = test->priv;
+	const struct clk_assigned_rates_test_param *test_param = test->param_value;
+
+	KUNIT_EXPECT_NE(test, ctx->clk0.sscs.modfreq_hz, ASSIGNED_SSCS_0_MODFREQ);
+	KUNIT_EXPECT_NE(test, ctx->clk0.sscs.spread_bp, ASSIGNED_SSCS_0_SPREAD);
+	KUNIT_EXPECT_NE(test, ctx->clk0.sscs.method, ASSIGNED_SSCS_0_METHOD);
+	KUNIT_EXPECT_EQ(test, ctx->clk0.sscs.modfreq_hz, test_param->sscs.modfreq_hz);
+	KUNIT_EXPECT_EQ(test, ctx->clk0.sscs.spread_bp, test_param->sscs.spread_bp);
+	KUNIT_EXPECT_EQ(test, ctx->clk0.sscs.method, test_param->sscs.method);
+}
+
 OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_one);
 OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_one_consumer);
 OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_u64_one);
@@ -3384,6 +3426,77 @@ KUNIT_ARRAY_PARAM_DESC(clk_assigned_rates_skips,
 		       clk_assigned_rates_skips_test_params,
 		       desc)
 
+OF_OVERLAY_DECLARE(kunit_clk_assigned_sscs_without);
+OF_OVERLAY_DECLARE(kunit_clk_assigned_sscs_without_consumer);
+OF_OVERLAY_DECLARE(kunit_clk_assigned_sscs_zero);
+OF_OVERLAY_DECLARE(kunit_clk_assigned_sscs_zero_consumer);
+OF_OVERLAY_DECLARE(kunit_clk_assigned_sscs_null);
+OF_OVERLAY_DECLARE(kunit_clk_assigned_sscs_null_consumer);
+
+/* Test cases that skip changing the sscs due to malformed DT */
+static const struct clk_assigned_rates_test_param clk_assigned_sscs_skips_test_params[] = {
+	{
+		/*
+		 * Test that an assigned-clock-sscs property without an assigned-clocks
+		 * property fails when the property is in the provider.
+		 */
+		.desc = "provider missing assigned-clocks",
+		TEST_PARAM_OVERLAY(kunit_clk_assigned_sscs_without),
+		.sscs = {50000, 60000, 3},
+	},
+	{
+		/*
+		 * Test that an assigned-clock-rates property without an assigned-clocks
+		 * property fails when the property is in the consumer.
+		 */
+		.desc = "consumer missing assigned-clocks",
+		TEST_PARAM_OVERLAY(kunit_clk_assigned_sscs_without_consumer),
+		.sscs = {50000, 60000, 3},
+		.consumer_test = true,
+	},
+	{
+		/*
+		 * Test that an assigned-clock-rates property of zero doesn't
+		 * set a rate when the property is in the provider.
+		 */
+		.desc = "provider assigned-clock-sscs of zero",
+		TEST_PARAM_OVERLAY(kunit_clk_assigned_sscs_zero),
+		.sscs = {50000, 60000, 3},
+	},
+	{
+		/*
+		 * Test that an assigned-clock-rates property of zero doesn't
+		 * set a rate when the property is in the consumer.
+		 */
+		.desc = "consumer assigned-clock-sscs of zero",
+		TEST_PARAM_OVERLAY(kunit_clk_assigned_sscs_zero_consumer),
+		.sscs = {50000, 60000, 3},
+		.consumer_test = true,
+	},
+	{
+		/*
+		 * Test that an assigned-clocks property with a null phandle
+		 * doesn't set a rate when the property is in the provider.
+		 */
+		.desc = "provider assigned-clocks null phandle",
+		TEST_PARAM_OVERLAY(kunit_clk_assigned_sscs_null),
+		.sscs = {50000, 60000, 3},
+	},
+	{
+		/*
+		 * Test that an assigned-clocks property with a null phandle
+		 * doesn't set a rate when the property is in the consumer.
+		 */
+		.desc = "provider assigned-clocks null phandle",
+		TEST_PARAM_OVERLAY(kunit_clk_assigned_sscs_null_consumer),
+		.sscs = {50000, 60000, 3},
+		.consumer_test = true,
+	},
+};
+KUNIT_ARRAY_PARAM_DESC(clk_assigned_sscs_skips,
+		       clk_assigned_sscs_skips_test_params,
+		       desc)
+
 static struct kunit_case clk_assigned_rates_test_cases[] = {
 	KUNIT_CASE_PARAM(clk_assigned_rates_assigns_one,
 			 clk_assigned_rates_assigns_one_gen_params),
@@ -3391,6 +3504,8 @@ static struct kunit_case clk_assigned_rates_test_cases[] = {
 			 clk_assigned_rates_assigns_multiple_gen_params),
 	KUNIT_CASE_PARAM(clk_assigned_rates_skips,
 			 clk_assigned_rates_skips_gen_params),
+	KUNIT_CASE_PARAM(clk_assigned_sscs_skips,
+			 clk_assigned_sscs_skips_gen_params),
 	{}
 };
 
diff --git a/drivers/clk/kunit_clk_assigned_rates.h b/drivers/clk/kunit_clk_assigned_rates.h
index df2d84dcaa93511694b6da842debdc3cfd3a6c19..d7ae5ec2d25bed79b8438e8ce580872131ce4286 100644
--- a/drivers/clk/kunit_clk_assigned_rates.h
+++ b/drivers/clk/kunit_clk_assigned_rates.h
@@ -1,8 +1,18 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+
+#include <dt-bindings/clock/clock.h>
+
 #ifndef _KUNIT_CLK_ASSIGNED_RATES_H
 #define _KUNIT_CLK_ASSIGNED_RATES_H
 
 #define ASSIGNED_RATES_0_RATE		1600000
 #define ASSIGNED_RATES_1_RATE		9700000
 
+#define ASSIGNED_SSCS_0_MODFREQ		10000
+#define ASSIGNED_SSCS_0_SPREAD		30000
+#define ASSIGNED_SSCS_0_METHOD		CLK_SSC_CENTER_SPREAD
+#define ASSIGNED_SSCS_1_MODFREQ		20000
+#define ASSIGNED_SSCS_1_SPREAD		40000
+#define ASSIGNED_SSCS_1_METHOD		CLK_SSC_UP_SPREAD
+
 #endif
diff --git a/drivers/clk/kunit_clk_assigned_rates_multiple.dtso b/drivers/clk/kunit_clk_assigned_rates_multiple.dtso
index e600736e70f5041ddeb1bfb0d6074746a064e08a..6c54d65444d5d779c9fa4bb2a79c4742dd88f6d0 100644
--- a/drivers/clk/kunit_clk_assigned_rates_multiple.dtso
+++ b/drivers/clk/kunit_clk_assigned_rates_multiple.dtso
@@ -12,5 +12,11 @@ clk: kunit-clock {
 				  <&clk 1>;
 		assigned-clock-rates = <ASSIGNED_RATES_0_RATE>,
 				       <ASSIGNED_RATES_1_RATE>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>,
+				      <ASSIGNED_SSCS_1_MODFREQ
+				       ASSIGNED_SSCS_1_SPREAD
+				       ASSIGNED_SSCS_1_METHOD>;
 	};
 };
diff --git a/drivers/clk/kunit_clk_assigned_rates_multiple_consumer.dtso b/drivers/clk/kunit_clk_assigned_rates_multiple_consumer.dtso
index 260aba458daf2bc57fde46b5442453e7de10faac..b1fee396c4b1e51341a411168569d8351bb23b12 100644
--- a/drivers/clk/kunit_clk_assigned_rates_multiple_consumer.dtso
+++ b/drivers/clk/kunit_clk_assigned_rates_multiple_consumer.dtso
@@ -16,5 +16,11 @@ kunit-clock-consumer {
 				  <&clk 1>;
 		assigned-clock-rates = <ASSIGNED_RATES_0_RATE>,
 				       <ASSIGNED_RATES_1_RATE>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>,
+				      <ASSIGNED_SSCS_1_MODFREQ
+				       ASSIGNED_SSCS_1_SPREAD
+				       ASSIGNED_SSCS_1_METHOD>;
 	};
 };
diff --git a/drivers/clk/kunit_clk_assigned_rates_one.dtso b/drivers/clk/kunit_clk_assigned_rates_one.dtso
index dd95ec9b1cf977883f71564a94602ae518937132..da6e91b9e6bda0ef2c8f601a08aef1f10fda4baa 100644
--- a/drivers/clk/kunit_clk_assigned_rates_one.dtso
+++ b/drivers/clk/kunit_clk_assigned_rates_one.dtso
@@ -10,5 +10,8 @@ clk: kunit-clock {
 		#clock-cells = <0>;
 		assigned-clocks = <&clk>;
 		assigned-clock-rates = <ASSIGNED_RATES_0_RATE>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>;
 	};
 };
diff --git a/drivers/clk/kunit_clk_assigned_rates_one_consumer.dtso b/drivers/clk/kunit_clk_assigned_rates_one_consumer.dtso
index a41dca806318b031187c1b8739fcf71eb088a480..4b6e06048f863d014aed8222652d6d9d38e9238b 100644
--- a/drivers/clk/kunit_clk_assigned_rates_one_consumer.dtso
+++ b/drivers/clk/kunit_clk_assigned_rates_one_consumer.dtso
@@ -14,5 +14,8 @@ kunit-clock-consumer {
 		compatible = "test,clk-consumer";
 		assigned-clocks = <&clk>;
 		assigned-clock-rates = <ASSIGNED_RATES_0_RATE>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>;
 	};
 };
diff --git a/drivers/clk/kunit_clk_assigned_rates_u64_multiple.dtso b/drivers/clk/kunit_clk_assigned_rates_u64_multiple.dtso
index 389b4e2eb7f74f1770ff5f5c4be5b45dd344dc9c..3a717dab2d00b7fdaff580e30ed2cc520683ef95 100644
--- a/drivers/clk/kunit_clk_assigned_rates_u64_multiple.dtso
+++ b/drivers/clk/kunit_clk_assigned_rates_u64_multiple.dtso
@@ -12,5 +12,11 @@ clk: kunit-clock {
 				  <&clk 1>;
 		assigned-clock-rates-u64 = /bits/ 64 <ASSIGNED_RATES_0_RATE>,
 					   /bits/ 64 <ASSIGNED_RATES_1_RATE>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>,
+				      <ASSIGNED_SSCS_1_MODFREQ
+				       ASSIGNED_SSCS_1_SPREAD
+				       ASSIGNED_SSCS_1_METHOD>;
 	};
 };
diff --git a/drivers/clk/kunit_clk_assigned_rates_u64_multiple_consumer.dtso b/drivers/clk/kunit_clk_assigned_rates_u64_multiple_consumer.dtso
index 3e117fd59b7da19cd8a603af77eff29175ce6900..cbee7cbad068f3336f0c8997a5b3e9af4db565c9 100644
--- a/drivers/clk/kunit_clk_assigned_rates_u64_multiple_consumer.dtso
+++ b/drivers/clk/kunit_clk_assigned_rates_u64_multiple_consumer.dtso
@@ -16,5 +16,11 @@ kunit-clock-consumer {
 				  <&clk 1>;
 		assigned-clock-rates-u64 = /bits/ 64 <ASSIGNED_RATES_0_RATE>,
 					   /bits/ 64 <ASSIGNED_RATES_1_RATE>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>,
+				      <ASSIGNED_SSCS_1_MODFREQ
+				       ASSIGNED_SSCS_1_SPREAD
+				       ASSIGNED_SSCS_1_METHOD>;
 	};
 };
diff --git a/drivers/clk/kunit_clk_assigned_rates_u64_one.dtso b/drivers/clk/kunit_clk_assigned_rates_u64_one.dtso
index 87041264e8f544dafddf2e905efc89dc1f917c54..9b04d6927f0830a5621af1cbea503a427b46bee0 100644
--- a/drivers/clk/kunit_clk_assigned_rates_u64_one.dtso
+++ b/drivers/clk/kunit_clk_assigned_rates_u64_one.dtso
@@ -10,5 +10,8 @@ clk: kunit-clock {
 		#clock-cells = <0>;
 		assigned-clocks = <&clk>;
 		assigned-clock-rates-u64 = /bits/ 64 <ASSIGNED_RATES_0_RATE>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>;
 	};
 };
diff --git a/drivers/clk/kunit_clk_assigned_rates_u64_one_consumer.dtso b/drivers/clk/kunit_clk_assigned_rates_u64_one_consumer.dtso
index 3259c003aec0be3269ab60a4a3a95df69f8de1f8..4784d40520f4193e4f08c8981386f0772a063452 100644
--- a/drivers/clk/kunit_clk_assigned_rates_u64_one_consumer.dtso
+++ b/drivers/clk/kunit_clk_assigned_rates_u64_one_consumer.dtso
@@ -14,5 +14,8 @@ kunit-clock-consumer {
 		compatible = "test,clk-consumer";
 		assigned-clocks = <&clk>;
 		assigned-clock-rates-u64 = /bits/ 64 <ASSIGNED_RATES_0_RATE>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>;
 	};
 };
diff --git a/drivers/clk/kunit_clk_assigned_sscs_null.dtso b/drivers/clk/kunit_clk_assigned_sscs_null.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..43b2068c845dea53ea1328bb63a2f58a4b8ef339
--- /dev/null
+++ b/drivers/clk/kunit_clk_assigned_sscs_null.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+#include "kunit_clk_assigned_rates.h"
+
+&{/} {
+	clk: kunit-clock {
+		compatible = "test,clk-assigned-rates";
+		#clock-cells = <0>;
+		assigned-clocks = <0>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>;
+	};
+};
diff --git a/drivers/clk/kunit_clk_assigned_sscs_null_consumer.dtso b/drivers/clk/kunit_clk_assigned_sscs_null_consumer.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..bda008f5aaa35e53af97863e4f2e6d8a168cc053
--- /dev/null
+++ b/drivers/clk/kunit_clk_assigned_sscs_null_consumer.dtso
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+#include "kunit_clk_assigned_rates.h"
+
+&{/} {
+	clk: kunit-clock {
+		compatible = "test,clk-assigned-rates";
+		#clock-cells = <0>;
+	};
+
+	kunit-clock-consumer {
+		compatible = "test,clk-consumer";
+		assigned-clocks = <0>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>;
+	};
+};
diff --git a/drivers/clk/kunit_clk_assigned_sscs_without.dtso b/drivers/clk/kunit_clk_assigned_sscs_without.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..08660846b55c12122bfb211c01c377a3a45223c9
--- /dev/null
+++ b/drivers/clk/kunit_clk_assigned_sscs_without.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+#include "kunit_clk_assigned_rates.h"
+
+&{/} {
+	clk: kunit-clock {
+		compatible = "test,clk-assigned-rates";
+		#clock-cells = <0>;
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>;
+	};
+};
diff --git a/drivers/clk/kunit_clk_assigned_sscs_without_consumer.dtso b/drivers/clk/kunit_clk_assigned_sscs_without_consumer.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..e1c089c6f0c0223f16f7ac9a396e7ac7b821c967
--- /dev/null
+++ b/drivers/clk/kunit_clk_assigned_sscs_without_consumer.dtso
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+#include "kunit_clk_assigned_rates.h"
+
+&{/} {
+	clk: kunit-clock {
+		compatible = "test,clk-assigned-rates";
+		#clock-cells = <0>;
+	};
+
+	kunit-clock-consumer {
+		compatible = "test,clk-consumer";
+		assigned-clock-sscs = <ASSIGNED_SSCS_0_MODFREQ
+				       ASSIGNED_SSCS_0_SPREAD
+				       ASSIGNED_SSCS_0_METHOD>;
+	};
+};
diff --git a/drivers/clk/kunit_clk_assigned_sscs_zero.dtso b/drivers/clk/kunit_clk_assigned_sscs_zero.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..f39f4e754e532c9c1b1fdf034700e5af1f3f0779
--- /dev/null
+++ b/drivers/clk/kunit_clk_assigned_sscs_zero.dtso
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	clk: kunit-clock {
+		compatible = "test,clk-assigned-rates";
+		#clock-cells = <0>;
+		assigned-clocks = <&clk>;
+		assigned-clock-sscs = <0 0 0>;
+	};
+};
diff --git a/drivers/clk/kunit_clk_assigned_sscs_zero_consumer.dtso b/drivers/clk/kunit_clk_assigned_sscs_zero_consumer.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..d6bd7dfada7e2f455cb23e483b9bd6ce24839e3a
--- /dev/null
+++ b/drivers/clk/kunit_clk_assigned_sscs_zero_consumer.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	clk: kunit-clock {
+		compatible = "test,clk-assigned-rates";
+		#clock-cells = <0>;
+	};
+
+	kunit-clock-consumer {
+		compatible = "test,clk-consumer";
+		assigned-clocks = <&clk>;
+		assigned-clock-sscs = <0 0 0>;
+	};
+};

-- 
2.37.1

Re: [PATCH v8 4/6] clk: Add KUnit tests for assigned-clock-sscs

[Brian Masney]

Hi Peng,

On Mon, Mar 02, 2026 at 11:01:18PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Spread spectrum configuration is part of clock frequency settings,
> and its behavior can be validated similarly to assigned clock rates.
> 
> Extend the existing KUnit tests for assigned-clock-rates to cover
> assigned-clock-sscs by reusing the test framework. Add new test
> device trees:
>   - kunit_clk_assigned_sscs_null.dtso
>   - kunit_clk_assigned_sscs_null_consumer.dtso
>   - kunit_clk_assigned_sscs_without.dtso
>   - kunit_clk_assigned_sscs_without_consumer.dtso
>   - kunit_clk_assigned_sscs_zero.dtso
>   - kunit_clk_assigned_sscs_zero_consumer.dtso
> 
> These tests cover various invalid configurations of assigned-clock-sscs,
> ensuring robustness and consistent error handling, similar to the coverage
> provided for assigned-clock-rates.
> 
> Co-developed-by: Brian Masney <bmasney@redhat.com>
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> Reviewed-by: Sebin Francis <sebin.francis@ti.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>

I'm collecting up patches for Stephen for a git pull. I wanted to
include this series, however I see that the clk kunit tests fail.

[17:34:44] ================= clk_assigned_sscs_skips  =================
[17:34:44] [FAILED] provider missing assigned-clocks
[17:34:44] # clk_assigned_sscs_skips: ASSERTION FAILED at drivers/clk/clk_test.c:3218
[17:34:44] Expected 0 == of_clk_set_defaults(consumer, false), but
[17:34:44]     of_clk_set_defaults(consumer, false) == -2 (0xfffffffffffffffe)
[17:34:44] [FAILED] consumer missing assigned-clocks
[17:34:44] [PASSED] provider assigned-clock-sscs of zero
[17:34:44] [PASSED] consumer assigned-clock-sscs of zero
[17:34:44] # clk_assigned_sscs_skips: ASSERTION FAILED at drivers/clk/clk_test.c:3194
[17:34:44] Expected 0 == of_clk_add_hw_provider_kunit(test, np, of_clk_hw_simple_get, &ctx->clk0.hw), but
[17:34:44]     of_clk_add_hw_provider_kunit(test, np, of_clk_hw_simple_get, &ctx->clk0.hw) == -2 (0xfffffffffffffffe)
[17:34:44] [FAILED] provider assigned-clocks null phandle
[17:34:44] # clk_assigned_sscs_skips: ASSERTION FAILED at drivers/clk/clk_test.c:3218
[17:34:44] Expected 0 == of_clk_set_defaults(consumer, false), but
[17:34:44]     of_clk_set_defaults(consumer, false) == -2 (0xfffffffffffffffe)
[17:34:44] [FAILED] provider assigned-clocks null phandle
[17:34:44] # clk_assigned_sscs_skips: ASSERTION FAILED at drivers/clk/clk_test.c:3194
[17:34:44] Expected 0 == of_clk_add_hw_provider_kunit(test, np, of_clk_hw_simple_get, &ctx->clk0.hw), but
[17:34:44]     of_clk_add_hw_provider_kunit(test, np, of_clk_hw_simple_get, &ctx->clk0.hw) == -2 (0xfffffffffffffffe)
[17:34:44] # clk_assigned_sscs_skips: pass:2 fail:4 skip:0 total:6
[17:34:44] ============= [FAILED] clk_assigned_sscs_skips =============
[17:34:44]     # module: clk_test
[17:34:44] # clk_assigned_rates: pass:3 fail:1 skip:0 total:4
[17:34:44] # Totals: pass:16 fail:4 skip:0 total:20
[17:34:44] =============== [FAILED] clk_assigned_rates ================

Can you look into this? I didn't look in detail, but should the tests be
updated to expect -ENOENT in some cases, such as 'consumer missing
assigned-clocks'?

Brian

[PATCH v8 5/6] clk: scmi: Introduce common header for SCMI clock interface

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

Added a new header file 'clk-scmi.h' to define common structures and
interfaces for the SCMI clock driver. This header will also be used by
OEM-specific extensions to ensure consistency and reusability.

Moved relevant structure definitions from the driver implementation to
'clk-scmi.h' to facilitate shared usage.

Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/clk-scmi.c | 27 +--------------------------
 drivers/clk/clk-scmi.h | 40 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+), 26 deletions(-)

diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c
index 6b286ea6f1218c802d0ebb782c75a19057581c20..bf85924d61985eb9e596419349eb883e3817de73 100644
--- a/drivers/clk/clk-scmi.c
+++ b/drivers/clk/clk-scmi.c
@@ -14,32 +14,7 @@
 #include <linux/scmi_protocol.h>
 #include <asm/div64.h>
 
-#define NOT_ATOMIC	false
-#define ATOMIC		true
-
-enum scmi_clk_feats {
-	SCMI_CLK_ATOMIC_SUPPORTED,
-	SCMI_CLK_STATE_CTRL_SUPPORTED,
-	SCMI_CLK_RATE_CTRL_SUPPORTED,
-	SCMI_CLK_PARENT_CTRL_SUPPORTED,
-	SCMI_CLK_DUTY_CYCLE_SUPPORTED,
-	SCMI_CLK_FEATS_COUNT
-};
-
-#define SCMI_MAX_CLK_OPS	BIT(SCMI_CLK_FEATS_COUNT)
-
-static const struct scmi_clk_proto_ops *scmi_proto_clk_ops;
-
-struct scmi_clk {
-	u32 id;
-	struct device *dev;
-	struct clk_hw hw;
-	const struct scmi_clock_info *info;
-	const struct scmi_protocol_handle *ph;
-	struct clk_parent_data *parent_data;
-};
-
-#define to_scmi_clk(clk) container_of(clk, struct scmi_clk, hw)
+const struct scmi_clk_proto_ops *scmi_proto_clk_ops;
 
 static unsigned long scmi_clk_recalc_rate(struct clk_hw *hw,
 					  unsigned long parent_rate)
diff --git a/drivers/clk/clk-scmi.h b/drivers/clk/clk-scmi.h
new file mode 100644
index 0000000000000000000000000000000000000000..6ef6adc77c836dc2d599ff852cdc941f217ee388
--- /dev/null
+++ b/drivers/clk/clk-scmi.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright 2025 NXP
+ */
+
+#ifndef __SCMI_CLK_H
+#define __SCMI_CLK_H
+
+#include <linux/bits.h>
+#include <linux/scmi_protocol.h>
+#include <linux/types.h>
+
+#define NOT_ATOMIC	false
+#define ATOMIC		true
+
+enum scmi_clk_feats {
+	SCMI_CLK_ATOMIC_SUPPORTED,
+	SCMI_CLK_STATE_CTRL_SUPPORTED,
+	SCMI_CLK_RATE_CTRL_SUPPORTED,
+	SCMI_CLK_PARENT_CTRL_SUPPORTED,
+	SCMI_CLK_DUTY_CYCLE_SUPPORTED,
+	SCMI_CLK_FEATS_COUNT
+};
+
+#define SCMI_MAX_CLK_OPS	BIT(SCMI_CLK_FEATS_COUNT)
+
+struct scmi_clk {
+	u32 id;
+	struct device *dev;
+	struct clk_hw hw;
+	const struct scmi_clock_info *info;
+	const struct scmi_protocol_handle *ph;
+	struct clk_parent_data *parent_data;
+};
+
+#define to_scmi_clk(clk) container_of(clk, struct scmi_clk, hw)
+
+extern const struct scmi_clk_proto_ops *scmi_proto_clk_ops;
+
+#endif

-- 
2.37.1

[PATCH v8 6/6] clk: scmi: Add i.MX95 OEM extension support for SCMI clock driver

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@nxp.com>

 - Introduce 'clk-scmi-oem.c' to support vendor-specific OEM extensions
   for the SCMI clock driver, allows clean integration of vendor-specific
   features without impacting the core SCMI clock driver logic.
 - Extend 'clk-scmi.h' with 'scmi_clk_oem' structure and related
   declarations.
 - Initialize OEM extensions via 'scmi_clk_oem_init()'.
 - Support querying OEM-specific features and setting spread spectrum.
 - Pass 'scmi_device' to 'scmi_clk_ops_select()' for OEM data access.

Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/Makefile       |   2 +-
 drivers/clk/clk-scmi-oem.c | 108 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/clk-scmi.c     |  19 ++++++--
 drivers/clk/clk-scmi.h     |  11 +++++
 4 files changed, 136 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e053303984b8d61d5c74dc4cdb582eb2692f4ca1..ae069836f29c2af373e56d66f4e1d6ffa32be7b5 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -93,7 +93,7 @@ obj-$(CONFIG_COMMON_CLK_RP1)            += clk-rp1.o
 obj-$(CONFIG_COMMON_CLK_RPMI)		+= clk-rpmi.o
 obj-$(CONFIG_COMMON_CLK_HI655X)		+= clk-hi655x.o
 obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
-obj-$(CONFIG_COMMON_CLK_SCMI)           += clk-scmi.o
+obj-$(CONFIG_COMMON_CLK_SCMI)           += clk-scmi.o clk-scmi-oem.o
 obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o
 obj-$(CONFIG_COMMON_CLK_SI5341)		+= clk-si5341.o
 obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
diff --git a/drivers/clk/clk-scmi-oem.c b/drivers/clk/clk-scmi-oem.c
new file mode 100644
index 0000000000000000000000000000000000000000..be11d359b4ec3633868f33bb429c7cfec9f1e48e
--- /dev/null
+++ b/drivers/clk/clk-scmi-oem.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The Vendor OEM extension for System Control and Power Interface (SCMI)
+ * Protocol based clock driver
+ *
+ * Copyright 2025 NXP
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/scmi_imx_protocol.h>
+#include <linux/scmi_protocol.h>
+
+#include "clk-scmi.h"
+
+#define SCMI_CLOCK_CFG_IMX_SSC			0x80
+#define SCMI_CLOCK_IMX_SS_PERCENTAGE_MASK	GENMASK(7, 0)
+#define SCMI_CLOCK_IMX_SS_MOD_FREQ_MASK		GENMASK(23, 8)
+#define SCMI_CLOCK_IMX_SS_ENABLE_MASK		BIT(24)
+
+/*
+ * Selection is based on SCMI vendor_id/sub_vendor_id and optional machine
+ * compatible string, without involving impl_ver. impl_ver‑specific behavior
+ * should be considered a bug and handled via SCMI Quirk framework.
+ */
+struct scmi_clk_oem_info {
+	char *vendor_id;
+	char *sub_vendor_id;
+	char *compatible;
+	const void *data;
+};
+
+static int
+scmi_clk_imx_set_spread_spectrum(struct clk_hw *hw,
+				 const struct clk_spread_spectrum *ss_conf)
+{
+	struct scmi_clk *clk = to_scmi_clk(hw);
+	int ret;
+	u32 val;
+
+	/*
+	 * extConfigValue[7:0]   - spread percentage (%)
+	 * extConfigValue[23:8]  - Modulation Frequency
+	 * extConfigValue[24]    - Enable/Disable
+	 * extConfigValue[31:25] - Reserved
+	 */
+	val = FIELD_PREP(SCMI_CLOCK_IMX_SS_PERCENTAGE_MASK, ss_conf->spread_bp / 10000);
+	val |= FIELD_PREP(SCMI_CLOCK_IMX_SS_MOD_FREQ_MASK, ss_conf->modfreq_hz);
+	if (ss_conf->method != CLK_SPREAD_NO)
+		val |= SCMI_CLOCK_IMX_SS_ENABLE_MASK;
+	ret = scmi_proto_clk_ops->config_oem_set(clk->ph, clk->id,
+						 SCMI_CLOCK_CFG_IMX_SSC,
+						 val, false);
+	if (ret)
+		dev_warn(clk->dev,
+			 "Failed to set spread spectrum(%u,%u,%u) for clock ID %d\n",
+			 ss_conf->modfreq_hz, ss_conf->spread_bp, ss_conf->method,
+			 clk->id);
+
+	return ret;
+}
+
+static int
+scmi_clk_imx_query_oem_feats(const struct scmi_protocol_handle *ph, u32 id,
+			     unsigned int *feats_key)
+{
+	int ret;
+	u32 val;
+
+	ret = scmi_proto_clk_ops->config_oem_get(ph, id,
+						 SCMI_CLOCK_CFG_IMX_SSC,
+						 &val, NULL, false);
+	if (!ret)
+		*feats_key |= BIT(SCMI_CLK_EXT_OEM_SSC_SUPPORTED);
+
+	return 0;
+}
+
+static const struct scmi_clk_oem scmi_clk_oem_imx = {
+	.query_ext_oem_feats = scmi_clk_imx_query_oem_feats,
+	.set_spread_spectrum = scmi_clk_imx_set_spread_spectrum,
+};
+
+static const struct scmi_clk_oem_info info[] = {
+	{ SCMI_IMX_VENDOR, SCMI_IMX_SUBVENDOR, NULL, &scmi_clk_oem_imx },
+};
+
+int scmi_clk_oem_init(struct scmi_device *sdev)
+{
+	const struct scmi_handle *handle = sdev->handle;
+	int i, size = ARRAY_SIZE(info);
+
+	for (i = 0; i < size; i++) {
+		if (strcmp(handle->version->vendor_id, info[i].vendor_id) ||
+		    strcmp(handle->version->sub_vendor_id, info[i].sub_vendor_id))
+			continue;
+		if (info[i].compatible &&
+		    !of_machine_is_compatible(info[i].compatible))
+			continue;
+
+		break;
+	}
+
+	if (i < size)
+		dev_set_drvdata(&sdev->dev, (void *)info[i].data);
+
+	return 0;
+}
diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c
index bf85924d61985eb9e596419349eb883e3817de73..1ed2091e3d4a951c8662db4c94dee4b9c98b8326 100644
--- a/drivers/clk/clk-scmi.c
+++ b/drivers/clk/clk-scmi.c
@@ -14,6 +14,8 @@
 #include <linux/scmi_protocol.h>
 #include <asm/div64.h>
 
+#include "clk-scmi.h"
+
 const struct scmi_clk_proto_ops *scmi_proto_clk_ops;
 
 static unsigned long scmi_clk_recalc_rate(struct clk_hw *hw,
@@ -242,6 +244,7 @@ static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk,
 static const struct clk_ops *
 scmi_clk_ops_alloc(struct device *dev, unsigned long feats_key)
 {
+	struct scmi_clk_oem *oem_data = dev_get_drvdata(dev);
 	struct clk_ops *ops;
 
 	ops = devm_kzalloc(dev, sizeof(*ops), GFP_KERNEL);
@@ -288,11 +291,15 @@ scmi_clk_ops_alloc(struct device *dev, unsigned long feats_key)
 		ops->set_duty_cycle = scmi_clk_set_duty_cycle;
 	}
 
+	if (oem_data && (feats_key & BIT(SCMI_CLK_EXT_OEM_SSC_SUPPORTED)))
+		ops->set_spread_spectrum = oem_data->set_spread_spectrum;
+
 	return ops;
 }
 
 /**
  * scmi_clk_ops_select() - Select a proper set of clock operations
+ * @sdev: pointer to the SCMI device
  * @sclk: A reference to an SCMI clock descriptor
  * @atomic_capable: A flag to indicate if atomic mode is supported by the
  *		    transport
@@ -317,8 +324,8 @@ scmi_clk_ops_alloc(struct device *dev, unsigned long feats_key)
  *	   NULL otherwise.
  */
 static const struct clk_ops *
-scmi_clk_ops_select(struct scmi_clk *sclk, bool atomic_capable,
-		    unsigned int atomic_threshold_us,
+scmi_clk_ops_select(struct scmi_device *sdev, struct scmi_clk *sclk,
+		    bool atomic_capable, unsigned int atomic_threshold_us,
 		    const struct clk_ops **clk_ops_db, size_t db_size)
 {
 	int ret;
@@ -326,6 +333,7 @@ scmi_clk_ops_select(struct scmi_clk *sclk, bool atomic_capable,
 	const struct scmi_clock_info *ci = sclk->info;
 	unsigned int feats_key = 0;
 	const struct clk_ops *ops;
+	struct scmi_clk_oem *oem_data = dev_get_drvdata(&sdev->dev);
 
 	/*
 	 * Note that when transport is atomic but SCMI protocol did not
@@ -350,6 +358,9 @@ scmi_clk_ops_select(struct scmi_clk *sclk, bool atomic_capable,
 						 &val, NULL, false);
 		if (!ret)
 			feats_key |= BIT(SCMI_CLK_DUTY_CYCLE_SUPPORTED);
+
+		if (oem_data && oem_data->query_ext_oem_feats)
+			oem_data->query_ext_oem_feats(sclk->ph, sclk->id, &feats_key);
 	}
 
 	if (WARN_ON(feats_key >= db_size))
@@ -407,6 +418,8 @@ static int scmi_clocks_probe(struct scmi_device *sdev)
 	clk_data->num = count;
 	hws = clk_data->hws;
 
+	scmi_clk_oem_init(sdev);
+
 	transport_is_atomic = handle->is_transport_atomic(handle,
 							  &atomic_threshold_us);
 
@@ -438,7 +451,7 @@ static int scmi_clocks_probe(struct scmi_device *sdev)
 		 * to avoid sharing the devm_ allocated clk_ops between multiple
 		 * SCMI clk driver instances.
 		 */
-		scmi_ops = scmi_clk_ops_select(sclk, transport_is_atomic,
+		scmi_ops = scmi_clk_ops_select(sdev, sclk, transport_is_atomic,
 					       atomic_threshold_us,
 					       scmi_clk_ops_db,
 					       ARRAY_SIZE(scmi_clk_ops_db));
diff --git a/drivers/clk/clk-scmi.h b/drivers/clk/clk-scmi.h
index 6ef6adc77c836dc2d599ff852cdc941f217ee388..d7f63f36c56d155f728325efd6bcf7fe2585b170 100644
--- a/drivers/clk/clk-scmi.h
+++ b/drivers/clk/clk-scmi.h
@@ -7,6 +7,7 @@
 #define __SCMI_CLK_H
 
 #include <linux/bits.h>
+#include <linux/clk-provider.h>
 #include <linux/scmi_protocol.h>
 #include <linux/types.h>
 
@@ -19,6 +20,7 @@ enum scmi_clk_feats {
 	SCMI_CLK_RATE_CTRL_SUPPORTED,
 	SCMI_CLK_PARENT_CTRL_SUPPORTED,
 	SCMI_CLK_DUTY_CYCLE_SUPPORTED,
+	SCMI_CLK_EXT_OEM_SSC_SUPPORTED,
 	SCMI_CLK_FEATS_COUNT
 };
 
@@ -37,4 +39,13 @@ struct scmi_clk {
 
 extern const struct scmi_clk_proto_ops *scmi_proto_clk_ops;
 
+struct scmi_clk_oem {
+	int (*query_ext_oem_feats)(const struct scmi_protocol_handle *ph,
+				   u32 id, unsigned int *feats_key);
+	int (*set_spread_spectrum)(struct clk_hw *hw,
+				   const struct clk_spread_spectrum *ss_conf);
+};
+
+int scmi_clk_oem_init(struct scmi_device *dev);
+
 #endif

-- 
2.37.1