Re: [PATCH v3 4/4] phy: qcom-qmp: Add SW reset register

[Can Guo <cang@codeaurora.org>]

On 2019-12-23 22:30, Vinod Koul wrote:
> For V4 QMP UFS Phy, we need to assert reset bits, configure the phy and
> then deassert it, so add the QPHY_SW_RESET register which does this.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Can Guo <cang@codeaurora.org>

> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c
> b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index ce5e18f188c3..7db2a94f7a99 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -168,6 +168,7 @@ static const unsigned int 
> sdm845_ufsphy_regs_layout[] = {
>  static const unsigned int sm8150_ufsphy_regs_layout[] = {
>  	[QPHY_START_CTRL]		= QPHY_V4_PHY_START,
>  	[QPHY_PCS_READY_STATUS]		= QPHY_V4_PCS_READY_STATUS,
> +	[QPHY_SW_RESET]			= QPHY_V4_SW_RESET,
>  };
> 
>  static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {