Re: [PATCH v4 4/4] platform/x86: int3472: Add support for GPIO type 0x02 (strobe LED)

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Fri, Mar 27, 2026 at 10:07:53AM +0100, Marco Nenciarini wrote:
> Some ACPI INT3472 devices include a GPIO with DSM type 0x02, used for
> IR flood (strobe) illumination. This GPIO type was previously
> unhandled, resulting in the following warning during probe:
> 
>   int3472-discrete INT3472:00: GPIO type 0x02 unknown; the sensor
>   may not work
> 
> Add INT3472_GPIO_TYPE_STROBE (0x02) handling that registers the GPIO
> as an LED class device via skl_int3472_register_led(). Unlike the
> privacy LED, the strobe LED is not consumed by the sensor driver, so
> no LED lookup is registered.

...

>  	[INT3472_LED_TYPE_PRIVACY] = "privacy",
> +	[INT3472_LED_TYPE_STROBE]  = "strobe",

This was renamed between the versions. Did I miss explanation "why"?

>  };
>  
>  static const char * const int3472_led_con_ids[] = {
>  	[INT3472_LED_TYPE_PRIVACY] = "privacy",
> +	[INT3472_LED_TYPE_STROBE]  = NULL,
>  };

Not sure if this is better than passing a boolean parameter to the function.

-- 
With Best Regards,
Andy Shevchenko