[PATCH] libertas: Don't mark exported symbols as static

[PATCH] libertas: Don't mark exported symbols as static

[Roland Dreier]

Marking exported symbols as static causes the following build error on
ia64 with gcc 4.2.3:

drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict

Therefore, remove the static marking on lbs_remove_mesh and lbs_add_mesh.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 84fb49c..a688ce8 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -253,8 +253,8 @@ static ssize_t lbs_anycast_set(struct device *dev,
 
 static int lbs_add_rtap(struct lbs_private *priv);
 static void lbs_remove_rtap(struct lbs_private *priv);
-static int lbs_add_mesh(struct lbs_private *priv);
-static void lbs_remove_mesh(struct lbs_private *priv);
+int lbs_add_mesh(struct lbs_private *priv);
+void lbs_remove_mesh(struct lbs_private *priv);
 
 
 /**
@@ -1296,7 +1296,7 @@ EXPORT_SYMBOL_GPL(lbs_stop_card);
  *  @param priv    A pointer to the struct lbs_private structure
  *  @return 	   0 if successful, -X otherwise
  */
-static int lbs_add_mesh(struct lbs_private *priv)
+int lbs_add_mesh(struct lbs_private *priv)
 {
 	struct net_device *mesh_dev = NULL;
 	int ret = 0;
@@ -1354,7 +1354,7 @@ done:
 EXPORT_SYMBOL_GPL(lbs_add_mesh);
 
 
-static void lbs_remove_mesh(struct lbs_private *priv)
+void lbs_remove_mesh(struct lbs_private *priv)
 {
 	struct net_device *mesh_dev;
 

Re: [PATCH] libertas: Don't mark exported symbols as static

[Stephen Hemminger]

On Fri, 08 Feb 2008 16:07:26 -0800
Roland Dreier <rdreier@cisco.com> wrote:

> Marking exported symbols as static causes the following build error on
> ia64 with gcc 4.2.3:
> 
> drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
> drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict
> 
> Therefore, remove the static marking on lbs_remove_mesh and lbs_add_mesh.
> 
> Signed-off-by: Roland Dreier <rolandd@cisco.com>
> ---
> diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
> index 84fb49c..a688ce8 100644
> --- a/drivers/net/wireless/libertas/main.c
> +++ b/drivers/net/wireless/libertas/main.c
> @@ -253,8 +253,8 @@ static ssize_t lbs_anycast_set(struct device *dev,
>  
>  static int lbs_add_rtap(struct lbs_private *priv);
>  static void lbs_remove_rtap(struct lbs_private *priv);
> -static int lbs_add_mesh(struct lbs_private *priv);
> -static void lbs_remove_mesh(struct lbs_private *priv);
> +int lbs_add_mesh(struct lbs_private *priv);
> +void lbs_remove_mesh(struct lbs_private *priv);
>  
>  
>  /**
> @@ -1296,7 +1296,7 @@ EXPORT_SYMBOL_GPL(lbs_stop_card);
>   *  @param priv    A pointer to the struct lbs_private structure
>   *  @return 	   0 if successful, -X otherwise
>   */
> -static int lbs_add_mesh(struct lbs_private *priv)
> +int lbs_add_mesh(struct lbs_private *priv)
>  {
>  	struct net_device *mesh_dev = NULL;
>  	int ret = 0;
> @@ -1354,7 +1354,7 @@ done:
>  EXPORT_SYMBOL_GPL(lbs_add_mesh);
>  
>  
> -static void lbs_remove_mesh(struct lbs_private *priv)
> +void lbs_remove_mesh(struct lbs_private *priv)
>  {
>  	struct net_device *mesh_dev;
>  
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Why not pull the exports? they aren't used anywhere in the existing kernel.

-- 
Stephen Hemminger <stephen.hemminger@vyatta.com>

Re: [PATCH] libertas: Don't mark exported symbols as static

[Roland Dreier]

 > Why not pull the exports? they aren't used anywhere in the existing kernel.

I'm guessing there's some not-(yet-)merged mesh networking stuff that
uses the symbols, but it doesn't matter much to me...

 - R.

Re: [PATCH] libertas: Don't mark exported symbols as static

[Christoph Hellwig]

On Fri, Feb 08, 2008 at 06:01:02PM -0800, Roland Dreier wrote:
>  > Why not pull the exports? they aren't used anywhere in the existing kernel.
> 
> I'm guessing there's some not-(yet-)merged mesh networking stuff that
> uses the symbols, but it doesn't matter much to me...

The general rule is to not keep symbols for out of tree stuff, so
removing the exports makes more sense.

Re: [PATCH] libertas: Don't mark exported symbols as static

[Dan Williams]

On Fri, 2008-02-08 at 23:48 -0500, Christoph Hellwig wrote:
> On Fri, Feb 08, 2008 at 06:01:02PM -0800, Roland Dreier wrote:
> >  > Why not pull the exports? they aren't used anywhere in the existing kernel.
> > 
> > I'm guessing there's some not-(yet-)merged mesh networking stuff that
> > uses the symbols, but it doesn't matter much to me...
> 
> The general rule is to not keep symbols for out of tree stuff, so
> removing the exports makes more sense.

If they aren't used in the in-kernel driver, just kill the export
statements.

Dan

[PATCH] libertas: Remove unused exports

[Roland Dreier]

The libertas driver exports a number of symbols with no in-tree
users; remove these unused exports.  lbs_reset_device() is completely
unused, with no callers at all, so remove the function completely.

A couple of these unused exported symbols are static, which causes the
following build error on ia64 with gcc 4.2.3:

    drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
    drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict

This patch fixes this problem.  I don't have hardware, so this is not
run-tested, but I tested the build with

    CONFIG_LIBERTAS=y
    CONFIG_LIBERTAS_USB=m
    CONFIG_LIBERTAS_CS=m
    CONFIG_LIBERTAS_SDIO=m

and there were no problems with undefined symbols.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
Here's the patch that removes the unused exports (and a few more that
I found).

diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index eab0203..b3c1acb 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
 	lbs_deb_leave(LBS_DEB_CMD);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_mesh_access);
 
 int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
 {
@@ -1576,7 +1575,6 @@ done:
 	lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
 
 /**
  *  @brief This function allocates the command buffer and link
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index aaacd9b..4e22341 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
 int lbs_remove_card(struct lbs_private *priv);
 int lbs_start_card(struct lbs_private *priv);
 int lbs_stop_card(struct lbs_private *priv);
-int lbs_reset_device(struct lbs_private *priv);
 void lbs_host_to_card_done(struct lbs_private *priv);
 
 int lbs_update_channel(struct lbs_private *priv);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 84fb49c..1eaf6af 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1351,8 +1350,6 @@ done:
 	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_add_mesh);
-
 
 static void lbs_remove_mesh(struct lbs_private *priv)
 {
@@ -1372,7 +1369,6 @@ static void lbs_remove_mesh(struct lbs_private *priv)
 	free_netdev(mesh_dev);
 	lbs_deb_leave(LBS_DEB_MESH);
 }
-EXPORT_SYMBOL_GPL(lbs_remove_mesh);
 
 /**
  *  @brief This function finds the CFP in
@@ -1458,20 +1454,6 @@ void lbs_interrupt(struct lbs_private *priv)
 }
 EXPORT_SYMBOL_GPL(lbs_interrupt);
 
-int lbs_reset_device(struct lbs_private *priv)
-{
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_MAIN);
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
-				    CMD_ACT_HALT, 0, 0, NULL);
-	msleep_interruptible(10);
-
-	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_reset_device);
-
 static int __init lbs_init_module(void)
 {
 	lbs_deb_enter(LBS_DEB_MAIN);

[PATCH RESEND] libertas: Remove unused exports

[Roland Dreier]

Any chance of getting this applied?  It seems the build is still
broken on ia64 at least due to the export of static functions.
---


The libertas driver exports a number of symbols with no in-tree
users; remove these unused exports.  lbs_reset_device() is completely
unused, with no callers at all, so remove the function completely.

A couple of these unused exported symbols are static, which causes the
following build error on ia64 with gcc 4.2.3:

    drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
    drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict

This patch fixes this problem.  I don't have hardware, so this is not
run-tested, but I tested the build with

    CONFIG_LIBERTAS=y
    CONFIG_LIBERTAS_USB=m
    CONFIG_LIBERTAS_CS=m
    CONFIG_LIBERTAS_SDIO=m

and there were no problems with undefined symbols.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index eab0203..b3c1acb 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
 	lbs_deb_leave(LBS_DEB_CMD);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_mesh_access);
 
 int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
 {
@@ -1576,7 +1575,6 @@ done:
 	lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
 
 /**
  *  @brief This function allocates the command buffer and link
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index aaacd9b..4e22341 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
 int lbs_remove_card(struct lbs_private *priv);
 int lbs_start_card(struct lbs_private *priv);
 int lbs_stop_card(struct lbs_private *priv);
-int lbs_reset_device(struct lbs_private *priv);
 void lbs_host_to_card_done(struct lbs_private *priv);
 
 int lbs_update_channel(struct lbs_private *priv);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 84fb49c..1eaf6af 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1351,8 +1350,6 @@ done:
 	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_add_mesh);
-
 
 static void lbs_remove_mesh(struct lbs_private *priv)
 {
@@ -1372,7 +1369,6 @@ static void lbs_remove_mesh(struct lbs_private *priv)
 	free_netdev(mesh_dev);
 	lbs_deb_leave(LBS_DEB_MESH);
 }
-EXPORT_SYMBOL_GPL(lbs_remove_mesh);
 
 /**
  *  @brief This function finds the CFP in
@@ -1458,20 +1454,6 @@ void lbs_interrupt(struct lbs_private *priv)
 }
 EXPORT_SYMBOL_GPL(lbs_interrupt);
 
-int lbs_reset_device(struct lbs_private *priv)
-{
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_MAIN);
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
-				    CMD_ACT_HALT, 0, 0, NULL);
-	msleep_interruptible(10);
-
-	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_reset_device);
-
 static int __init lbs_init_module(void)
 {
 	lbs_deb_enter(LBS_DEB_MAIN);

Re: [PATCH RESEND] libertas: Remove unused exports

[Dan Williams]

On Sat, 2008-02-23 at 20:10 -0800, Roland Dreier wrote:
> Any chance of getting this applied?  It seems the build is still
> broken on ia64 at least due to the export of static functions.
> ---

Normal route is to linux-wireless@...

However; if the symbols aren't used anywhere in
drivers/net/wireless/libertas/*, it makes no sense to keep them around &
exported.

Acked-by: Dan Williams <dcbw@redhat.com>

> 
> The libertas driver exports a number of symbols with no in-tree
> users; remove these unused exports.  lbs_reset_device() is completely
> unused, with no callers at all, so remove the function completely.
> 
> A couple of these unused exported symbols are static, which causes the
> following build error on ia64 with gcc 4.2.3:
> 
>     drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
>     drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict
> 
> This patch fixes this problem.  I don't have hardware, so this is not
> run-tested, but I tested the build with
> 
>     CONFIG_LIBERTAS=y
>     CONFIG_LIBERTAS_USB=m
>     CONFIG_LIBERTAS_CS=m
>     CONFIG_LIBERTAS_SDIO=m
> 
> and there were no problems with undefined symbols.
> 
> Signed-off-by: Roland Dreier <rolandd@cisco.com>
> ---
> diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
> index eab0203..b3c1acb 100644
> --- a/drivers/net/wireless/libertas/cmd.c
> +++ b/drivers/net/wireless/libertas/cmd.c
> @@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
>  	lbs_deb_leave(LBS_DEB_CMD);
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(lbs_mesh_access);
>  
>  int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
>  {
> @@ -1576,7 +1575,6 @@ done:
>  	lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
>  
>  /**
>   *  @brief This function allocates the command buffer and link
> diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
> index aaacd9b..4e22341 100644
> --- a/drivers/net/wireless/libertas/decl.h
> +++ b/drivers/net/wireless/libertas/decl.h
> @@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
>  int lbs_remove_card(struct lbs_private *priv);
>  int lbs_start_card(struct lbs_private *priv);
>  int lbs_stop_card(struct lbs_private *priv);
> -int lbs_reset_device(struct lbs_private *priv);
>  void lbs_host_to_card_done(struct lbs_private *priv);
>  
>  int lbs_update_channel(struct lbs_private *priv);
> diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
> index 84fb49c..1eaf6af 100644
> --- a/drivers/net/wireless/libertas/main.c
> +++ b/drivers/net/wireless/libertas/main.c
> @@ -1351,8 +1350,6 @@ done:
>  	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(lbs_add_mesh);
> -
>  
>  static void lbs_remove_mesh(struct lbs_private *priv)
>  {
> @@ -1372,7 +1369,6 @@ static void lbs_remove_mesh(struct lbs_private *priv)
>  	free_netdev(mesh_dev);
>  	lbs_deb_leave(LBS_DEB_MESH);
>  }
> -EXPORT_SYMBOL_GPL(lbs_remove_mesh);
>  
>  /**
>   *  @brief This function finds the CFP in
> @@ -1458,20 +1454,6 @@ void lbs_interrupt(struct lbs_private *priv)
>  }
>  EXPORT_SYMBOL_GPL(lbs_interrupt);
>  
> -int lbs_reset_device(struct lbs_private *priv)
> -{
> -	int ret;
> -
> -	lbs_deb_enter(LBS_DEB_MAIN);
> -	ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
> -				    CMD_ACT_HALT, 0, 0, NULL);
> -	msleep_interruptible(10);
> -
> -	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
> -	return ret;
> -}
> -EXPORT_SYMBOL_GPL(lbs_reset_device);
> -
>  static int __init lbs_init_module(void)
>  {
>  	lbs_deb_enter(LBS_DEB_MAIN);

Re: [PATCH RESEND] libertas: Remove unused exports

[Dan Williams]

On Sat, 2008-02-23 at 20:10 -0800, Roland Dreier wrote:
> Any chance of getting this applied?  It seems the build is still
> broken on ia64 at least due to the export of static functions.
> ---

Normal route is to linux-wireless@...

However; if the symbols aren't used anywhere in
drivers/net/wireless/libertas/*, it makes no sense to keep them around &
exported.

Acked-by: Dan Williams <dcbw-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

> 
> The libertas driver exports a number of symbols with no in-tree
> users; remove these unused exports.  lbs_reset_device() is completely
> unused, with no callers at all, so remove the function completely.
> 
> A couple of these unused exported symbols are static, which causes the
> following build error on ia64 with gcc 4.2.3:
> 
>     drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
>     drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict
> 
> This patch fixes this problem.  I don't have hardware, so this is not
> run-tested, but I tested the build with
> 
>     CONFIG_LIBERTAS=y
>     CONFIG_LIBERTAS_USB=m
>     CONFIG_LIBERTAS_CS=m
>     CONFIG_LIBERTAS_SDIO=m
> 
> and there were no problems with undefined symbols.
> 
> Signed-off-by: Roland Dreier <rolandd-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
> ---
> diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
> index eab0203..b3c1acb 100644
> --- a/drivers/net/wireless/libertas/cmd.c
> +++ b/drivers/net/wireless/libertas/cmd.c
> @@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
>  	lbs_deb_leave(LBS_DEB_CMD);
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(lbs_mesh_access);
>  
>  int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
>  {
> @@ -1576,7 +1575,6 @@ done:
>  	lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
>  
>  /**
>   *  @brief This function allocates the command buffer and link
> diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
> index aaacd9b..4e22341 100644
> --- a/drivers/net/wireless/libertas/decl.h
> +++ b/drivers/net/wireless/libertas/decl.h
> @@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
>  int lbs_remove_card(struct lbs_private *priv);
>  int lbs_start_card(struct lbs_private *priv);
>  int lbs_stop_card(struct lbs_private *priv);
> -int lbs_reset_device(struct lbs_private *priv);
>  void lbs_host_to_card_done(struct lbs_private *priv);
>  
>  int lbs_update_channel(struct lbs_private *priv);
> diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
> index 84fb49c..1eaf6af 100644
> --- a/drivers/net/wireless/libertas/main.c
> +++ b/drivers/net/wireless/libertas/main.c
> @@ -1351,8 +1350,6 @@ done:
>  	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(lbs_add_mesh);
> -
>  
>  static void lbs_remove_mesh(struct lbs_private *priv)
>  {
> @@ -1372,7 +1369,6 @@ static void lbs_remove_mesh(struct lbs_private *priv)
>  	free_netdev(mesh_dev);
>  	lbs_deb_leave(LBS_DEB_MESH);
>  }
> -EXPORT_SYMBOL_GPL(lbs_remove_mesh);
>  
>  /**
>   *  @brief This function finds the CFP in
> @@ -1458,20 +1454,6 @@ void lbs_interrupt(struct lbs_private *priv)
>  }
>  EXPORT_SYMBOL_GPL(lbs_interrupt);
>  
> -int lbs_reset_device(struct lbs_private *priv)
> -{
> -	int ret;
> -
> -	lbs_deb_enter(LBS_DEB_MAIN);
> -	ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
> -				    CMD_ACT_HALT, 0, 0, NULL);
> -	msleep_interruptible(10);
> -
> -	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
> -	return ret;
> -}
> -EXPORT_SYMBOL_GPL(lbs_reset_device);
> -
>  static int __init lbs_init_module(void)
>  {
>  	lbs_deb_enter(LBS_DEB_MAIN);

[PATCH] libertas: Remove unused exports

[Holger Schurig]

From: Roland Dreier <rdreier@cisco.com>

The libertas driver exports a number of symbols with no in-tree users;
remove these unused exports.  lbs_reset_device() is completely unused, with
no callers at all, so remove the function completely.

A couple of these unused exported symbols are static, which causes the
following build error on ia64 with gcc 4.2.3:

    drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
    drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de>


Index: wireless-2.6/drivers/net/wireless/libertas/cmd.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/libertas/cmd.c	2008-02-26 11:53:55.000000000 +0100
+++ wireless-2.6/drivers/net/wireless/libertas/cmd.c	2008-02-26 11:54:29.000000000 +0100
@@ -1066,7 +1066,6 @@ int lbs_mesh_access(struct lbs_private *
 	lbs_deb_leave(LBS_DEB_CMD);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_mesh_access);
 
 int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
 {
@@ -1571,7 +1570,6 @@ done:
 	lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
 
 /**
  *  @brief This function allocates the command buffer and link
Index: wireless-2.6/drivers/net/wireless/libertas/decl.h
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/libertas/decl.h	2008-02-26 11:54:33.000000000 +0100
+++ wireless-2.6/drivers/net/wireless/libertas/decl.h	2008-02-26 11:54:44.000000000 +0100
@@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *c
 int lbs_remove_card(struct lbs_private *priv);
 int lbs_start_card(struct lbs_private *priv);
 int lbs_stop_card(struct lbs_private *priv);
-int lbs_reset_device(struct lbs_private *priv);
 void lbs_host_to_card_done(struct lbs_private *priv);
 
 int lbs_update_channel(struct lbs_private *priv);
Index: wireless-2.6/drivers/net/wireless/libertas/main.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/libertas/main.c	2008-02-26 11:54:54.000000000 +0100
+++ wireless-2.6/drivers/net/wireless/libertas/main.c	2008-02-26 11:55:28.000000000 +0100
@@ -1366,8 +1366,6 @@ done:
 	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_add_mesh);
-
 
 static void lbs_remove_mesh(struct lbs_private *priv)
 {
@@ -1387,7 +1385,6 @@ static void lbs_remove_mesh(struct lbs_p
 	free_netdev(mesh_dev);
 	lbs_deb_leave(LBS_DEB_MESH);
 }
-EXPORT_SYMBOL_GPL(lbs_remove_mesh);
 
 /**
  *  @brief This function finds the CFP in
@@ -1473,20 +1470,6 @@ void lbs_interrupt(struct lbs_private *p
 }
 EXPORT_SYMBOL_GPL(lbs_interrupt);
 
-int lbs_reset_device(struct lbs_private *priv)
-{
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_MAIN);
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
-				    CMD_ACT_HALT, 0, 0, NULL);
-	msleep_interruptible(10);
-
-	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_reset_device);
-
 static int __init lbs_init_module(void)
 {
 	lbs_deb_enter(LBS_DEB_MAIN);

Re: [PATCH] libertas: Remove unused exports

[Dan Williams]

On Tue, 2008-02-26 at 15:26 +0100, Holger Schurig wrote:
> From: Roland Dreier <rdreier@cisco.com>
> 
> The libertas driver exports a number of symbols with no in-tree users;
> remove these unused exports.  lbs_reset_device() is completely unused, with
> no callers at all, so remove the function completely.
> 
> A couple of these unused exported symbols are static, which causes the
> following build error on ia64 with gcc 4.2.3:
> 
>     drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
>     drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict
> 
> Signed-off-by: Roland Dreier <rolandd@cisco.com>
> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de>

I acked it on netdev too while forwarding to linux-wireless yesterday.
For completeness:

Acked-by: Dan Williams <dcbw@redhat.com>

> 
> 
> Index: wireless-2.6/drivers/net/wireless/libertas/cmd.c
> ===================================================================
> --- wireless-2.6.orig/drivers/net/wireless/libertas/cmd.c	2008-02-26 11:53:55.000000000 +0100
> +++ wireless-2.6/drivers/net/wireless/libertas/cmd.c	2008-02-26 11:54:29.000000000 +0100
> @@ -1066,7 +1066,6 @@ int lbs_mesh_access(struct lbs_private *
>  	lbs_deb_leave(LBS_DEB_CMD);
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(lbs_mesh_access);
>  
>  int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
>  {
> @@ -1571,7 +1570,6 @@ done:
>  	lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
>  
>  /**
>   *  @brief This function allocates the command buffer and link
> Index: wireless-2.6/drivers/net/wireless/libertas/decl.h
> ===================================================================
> --- wireless-2.6.orig/drivers/net/wireless/libertas/decl.h	2008-02-26 11:54:33.000000000 +0100
> +++ wireless-2.6/drivers/net/wireless/libertas/decl.h	2008-02-26 11:54:44.000000000 +0100
> @@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *c
>  int lbs_remove_card(struct lbs_private *priv);
>  int lbs_start_card(struct lbs_private *priv);
>  int lbs_stop_card(struct lbs_private *priv);
> -int lbs_reset_device(struct lbs_private *priv);
>  void lbs_host_to_card_done(struct lbs_private *priv);
>  
>  int lbs_update_channel(struct lbs_private *priv);
> Index: wireless-2.6/drivers/net/wireless/libertas/main.c
> ===================================================================
> --- wireless-2.6.orig/drivers/net/wireless/libertas/main.c	2008-02-26 11:54:54.000000000 +0100
> +++ wireless-2.6/drivers/net/wireless/libertas/main.c	2008-02-26 11:55:28.000000000 +0100
> @@ -1366,8 +1366,6 @@ done:
>  	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(lbs_add_mesh);
> -
>  
>  static void lbs_remove_mesh(struct lbs_private *priv)
>  {
> @@ -1387,7 +1385,6 @@ static void lbs_remove_mesh(struct lbs_p
>  	free_netdev(mesh_dev);
>  	lbs_deb_leave(LBS_DEB_MESH);
>  }
> -EXPORT_SYMBOL_GPL(lbs_remove_mesh);
>  
>  /**
>   *  @brief This function finds the CFP in
> @@ -1473,20 +1470,6 @@ void lbs_interrupt(struct lbs_private *p
>  }
>  EXPORT_SYMBOL_GPL(lbs_interrupt);
>  
> -int lbs_reset_device(struct lbs_private *priv)
> -{
> -	int ret;
> -
> -	lbs_deb_enter(LBS_DEB_MAIN);
> -	ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
> -				    CMD_ACT_HALT, 0, 0, NULL);
> -	msleep_interruptible(10);
> -
> -	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
> -	return ret;
> -}
> -EXPORT_SYMBOL_GPL(lbs_reset_device);
> -
>  static int __init lbs_init_module(void)
>  {
>  	lbs_deb_enter(LBS_DEB_MAIN);