* [PATCH 0/2] IB/ehca: Return physical link information, fix static rate calculation @ 2007-11-02 13:32 ` Joachim Fenkes 0 siblings, 0 replies; 8+ messages in thread From: Joachim Fenkes @ 2007-11-02 13:32 UTC (permalink / raw) To: LinuxPPC-Dev, LKML, OF-General, Roland Dreier, OF-EWG Cc: Stefan Roscher, Christoph Raisch This patchset will fix static rate calculation for the new link speeds supported by eHCA2. Also, it enables query_port() to return physical link information instead of constant values, which is needed for the static rate fix. [1/2] makes query_port() return actual physical link info where supported [2/2] fixes static rate calculation based on that info The patches will apply, in order, on top of Roland's for-2.6.24 branch. Please review them and apply for 2.6.24-rc2 if you think they're okay. Thanks and regards, Joachim -- Joachim Fenkes -- eHCA Linux Driver Developer and Hardware Tamer IBM Deutschland Entwicklung GmbH -- Dept. 3627 (I/O Firmware Dev. 2) Schoenaicher Strasse 220 -- 71032 Boeblingen -- Germany eMail: fenkes@de.ibm.com ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 0/2] IB/ehca: Return physical link information, fix static rate calculation @ 2007-11-02 13:32 ` Joachim Fenkes 0 siblings, 0 replies; 8+ messages in thread From: Joachim Fenkes @ 2007-11-02 13:32 UTC (permalink / raw) To: LinuxPPC-Dev, LKML, OF-General, Roland Dreier, OF-EWG Cc: Hoang-Nam Nguyen, Christoph Raisch, Stefan Roscher This patchset will fix static rate calculation for the new link speeds supported by eHCA2. Also, it enables query_port() to return physical link information instead of constant values, which is needed for the static rate fix. [1/2] makes query_port() return actual physical link info where supported [2/2] fixes static rate calculation based on that info The patches will apply, in order, on top of Roland's for-2.6.24 branch. Please review them and apply for 2.6.24-rc2 if you think they're okay. Thanks and regards, Joachim -- Joachim Fenkes -- eHCA Linux Driver Developer and Hardware Tamer IBM Deutschland Entwicklung GmbH -- Dept. 3627 (I/O Firmware Dev. 2) Schoenaicher Strasse 220 -- 71032 Boeblingen -- Germany eMail: fenkes@de.ibm.com ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] IB/ehca: Return physical link information in query_port() 2007-11-02 13:32 ` Joachim Fenkes @ 2007-11-02 13:33 ` Joachim Fenkes -1 siblings, 0 replies; 8+ messages in thread From: Joachim Fenkes @ 2007-11-02 13:33 UTC (permalink / raw) To: LinuxPPC-Dev, LKML, OF-General, Roland Dreier, OF-EWG Cc: Stefan Roscher, Christoph Raisch Newer firmware versions return physical port information to the partition, so hand that information to the consumer if it's present. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> --- drivers/infiniband/hw/ehca/ehca_hca.c | 20 ++++++++++++++------ drivers/infiniband/hw/ehca/hipz_hw.h | 6 +++++- 2 files changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c index 15806d1..5bd7b59 100644 --- a/drivers/infiniband/hw/ehca/ehca_hca.c +++ b/drivers/infiniband/hw/ehca/ehca_hca.c @@ -151,7 +151,6 @@ int ehca_query_port(struct ib_device *ibdev, } memset(props, 0, sizeof(struct ib_port_attr)); - props->state = rblock->state; switch (rblock->max_mtu) { case 0x1: @@ -188,11 +187,20 @@ int ehca_query_port(struct ib_device *ibdev, props->subnet_timeout = rblock->subnet_timeout; props->init_type_reply = rblock->init_type_reply; - props->active_width = IB_WIDTH_12X; - props->active_speed = 0x1; - - /* at the moment (logical) link state is always LINK_UP */ - props->phys_state = 0x5; + if (rblock->state && rblock->phys_width) { + props->phys_state = rblock->phys_pstate; + props->state = rblock->phys_state; + props->active_width = rblock->phys_width; + props->active_speed = rblock->phys_speed; + } else { + /* old firmware releases don't report physical + * port info, so use default values + */ + props->phys_state = 5; + props->state = rblock->state; + props->active_width = IB_WIDTH_12X; + props->active_speed = 0x1; + } query_port1: ehca_free_fw_ctrlblock(rblock); diff --git a/drivers/infiniband/hw/ehca/hipz_hw.h b/drivers/infiniband/hw/ehca/hipz_hw.h index d9739e5..485b840 100644 --- a/drivers/infiniband/hw/ehca/hipz_hw.h +++ b/drivers/infiniband/hw/ehca/hipz_hw.h @@ -402,7 +402,11 @@ struct hipz_query_port { u64 max_msg_sz; u32 max_mtu; u32 vl_cap; - u8 reserved2[1900]; + u32 phys_pstate; + u32 phys_state; + u32 phys_speed; + u32 phys_width; + u8 reserved2[1884]; u64 guid_entries[255]; } __attribute__ ((packed)); -- 1.5.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 1/2] IB/ehca: Return physical link information in query_port() @ 2007-11-02 13:33 ` Joachim Fenkes 0 siblings, 0 replies; 8+ messages in thread From: Joachim Fenkes @ 2007-11-02 13:33 UTC (permalink / raw) To: LinuxPPC-Dev, LKML, OF-General, Roland Dreier, OF-EWG Cc: Hoang-Nam Nguyen, Christoph Raisch, Stefan Roscher Newer firmware versions return physical port information to the partition, so hand that information to the consumer if it's present. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> --- drivers/infiniband/hw/ehca/ehca_hca.c | 20 ++++++++++++++------ drivers/infiniband/hw/ehca/hipz_hw.h | 6 +++++- 2 files changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c index 15806d1..5bd7b59 100644 --- a/drivers/infiniband/hw/ehca/ehca_hca.c +++ b/drivers/infiniband/hw/ehca/ehca_hca.c @@ -151,7 +151,6 @@ int ehca_query_port(struct ib_device *ibdev, } memset(props, 0, sizeof(struct ib_port_attr)); - props->state = rblock->state; switch (rblock->max_mtu) { case 0x1: @@ -188,11 +187,20 @@ int ehca_query_port(struct ib_device *ibdev, props->subnet_timeout = rblock->subnet_timeout; props->init_type_reply = rblock->init_type_reply; - props->active_width = IB_WIDTH_12X; - props->active_speed = 0x1; - - /* at the moment (logical) link state is always LINK_UP */ - props->phys_state = 0x5; + if (rblock->state && rblock->phys_width) { + props->phys_state = rblock->phys_pstate; + props->state = rblock->phys_state; + props->active_width = rblock->phys_width; + props->active_speed = rblock->phys_speed; + } else { + /* old firmware releases don't report physical + * port info, so use default values + */ + props->phys_state = 5; + props->state = rblock->state; + props->active_width = IB_WIDTH_12X; + props->active_speed = 0x1; + } query_port1: ehca_free_fw_ctrlblock(rblock); diff --git a/drivers/infiniband/hw/ehca/hipz_hw.h b/drivers/infiniband/hw/ehca/hipz_hw.h index d9739e5..485b840 100644 --- a/drivers/infiniband/hw/ehca/hipz_hw.h +++ b/drivers/infiniband/hw/ehca/hipz_hw.h @@ -402,7 +402,11 @@ struct hipz_query_port { u64 max_msg_sz; u32 max_mtu; u32 vl_cap; - u8 reserved2[1900]; + u32 phys_pstate; + u32 phys_state; + u32 phys_speed; + u32 phys_width; + u8 reserved2[1884]; u64 guid_entries[255]; } __attribute__ ((packed)); -- 1.5.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] IB/ehca: Fix static rate calculation 2007-11-02 13:32 ` Joachim Fenkes @ 2007-11-02 13:41 ` Joachim Fenkes -1 siblings, 0 replies; 8+ messages in thread From: Joachim Fenkes @ 2007-11-02 13:41 UTC (permalink / raw) To: LinuxPPC-Dev, LKML, OF-General, Roland Dreier, OF-EWG Cc: Stefan Roscher, Christoph Raisch The IPD formula was a little off and assumed a fixed physical link rate; fix the formula and query the actual physical link rate, now that we can get it. Also, refactor the calculation into a common function ehca_calc_ipd() and use that instead of duplicating code. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> --- drivers/infiniband/hw/ehca/ehca_av.c | 48 +++++++++++++++++++++++----- drivers/infiniband/hw/ehca/ehca_classes.h | 1 - drivers/infiniband/hw/ehca/ehca_iverbs.h | 3 ++ drivers/infiniband/hw/ehca/ehca_main.c | 3 -- drivers/infiniband/hw/ehca/ehca_qp.c | 29 +++++++---------- 5 files changed, 54 insertions(+), 30 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_av.c b/drivers/infiniband/hw/ehca/ehca_av.c index 97d1086..453eb99 100644 --- a/drivers/infiniband/hw/ehca/ehca_av.c +++ b/drivers/infiniband/hw/ehca/ehca_av.c @@ -50,6 +50,38 @@ static struct kmem_cache *av_cache; +int ehca_calc_ipd(struct ehca_shca *shca, int port, + enum ib_rate path_rate, u32 *ipd) +{ + int path = ib_rate_to_mult(path_rate); + int link, ret; + struct ib_port_attr pa; + + if (path_rate == IB_RATE_PORT_CURRENT) { + *ipd = 0; + return 0; + } + + if (unlikely(path < 0)) { + ehca_err(&shca->ib_device, "Invalid static rate! path_rate=%x", + path_rate); + return -EINVAL; + } + + ret = ehca_query_port(&shca->ib_device, port, &pa); + if (unlikely(ret < 0)) { + ehca_err(&shca->ib_device, "Failed to query port ret=%i", ret); + return ret; + } + + link = ib_width_enum_to_int(pa.active_width) * pa.active_speed; + + /* IPD = round((link / path) - 1) */ + *ipd = ((link + (path >> 1)) / path) - 1; + + return 0; +} + struct ib_ah *ehca_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr) { int ret; @@ -69,15 +101,13 @@ struct ib_ah *ehca_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr) av->av.slid_path_bits = ah_attr->src_path_bits; if (ehca_static_rate < 0) { - int ah_mult = ib_rate_to_mult(ah_attr->static_rate); - int ehca_mult = - ib_rate_to_mult(shca->sport[ah_attr->port_num].rate ); - - if (ah_mult >= ehca_mult) - av->av.ipd = 0; - else - av->av.ipd = (ah_mult > 0) ? - ((ehca_mult - 1) / ah_mult) : 0; + u32 ipd; + if (ehca_calc_ipd(shca, ah_attr->port_num, + ah_attr->static_rate, &ipd)) { + ret = -EINVAL; + goto create_ah_exit1; + } + av->av.ipd = ipd; } else av->av.ipd = ehca_static_rate; diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 2d660ae..87f12d4 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -95,7 +95,6 @@ struct ehca_sma_attr { struct ehca_sport { struct ib_cq *ibcq_aqp1; struct ib_qp *ibqp_aqp1; - enum ib_rate rate; enum ib_port_state port_state; struct ehca_sma_attr saved_attr; }; diff --git a/drivers/infiniband/hw/ehca/ehca_iverbs.h b/drivers/infiniband/hw/ehca/ehca_iverbs.h index dce503b..5485799 100644 --- a/drivers/infiniband/hw/ehca/ehca_iverbs.h +++ b/drivers/infiniband/hw/ehca/ehca_iverbs.h @@ -189,6 +189,9 @@ int ehca_mmap(struct ib_ucontext *context, struct vm_area_struct *vma); void ehca_poll_eqs(unsigned long data); +int ehca_calc_ipd(struct ehca_shca *shca, int port, + enum ib_rate path_rate, u32 *ipd); + #ifdef CONFIG_PPC_64K_PAGES void *ehca_alloc_fw_ctrlblock(gfp_t flags); void ehca_free_fw_ctrlblock(void *ptr); diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index c6cd38c..90d4334 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -327,9 +327,6 @@ static int ehca_sense_attributes(struct ehca_shca *shca) shca->hw_level = ehca_hw_level; ehca_gen_dbg(" ... hardware level=%x", shca->hw_level); - shca->sport[0].rate = IB_RATE_30_GBPS; - shca->sport[1].rate = IB_RATE_30_GBPS; - shca->hca_cap = rblock->hca_cap_indicators; ehca_gen_dbg(" ... HCA capabilities:"); for (i = 0; i < ARRAY_SIZE(hca_cap_descr); i++) diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index de18264..2e3e654 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -1196,10 +1196,6 @@ static int internal_modify_qp(struct ib_qp *ibqp, update_mask |= EHCA_BMASK_SET(MQPCB_MASK_QKEY, 1); } if (attr_mask & IB_QP_AV) { - int ah_mult = ib_rate_to_mult(attr->ah_attr.static_rate); - int ehca_mult = ib_rate_to_mult(shca->sport[my_qp-> - init_attr.port_num].rate); - mqpcb->dlid = attr->ah_attr.dlid; update_mask |= EHCA_BMASK_SET(MQPCB_MASK_DLID, 1); mqpcb->source_path_bits = attr->ah_attr.src_path_bits; @@ -1207,11 +1203,12 @@ static int internal_modify_qp(struct ib_qp *ibqp, mqpcb->service_level = attr->ah_attr.sl; update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SERVICE_LEVEL, 1); - if (ah_mult < ehca_mult) - mqpcb->max_static_rate = (ah_mult > 0) ? - ((ehca_mult - 1) / ah_mult) : 0; - else - mqpcb->max_static_rate = 0; + if (ehca_calc_ipd(shca, my_qp->init_attr.port_num, + attr->ah_attr.static_rate, + &mqpcb->max_static_rate)) { + ret = -EINVAL; + goto modify_qp_exit2; + } update_mask |= EHCA_BMASK_SET(MQPCB_MASK_MAX_STATIC_RATE, 1); /* @@ -1280,10 +1277,6 @@ static int internal_modify_qp(struct ib_qp *ibqp, (MQPCB_MASK_RDMA_ATOMIC_OUTST_DEST_QP, 1); } if (attr_mask & IB_QP_ALT_PATH) { - int ah_mult = ib_rate_to_mult(attr->alt_ah_attr.static_rate); - int ehca_mult = ib_rate_to_mult( - shca->sport[my_qp->init_attr.port_num].rate); - if (attr->alt_port_num < 1 || attr->alt_port_num > shca->num_ports) { ret = -EINVAL; @@ -1309,10 +1302,12 @@ static int internal_modify_qp(struct ib_qp *ibqp, mqpcb->source_path_bits_al = attr->alt_ah_attr.src_path_bits; mqpcb->service_level_al = attr->alt_ah_attr.sl; - if (ah_mult > 0 && ah_mult < ehca_mult) - mqpcb->max_static_rate_al = (ehca_mult - 1) / ah_mult; - else - mqpcb->max_static_rate_al = 0; + if (ehca_calc_ipd(shca, my_qp->init_attr.port_num, + attr->alt_ah_attr.static_rate, + &mqpcb->max_static_rate_al)) { + ret = -EINVAL; + goto modify_qp_exit2; + } /* OpenIB doesn't support alternate retry counts - copy them */ mqpcb->retry_count_al = mqpcb->retry_count; -- 1.5.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] IB/ehca: Fix static rate calculation @ 2007-11-02 13:41 ` Joachim Fenkes 0 siblings, 0 replies; 8+ messages in thread From: Joachim Fenkes @ 2007-11-02 13:41 UTC (permalink / raw) To: LinuxPPC-Dev, LKML, OF-General, Roland Dreier, OF-EWG Cc: Hoang-Nam Nguyen, Christoph Raisch, Stefan Roscher The IPD formula was a little off and assumed a fixed physical link rate; fix the formula and query the actual physical link rate, now that we can get it. Also, refactor the calculation into a common function ehca_calc_ipd() and use that instead of duplicating code. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> --- drivers/infiniband/hw/ehca/ehca_av.c | 48 +++++++++++++++++++++++----- drivers/infiniband/hw/ehca/ehca_classes.h | 1 - drivers/infiniband/hw/ehca/ehca_iverbs.h | 3 ++ drivers/infiniband/hw/ehca/ehca_main.c | 3 -- drivers/infiniband/hw/ehca/ehca_qp.c | 29 +++++++---------- 5 files changed, 54 insertions(+), 30 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_av.c b/drivers/infiniband/hw/ehca/ehca_av.c index 97d1086..453eb99 100644 --- a/drivers/infiniband/hw/ehca/ehca_av.c +++ b/drivers/infiniband/hw/ehca/ehca_av.c @@ -50,6 +50,38 @@ static struct kmem_cache *av_cache; +int ehca_calc_ipd(struct ehca_shca *shca, int port, + enum ib_rate path_rate, u32 *ipd) +{ + int path = ib_rate_to_mult(path_rate); + int link, ret; + struct ib_port_attr pa; + + if (path_rate == IB_RATE_PORT_CURRENT) { + *ipd = 0; + return 0; + } + + if (unlikely(path < 0)) { + ehca_err(&shca->ib_device, "Invalid static rate! path_rate=%x", + path_rate); + return -EINVAL; + } + + ret = ehca_query_port(&shca->ib_device, port, &pa); + if (unlikely(ret < 0)) { + ehca_err(&shca->ib_device, "Failed to query port ret=%i", ret); + return ret; + } + + link = ib_width_enum_to_int(pa.active_width) * pa.active_speed; + + /* IPD = round((link / path) - 1) */ + *ipd = ((link + (path >> 1)) / path) - 1; + + return 0; +} + struct ib_ah *ehca_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr) { int ret; @@ -69,15 +101,13 @@ struct ib_ah *ehca_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr) av->av.slid_path_bits = ah_attr->src_path_bits; if (ehca_static_rate < 0) { - int ah_mult = ib_rate_to_mult(ah_attr->static_rate); - int ehca_mult = - ib_rate_to_mult(shca->sport[ah_attr->port_num].rate ); - - if (ah_mult >= ehca_mult) - av->av.ipd = 0; - else - av->av.ipd = (ah_mult > 0) ? - ((ehca_mult - 1) / ah_mult) : 0; + u32 ipd; + if (ehca_calc_ipd(shca, ah_attr->port_num, + ah_attr->static_rate, &ipd)) { + ret = -EINVAL; + goto create_ah_exit1; + } + av->av.ipd = ipd; } else av->av.ipd = ehca_static_rate; diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 2d660ae..87f12d4 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -95,7 +95,6 @@ struct ehca_sma_attr { struct ehca_sport { struct ib_cq *ibcq_aqp1; struct ib_qp *ibqp_aqp1; - enum ib_rate rate; enum ib_port_state port_state; struct ehca_sma_attr saved_attr; }; diff --git a/drivers/infiniband/hw/ehca/ehca_iverbs.h b/drivers/infiniband/hw/ehca/ehca_iverbs.h index dce503b..5485799 100644 --- a/drivers/infiniband/hw/ehca/ehca_iverbs.h +++ b/drivers/infiniband/hw/ehca/ehca_iverbs.h @@ -189,6 +189,9 @@ int ehca_mmap(struct ib_ucontext *context, struct vm_area_struct *vma); void ehca_poll_eqs(unsigned long data); +int ehca_calc_ipd(struct ehca_shca *shca, int port, + enum ib_rate path_rate, u32 *ipd); + #ifdef CONFIG_PPC_64K_PAGES void *ehca_alloc_fw_ctrlblock(gfp_t flags); void ehca_free_fw_ctrlblock(void *ptr); diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index c6cd38c..90d4334 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -327,9 +327,6 @@ static int ehca_sense_attributes(struct ehca_shca *shca) shca->hw_level = ehca_hw_level; ehca_gen_dbg(" ... hardware level=%x", shca->hw_level); - shca->sport[0].rate = IB_RATE_30_GBPS; - shca->sport[1].rate = IB_RATE_30_GBPS; - shca->hca_cap = rblock->hca_cap_indicators; ehca_gen_dbg(" ... HCA capabilities:"); for (i = 0; i < ARRAY_SIZE(hca_cap_descr); i++) diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index de18264..2e3e654 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -1196,10 +1196,6 @@ static int internal_modify_qp(struct ib_qp *ibqp, update_mask |= EHCA_BMASK_SET(MQPCB_MASK_QKEY, 1); } if (attr_mask & IB_QP_AV) { - int ah_mult = ib_rate_to_mult(attr->ah_attr.static_rate); - int ehca_mult = ib_rate_to_mult(shca->sport[my_qp-> - init_attr.port_num].rate); - mqpcb->dlid = attr->ah_attr.dlid; update_mask |= EHCA_BMASK_SET(MQPCB_MASK_DLID, 1); mqpcb->source_path_bits = attr->ah_attr.src_path_bits; @@ -1207,11 +1203,12 @@ static int internal_modify_qp(struct ib_qp *ibqp, mqpcb->service_level = attr->ah_attr.sl; update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SERVICE_LEVEL, 1); - if (ah_mult < ehca_mult) - mqpcb->max_static_rate = (ah_mult > 0) ? - ((ehca_mult - 1) / ah_mult) : 0; - else - mqpcb->max_static_rate = 0; + if (ehca_calc_ipd(shca, my_qp->init_attr.port_num, + attr->ah_attr.static_rate, + &mqpcb->max_static_rate)) { + ret = -EINVAL; + goto modify_qp_exit2; + } update_mask |= EHCA_BMASK_SET(MQPCB_MASK_MAX_STATIC_RATE, 1); /* @@ -1280,10 +1277,6 @@ static int internal_modify_qp(struct ib_qp *ibqp, (MQPCB_MASK_RDMA_ATOMIC_OUTST_DEST_QP, 1); } if (attr_mask & IB_QP_ALT_PATH) { - int ah_mult = ib_rate_to_mult(attr->alt_ah_attr.static_rate); - int ehca_mult = ib_rate_to_mult( - shca->sport[my_qp->init_attr.port_num].rate); - if (attr->alt_port_num < 1 || attr->alt_port_num > shca->num_ports) { ret = -EINVAL; @@ -1309,10 +1302,12 @@ static int internal_modify_qp(struct ib_qp *ibqp, mqpcb->source_path_bits_al = attr->alt_ah_attr.src_path_bits; mqpcb->service_level_al = attr->alt_ah_attr.sl; - if (ah_mult > 0 && ah_mult < ehca_mult) - mqpcb->max_static_rate_al = (ehca_mult - 1) / ah_mult; - else - mqpcb->max_static_rate_al = 0; + if (ehca_calc_ipd(shca, my_qp->init_attr.port_num, + attr->alt_ah_attr.static_rate, + &mqpcb->max_static_rate_al)) { + ret = -EINVAL; + goto modify_qp_exit2; + } /* OpenIB doesn't support alternate retry counts - copy them */ mqpcb->retry_count_al = mqpcb->retry_count; -- 1.5.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] IB/ehca: Fix static rate calculation 2007-11-02 13:41 ` Joachim Fenkes @ 2007-11-07 19:45 ` Roland Dreier -1 siblings, 0 replies; 8+ messages in thread From: Roland Dreier @ 2007-11-07 19:45 UTC (permalink / raw) To: Joachim Fenkes Cc: LKML, OF-EWG, LinuxPPC-Dev, Christoph Raisch, OF-General, Stefan Roscher thanks, applied both patches. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] IB/ehca: Fix static rate calculation @ 2007-11-07 19:45 ` Roland Dreier 0 siblings, 0 replies; 8+ messages in thread From: Roland Dreier @ 2007-11-07 19:45 UTC (permalink / raw) To: Joachim Fenkes Cc: LinuxPPC-Dev, LKML, OF-General, Roland Dreier, OF-EWG, Hoang-Nam Nguyen, Christoph Raisch, Stefan Roscher thanks, applied both patches. ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-11-07 19:46 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2007-11-02 13:32 [PATCH 0/2] IB/ehca: Return physical link information, fix static rate calculation Joachim Fenkes 2007-11-02 13:32 ` Joachim Fenkes 2007-11-02 13:33 ` [PATCH 1/2] IB/ehca: Return physical link information in query_port() Joachim Fenkes 2007-11-02 13:33 ` Joachim Fenkes 2007-11-02 13:41 ` [PATCH 2/2] IB/ehca: Fix static rate calculation Joachim Fenkes 2007-11-02 13:41 ` Joachim Fenkes 2007-11-07 19:45 ` Roland Dreier 2007-11-07 19:45 ` Roland Dreier
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.