Re: [PATCH 5/5] ufs/phy: qcom: Refactor to use phy_init call

[Subhash Jadavani <subhashj-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]

Hi Vivek,

Please find one comment inline below, rest look good.

Regards,
Subhash

On 2017-08-03 23:48, Vivek Gautam wrote:
> Refactor ufs_qcom_power_up_sequence() to get rid of ugly
> exported phy APIs and use the phy_init() and phy_power_on()
> to do the phy initialization.
> 
> Signed-off-by: Vivek Gautam <vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-ufs-i.h        |  2 --
>  drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c |  9 +++++--
>  drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c |  9 +++++--
>  drivers/phy/qualcomm/phy-qcom-ufs.c          | 38 
> ++++++++--------------------
>  drivers/scsi/ufs/ufs-qcom.c                  | 36 
> ++++++++++----------------
>  include/linux/phy/phy-qcom-ufs.h             |  3 ---
>  6 files changed, 38 insertions(+), 59 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> index 94326ed107c3..495fd5941231 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> +++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
> @@ -123,7 +123,6 @@ struct ufs_qcom_phy {
>   * struct ufs_qcom_phy_specific_ops - set of pointers to functions 
> which have a
>   * specific implementation per phy. Each UFS phy, should implement
>   * those functions according to its spec and requirements
> - * @calibrate_phy: pointer to a function that calibrate the phy
>   * @start_serdes: pointer to a function that starts the serdes
>   * @is_physical_coding_sublayer_ready: pointer to a function that
>   * checks pcs readiness. returns 0 for success and non-zero for error.
> @@ -132,7 +131,6 @@ struct ufs_qcom_phy {
>   * and writes to QSERDES_RX_SIGDET_CNTRL attribute
>   */
>  struct ufs_qcom_phy_specific_ops {
> -	int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
>  	void (*start_serdes)(struct ufs_qcom_phy *phy);
>  	int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
>  	void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
> b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
> index af65785230b5..c39440b56b6d 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
> +++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
> @@ -44,7 +44,13 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct
> ufs_qcom_phy *phy_common)
> 
>  static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
>  {
> -	return 0;
> +	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
> +	bool is_rate_B = false;
> +
> +	if (phy_common->mode == PHY_MODE_UFS_HS_B)
> +		is_rate_B = true;
> +
> +	return ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B);
>  }
> 
>  static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
> @@ -120,7 +126,6 @@ static int
> ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
>  };
> 
>  static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
> -	.calibrate_phy		= ufs_qcom_phy_qmp_14nm_phy_calibrate,
>  	.start_serdes		= ufs_qcom_phy_qmp_14nm_start_serdes,
>  	.is_physical_coding_sublayer_ready = 
> ufs_qcom_phy_qmp_14nm_is_pcs_ready,
>  	.set_tx_lane_enable	= ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
> b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
> index 5c18c41dbdb4..5705a2d4c6d2 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
> +++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
> @@ -63,7 +63,13 @@ void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct
> ufs_qcom_phy *phy_common)
> 
>  static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
>  {
> -	return 0;
> +	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
> +	bool is_rate_B = false;
> +
> +	if (phy_common->mode == PHY_MODE_UFS_HS_B)
> +		is_rate_B = true;
> +
> +	return ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B);
>  }
> 
>  static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
> @@ -178,7 +184,6 @@ static int
> ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
>  };
> 
>  static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
> -	.calibrate_phy		= ufs_qcom_phy_qmp_20nm_phy_calibrate,
>  	.start_serdes		= ufs_qcom_phy_qmp_20nm_start_serdes,
>  	.is_physical_coding_sublayer_ready = 
> ufs_qcom_phy_qmp_20nm_is_pcs_ready,
>  	.set_tx_lane_enable	= ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c
> b/drivers/phy/qualcomm/phy-qcom-ufs.c
> index 43865ef340e2..1febe3294fe3 100644
> --- a/drivers/phy/qualcomm/phy-qcom-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-ufs.c
> @@ -518,9 +518,8 @@ void ufs_qcom_phy_disable_iface_clk(struct
> ufs_qcom_phy *phy)
>  	}
>  }
> 
> -int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
> +static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy 
> *ufs_qcom_phy)
>  {
> -	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
>  	int ret = 0;
> 
>  	if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
> @@ -533,7 +532,6 @@ int ufs_qcom_phy_start_serdes(struct phy 
> *generic_phy)
> 
>  	return ret;
>  }
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
> 
>  int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 
> tx_lanes)
>  {
> @@ -564,31 +562,8 @@ void ufs_qcom_phy_save_controller_version(struct
> phy *generic_phy,
>  }
>  EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
> 
> -int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool 
> is_rate_B)
> -{
> -	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> -	int ret = 0;
> -
> -	if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
> -		dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not 
> supported\n",
> -			__func__);
> -		ret = -ENOTSUPP;
> -	} else {
> -		ret = ufs_qcom_phy->phy_spec_ops->
> -				calibrate_phy(ufs_qcom_phy, is_rate_B);
> -		if (ret)
> -			dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n",
> -				__func__, ret);
> -	}
> -
> -	return ret;
> -}
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
> -
> -int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
> +static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy 
> *ufs_qcom_phy)
>  {
> -	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> -
>  	if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
>  		dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready()
> callback is not supported\n",
>  			__func__);
> @@ -598,7 +573,6 @@ int ufs_qcom_phy_is_pcs_ready(struct phy 
> *generic_phy)
>  	return ufs_qcom_phy->phy_spec_ops->
>  			is_physical_coding_sublayer_ready(ufs_qcom_phy);
>  }
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
> 
>  int ufs_qcom_phy_power_on(struct phy *generic_phy)
>  {
> @@ -609,6 +583,14 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
>  	if (phy_common->is_powered_on)
>  		return 0;
> 
> +	err = ufs_qcom_phy_start_serdes(phy_common);
> +	if (err)
> +		return err;
> +
> +	err = ufs_qcom_phy_is_pcs_ready(phy_common);
> +	if (err)
> +		return err;
> +

Now that we are doing serdes start (and checking the PCS ready), I am 
not sure we can call phy_power_on() from ufs_qcom_resume(). Please 
check.


>  	err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
>  	if (err) {
>  		dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 44c21d5818ee..890eafeb8ad4 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -281,10 +281,10 @@ static int ufs_qcom_power_up_sequence(struct 
> ufs_hba *hba)
>  	/* provide 1ms delay to let the reset pulse propagate */
>  	usleep_range(1000, 1100);
> 
> -	ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
> -
> +	/* phy initialization - calibrate the phy */
> +	ret = phy_init(phy);
>  	if (ret) {
> -		dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = 
> %d\n",
> +		dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
>  			__func__, ret);
>  		goto out;
>  	}
> @@ -297,21 +297,22 @@ static int ufs_qcom_power_up_sequence(struct 
> ufs_hba *hba)
>  	 * voltage, current to settle down before starting serdes.
>  	 */
>  	usleep_range(1000, 1100);
> -	ret = ufs_qcom_phy_start_serdes(phy);
> +
> +	/* power on phy - start serdes and phy's power and clocks */
> +	ret = phy_power_on(phy);
>  	if (ret) {
> -		dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret = 
> %d\n",
> +		dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
>  			__func__, ret);
> -		goto out;
> +		goto out_disable_phy;
>  	}
> 
> -	ret = ufs_qcom_phy_is_pcs_ready(phy);
> -	if (ret)
> -		dev_err(hba->dev,
> -			"%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
> -			__func__, ret);
> -
>  	ufs_qcom_select_unipro_mode(host);
> 
> +	return 0;
> +
> +out_disable_phy:
> +	ufs_qcom_assert_reset(hba);
> +	phy_exit(phy);
>  out:
>  	return ret;
>  }
> @@ -1276,14 +1277,9 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>  	ufs_qcom_phy_save_controller_version(host->generic_phy,
>  		host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
> 
> -	phy_init(host->generic_phy);
> -	err = phy_power_on(host->generic_phy);
> -	if (err)
> -		goto out_unregister_bus;
> -
>  	err = ufs_qcom_init_lane_clks(host);
>  	if (err)
> -		goto out_disable_phy;
> +		goto out_variant_clear;
> 
>  	ufs_qcom_set_caps(hba);
>  	ufs_qcom_advertise_quirks(hba);
> @@ -1304,10 +1300,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
> 
>  	goto out;
> 
> -out_disable_phy:
> -	phy_power_off(host->generic_phy);
> -out_unregister_bus:
> -	phy_exit(host->generic_phy);
>  out_variant_clear:
>  	ufshcd_set_variant(hba, NULL);
>  out:
> diff --git a/include/linux/phy/phy-qcom-ufs.h 
> b/include/linux/phy/phy-qcom-ufs.h
> index 35c070ea6ea3..0a2c18a9771d 100644
> --- a/include/linux/phy/phy-qcom-ufs.h
> +++ b/include/linux/phy/phy-qcom-ufs.h
> @@ -31,10 +31,7 @@
>   */
>  void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
> 
> -int ufs_qcom_phy_start_serdes(struct phy *phy);
>  int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
> -int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B);
> -int ufs_qcom_phy_is_pcs_ready(struct phy *phy);
>  void ufs_qcom_phy_save_controller_version(struct phy *phy,
>  			u8 major, u16 minor, u16 step);

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html