All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: LKML <linux-kernel@vger.kernel.org>, Andi Kleen <ak@suse.de>,
	Glauber de Oliveira Costa <glommer@gmail.com>,
	Jan Beulich <jbeulich@novell.com>
Subject: [PATCH 04 of 10] x86: unify pgtable accessors which use supported_pte_mask
Date: Tue, 08 Jan 2008 14:00:07 -0800	[thread overview]
Message-ID: <aecbf28ecb53fb7b2830.1199829607@localhost> (raw)
In-Reply-To: <patchbomb.1199829603@localhost>

Make users of supported_pte_mask common.  This has the side-effect of
introducing the variable for 32-bit non-PAE, but I think its a pretty
small cost to simplify the code.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>

---
 arch/x86/mm/init_32.c            |    5 +++--
 include/asm-x86/pgtable-2level.h |    2 --
 include/asm-x86/pgtable-3level.h |   14 --------------
 include/asm-x86/pgtable.h        |   32 ++++++++++++++++++++++++++++++++
 include/asm-x86/pgtable_32.h     |   16 ----------------
 include/asm-x86/pgtable_64.h     |   18 ------------------
 6 files changed, 35 insertions(+), 52 deletions(-)

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -473,11 +473,12 @@ void zap_low_mappings (void)
 
 int nx_enabled = 0;
 
+pteval_t __supported_pte_mask __read_mostly = ~_PAGE_NX;
+EXPORT_SYMBOL_GPL(__supported_pte_mask);
+
 #ifdef CONFIG_X86_PAE
 
 static int disable_nx __initdata = 0;
-u64 __supported_pte_mask __read_mostly = ~_PAGE_NX;
-EXPORT_SYMBOL_GPL(__supported_pte_mask);
 
 /*
  * noexec = on|off
diff --git a/include/asm-x86/pgtable-2level.h b/include/asm-x86/pgtable-2level.h
--- a/include/asm-x86/pgtable-2level.h
+++ b/include/asm-x86/pgtable-2level.h
@@ -53,8 +53,6 @@ static inline pte_t native_ptep_get_and_
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
 #define pte_none(x)		(!(x).pte_low)
 #define pte_pfn(x)		(pte_val(x) >> PAGE_SHIFT)
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
 
 /*
  * All present pages are kernel-executable:
diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
--- a/include/asm-x86/pgtable-3level.h
+++ b/include/asm-x86/pgtable-3level.h
@@ -158,20 +158,6 @@ static inline unsigned long pte_pfn(pte_
 	return pte_val(pte) >> PAGE_SHIFT;
 }
 
-extern unsigned long long __supported_pte_mask;
-
-static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
-{
-	return __pte((((unsigned long long)page_nr << PAGE_SHIFT) |
-		      pgprot_val(pgprot)) & __supported_pte_mask);
-}
-
-static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
-{
-	return __pmd((((unsigned long long)page_nr << PAGE_SHIFT) |
-		      pgprot_val(pgprot)) & __supported_pte_mask);
-}
-
 /*
  * Bits 0, 6 and 7 are taken in the low part of the pte,
  * put the 32 bits of offset into the high part.
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -135,6 +135,38 @@ static inline pte_t pte_mkhuge(pte_t pte
 static inline pte_t pte_mkhuge(pte_t pte)	{ return __pte(pte_val(pte) | _PAGE_PSE); }
 static inline pte_t pte_clrhuge(pte_t pte)	{ return __pte(pte_val(pte) & ~_PAGE_PSE); }
 
+extern pteval_t __supported_pte_mask;
+
+static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
+{
+	return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) |
+		      pgprot_val(pgprot)) & __supported_pte_mask);
+}
+
+static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
+{
+	return __pmd((((phys_addr_t)page_nr << PAGE_SHIFT) |
+		      pgprot_val(pgprot)) & __supported_pte_mask);
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pteval_t val = pte_val(pte);
+
+	val &= _PAGE_CHG_MASK;
+	val |= pgprot_val(newprot);
+
+	/*
+	 * Chop off the NX bit (if present), and add the NX portion of
+	 * the newprot (if present):
+	 */
+	val &= ~_PAGE_NX;
+	val |= pgprot_val(newprot) & __supported_pte_mask;
+
+	return __pte(val);
+}
+
+
 #endif	/* __ASSEMBLER__ */
 
 #ifdef CONFIG_X86_32
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -235,22 +235,6 @@ static inline void clone_pgd_range(pgd_t
 
 #define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
 
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte.pte_low &= _PAGE_CHG_MASK;
-	pte.pte_low |= pgprot_val(newprot);
-#ifdef CONFIG_X86_PAE
-	/*
-	 * Chop off the NX bit (if present), and add the NX portion of
-	 * the newprot (if present):
-	 */
-	pte.pte_high &= ~(1 << (_PAGE_BIT_NX - 32));
-	pte.pte_high |= (pgprot_val(newprot) >> 32) & \
-					(__supported_pte_mask >> 32);
-#endif
-	return pte;
-}
-
 /*
  * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
  *
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -17,7 +17,6 @@ extern pud_t level3_ident_pgt[512];
 extern pud_t level3_ident_pgt[512];
 extern pmd_t level2_kernel_pgt[512];
 extern pgd_t init_level4_pgt[];
-extern unsigned long __supported_pte_mask;
 
 #define swapper_pg_dir init_level4_pgt
 
@@ -165,14 +164,6 @@ static inline unsigned long pmd_bad(pmd_
 #define pte_page(x)	pfn_to_page(pte_pfn(x))
 #define pte_pfn(x)  ((pte_val(x) & __PHYSICAL_MASK) >> PAGE_SHIFT)
 
-static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
-{
-	pte_t pte;
-	pte_val(pte) = (page_nr << PAGE_SHIFT);
-	pte_val(pte) |= pgprot_val(pgprot);
-	pte_val(pte) &= __supported_pte_mask;
-	return pte;
-}
 struct vm_area_struct;
 
 static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
@@ -239,15 +230,6 @@ static inline void ptep_set_wrprotect(st
 /* page, protection -> pte */
 #define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
  
-/* Change flags of a PTE */
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{ 
-	pte_val(pte) &= _PAGE_CHG_MASK;
-	pte_val(pte) |= pgprot_val(newprot);
-	pte_val(pte) &= __supported_pte_mask;
-       return pte; 
-}
-
 #define pte_index(address) \
 		(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 #define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \



  parent reply	other threads:[~2008-01-08 22:15 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-08 22:00 [PATCH 00 of 10] x86: unify asm/pgtable.h Jeremy Fitzhardinge
2008-01-08 22:00 ` [PATCH 01 of 10] x86: move all asm/pgtable constants into one place Jeremy Fitzhardinge
2008-01-08 22:00 ` [PATCH 02 of 10] x86: avoid name conflict for Voyager leave_mm Jeremy Fitzhardinge
2008-01-08 22:00 ` [PATCH 03 of 10] x86/pgtable: unify pagetable accessors Jeremy Fitzhardinge
2008-01-08 22:00 ` Jeremy Fitzhardinge [this message]
2008-01-08 22:00 ` [PATCH 05 of 10] x86: page.h: make pte_t a union to always include pte element Jeremy Fitzhardinge
2008-01-08 22:00 ` [PATCH 06 of 10] x86/vmi: fix compilation as a result of pte_t changes Jeremy Fitzhardinge
2008-01-08 22:00 ` [PATCH 07 of 10] x86: pgtable: unify pte accessors Jeremy Fitzhardinge
2008-01-08 22:00 ` [PATCH 08 of 10] x86: unify zero_page definition Jeremy Fitzhardinge
2008-01-08 22:00 ` [PATCH 09 of 10] x86: unify paravirt pagetable accessors Jeremy Fitzhardinge
2008-01-08 22:00 ` [PATCH 10 of 10] xen: mask out PWT too Jeremy Fitzhardinge
2008-01-09  9:17   ` Jan Beulich
2008-01-09 19:04     ` Jeremy Fitzhardinge
2008-01-08 22:42 ` [PATCH 00 of 10] x86: unify asm/pgtable.h Ingo Molnar
2008-01-08 23:12   ` Ingo Molnar
2008-01-08 23:23     ` Jeremy Fitzhardinge
2008-01-08 23:28       ` Ingo Molnar
2008-01-08 23:44         ` Ingo Molnar
2008-01-08 23:51           ` Ingo Molnar
2008-01-09  0:01           ` Ingo Molnar
2008-01-09  0:13             ` Jeremy Fitzhardinge
2008-01-09  0:20               ` Ingo Molnar
2008-01-09  0:28                 ` Ingo Molnar
2008-01-09  0:30                   ` Ingo Molnar
2008-01-09  0:43                     ` Ingo Molnar
2008-01-09  0:55                       ` Jeremy Fitzhardinge
2008-01-09  1:09                       ` Jeremy Fitzhardinge
2008-01-09  1:16                         ` Ingo Molnar
2008-01-09  1:18                           ` Andi Kleen
2008-01-09  1:22                             ` Ingo Molnar
2008-01-09  1:37                               ` Andi Kleen
2008-01-09  1:21                           ` Jeremy Fitzhardinge
2008-01-09  1:37                             ` Ingo Molnar
2008-01-09  0:53                     ` Jeremy Fitzhardinge
2008-01-09  0:59                       ` Ingo Molnar
2008-01-09  1:07                         ` Jeremy Fitzhardinge
2008-01-09  1:12                           ` Andi Kleen
2008-01-09  1:20                             ` Ingo Molnar
2008-01-09  1:35                             ` Jeremy Fitzhardinge
2008-01-09  1:42                               ` Andi Kleen
2008-01-09  1:56                                 ` Jeremy Fitzhardinge
2008-01-09  2:11                                   ` Andi Kleen
2008-01-09  3:22                                     ` Jeremy Fitzhardinge
2008-01-09 10:48                                       ` Ingo Molnar
2008-01-09 10:47                                     ` Ingo Molnar
2008-01-09 14:26                                       ` Andi Kleen
2008-01-09  9:37                               ` Jan Beulich
2008-01-09  1:11                       ` Andi Kleen
2008-01-09  0:07         ` Jeremy Fitzhardinge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aecbf28ecb53fb7b2830.1199829607@localhost \
    --to=jeremy@goop.org \
    --cc=ak@suse.de \
    --cc=glommer@gmail.com \
    --cc=jbeulich@novell.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.