From: Brian Masney <bmasney@redhat.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: linux-clk@vger.kernel.org,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
"moderated list:ARM/Rockchip SoC support"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Rockchip SoC support"
<linux-rockchip@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] clk: rockchip: Use flexible array for clock table
Date: Mon, 11 May 2026 12:06:34 -0400 [thread overview]
Message-ID: <agH-ivEdw12_3OJz@redhat.com> (raw)
In-Reply-To: <20260511032252.361906-1-rosenp@gmail.com>
Hi Rosen,
On Sun, May 10, 2026 at 08:22:52PM -0700, Rosen Penev wrote:
> Store the clock lookup table in the Rockchip clock provider
> allocation instead of allocating it separately.
>
> This ties the table lifetime directly to the provider and removes a
> separate allocation failure path while preserving the clk_onecell_data
> lookup interface.
>
> Assisted-by: Codex:GPT-5.5
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
> drivers/clk/rockchip/clk.c | 17 ++++-------------
> drivers/clk/rockchip/clk.h | 2 ++
> 2 files changed, 6 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c
> index ee8c79b938d3..dbb4b6f33abb 100644
> --- a/drivers/clk/rockchip/clk.c
> +++ b/drivers/clk/rockchip/clk.c
> @@ -359,26 +359,21 @@ static struct rockchip_clk_provider *rockchip_clk_init_base(
> unsigned long nr_clks, bool has_late_clocks)
> {
> struct rockchip_clk_provider *ctx;
> - struct clk **clk_table;
> struct clk *default_clk_val;
> int i;
>
> default_clk_val = ERR_PTR(has_late_clocks ? -EPROBE_DEFER : -ENOENT);
>
> - ctx = kzalloc_obj(struct rockchip_clk_provider);
> + ctx = kzalloc_flex(*ctx, clk_table, nr_clks);
> if (!ctx)
> return ERR_PTR(-ENOMEM);
>
> - clk_table = kzalloc_objs(struct clk *, nr_clks);
> - if (!clk_table)
> - goto err_free;
> -
> for (i = 0; i < nr_clks; ++i)
> - clk_table[i] = default_clk_val;
> + ctx->clk_table[i] = default_clk_val;
>
> - ctx->reg_base = base;
> - ctx->clk_data.clks = clk_table;
> ctx->clk_data.clk_num = nr_clks;
> + ctx->clk_data.clks = ctx->clk_table;
Where's the __counted_by? Also struct clk_onecell_data is embedded
inside struct rockchip_clk_provider, and I'm not sure offhand how
that'll work.
Brian
> + ctx->reg_base = base;
> ctx->cru_node = np;
> spin_lock_init(&ctx->lock);
>
> @@ -388,10 +383,6 @@ static struct rockchip_clk_provider *rockchip_clk_init_base(
> "rockchip,grf");
>
> return ctx;
> -
> -err_free:
> - kfree(ctx);
> - return ERR_PTR(-ENOMEM);
> }
>
> struct rockchip_clk_provider *rockchip_clk_init(struct device_node *np,
> diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
> index 9e3503e2ffc2..d4033bf750f5 100644
> --- a/drivers/clk/rockchip/clk.h
> +++ b/drivers/clk/rockchip/clk.h
> @@ -604,6 +604,7 @@ struct rockchip_aux_grf {
> * @grf: regmap of the general-register-files syscon
> * @aux_grf_table: hashtable of auxiliary GRF regmaps, indexed by grf_type
> * @lock: maintains exclusion between callbacks for a given clock-provider.
> + * @clk_table: clock lookup table.
> */
> struct rockchip_clk_provider {
> void __iomem *reg_base;
> @@ -612,6 +613,7 @@ struct rockchip_clk_provider {
> struct regmap *grf;
> DECLARE_HASHTABLE(aux_grf_table, GRF_HASH_ORDER);
> spinlock_t lock;
> + struct clk *clk_table[];
> };
>
> struct rockchip_pll_rate_table {
> --
> 2.54.0
>
WARNING: multiple messages have this Message-ID (diff)
From: Brian Masney <bmasney@redhat.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: linux-clk@vger.kernel.org,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
"moderated list:ARM/Rockchip SoC support"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Rockchip SoC support"
<linux-rockchip@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] clk: rockchip: Use flexible array for clock table
Date: Mon, 11 May 2026 12:06:34 -0400 [thread overview]
Message-ID: <agH-ivEdw12_3OJz@redhat.com> (raw)
In-Reply-To: <20260511032252.361906-1-rosenp@gmail.com>
Hi Rosen,
On Sun, May 10, 2026 at 08:22:52PM -0700, Rosen Penev wrote:
> Store the clock lookup table in the Rockchip clock provider
> allocation instead of allocating it separately.
>
> This ties the table lifetime directly to the provider and removes a
> separate allocation failure path while preserving the clk_onecell_data
> lookup interface.
>
> Assisted-by: Codex:GPT-5.5
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
> drivers/clk/rockchip/clk.c | 17 ++++-------------
> drivers/clk/rockchip/clk.h | 2 ++
> 2 files changed, 6 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c
> index ee8c79b938d3..dbb4b6f33abb 100644
> --- a/drivers/clk/rockchip/clk.c
> +++ b/drivers/clk/rockchip/clk.c
> @@ -359,26 +359,21 @@ static struct rockchip_clk_provider *rockchip_clk_init_base(
> unsigned long nr_clks, bool has_late_clocks)
> {
> struct rockchip_clk_provider *ctx;
> - struct clk **clk_table;
> struct clk *default_clk_val;
> int i;
>
> default_clk_val = ERR_PTR(has_late_clocks ? -EPROBE_DEFER : -ENOENT);
>
> - ctx = kzalloc_obj(struct rockchip_clk_provider);
> + ctx = kzalloc_flex(*ctx, clk_table, nr_clks);
> if (!ctx)
> return ERR_PTR(-ENOMEM);
>
> - clk_table = kzalloc_objs(struct clk *, nr_clks);
> - if (!clk_table)
> - goto err_free;
> -
> for (i = 0; i < nr_clks; ++i)
> - clk_table[i] = default_clk_val;
> + ctx->clk_table[i] = default_clk_val;
>
> - ctx->reg_base = base;
> - ctx->clk_data.clks = clk_table;
> ctx->clk_data.clk_num = nr_clks;
> + ctx->clk_data.clks = ctx->clk_table;
Where's the __counted_by? Also struct clk_onecell_data is embedded
inside struct rockchip_clk_provider, and I'm not sure offhand how
that'll work.
Brian
> + ctx->reg_base = base;
> ctx->cru_node = np;
> spin_lock_init(&ctx->lock);
>
> @@ -388,10 +383,6 @@ static struct rockchip_clk_provider *rockchip_clk_init_base(
> "rockchip,grf");
>
> return ctx;
> -
> -err_free:
> - kfree(ctx);
> - return ERR_PTR(-ENOMEM);
> }
>
> struct rockchip_clk_provider *rockchip_clk_init(struct device_node *np,
> diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
> index 9e3503e2ffc2..d4033bf750f5 100644
> --- a/drivers/clk/rockchip/clk.h
> +++ b/drivers/clk/rockchip/clk.h
> @@ -604,6 +604,7 @@ struct rockchip_aux_grf {
> * @grf: regmap of the general-register-files syscon
> * @aux_grf_table: hashtable of auxiliary GRF regmaps, indexed by grf_type
> * @lock: maintains exclusion between callbacks for a given clock-provider.
> + * @clk_table: clock lookup table.
> */
> struct rockchip_clk_provider {
> void __iomem *reg_base;
> @@ -612,6 +613,7 @@ struct rockchip_clk_provider {
> struct regmap *grf;
> DECLARE_HASHTABLE(aux_grf_table, GRF_HASH_ORDER);
> spinlock_t lock;
> + struct clk *clk_table[];
> };
>
> struct rockchip_pll_rate_table {
> --
> 2.54.0
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2026-05-11 16:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-11 3:22 [PATCH] clk: rockchip: Use flexible array for clock table Rosen Penev
2026-05-11 3:22 ` Rosen Penev
2026-05-11 16:06 ` Brian Masney [this message]
2026-05-11 16:06 ` Brian Masney
2026-05-11 19:08 ` Rosen Penev
2026-05-11 19:08 ` Rosen Penev
2026-05-11 20:41 ` Brian Masney
2026-05-11 20:41 ` Brian Masney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=agH-ivEdw12_3OJz@redhat.com \
--to=bmasney@redhat.com \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=rosenp@gmail.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.