[Intel-wired-lan] [PATCH v5 net 0/7] i40e: re-init and UAF fixes

[Intel-wired-lan] [PATCH v5 net 0/7] i40e: re-init and UAF fixes

[Maciej Fijalkowski]

v5:
- include three new patches to address last Sashiko review
  *
- do not release the irq lump in rebuild path in patch 7
- clear dangling pointers from rx and xdp rings arrays
v4:
- add preceding patch that fixes a case when some of re-init allocations
  failed and we missed de-registering netdev at failure path
- pull out i40e_vsi_setup() changes onto separate patch
v3:
- address UAF when ring arrays were freed before q_vector's ring
  containers (Sashiko, Jacob)
- remove bool params from alloc/free array routines (Simon)
v2:
- NULL vsi->tx_rings in i40e_vsi_alloc_arrays() (Sashiko)


Maciej Fijalkowski (7):
  i40e: unregister netdev before clearing VSI on reinit failure
  i40e: avoid null ptr dereference in i40e_ptp_stop()
  i40e: make ring pointers unreachable before freeing via rcu
  i40e: avoid deadlock when calling unregister_netdev()
  i40e: fix potential UAF in i40e_vsi_setup()'s error path
  i40e: do not expose netdev too early
  i40e: keep q_vectors array in sync with channel count changes

 drivers/net/ethernet/intel/i40e/i40e_main.c | 128 ++++++++++++--------
 drivers/net/ethernet/intel/i40e/i40e_ptp.c  |   5 +-
 2 files changed, 82 insertions(+), 51 deletions(-)

-- 
2.43.0

[PATCH v5 net 0/7] i40e: re-init and UAF fixes

[Maciej Fijalkowski]

v5:
- include three new patches to address last Sashiko review
  *
- do not release the irq lump in rebuild path in patch 7
- clear dangling pointers from rx and xdp rings arrays
v4:
- add preceding patch that fixes a case when some of re-init allocations
  failed and we missed de-registering netdev at failure path
- pull out i40e_vsi_setup() changes onto separate patch
v3:
- address UAF when ring arrays were freed before q_vector's ring
  containers (Sashiko, Jacob)
- remove bool params from alloc/free array routines (Simon)
v2:
- NULL vsi->tx_rings in i40e_vsi_alloc_arrays() (Sashiko)


Maciej Fijalkowski (7):
  i40e: unregister netdev before clearing VSI on reinit failure
  i40e: avoid null ptr dereference in i40e_ptp_stop()
  i40e: make ring pointers unreachable before freeing via rcu
  i40e: avoid deadlock when calling unregister_netdev()
  i40e: fix potential UAF in i40e_vsi_setup()'s error path
  i40e: do not expose netdev too early
  i40e: keep q_vectors array in sync with channel count changes

 drivers/net/ethernet/intel/i40e/i40e_main.c | 128 ++++++++++++--------
 drivers/net/ethernet/intel/i40e/i40e_ptp.c  |   5 +-
 2 files changed, 82 insertions(+), 51 deletions(-)

-- 
2.43.0

[Intel-wired-lan] [PATCH v5 net 1/7] i40e: unregister netdev before clearing VSI on reinit failure

[Maciej Fijalkowski]

i40e_vsi_reinit_setup() tears down the existing VSI queue/ring backing
state before allocating replacement arrays and queue tracking. If one of
these early allocations fails, the function jumps directly to err_vsi
and calls i40e_vsi_clear().

For a registered netdev, this frees the VSI while
netdev_priv(netdev)->vsi can still point at it, leaving the registered
netdev with dangling private driver state.

Split the error path so failures after destructive reinit teardown first
unregister and free the netdev before clearing the VSI.

Fixes: d2a69fefd756 ("i40e: Fix changing previously set num_queue_pairs for PFs")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a04683004a56..471fa7f7b643 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14274,7 +14274,7 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 	i40e_set_num_rings_in_vsi(vsi);
 	ret = i40e_vsi_alloc_arrays(vsi, false);
 	if (ret)
-		goto err_vsi;
+		goto err_netdev;
 
 	alloc_queue_pairs = vsi->alloc_queue_pairs *
 			    (i40e_enabled_xdp_vsi(vsi) ? 2 : 1);
@@ -14284,7 +14284,7 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 		dev_info(&pf->pdev->dev,
 			 "failed to get tracking for %d queues for VSI %d err %d\n",
 			 alloc_queue_pairs, vsi->seid, ret);
-		goto err_vsi;
+		goto err_netdev;
 	}
 	vsi->base_queue = ret;
 
@@ -14309,6 +14309,7 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 
 err_rings:
 	i40e_vsi_free_q_vectors(vsi);
+err_netdev:
 	if (vsi->netdev_registered) {
 		vsi->netdev_registered = false;
 		unregister_netdev(vsi->netdev);
@@ -14318,7 +14319,6 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 	if (vsi->type == I40E_VSI_MAIN)
 		i40e_devlink_destroy_port(pf);
 	i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
-err_vsi:
 	i40e_vsi_clear(vsi);
 	return NULL;
 }
-- 
2.43.0

[PATCH v5 net 1/7] i40e: unregister netdev before clearing VSI on reinit failure

[Maciej Fijalkowski]

i40e_vsi_reinit_setup() tears down the existing VSI queue/ring backing
state before allocating replacement arrays and queue tracking. If one of
these early allocations fails, the function jumps directly to err_vsi
and calls i40e_vsi_clear().

For a registered netdev, this frees the VSI while
netdev_priv(netdev)->vsi can still point at it, leaving the registered
netdev with dangling private driver state.

Split the error path so failures after destructive reinit teardown first
unregister and free the netdev before clearing the VSI.

Fixes: d2a69fefd756 ("i40e: Fix changing previously set num_queue_pairs for PFs")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a04683004a56..471fa7f7b643 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14274,7 +14274,7 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 	i40e_set_num_rings_in_vsi(vsi);
 	ret = i40e_vsi_alloc_arrays(vsi, false);
 	if (ret)
-		goto err_vsi;
+		goto err_netdev;
 
 	alloc_queue_pairs = vsi->alloc_queue_pairs *
 			    (i40e_enabled_xdp_vsi(vsi) ? 2 : 1);
@@ -14284,7 +14284,7 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 		dev_info(&pf->pdev->dev,
 			 "failed to get tracking for %d queues for VSI %d err %d\n",
 			 alloc_queue_pairs, vsi->seid, ret);
-		goto err_vsi;
+		goto err_netdev;
 	}
 	vsi->base_queue = ret;
 
@@ -14309,6 +14309,7 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 
 err_rings:
 	i40e_vsi_free_q_vectors(vsi);
+err_netdev:
 	if (vsi->netdev_registered) {
 		vsi->netdev_registered = false;
 		unregister_netdev(vsi->netdev);
@@ -14318,7 +14319,6 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 	if (vsi->type == I40E_VSI_MAIN)
 		i40e_devlink_destroy_port(pf);
 	i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
-err_vsi:
 	i40e_vsi_clear(vsi);
 	return NULL;
 }
-- 
2.43.0

RE: [Intel-wired-lan] [PATCH v5 net 1/7] i40e: unregister netdev before clearing VSI on reinit failure

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Maciej Fijalkowski
> Sent: Wednesday, July 1, 2026 2:45 PM
> To: intel-wired-lan@lists.osuosl.org
> Cc: netdev@vger.kernel.org; Karlsson, Magnus
> <magnus.karlsson@intel.com>; kuba@kernel.org; pabeni@redhat.com;
> horms@kernel.org; Kitszel, Przemyslaw <przemyslaw.kitszel@intel.com>;
> Keller, Jacob E <jacob.e.keller@intel.com>; Fijalkowski, Maciej
> <maciej.fijalkowski@intel.com>
> Subject: [Intel-wired-lan] [PATCH v5 net 1/7] i40e: unregister netdev
> before clearing VSI on reinit failure
> 
> i40e_vsi_reinit_setup() tears down the existing VSI queue/ring backing
> state before allocating replacement arrays and queue tracking. If one
> of these early allocations fails, the function jumps directly to
> err_vsi and calls i40e_vsi_clear().
> 
> For a registered netdev, this frees the VSI while netdev_priv(netdev)-
> >vsi can still point at it, leaving the registered netdev with
> dangling private driver state.
> 
> Split the error path so failures after destructive reinit teardown
> first unregister and free the netdev before clearing the VSI.
> 
> Fixes: d2a69fefd756 ("i40e: Fix changing previously set
> num_queue_pairs for PFs")
> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
> b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index a04683004a56..471fa7f7b643 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -14274,7 +14274,7 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
>  	i40e_set_num_rings_in_vsi(vsi);
>  	ret = i40e_vsi_alloc_arrays(vsi, false);
>  	if (ret)
> -		goto err_vsi;
> +		goto err_netdev;
> 
>  	alloc_queue_pairs = vsi->alloc_queue_pairs *
>  			    (i40e_enabled_xdp_vsi(vsi) ? 2 : 1); @@ -
> 14284,7 +14284,7 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
>  		dev_info(&pf->pdev->dev,
>  			 "failed to get tracking for %d queues for VSI %d
> err %d\n",
>  			 alloc_queue_pairs, vsi->seid, ret);
> -		goto err_vsi;
> +		goto err_netdev;
>  	}
>  	vsi->base_queue = ret;
> 
> @@ -14309,6 +14309,7 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
> 
>  err_rings:
>  	i40e_vsi_free_q_vectors(vsi);
> +err_netdev:
>  	if (vsi->netdev_registered) {
>  		vsi->netdev_registered = false;
>  		unregister_netdev(vsi->netdev);
> @@ -14318,7 +14319,6 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
>  	if (vsi->type == I40E_VSI_MAIN)
>  		i40e_devlink_destroy_port(pf);
>  	i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
> -err_vsi:
>  	i40e_vsi_clear(vsi);
>  	return NULL;
>  }
> --
> 2.43.0

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

Re: [Intel-wired-lan] [PATCH v5 net 1/7] i40e: unregister netdev before clearing VSI on reinit failure

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Maciej Fijalkowski
> Sent: Wednesday, July 1, 2026 2:45 PM
> To: intel-wired-lan@lists.osuosl.org
> Cc: netdev@vger.kernel.org; Karlsson, Magnus
> <magnus.karlsson@intel.com>; kuba@kernel.org; pabeni@redhat.com;
> horms@kernel.org; Kitszel, Przemyslaw <przemyslaw.kitszel@intel.com>;
> Keller, Jacob E <jacob.e.keller@intel.com>; Fijalkowski, Maciej
> <maciej.fijalkowski@intel.com>
> Subject: [Intel-wired-lan] [PATCH v5 net 1/7] i40e: unregister netdev
> before clearing VSI on reinit failure
> 
> i40e_vsi_reinit_setup() tears down the existing VSI queue/ring backing
> state before allocating replacement arrays and queue tracking. If one
> of these early allocations fails, the function jumps directly to
> err_vsi and calls i40e_vsi_clear().
> 
> For a registered netdev, this frees the VSI while netdev_priv(netdev)-
> >vsi can still point at it, leaving the registered netdev with
> dangling private driver state.
> 
> Split the error path so failures after destructive reinit teardown
> first unregister and free the netdev before clearing the VSI.
> 
> Fixes: d2a69fefd756 ("i40e: Fix changing previously set
> num_queue_pairs for PFs")
> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
> b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index a04683004a56..471fa7f7b643 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -14274,7 +14274,7 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
>  	i40e_set_num_rings_in_vsi(vsi);
>  	ret = i40e_vsi_alloc_arrays(vsi, false);
>  	if (ret)
> -		goto err_vsi;
> +		goto err_netdev;
> 
>  	alloc_queue_pairs = vsi->alloc_queue_pairs *
>  			    (i40e_enabled_xdp_vsi(vsi) ? 2 : 1); @@ -
> 14284,7 +14284,7 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
>  		dev_info(&pf->pdev->dev,
>  			 "failed to get tracking for %d queues for VSI %d
> err %d\n",
>  			 alloc_queue_pairs, vsi->seid, ret);
> -		goto err_vsi;
> +		goto err_netdev;
>  	}
>  	vsi->base_queue = ret;
> 
> @@ -14309,6 +14309,7 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
> 
>  err_rings:
>  	i40e_vsi_free_q_vectors(vsi);
> +err_netdev:
>  	if (vsi->netdev_registered) {
>  		vsi->netdev_registered = false;
>  		unregister_netdev(vsi->netdev);
> @@ -14318,7 +14319,6 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
>  	if (vsi->type == I40E_VSI_MAIN)
>  		i40e_devlink_destroy_port(pf);
>  	i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
> -err_vsi:
>  	i40e_vsi_clear(vsi);
>  	return NULL;
>  }
> --
> 2.43.0

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

[Intel-wired-lan] [PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Maciej Fijalkowski]

Sashiko reports:
***
If an allocation fails here during i40e_rebuild(), i40e_vsi_clear()
frees the
main VSI and sets pf->vsi[vsi->idx] = NULL, and the rebuild will abort
without
stopping the PTP clock.
Later, if the device is removed or unbound, i40e_remove()
unconditionally
calls i40e_ptp_stop(), which does:
drivers/net/ethernet/intel/i40e/i40e_ptp.c:i40e_ptp_stop() {
    ...
	struct i40e_vsi *main_vsi = i40e_pf_get_main_vsi(pf);
    ...
	dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
		 main_vsi->netdev->name);
    ...
}
Would this cause a NULL pointer dereference since main_vsi is now NULL?
***

Check if main_vsi is not null before calling dev_info().

Fixes: beb0dff1251d ("i40e: enable PTP")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ptp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
index ff62b5f2c815..ca93df4d6785 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
@@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
 	if (pf->ptp_clock) {
 		ptp_clock_unregister(pf->ptp_clock);
 		pf->ptp_clock = NULL;
-		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
-			 main_vsi->netdev->name);
+		if (main_vsi)
+			dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
+				 main_vsi->netdev->name);
 	}
 
 	if (i40e_is_ptp_pin_dev(&pf->hw)) {
-- 
2.43.0

[PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Maciej Fijalkowski]

Sashiko reports:
***
If an allocation fails here during i40e_rebuild(), i40e_vsi_clear()
frees the
main VSI and sets pf->vsi[vsi->idx] = NULL, and the rebuild will abort
without
stopping the PTP clock.
Later, if the device is removed or unbound, i40e_remove()
unconditionally
calls i40e_ptp_stop(), which does:
drivers/net/ethernet/intel/i40e/i40e_ptp.c:i40e_ptp_stop() {
    ...
	struct i40e_vsi *main_vsi = i40e_pf_get_main_vsi(pf);
    ...
	dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
		 main_vsi->netdev->name);
    ...
}
Would this cause a NULL pointer dereference since main_vsi is now NULL?
***

Check if main_vsi is not null before calling dev_info().

Fixes: beb0dff1251d ("i40e: enable PTP")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ptp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
index ff62b5f2c815..ca93df4d6785 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
@@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
 	if (pf->ptp_clock) {
 		ptp_clock_unregister(pf->ptp_clock);
 		pf->ptp_clock = NULL;
-		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
-			 main_vsi->netdev->name);
+		if (main_vsi)
+			dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
+				 main_vsi->netdev->name);
 	}
 
 	if (i40e_is_ptp_pin_dev(&pf->hw)) {
-- 
2.43.0

Re: [Intel-wired-lan] [PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Maciej Fijalkowski
> Sent: Wednesday, July 1, 2026 2:45 PM
> To: intel-wired-lan@lists.osuosl.org
> Cc: netdev@vger.kernel.org; Karlsson, Magnus
> <magnus.karlsson@intel.com>; kuba@kernel.org; pabeni@redhat.com;
> horms@kernel.org; Kitszel, Przemyslaw <przemyslaw.kitszel@intel.com>;
> Keller, Jacob E <jacob.e.keller@intel.com>; Fijalkowski, Maciej
> <maciej.fijalkowski@intel.com>; Sashiko AI Review <sashiko-
> bot@kernel.org>
> Subject: [Intel-wired-lan] [PATCH v5 net 2/7] i40e: avoid null ptr
> dereference in i40e_ptp_stop()
> 
> Sashiko reports:
> ***
> If an allocation fails here during i40e_rebuild(), i40e_vsi_clear()
> frees the main VSI and sets pf->vsi[vsi->idx] = NULL, and the rebuild
> will abort without stopping the PTP clock.
> Later, if the device is removed or unbound, i40e_remove()
> unconditionally calls i40e_ptp_stop(), which does:
> drivers/net/ethernet/intel/i40e/i40e_ptp.c:i40e_ptp_stop() {
>     ...
> 	struct i40e_vsi *main_vsi = i40e_pf_get_main_vsi(pf);
>     ...
> 	dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> 		 main_vsi->netdev->name);
>     ...
> }
> Would this cause a NULL pointer dereference since main_vsi is now
> NULL?
> ***
> 
> Check if main_vsi is not null before calling dev_info().
> 
> Fixes: beb0dff1251d ("i40e: enable PTP")
> Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_ptp.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> index ff62b5f2c815..ca93df4d6785 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> @@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
>  	if (pf->ptp_clock) {
>  		ptp_clock_unregister(pf->ptp_clock);
>  		pf->ptp_clock = NULL;
> -		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n",
> __func__,
> -			 main_vsi->netdev->name);
> +		if (main_vsi)
> +			dev_info(&pf->pdev->dev, "%s: removed PHC on
> %s\n", __func__,
> +				 main_vsi->netdev->name);
>  	}
> 
>  	if (i40e_is_ptp_pin_dev(&pf->hw)) {
> --
> 2.43.0

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

RE: [Intel-wired-lan] [PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Maciej Fijalkowski
> Sent: Wednesday, July 1, 2026 2:45 PM
> To: intel-wired-lan@lists.osuosl.org
> Cc: netdev@vger.kernel.org; Karlsson, Magnus
> <magnus.karlsson@intel.com>; kuba@kernel.org; pabeni@redhat.com;
> horms@kernel.org; Kitszel, Przemyslaw <przemyslaw.kitszel@intel.com>;
> Keller, Jacob E <jacob.e.keller@intel.com>; Fijalkowski, Maciej
> <maciej.fijalkowski@intel.com>; Sashiko AI Review <sashiko-
> bot@kernel.org>
> Subject: [Intel-wired-lan] [PATCH v5 net 2/7] i40e: avoid null ptr
> dereference in i40e_ptp_stop()
> 
> Sashiko reports:
> ***
> If an allocation fails here during i40e_rebuild(), i40e_vsi_clear()
> frees the main VSI and sets pf->vsi[vsi->idx] = NULL, and the rebuild
> will abort without stopping the PTP clock.
> Later, if the device is removed or unbound, i40e_remove()
> unconditionally calls i40e_ptp_stop(), which does:
> drivers/net/ethernet/intel/i40e/i40e_ptp.c:i40e_ptp_stop() {
>     ...
> 	struct i40e_vsi *main_vsi = i40e_pf_get_main_vsi(pf);
>     ...
> 	dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> 		 main_vsi->netdev->name);
>     ...
> }
> Would this cause a NULL pointer dereference since main_vsi is now
> NULL?
> ***
> 
> Check if main_vsi is not null before calling dev_info().
> 
> Fixes: beb0dff1251d ("i40e: enable PTP")
> Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_ptp.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> index ff62b5f2c815..ca93df4d6785 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> @@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
>  	if (pf->ptp_clock) {
>  		ptp_clock_unregister(pf->ptp_clock);
>  		pf->ptp_clock = NULL;
> -		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n",
> __func__,
> -			 main_vsi->netdev->name);
> +		if (main_vsi)
> +			dev_info(&pf->pdev->dev, "%s: removed PHC on
> %s\n", __func__,
> +				 main_vsi->netdev->name);
>  	}
> 
>  	if (i40e_is_ptp_pin_dev(&pf->hw)) {
> --
> 2.43.0

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

Re: [Intel-wired-lan] [PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Simon Horman]

This is an AI-generated review of your patch. The human sending this
email has considered the AI review valid, or at least plausible.
Full review at: https://sashiko.dev
---
i40e: avoid null ptr dereference in i40e_ptp_stop()
    
Check if main_vsi is not null before calling dev_info() to avoid a null
pointer dereference when i40e_vsi_clear() frees the main VSI during rebuild.

> diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> index ff62b5f2c8150..ca93df4d67859 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> @@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
>  	if (pf->ptp_clock) {
>  		ptp_clock_unregister(pf->ptp_clock);
>  		pf->ptp_clock = NULL;
> -		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> -			 main_vsi->netdev->name);
> +		if (main_vsi)
> +			dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> +				 main_vsi->netdev->name);

[Severity: High]
This isn't a bug introduced by this patch, but this lockless check appears
to introduce a time-of-check to time-of-use race condition.

When i40e_remove() calls i40e_ptp_stop(pf), it does so unsynchronized from
the background i40e_rebuild() task. If i40e_rebuild() fails during setup, it
calls i40e_vsi_clear(main_vsi), which frees the VSI and its netdev.

If i40e_ptp_stop() caches main_vsi right before it is cleared, couldn't the
if (main_vsi) check pass, but the subsequent main_vsi->netdev->name access
dereference freed memory, causing a use-after-free?

[Severity: High]
This is another pre-existing issue, but I noticed that i40e_ptp_stop() doesn't
seem to cancel the background workqueue task ptp_extts0_work.

During device removal, i40e_remove() calls i40e_ptp_stop() and then
subsequently frees the i40e_pf structure. If the work executes after the PF
is freed, will it access the deallocated i40e_pf structure and trigger a
use-after-free?

[Severity: High]
This is also a pre-existing issue, but I am looking at how pf->ptp_tx_skb is
cleared earlier in i40e_ptp_stop(). The teardown uses I40E_FLAG_PTP_ENA as a 
gate guard:

i40e_ptp_stop() clears I40E_FLAG_PTP_ENA, then locklessly checks and frees
pf->ptp_tx_skb using dev_kfree_skb_any().

The interrupt handler i40e_ptp_tx_hwtstamp() uses the same bit as a guard:

    if (!test_bit(I40E_FLAG_PTP_ENA, pf->flags))
            return;

If the interrupt handler passes the test_bit check just before i40e_ptp_stop()
executes clear_bit(), both contexts could concurrently read the same
pf->ptp_tx_skb pointer into local variables before it is NULLed out. Could
this result in a double free of the SKB?

[Severity: High]
There is a similar pre-existing issue related to the teardown of the
timestamping state in i40e_ptp_stop() racing with the TX datapath.

The TX datapath i40e_tstamp() protects the state using a bit lock:

    if (pf->ptp_tx &&
        !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) {
            ...
            pf->ptp_tx_skb = skb_get(skb);
    }

However, i40e_ptp_stop() checks pf->ptp_tx_skb locklessly and only clears
the bit lock if the SKB was present. If the TX datapath acquires the lock
and is preempted right before assigning pf->ptp_tx_skb, i40e_ptp_stop()
might execute, see a NULL ptp_tx_skb, and skip the cleanup block.

When the TX datapath resumes, it assigns the SKB pointer. Since the device
is subsequently destroyed, does this cause the SKB to be permanently leaked?

>  	}
>  
>  	if (i40e_is_ptp_pin_dev(&pf->hw)) {

[Severity: High]
This isn't a bug introduced by this patch, but while reviewing the driver's
cleanup paths, I noticed a potential leak in the i40e_probe() error handling:

drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_probe() {
...
err_vsis:
        set_bit(__I40E_DOWN, pf->state);
        i40e_ptp_stop(pf);
        i40e_clear_interrupt_scheme(pf);
        kfree(pf->vsi);
...
}

If initialization fails after VSIs are successfully created, this cleanup
path calls kfree(pf->vsi) which frees the pointer array, but does not appear
to unregister the netdev or free the actual VSI structs and hardware rings.

Could this leave an active, registered netdev with dangling pointers to the
subsequently freed PF, potentially triggering a use-after-free upon network
traffic or userspace access?

[Severity: High]
This is a pre-existing issue, but I noticed an ad-hoc locking pattern in
i40e_remove():

drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_remove() {
...
        while (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
                usleep_range(1000, 2000);
...
}

This attempts to synchronize with the background reset path by spinning on
a bit flag, which acts as a sleepable lock without the standard fairness or
deadlock detection guarantees. 

Since this ad-hoc locking scheme fails to provide proper mutual exclusion
earlier in the function, could this be the direct cause of why i40e_ptp_stop()
executes unsynchronized from i40e_rebuild()? Should a proper mutex be used
here instead?

Re: [PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Simon Horman]

This is an AI-generated review of your patch. The human sending this
email has considered the AI review valid, or at least plausible.
Full review at: https://sashiko.dev
---
i40e: avoid null ptr dereference in i40e_ptp_stop()
    
Check if main_vsi is not null before calling dev_info() to avoid a null
pointer dereference when i40e_vsi_clear() frees the main VSI during rebuild.

> diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> index ff62b5f2c8150..ca93df4d67859 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> @@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
>  	if (pf->ptp_clock) {
>  		ptp_clock_unregister(pf->ptp_clock);
>  		pf->ptp_clock = NULL;
> -		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> -			 main_vsi->netdev->name);
> +		if (main_vsi)
> +			dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> +				 main_vsi->netdev->name);

[Severity: High]
This isn't a bug introduced by this patch, but this lockless check appears
to introduce a time-of-check to time-of-use race condition.

When i40e_remove() calls i40e_ptp_stop(pf), it does so unsynchronized from
the background i40e_rebuild() task. If i40e_rebuild() fails during setup, it
calls i40e_vsi_clear(main_vsi), which frees the VSI and its netdev.

If i40e_ptp_stop() caches main_vsi right before it is cleared, couldn't the
if (main_vsi) check pass, but the subsequent main_vsi->netdev->name access
dereference freed memory, causing a use-after-free?

[Severity: High]
This is another pre-existing issue, but I noticed that i40e_ptp_stop() doesn't
seem to cancel the background workqueue task ptp_extts0_work.

During device removal, i40e_remove() calls i40e_ptp_stop() and then
subsequently frees the i40e_pf structure. If the work executes after the PF
is freed, will it access the deallocated i40e_pf structure and trigger a
use-after-free?

[Severity: High]
This is also a pre-existing issue, but I am looking at how pf->ptp_tx_skb is
cleared earlier in i40e_ptp_stop(). The teardown uses I40E_FLAG_PTP_ENA as a 
gate guard:

i40e_ptp_stop() clears I40E_FLAG_PTP_ENA, then locklessly checks and frees
pf->ptp_tx_skb using dev_kfree_skb_any().

The interrupt handler i40e_ptp_tx_hwtstamp() uses the same bit as a guard:

    if (!test_bit(I40E_FLAG_PTP_ENA, pf->flags))
            return;

If the interrupt handler passes the test_bit check just before i40e_ptp_stop()
executes clear_bit(), both contexts could concurrently read the same
pf->ptp_tx_skb pointer into local variables before it is NULLed out. Could
this result in a double free of the SKB?

[Severity: High]
There is a similar pre-existing issue related to the teardown of the
timestamping state in i40e_ptp_stop() racing with the TX datapath.

The TX datapath i40e_tstamp() protects the state using a bit lock:

    if (pf->ptp_tx &&
        !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) {
            ...
            pf->ptp_tx_skb = skb_get(skb);
    }

However, i40e_ptp_stop() checks pf->ptp_tx_skb locklessly and only clears
the bit lock if the SKB was present. If the TX datapath acquires the lock
and is preempted right before assigning pf->ptp_tx_skb, i40e_ptp_stop()
might execute, see a NULL ptp_tx_skb, and skip the cleanup block.

When the TX datapath resumes, it assigns the SKB pointer. Since the device
is subsequently destroyed, does this cause the SKB to be permanently leaked?

>  	}
>  
>  	if (i40e_is_ptp_pin_dev(&pf->hw)) {

[Severity: High]
This isn't a bug introduced by this patch, but while reviewing the driver's
cleanup paths, I noticed a potential leak in the i40e_probe() error handling:

drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_probe() {
...
err_vsis:
        set_bit(__I40E_DOWN, pf->state);
        i40e_ptp_stop(pf);
        i40e_clear_interrupt_scheme(pf);
        kfree(pf->vsi);
...
}

If initialization fails after VSIs are successfully created, this cleanup
path calls kfree(pf->vsi) which frees the pointer array, but does not appear
to unregister the netdev or free the actual VSI structs and hardware rings.

Could this leave an active, registered netdev with dangling pointers to the
subsequently freed PF, potentially triggering a use-after-free upon network
traffic or userspace access?

[Severity: High]
This is a pre-existing issue, but I noticed an ad-hoc locking pattern in
i40e_remove():

drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_remove() {
...
        while (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
                usleep_range(1000, 2000);
...
}

This attempts to synchronize with the background reset path by spinning on
a bit flag, which acts as a sleepable lock without the standard fairness or
deadlock detection guarantees. 

Since this ad-hoc locking scheme fails to provide proper mutual exclusion
earlier in the function, could this be the direct cause of why i40e_ptp_stop()
executes unsynchronized from i40e_rebuild()? Should a proper mutex be used
here instead?

Re: [Intel-wired-lan] [PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Maciej Fijalkowski]

On Wed, Jul 08, 2026 at 04:04:56PM +0100, Simon Horman wrote:
> This is an AI-generated review of your patch. The human sending this
> email has considered the AI review valid, or at least plausible.
> Full review at: https://sashiko.dev
> ---
> i40e: avoid null ptr dereference in i40e_ptp_stop()
>     
> Check if main_vsi is not null before calling dev_info() to avoid a null
> pointer dereference when i40e_vsi_clear() frees the main VSI during rebuild.
> 
> > diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > index ff62b5f2c8150..ca93df4d67859 100644
> > --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > @@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
> >  	if (pf->ptp_clock) {
> >  		ptp_clock_unregister(pf->ptp_clock);
> >  		pf->ptp_clock = NULL;
> > -		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> > -			 main_vsi->netdev->name);
> > +		if (main_vsi)
> > +			dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> > +				 main_vsi->netdev->name);
> 
> [Severity: High]
> This isn't a bug introduced by this patch, but this lockless check appears
> to introduce a time-of-check to time-of-use race condition.

Thanks Simon I saw these, however since all of the issues are classified
as pre-existing issues IMHO these changes are okay to be taken and then
we could go with another round of fixes.

> 
> When i40e_remove() calls i40e_ptp_stop(pf), it does so unsynchronized from
> the background i40e_rebuild() task. If i40e_rebuild() fails during setup, it
> calls i40e_vsi_clear(main_vsi), which frees the VSI and its netdev.
> 
> If i40e_ptp_stop() caches main_vsi right before it is cleared, couldn't the
> if (main_vsi) check pass, but the subsequent main_vsi->netdev->name access
> dereference freed memory, causing a use-after-free?
> 
> [Severity: High]
> This is another pre-existing issue, but I noticed that i40e_ptp_stop() doesn't
> seem to cancel the background workqueue task ptp_extts0_work.
> 
> During device removal, i40e_remove() calls i40e_ptp_stop() and then
> subsequently frees the i40e_pf structure. If the work executes after the PF
> is freed, will it access the deallocated i40e_pf structure and trigger a
> use-after-free?
> 
> [Severity: High]
> This is also a pre-existing issue, but I am looking at how pf->ptp_tx_skb is
> cleared earlier in i40e_ptp_stop(). The teardown uses I40E_FLAG_PTP_ENA as a 
> gate guard:
> 
> i40e_ptp_stop() clears I40E_FLAG_PTP_ENA, then locklessly checks and frees
> pf->ptp_tx_skb using dev_kfree_skb_any().
> 
> The interrupt handler i40e_ptp_tx_hwtstamp() uses the same bit as a guard:
> 
>     if (!test_bit(I40E_FLAG_PTP_ENA, pf->flags))
>             return;
> 
> If the interrupt handler passes the test_bit check just before i40e_ptp_stop()
> executes clear_bit(), both contexts could concurrently read the same
> pf->ptp_tx_skb pointer into local variables before it is NULLed out. Could
> this result in a double free of the SKB?
> 
> [Severity: High]
> There is a similar pre-existing issue related to the teardown of the
> timestamping state in i40e_ptp_stop() racing with the TX datapath.
> 
> The TX datapath i40e_tstamp() protects the state using a bit lock:
> 
>     if (pf->ptp_tx &&
>         !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) {
>             ...
>             pf->ptp_tx_skb = skb_get(skb);
>     }
> 
> However, i40e_ptp_stop() checks pf->ptp_tx_skb locklessly and only clears
> the bit lock if the SKB was present. If the TX datapath acquires the lock
> and is preempted right before assigning pf->ptp_tx_skb, i40e_ptp_stop()
> might execute, see a NULL ptp_tx_skb, and skip the cleanup block.
> 
> When the TX datapath resumes, it assigns the SKB pointer. Since the device
> is subsequently destroyed, does this cause the SKB to be permanently leaked?
> 
> >  	}
> >  
> >  	if (i40e_is_ptp_pin_dev(&pf->hw)) {
> 
> [Severity: High]
> This isn't a bug introduced by this patch, but while reviewing the driver's
> cleanup paths, I noticed a potential leak in the i40e_probe() error handling:
> 
> drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_probe() {
> ...
> err_vsis:
>         set_bit(__I40E_DOWN, pf->state);
>         i40e_ptp_stop(pf);
>         i40e_clear_interrupt_scheme(pf);
>         kfree(pf->vsi);
> ...
> }
> 
> If initialization fails after VSIs are successfully created, this cleanup
> path calls kfree(pf->vsi) which frees the pointer array, but does not appear
> to unregister the netdev or free the actual VSI structs and hardware rings.
> 
> Could this leave an active, registered netdev with dangling pointers to the
> subsequently freed PF, potentially triggering a use-after-free upon network
> traffic or userspace access?
> 
> [Severity: High]
> This is a pre-existing issue, but I noticed an ad-hoc locking pattern in
> i40e_remove():
> 
> drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_remove() {
> ...
>         while (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
>                 usleep_range(1000, 2000);
> ...
> }
> 
> This attempts to synchronize with the background reset path by spinning on
> a bit flag, which acts as a sleepable lock without the standard fairness or
> deadlock detection guarantees. 
> 
> Since this ad-hoc locking scheme fails to provide proper mutual exclusion
> earlier in the function, could this be the direct cause of why i40e_ptp_stop()
> executes unsynchronized from i40e_rebuild()? Should a proper mutex be used
> here instead?

Re: [PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Maciej Fijalkowski]

On Wed, Jul 08, 2026 at 04:04:56PM +0100, Simon Horman wrote:
> This is an AI-generated review of your patch. The human sending this
> email has considered the AI review valid, or at least plausible.
> Full review at: https://sashiko.dev
> ---
> i40e: avoid null ptr dereference in i40e_ptp_stop()
>     
> Check if main_vsi is not null before calling dev_info() to avoid a null
> pointer dereference when i40e_vsi_clear() frees the main VSI during rebuild.
> 
> > diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > index ff62b5f2c8150..ca93df4d67859 100644
> > --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > @@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
> >  	if (pf->ptp_clock) {
> >  		ptp_clock_unregister(pf->ptp_clock);
> >  		pf->ptp_clock = NULL;
> > -		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> > -			 main_vsi->netdev->name);
> > +		if (main_vsi)
> > +			dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> > +				 main_vsi->netdev->name);
> 
> [Severity: High]
> This isn't a bug introduced by this patch, but this lockless check appears
> to introduce a time-of-check to time-of-use race condition.

Thanks Simon I saw these, however since all of the issues are classified
as pre-existing issues IMHO these changes are okay to be taken and then
we could go with another round of fixes.

> 
> When i40e_remove() calls i40e_ptp_stop(pf), it does so unsynchronized from
> the background i40e_rebuild() task. If i40e_rebuild() fails during setup, it
> calls i40e_vsi_clear(main_vsi), which frees the VSI and its netdev.
> 
> If i40e_ptp_stop() caches main_vsi right before it is cleared, couldn't the
> if (main_vsi) check pass, but the subsequent main_vsi->netdev->name access
> dereference freed memory, causing a use-after-free?
> 
> [Severity: High]
> This is another pre-existing issue, but I noticed that i40e_ptp_stop() doesn't
> seem to cancel the background workqueue task ptp_extts0_work.
> 
> During device removal, i40e_remove() calls i40e_ptp_stop() and then
> subsequently frees the i40e_pf structure. If the work executes after the PF
> is freed, will it access the deallocated i40e_pf structure and trigger a
> use-after-free?
> 
> [Severity: High]
> This is also a pre-existing issue, but I am looking at how pf->ptp_tx_skb is
> cleared earlier in i40e_ptp_stop(). The teardown uses I40E_FLAG_PTP_ENA as a 
> gate guard:
> 
> i40e_ptp_stop() clears I40E_FLAG_PTP_ENA, then locklessly checks and frees
> pf->ptp_tx_skb using dev_kfree_skb_any().
> 
> The interrupt handler i40e_ptp_tx_hwtstamp() uses the same bit as a guard:
> 
>     if (!test_bit(I40E_FLAG_PTP_ENA, pf->flags))
>             return;
> 
> If the interrupt handler passes the test_bit check just before i40e_ptp_stop()
> executes clear_bit(), both contexts could concurrently read the same
> pf->ptp_tx_skb pointer into local variables before it is NULLed out. Could
> this result in a double free of the SKB?
> 
> [Severity: High]
> There is a similar pre-existing issue related to the teardown of the
> timestamping state in i40e_ptp_stop() racing with the TX datapath.
> 
> The TX datapath i40e_tstamp() protects the state using a bit lock:
> 
>     if (pf->ptp_tx &&
>         !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) {
>             ...
>             pf->ptp_tx_skb = skb_get(skb);
>     }
> 
> However, i40e_ptp_stop() checks pf->ptp_tx_skb locklessly and only clears
> the bit lock if the SKB was present. If the TX datapath acquires the lock
> and is preempted right before assigning pf->ptp_tx_skb, i40e_ptp_stop()
> might execute, see a NULL ptp_tx_skb, and skip the cleanup block.
> 
> When the TX datapath resumes, it assigns the SKB pointer. Since the device
> is subsequently destroyed, does this cause the SKB to be permanently leaked?
> 
> >  	}
> >  
> >  	if (i40e_is_ptp_pin_dev(&pf->hw)) {
> 
> [Severity: High]
> This isn't a bug introduced by this patch, but while reviewing the driver's
> cleanup paths, I noticed a potential leak in the i40e_probe() error handling:
> 
> drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_probe() {
> ...
> err_vsis:
>         set_bit(__I40E_DOWN, pf->state);
>         i40e_ptp_stop(pf);
>         i40e_clear_interrupt_scheme(pf);
>         kfree(pf->vsi);
> ...
> }
> 
> If initialization fails after VSIs are successfully created, this cleanup
> path calls kfree(pf->vsi) which frees the pointer array, but does not appear
> to unregister the netdev or free the actual VSI structs and hardware rings.
> 
> Could this leave an active, registered netdev with dangling pointers to the
> subsequently freed PF, potentially triggering a use-after-free upon network
> traffic or userspace access?
> 
> [Severity: High]
> This is a pre-existing issue, but I noticed an ad-hoc locking pattern in
> i40e_remove():
> 
> drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_remove() {
> ...
>         while (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
>                 usleep_range(1000, 2000);
> ...
> }
> 
> This attempts to synchronize with the background reset path by spinning on
> a bit flag, which acts as a sleepable lock without the standard fairness or
> deadlock detection guarantees. 
> 
> Since this ad-hoc locking scheme fails to provide proper mutual exclusion
> earlier in the function, could this be the direct cause of why i40e_ptp_stop()
> executes unsynchronized from i40e_rebuild()? Should a proper mutex be used
> here instead?

Re: [PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Simon Horman]

On Wed, Jul 08, 2026 at 07:22:02PM +0200, Maciej Fijalkowski wrote:
> On Wed, Jul 08, 2026 at 04:04:56PM +0100, Simon Horman wrote:
> > This is an AI-generated review of your patch. The human sending this
> > email has considered the AI review valid, or at least plausible.
> > Full review at: https://sashiko.dev
> > ---
> > i40e: avoid null ptr dereference in i40e_ptp_stop()
> >     
> > Check if main_vsi is not null before calling dev_info() to avoid a null
> > pointer dereference when i40e_vsi_clear() frees the main VSI during rebuild.
> > 
> > > diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > > index ff62b5f2c8150..ca93df4d67859 100644
> > > --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > > +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > > @@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
> > >  	if (pf->ptp_clock) {
> > >  		ptp_clock_unregister(pf->ptp_clock);
> > >  		pf->ptp_clock = NULL;
> > > -		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> > > -			 main_vsi->netdev->name);
> > > +		if (main_vsi)
> > > +			dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> > > +				 main_vsi->netdev->name);
> > 
> > [Severity: High]
> > This isn't a bug introduced by this patch, but this lockless check appears
> > to introduce a time-of-check to time-of-use race condition.
> 
> Thanks Simon I saw these, however since all of the issues are classified
> as pre-existing issues IMHO these changes are okay to be taken and then
> we could go with another round of fixes.

Yes, agreed. Sorry about the noise.

Re: [Intel-wired-lan] [PATCH v5 net 2/7] i40e: avoid null ptr dereference in i40e_ptp_stop()

[Simon Horman]

On Wed, Jul 08, 2026 at 07:22:02PM +0200, Maciej Fijalkowski wrote:
> On Wed, Jul 08, 2026 at 04:04:56PM +0100, Simon Horman wrote:
> > This is an AI-generated review of your patch. The human sending this
> > email has considered the AI review valid, or at least plausible.
> > Full review at: https://sashiko.dev
> > ---
> > i40e: avoid null ptr dereference in i40e_ptp_stop()
> >     
> > Check if main_vsi is not null before calling dev_info() to avoid a null
> > pointer dereference when i40e_vsi_clear() frees the main VSI during rebuild.
> > 
> > > diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > > index ff62b5f2c8150..ca93df4d67859 100644
> > > --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > > +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> > > @@ -1556,8 +1556,9 @@ void i40e_ptp_stop(struct i40e_pf *pf)
> > >  	if (pf->ptp_clock) {
> > >  		ptp_clock_unregister(pf->ptp_clock);
> > >  		pf->ptp_clock = NULL;
> > > -		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> > > -			 main_vsi->netdev->name);
> > > +		if (main_vsi)
> > > +			dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> > > +				 main_vsi->netdev->name);
> > 
> > [Severity: High]
> > This isn't a bug introduced by this patch, but this lockless check appears
> > to introduce a time-of-check to time-of-use race condition.
> 
> Thanks Simon I saw these, however since all of the issues are classified
> as pre-existing issues IMHO these changes are okay to be taken and then
> we could go with another round of fixes.

Yes, agreed. Sorry about the noise.

[Intel-wired-lan] [PATCH v5 net 3/7] i40e: make ring pointers unreachable before freeing via rcu

[Maciej Fijalkowski]

Sashiko reports:
***
>  err_config:
> +	i40e_vsi_free_q_vectors(vsi);
> +err_qvec:
>  	i40e_vsi_clear_rings(vsi);
This is a pre-existing issue, but can the sequence in i40e_vsi_clear_rings()
lead to an RCU ordering violation?
In i40e_vsi_clear_rings(), the rings are freed before the array pointers are
nullified:
	kfree_rcu(vsi->tx_rings[i], rcu);
	WRITE_ONCE(vsi->tx_rings[i], NULL);
Under RCU rules, a pointer must be made unreachable to new readers before it
is handed off to kfree_rcu(). Could a new RCU reader (like
i40e_get_netdev_stats_struct_tx()) fetch the pointer after kfree_rcu() is
invoked, and access freed memory if the grace period expires while the
reader is still active?
***

Save the Tx ring pointer before clearing the published ring array slots
and pass the saved pointer to kfree_rcu(). This preserves the intended
RCU ordering, where new readers can no longer discover the ring through
vsi->tx_rings/rx_rings/xdp_rings before the object is queued for
deferred freeing, while avoiding a NULL kfree_rcu() argument after the
slot has already been cleared. Since the Tx pointer is the base of the
per-queue-pair allocation block, re-reading vsi->tx_rings[i] after
WRITE_ONCE(..., NULL) would otherwise turn the free into a no-op and
leak the whole ring block.

Fixes: 9f65e15b4f98 ("i40e: Move rings from pointer to array to array of pointers")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 471fa7f7b643..a29a89192a7a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11699,11 +11699,13 @@ static void i40e_vsi_clear_rings(struct i40e_vsi *vsi)
 
 	if (vsi->tx_rings && vsi->tx_rings[0]) {
 		for (i = 0; i < vsi->alloc_queue_pairs; i++) {
-			kfree_rcu(vsi->tx_rings[i], rcu);
+			struct i40e_ring *tx_ring = vsi->tx_rings[i];
+
 			WRITE_ONCE(vsi->tx_rings[i], NULL);
 			WRITE_ONCE(vsi->rx_rings[i], NULL);
 			if (vsi->xdp_rings)
 				WRITE_ONCE(vsi->xdp_rings[i], NULL);
+			kfree_rcu(tx_ring, rcu);
 		}
 	}
 }
-- 
2.43.0

[PATCH v5 net 3/7] i40e: make ring pointers unreachable before freeing via rcu

[Maciej Fijalkowski]

Sashiko reports:
***
>  err_config:
> +	i40e_vsi_free_q_vectors(vsi);
> +err_qvec:
>  	i40e_vsi_clear_rings(vsi);
This is a pre-existing issue, but can the sequence in i40e_vsi_clear_rings()
lead to an RCU ordering violation?
In i40e_vsi_clear_rings(), the rings are freed before the array pointers are
nullified:
	kfree_rcu(vsi->tx_rings[i], rcu);
	WRITE_ONCE(vsi->tx_rings[i], NULL);
Under RCU rules, a pointer must be made unreachable to new readers before it
is handed off to kfree_rcu(). Could a new RCU reader (like
i40e_get_netdev_stats_struct_tx()) fetch the pointer after kfree_rcu() is
invoked, and access freed memory if the grace period expires while the
reader is still active?
***

Save the Tx ring pointer before clearing the published ring array slots
and pass the saved pointer to kfree_rcu(). This preserves the intended
RCU ordering, where new readers can no longer discover the ring through
vsi->tx_rings/rx_rings/xdp_rings before the object is queued for
deferred freeing, while avoiding a NULL kfree_rcu() argument after the
slot has already been cleared. Since the Tx pointer is the base of the
per-queue-pair allocation block, re-reading vsi->tx_rings[i] after
WRITE_ONCE(..., NULL) would otherwise turn the free into a no-op and
leak the whole ring block.

Fixes: 9f65e15b4f98 ("i40e: Move rings from pointer to array to array of pointers")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 471fa7f7b643..a29a89192a7a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11699,11 +11699,13 @@ static void i40e_vsi_clear_rings(struct i40e_vsi *vsi)
 
 	if (vsi->tx_rings && vsi->tx_rings[0]) {
 		for (i = 0; i < vsi->alloc_queue_pairs; i++) {
-			kfree_rcu(vsi->tx_rings[i], rcu);
+			struct i40e_ring *tx_ring = vsi->tx_rings[i];
+
 			WRITE_ONCE(vsi->tx_rings[i], NULL);
 			WRITE_ONCE(vsi->rx_rings[i], NULL);
 			if (vsi->xdp_rings)
 				WRITE_ONCE(vsi->xdp_rings[i], NULL);
+			kfree_rcu(tx_ring, rcu);
 		}
 	}
 }
-- 
2.43.0

RE: [Intel-wired-lan] [PATCH v5 net 3/7] i40e: make ring pointers unreachable before freeing via rcu

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Maciej Fijalkowski
> Sent: Wednesday, July 1, 2026 2:45 PM
> To: intel-wired-lan@lists.osuosl.org
> Cc: netdev@vger.kernel.org; Karlsson, Magnus
> <magnus.karlsson@intel.com>; kuba@kernel.org; pabeni@redhat.com;
> horms@kernel.org; Kitszel, Przemyslaw <przemyslaw.kitszel@intel.com>;
> Keller, Jacob E <jacob.e.keller@intel.com>; Fijalkowski, Maciej
> <maciej.fijalkowski@intel.com>; Sashiko AI Review <sashiko-
> bot@kernel.org>
> Subject: [Intel-wired-lan] [PATCH v5 net 3/7] i40e: make ring pointers
> unreachable before freeing via rcu
> 
> Sashiko reports:
> ***
> >  err_config:
> > +	i40e_vsi_free_q_vectors(vsi);
> > +err_qvec:
> >  	i40e_vsi_clear_rings(vsi);
> This is a pre-existing issue, but can the sequence in
> i40e_vsi_clear_rings() lead to an RCU ordering violation?
> In i40e_vsi_clear_rings(), the rings are freed before the array
> pointers are
> nullified:
> 	kfree_rcu(vsi->tx_rings[i], rcu);
> 	WRITE_ONCE(vsi->tx_rings[i], NULL);
> Under RCU rules, a pointer must be made unreachable to new readers
> before it is handed off to kfree_rcu(). Could a new RCU reader (like
> i40e_get_netdev_stats_struct_tx()) fetch the pointer after kfree_rcu()
> is invoked, and access freed memory if the grace period expires while
> the reader is still active?
> ***
> 
> Save the Tx ring pointer before clearing the published ring array
> slots and pass the saved pointer to kfree_rcu(). This preserves the
> intended RCU ordering, where new readers can no longer discover the
> ring through
> vsi->tx_rings/rx_rings/xdp_rings before the object is queued for
> deferred freeing, while avoiding a NULL kfree_rcu() argument after the
> slot has already been cleared. Since the Tx pointer is the base of the
> per-queue-pair allocation block, re-reading vsi->tx_rings[i] after
> WRITE_ONCE(..., NULL) would otherwise turn the free into a no-op and
> leak the whole ring block.
> 
> Fixes: 9f65e15b4f98 ("i40e: Move rings from pointer to array to array
> of pointers")
> Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_main.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
> b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index 471fa7f7b643..a29a89192a7a 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -11699,11 +11699,13 @@ static void i40e_vsi_clear_rings(struct
> i40e_vsi *vsi)
> 
>  	if (vsi->tx_rings && vsi->tx_rings[0]) {
>  		for (i = 0; i < vsi->alloc_queue_pairs; i++) {
> -			kfree_rcu(vsi->tx_rings[i], rcu);
> +			struct i40e_ring *tx_ring = vsi->tx_rings[i];
> +
>  			WRITE_ONCE(vsi->tx_rings[i], NULL);
>  			WRITE_ONCE(vsi->rx_rings[i], NULL);
>  			if (vsi->xdp_rings)
>  				WRITE_ONCE(vsi->xdp_rings[i], NULL);
> +			kfree_rcu(tx_ring, rcu);
>  		}
>  	}
>  }
> --
> 2.43.0

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

Re: [Intel-wired-lan] [PATCH v5 net 3/7] i40e: make ring pointers unreachable before freeing via rcu

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Maciej Fijalkowski
> Sent: Wednesday, July 1, 2026 2:45 PM
> To: intel-wired-lan@lists.osuosl.org
> Cc: netdev@vger.kernel.org; Karlsson, Magnus
> <magnus.karlsson@intel.com>; kuba@kernel.org; pabeni@redhat.com;
> horms@kernel.org; Kitszel, Przemyslaw <przemyslaw.kitszel@intel.com>;
> Keller, Jacob E <jacob.e.keller@intel.com>; Fijalkowski, Maciej
> <maciej.fijalkowski@intel.com>; Sashiko AI Review <sashiko-
> bot@kernel.org>
> Subject: [Intel-wired-lan] [PATCH v5 net 3/7] i40e: make ring pointers
> unreachable before freeing via rcu
> 
> Sashiko reports:
> ***
> >  err_config:
> > +	i40e_vsi_free_q_vectors(vsi);
> > +err_qvec:
> >  	i40e_vsi_clear_rings(vsi);
> This is a pre-existing issue, but can the sequence in
> i40e_vsi_clear_rings() lead to an RCU ordering violation?
> In i40e_vsi_clear_rings(), the rings are freed before the array
> pointers are
> nullified:
> 	kfree_rcu(vsi->tx_rings[i], rcu);
> 	WRITE_ONCE(vsi->tx_rings[i], NULL);
> Under RCU rules, a pointer must be made unreachable to new readers
> before it is handed off to kfree_rcu(). Could a new RCU reader (like
> i40e_get_netdev_stats_struct_tx()) fetch the pointer after kfree_rcu()
> is invoked, and access freed memory if the grace period expires while
> the reader is still active?
> ***
> 
> Save the Tx ring pointer before clearing the published ring array
> slots and pass the saved pointer to kfree_rcu(). This preserves the
> intended RCU ordering, where new readers can no longer discover the
> ring through
> vsi->tx_rings/rx_rings/xdp_rings before the object is queued for
> deferred freeing, while avoiding a NULL kfree_rcu() argument after the
> slot has already been cleared. Since the Tx pointer is the base of the
> per-queue-pair allocation block, re-reading vsi->tx_rings[i] after
> WRITE_ONCE(..., NULL) would otherwise turn the free into a no-op and
> leak the whole ring block.
> 
> Fixes: 9f65e15b4f98 ("i40e: Move rings from pointer to array to array
> of pointers")
> Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_main.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
> b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index 471fa7f7b643..a29a89192a7a 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -11699,11 +11699,13 @@ static void i40e_vsi_clear_rings(struct
> i40e_vsi *vsi)
> 
>  	if (vsi->tx_rings && vsi->tx_rings[0]) {
>  		for (i = 0; i < vsi->alloc_queue_pairs; i++) {
> -			kfree_rcu(vsi->tx_rings[i], rcu);
> +			struct i40e_ring *tx_ring = vsi->tx_rings[i];
> +
>  			WRITE_ONCE(vsi->tx_rings[i], NULL);
>  			WRITE_ONCE(vsi->rx_rings[i], NULL);
>  			if (vsi->xdp_rings)
>  				WRITE_ONCE(vsi->xdp_rings[i], NULL);
> +			kfree_rcu(tx_ring, rcu);
>  		}
>  	}
>  }
> --
> 2.43.0

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

[Intel-wired-lan] [PATCH v5 net 4/7] i40e: avoid deadlock when calling unregister_netdev()

[Maciej Fijalkowski]

Sashiko reports:
***
> +err_netdev:
>  	if (vsi->netdev_registered) {
>  		vsi->netdev_registered = false;
>  		unregister_netdev(vsi->netdev);
Could this result in a deadlock when called during a device rebuild?
Looking at i40e_rebuild(), it explicitly acquires the RTNL lock before
proceeding:
drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_rebuild() {
    ...
	if (!lock_acquired)
		rtnl_lock();
	ret = i40e_setup_pf_switch(pf, reinit, true);
    ...
}
If i40e_setup_pf_switch() calls i40e_vsi_reinit_setup() and takes this new
err_netdev path, unregister_netdev() will unconditionally attempt to acquire
rtnl_lock(), leading to a deadlock on the non-recursive mutex.
***

Use unregister_netdevice() when the rebuild path already holds RTNL, and
keep unregister_netdev() for callers that do not. This avoids both
recursive RTNL locking and dropping RTNL in the middle of the VSI unwind
path.

Fixes: bc7d338fbb3f ("i40e: reinit flow for the main VSI")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a29a89192a7a..e88cf7cfbd84 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14257,7 +14257,8 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
  * Returns pointer to the successfully allocated and configured VSI sw struct
  * on success, otherwise returns NULL on failure.
  **/
-static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
+static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi,
+					      bool lock_acquired)
 {
 	struct i40e_vsi *main_vsi;
 	u16 alloc_queue_pairs;
@@ -14314,7 +14315,10 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 err_netdev:
 	if (vsi->netdev_registered) {
 		vsi->netdev_registered = false;
-		unregister_netdev(vsi->netdev);
+		if (lock_acquired)
+			unregister_netdevice(vsi->netdev);
+		else
+			unregister_netdev(vsi->netdev);
 		free_netdev(vsi->netdev);
 		vsi->netdev = NULL;
 	}
@@ -15036,7 +15040,7 @@ static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit, bool lock_acqui
 			main_vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN,
 						  uplink_seid, 0);
 		else if (reinit)
-			main_vsi = i40e_vsi_reinit_setup(main_vsi);
+			main_vsi = i40e_vsi_reinit_setup(main_vsi, lock_acquired);
 		if (!main_vsi) {
 			dev_info(&pf->pdev->dev, "setup of MAIN VSI failed\n");
 			i40e_cloud_filter_exit(pf);
-- 
2.43.0

[PATCH v5 net 4/7] i40e: avoid deadlock when calling unregister_netdev()

[Maciej Fijalkowski]

Sashiko reports:
***
> +err_netdev:
>  	if (vsi->netdev_registered) {
>  		vsi->netdev_registered = false;
>  		unregister_netdev(vsi->netdev);
Could this result in a deadlock when called during a device rebuild?
Looking at i40e_rebuild(), it explicitly acquires the RTNL lock before
proceeding:
drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_rebuild() {
    ...
	if (!lock_acquired)
		rtnl_lock();
	ret = i40e_setup_pf_switch(pf, reinit, true);
    ...
}
If i40e_setup_pf_switch() calls i40e_vsi_reinit_setup() and takes this new
err_netdev path, unregister_netdev() will unconditionally attempt to acquire
rtnl_lock(), leading to a deadlock on the non-recursive mutex.
***

Use unregister_netdevice() when the rebuild path already holds RTNL, and
keep unregister_netdev() for callers that do not. This avoids both
recursive RTNL locking and dropping RTNL in the middle of the VSI unwind
path.

Fixes: bc7d338fbb3f ("i40e: reinit flow for the main VSI")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a29a89192a7a..e88cf7cfbd84 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14257,7 +14257,8 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
  * Returns pointer to the successfully allocated and configured VSI sw struct
  * on success, otherwise returns NULL on failure.
  **/
-static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
+static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi,
+					      bool lock_acquired)
 {
 	struct i40e_vsi *main_vsi;
 	u16 alloc_queue_pairs;
@@ -14314,7 +14315,10 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 err_netdev:
 	if (vsi->netdev_registered) {
 		vsi->netdev_registered = false;
-		unregister_netdev(vsi->netdev);
+		if (lock_acquired)
+			unregister_netdevice(vsi->netdev);
+		else
+			unregister_netdev(vsi->netdev);
 		free_netdev(vsi->netdev);
 		vsi->netdev = NULL;
 	}
@@ -15036,7 +15040,7 @@ static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit, bool lock_acqui
 			main_vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN,
 						  uplink_seid, 0);
 		else if (reinit)
-			main_vsi = i40e_vsi_reinit_setup(main_vsi);
+			main_vsi = i40e_vsi_reinit_setup(main_vsi, lock_acquired);
 		if (!main_vsi) {
 			dev_info(&pf->pdev->dev, "setup of MAIN VSI failed\n");
 			i40e_cloud_filter_exit(pf);
-- 
2.43.0

RE: [Intel-wired-lan] [PATCH v5 net 4/7] i40e: avoid deadlock when calling unregister_netdev()

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Maciej Fijalkowski
> Sent: Wednesday, July 1, 2026 2:45 PM
> To: intel-wired-lan@lists.osuosl.org
> Cc: netdev@vger.kernel.org; Karlsson, Magnus
> <magnus.karlsson@intel.com>; kuba@kernel.org; pabeni@redhat.com;
> horms@kernel.org; Kitszel, Przemyslaw <przemyslaw.kitszel@intel.com>;
> Keller, Jacob E <jacob.e.keller@intel.com>; Fijalkowski, Maciej
> <maciej.fijalkowski@intel.com>; Sashiko AI Review <sashiko-
> bot@kernel.org>
> Subject: [Intel-wired-lan] [PATCH v5 net 4/7] i40e: avoid deadlock
> when calling unregister_netdev()
> 
> Sashiko reports:
> ***
> > +err_netdev:
> >  	if (vsi->netdev_registered) {
> >  		vsi->netdev_registered = false;
> >  		unregister_netdev(vsi->netdev);
> Could this result in a deadlock when called during a device rebuild?
> Looking at i40e_rebuild(), it explicitly acquires the RTNL lock before
> proceeding:
> drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_rebuild() {
>     ...
> 	if (!lock_acquired)
> 		rtnl_lock();
> 	ret = i40e_setup_pf_switch(pf, reinit, true);
>     ...
> }
> If i40e_setup_pf_switch() calls i40e_vsi_reinit_setup() and takes this
> new err_netdev path, unregister_netdev() will unconditionally attempt
> to acquire rtnl_lock(), leading to a deadlock on the non-recursive
> mutex.
> ***
> 
> Use unregister_netdevice() when the rebuild path already holds RTNL,
> and keep unregister_netdev() for callers that do not. This avoids both
> recursive RTNL locking and dropping RTNL in the middle of the VSI
> unwind path.
> 
> Fixes: bc7d338fbb3f ("i40e: reinit flow for the main VSI")
> Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
> b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index a29a89192a7a..e88cf7cfbd84 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -14257,7 +14257,8 @@ static int i40e_vsi_setup_vectors(struct
> i40e_vsi *vsi)
>   * Returns pointer to the successfully allocated and configured VSI
> sw struct
>   * on success, otherwise returns NULL on failure.
>   **/
> -static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
> +static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi,
> +					      bool lock_acquired)
>  {
>  	struct i40e_vsi *main_vsi;
>  	u16 alloc_queue_pairs;
> @@ -14314,7 +14315,10 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
>  err_netdev:
>  	if (vsi->netdev_registered) {
>  		vsi->netdev_registered = false;
> -		unregister_netdev(vsi->netdev);
> +		if (lock_acquired)
> +			unregister_netdevice(vsi->netdev);
> +		else
> +			unregister_netdev(vsi->netdev);
>  		free_netdev(vsi->netdev);
>  		vsi->netdev = NULL;
>  	}
> @@ -15036,7 +15040,7 @@ static int i40e_setup_pf_switch(struct i40e_pf
> *pf, bool reinit, bool lock_acqui
>  			main_vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN,
>  						  uplink_seid, 0);
>  		else if (reinit)
> -			main_vsi = i40e_vsi_reinit_setup(main_vsi);
> +			main_vsi = i40e_vsi_reinit_setup(main_vsi,
> lock_acquired);
>  		if (!main_vsi) {
>  			dev_info(&pf->pdev->dev, "setup of MAIN VSI
> failed\n");
>  			i40e_cloud_filter_exit(pf);
> --
> 2.43.0


Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

Re: [Intel-wired-lan] [PATCH v5 net 4/7] i40e: avoid deadlock when calling unregister_netdev()

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Maciej Fijalkowski
> Sent: Wednesday, July 1, 2026 2:45 PM
> To: intel-wired-lan@lists.osuosl.org
> Cc: netdev@vger.kernel.org; Karlsson, Magnus
> <magnus.karlsson@intel.com>; kuba@kernel.org; pabeni@redhat.com;
> horms@kernel.org; Kitszel, Przemyslaw <przemyslaw.kitszel@intel.com>;
> Keller, Jacob E <jacob.e.keller@intel.com>; Fijalkowski, Maciej
> <maciej.fijalkowski@intel.com>; Sashiko AI Review <sashiko-
> bot@kernel.org>
> Subject: [Intel-wired-lan] [PATCH v5 net 4/7] i40e: avoid deadlock
> when calling unregister_netdev()
> 
> Sashiko reports:
> ***
> > +err_netdev:
> >  	if (vsi->netdev_registered) {
> >  		vsi->netdev_registered = false;
> >  		unregister_netdev(vsi->netdev);
> Could this result in a deadlock when called during a device rebuild?
> Looking at i40e_rebuild(), it explicitly acquires the RTNL lock before
> proceeding:
> drivers/net/ethernet/intel/i40e/i40e_main.c:i40e_rebuild() {
>     ...
> 	if (!lock_acquired)
> 		rtnl_lock();
> 	ret = i40e_setup_pf_switch(pf, reinit, true);
>     ...
> }
> If i40e_setup_pf_switch() calls i40e_vsi_reinit_setup() and takes this
> new err_netdev path, unregister_netdev() will unconditionally attempt
> to acquire rtnl_lock(), leading to a deadlock on the non-recursive
> mutex.
> ***
> 
> Use unregister_netdevice() when the rebuild path already holds RTNL,
> and keep unregister_netdev() for callers that do not. This avoids both
> recursive RTNL locking and dropping RTNL in the middle of the VSI
> unwind path.
> 
> Fixes: bc7d338fbb3f ("i40e: reinit flow for the main VSI")
> Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
> b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index a29a89192a7a..e88cf7cfbd84 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -14257,7 +14257,8 @@ static int i40e_vsi_setup_vectors(struct
> i40e_vsi *vsi)
>   * Returns pointer to the successfully allocated and configured VSI
> sw struct
>   * on success, otherwise returns NULL on failure.
>   **/
> -static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
> +static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi,
> +					      bool lock_acquired)
>  {
>  	struct i40e_vsi *main_vsi;
>  	u16 alloc_queue_pairs;
> @@ -14314,7 +14315,10 @@ static struct i40e_vsi
> *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
>  err_netdev:
>  	if (vsi->netdev_registered) {
>  		vsi->netdev_registered = false;
> -		unregister_netdev(vsi->netdev);
> +		if (lock_acquired)
> +			unregister_netdevice(vsi->netdev);
> +		else
> +			unregister_netdev(vsi->netdev);
>  		free_netdev(vsi->netdev);
>  		vsi->netdev = NULL;
>  	}
> @@ -15036,7 +15040,7 @@ static int i40e_setup_pf_switch(struct i40e_pf
> *pf, bool reinit, bool lock_acqui
>  			main_vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN,
>  						  uplink_seid, 0);
>  		else if (reinit)
> -			main_vsi = i40e_vsi_reinit_setup(main_vsi);
> +			main_vsi = i40e_vsi_reinit_setup(main_vsi,
> lock_acquired);
>  		if (!main_vsi) {
>  			dev_info(&pf->pdev->dev, "setup of MAIN VSI
> failed\n");
>  			i40e_cloud_filter_exit(pf);
> --
> 2.43.0


Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

[Intel-wired-lan] [PATCH v5 net 5/7] i40e: fix potential UAF in i40e_vsi_setup()'s error path

[Maciej Fijalkowski]

Sashiko pointed out an issue where error path in i40e_vsi_reinit_setup()
released ring memory but then when freeing q_vectors, the rings mapped
to q_vectors where touched which implies a regular use-after-free bug.

Apparently i40e_vsi_setup() has the same problem, so swap the allocation
and freeing order and fix the 13 year old bug.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index e88cf7cfbd84..fcdd13af08ea 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14466,14 +14466,14 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 		fallthrough;
 	case I40E_VSI_FDIR:
 		/* set up vectors and rings if needed */
-		ret = i40e_vsi_setup_vectors(vsi);
-		if (ret)
-			goto err_msix;
-
 		ret = i40e_alloc_rings(vsi);
 		if (ret)
 			goto err_rings;
 
+		ret = i40e_vsi_setup_vectors(vsi);
+		if (ret)
+			goto err_qvec;
+
 		/* map all of the rings to the q_vectors */
 		i40e_vsi_map_rings_to_vectors(vsi);
 
@@ -14493,10 +14493,10 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 	return vsi;
 
 err_config:
+	i40e_vsi_free_q_vectors(vsi);
+err_qvec:
 	i40e_vsi_clear_rings(vsi);
 err_rings:
-	i40e_vsi_free_q_vectors(vsi);
-err_msix:
 	if (vsi->netdev_registered) {
 		vsi->netdev_registered = false;
 		unregister_netdev(vsi->netdev);
-- 
2.43.0

[PATCH v5 net 5/7] i40e: fix potential UAF in i40e_vsi_setup()'s error path

[Maciej Fijalkowski]

Sashiko pointed out an issue where error path in i40e_vsi_reinit_setup()
released ring memory but then when freeing q_vectors, the rings mapped
to q_vectors where touched which implies a regular use-after-free bug.

Apparently i40e_vsi_setup() has the same problem, so swap the allocation
and freeing order and fix the 13 year old bug.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index e88cf7cfbd84..fcdd13af08ea 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14466,14 +14466,14 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 		fallthrough;
 	case I40E_VSI_FDIR:
 		/* set up vectors and rings if needed */
-		ret = i40e_vsi_setup_vectors(vsi);
-		if (ret)
-			goto err_msix;
-
 		ret = i40e_alloc_rings(vsi);
 		if (ret)
 			goto err_rings;
 
+		ret = i40e_vsi_setup_vectors(vsi);
+		if (ret)
+			goto err_qvec;
+
 		/* map all of the rings to the q_vectors */
 		i40e_vsi_map_rings_to_vectors(vsi);
 
@@ -14493,10 +14493,10 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 	return vsi;
 
 err_config:
+	i40e_vsi_free_q_vectors(vsi);
+err_qvec:
 	i40e_vsi_clear_rings(vsi);
 err_rings:
-	i40e_vsi_free_q_vectors(vsi);
-err_msix:
 	if (vsi->netdev_registered) {
 		vsi->netdev_registered = false;
 		unregister_netdev(vsi->netdev);
-- 
2.43.0

[Intel-wired-lan] [PATCH v5 net 6/7] i40e: do not expose netdev too early

[Maciej Fijalkowski]

i40e_vsi_setup() registers the netdev before rings and q_vectors are fully
allocated and mapped. Once register_netdev() returns, userspace can reach
netdev callbacks such as ndo_open(), so the VSI backing state must already
be ready.

Move register_netdev() to the end of the setup path, after ring/q_vector
allocation, ring mapping and RSS configuration. Keep freeing an allocated
but not registered netdev on the error path.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 29 ++++++++++++---------
 1 file changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index fcdd13af08ea..a9ec53cfd905 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14454,15 +14454,6 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 				goto err_netdev;
 			SET_NETDEV_DEVLINK_PORT(vsi->netdev, &pf->devlink_port);
 		}
-		ret = register_netdev(vsi->netdev);
-		if (ret)
-			goto err_dl_port;
-		vsi->netdev_registered = true;
-		netif_carrier_off(vsi->netdev);
-#ifdef CONFIG_I40E_DCB
-		/* Setup DCB netlink interface */
-		i40e_dcbnl_setup(vsi);
-#endif /* CONFIG_I40E_DCB */
 		fallthrough;
 	case I40E_VSI_FDIR:
 		/* set up vectors and rings if needed */
@@ -14490,6 +14481,19 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 		if (ret)
 			goto err_config;
 	}
+
+	if (vsi->netdev) {
+		ret = register_netdev(vsi->netdev);
+		if (ret)
+			goto err_config;
+		vsi->netdev_registered = true;
+		netif_carrier_off(vsi->netdev);
+#ifdef CONFIG_I40E_DCB
+		/* Setup DCB netlink interface */
+		i40e_dcbnl_setup(vsi);
+#endif /* CONFIG_I40E_DCB */
+	}
+
 	return vsi;
 
 err_config:
@@ -14500,13 +14504,14 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 	if (vsi->netdev_registered) {
 		vsi->netdev_registered = false;
 		unregister_netdev(vsi->netdev);
-		free_netdev(vsi->netdev);
-		vsi->netdev = NULL;
 	}
-err_dl_port:
 	if (vsi->type == I40E_VSI_MAIN)
 		i40e_devlink_destroy_port(pf);
 err_netdev:
+	if (vsi->netdev) {
+		free_netdev(vsi->netdev);
+		vsi->netdev = NULL;
+	}
 	i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
 err_vsi:
 	i40e_vsi_clear(vsi);
-- 
2.43.0

[PATCH v5 net 6/7] i40e: do not expose netdev too early

[Maciej Fijalkowski]

i40e_vsi_setup() registers the netdev before rings and q_vectors are fully
allocated and mapped. Once register_netdev() returns, userspace can reach
netdev callbacks such as ndo_open(), so the VSI backing state must already
be ready.

Move register_netdev() to the end of the setup path, after ring/q_vector
allocation, ring mapping and RSS configuration. Keep freeing an allocated
but not registered netdev on the error path.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 29 ++++++++++++---------
 1 file changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index fcdd13af08ea..a9ec53cfd905 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14454,15 +14454,6 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 				goto err_netdev;
 			SET_NETDEV_DEVLINK_PORT(vsi->netdev, &pf->devlink_port);
 		}
-		ret = register_netdev(vsi->netdev);
-		if (ret)
-			goto err_dl_port;
-		vsi->netdev_registered = true;
-		netif_carrier_off(vsi->netdev);
-#ifdef CONFIG_I40E_DCB
-		/* Setup DCB netlink interface */
-		i40e_dcbnl_setup(vsi);
-#endif /* CONFIG_I40E_DCB */
 		fallthrough;
 	case I40E_VSI_FDIR:
 		/* set up vectors and rings if needed */
@@ -14490,6 +14481,19 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 		if (ret)
 			goto err_config;
 	}
+
+	if (vsi->netdev) {
+		ret = register_netdev(vsi->netdev);
+		if (ret)
+			goto err_config;
+		vsi->netdev_registered = true;
+		netif_carrier_off(vsi->netdev);
+#ifdef CONFIG_I40E_DCB
+		/* Setup DCB netlink interface */
+		i40e_dcbnl_setup(vsi);
+#endif /* CONFIG_I40E_DCB */
+	}
+
 	return vsi;
 
 err_config:
@@ -14500,13 +14504,14 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 	if (vsi->netdev_registered) {
 		vsi->netdev_registered = false;
 		unregister_netdev(vsi->netdev);
-		free_netdev(vsi->netdev);
-		vsi->netdev = NULL;
 	}
-err_dl_port:
 	if (vsi->type == I40E_VSI_MAIN)
 		i40e_devlink_destroy_port(pf);
 err_netdev:
+	if (vsi->netdev) {
+		free_netdev(vsi->netdev);
+		vsi->netdev = NULL;
+	}
 	i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
 err_vsi:
 	i40e_vsi_clear(vsi);
-- 
2.43.0

[Intel-wired-lan] [PATCH v5 net 7/7] i40e: keep q_vectors array in sync with channel count changes

[Maciej Fijalkowski]

For the main VSI, i40e_set_num_rings_in_vsi() always derives
num_q_vectors from pf->num_lan_msix. At the same time, ethtool -L stores
the user requested channel count in vsi->req_queue_pairs and the queue
setup path uses that value for the effective number of queue pairs.

This leaves queue and vector counts out of sync after shrinking channel
count via ethtool -L. The active queue configuration is reduced, but the
VSI still keeps the full PF-sized q_vector topology.

That mismatch breaks reconfiguration flows which rely on vector/NAPI
state matching the effective channel configuration. In particular,
toggling /sys/class/net/<dev>/threaded after reducing the channel count
can hang, and later channel-count changes can fail because VSI reinit
does not rebuild q_vectors to match the new vector count.

Fix this by making the main VSI num_q_vectors follow the effective
requested channel count, capped by the available MSI-X vectors. Update
i40e_vsi_reinit_setup() to rebuild q_vectors during VSI reinit so the
vector topology is refreshed together with the ring arrays when channel
count changes.

Keep alloc_queue_pairs unchanged and based on pf->num_lan_qps so the VSI
retains its full queue capacity. Also do not touch irq_pile when
rebuilding vectors.

Selftest napi_threaded.py was originally used when Jakub reported hang
on /sys/class/net/<dev>/threaded toggle. In order to make it pass on
i40e, use persistent NAPI configuration for q_vector NAPIs so NAPI
identity and threaded settings survive q_vector reallocation across
channel-count changes. This is achieved by using netif_napi_add_config()
when configuring q_vectors.

$ export NETIF=ens259f1np1
$ sudo -E env PATH="$PATH" ./tools/testing/selftests/drivers/net/napi_threaded.py
TAP version 13
1..3
ok 1 napi_threaded.napi_init
ok 2 napi_threaded.change_num_queues
ok 3 napi_threaded.enable_dev_threaded_disable_napi_threaded
Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0

Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/intel-wired-lan/20260316133100.6054a11f@kernel.org/
Fixes: d2a69fefd756 ("i40e: Fix changing previously set num_queue_pairs for PFs")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 69 +++++++++++++--------
 1 file changed, 44 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a9ec53cfd905..8a23bd99bd12 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11406,10 +11406,14 @@ static void i40e_service_timer(struct timer_list *t)
 static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
 {
 	struct i40e_pf *pf = vsi->back;
+	u16 qps;
 
 	switch (vsi->type) {
 	case I40E_VSI_MAIN:
 		vsi->alloc_queue_pairs = pf->num_lan_qps;
+		qps = vsi->req_queue_pairs ?
+		      min(vsi->req_queue_pairs, pf->num_lan_qps) :
+		      pf->num_lan_qps;
 		if (!vsi->num_tx_desc)
 			vsi->num_tx_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
 						 I40E_REQ_DESCRIPTOR_MULTIPLE);
@@ -11417,7 +11421,7 @@ static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
 			vsi->num_rx_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
 						 I40E_REQ_DESCRIPTOR_MULTIPLE);
 		if (test_bit(I40E_FLAG_MSIX_ENA, pf->flags))
-			vsi->num_q_vectors = pf->num_lan_msix;
+			vsi->num_q_vectors = clamp(qps, 1, pf->num_lan_msix);
 		else
 			vsi->num_q_vectors = 1;
 
@@ -11469,12 +11473,11 @@ static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
 /**
  * i40e_vsi_alloc_arrays - Allocate queue and vector pointer arrays for the vsi
  * @vsi: VSI pointer
- * @alloc_qvectors: a bool to specify if q_vectors need to be allocated.
  *
  * On error: returns error code (negative)
  * On success: returns 0
  **/
-static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi, bool alloc_qvectors)
+static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi)
 {
 	struct i40e_ring **next_rings;
 	int size;
@@ -11493,19 +11496,20 @@ static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi, bool alloc_qvectors)
 	}
 	vsi->rx_rings = next_rings;
 
-	if (alloc_qvectors) {
-		/* allocate memory for q_vector pointers */
-		size = sizeof(struct i40e_q_vector *) * vsi->num_q_vectors;
-		vsi->q_vectors = kzalloc(size, GFP_KERNEL);
-		if (!vsi->q_vectors) {
-			ret = -ENOMEM;
-			goto err_vectors;
-		}
+	/* allocate memory for q_vector pointers */
+	size = sizeof(struct i40e_q_vector *) * vsi->num_q_vectors;
+	vsi->q_vectors = kzalloc(size, GFP_KERNEL);
+	if (!vsi->q_vectors) {
+		ret = -ENOMEM;
+		goto err_vectors;
 	}
 	return ret;
 
 err_vectors:
 	kfree(vsi->tx_rings);
+	vsi->tx_rings = NULL;
+	vsi->rx_rings = NULL;
+	vsi->xdp_rings = NULL;
 	return ret;
 }
 
@@ -11578,7 +11582,7 @@ static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
 	if (ret)
 		goto err_rings;
 
-	ret = i40e_vsi_alloc_arrays(vsi, true);
+	ret = i40e_vsi_alloc_arrays(vsi);
 	if (ret)
 		goto err_rings;
 
@@ -11603,18 +11607,15 @@ static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
 /**
  * i40e_vsi_free_arrays - Free queue and vector pointer arrays for the VSI
  * @vsi: VSI pointer
- * @free_qvectors: a bool to specify if q_vectors need to be freed.
  *
  * On error: returns error code (negative)
  * On success: returns 0
  **/
-static void i40e_vsi_free_arrays(struct i40e_vsi *vsi, bool free_qvectors)
+static void i40e_vsi_free_arrays(struct i40e_vsi *vsi)
 {
 	/* free the ring and vector containers */
-	if (free_qvectors) {
-		kfree(vsi->q_vectors);
-		vsi->q_vectors = NULL;
-	}
+	kfree(vsi->q_vectors);
+	vsi->q_vectors = NULL;
 	kfree(vsi->tx_rings);
 	vsi->tx_rings = NULL;
 	vsi->rx_rings = NULL;
@@ -11674,7 +11675,7 @@ static int i40e_vsi_clear(struct i40e_vsi *vsi)
 	i40e_put_lump(pf->irq_pile, vsi->base_vector, vsi->idx);
 
 	bitmap_free(vsi->af_xdp_zc_qps);
-	i40e_vsi_free_arrays(vsi, true);
+	i40e_vsi_free_arrays(vsi);
 	i40e_clear_rss_config_user(vsi);
 
 	pf->vsi[vsi->idx] = NULL;
@@ -12048,7 +12049,8 @@ static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx)
 	cpumask_copy(&q_vector->affinity_mask, cpu_possible_mask);
 
 	if (vsi->netdev)
-		netif_napi_add(vsi->netdev, &q_vector->napi, i40e_napi_poll);
+		netif_napi_add_config(vsi->netdev, &q_vector->napi,
+				      i40e_napi_poll, v_idx);
 
 	/* tie q_vector and vsi together */
 	vsi->q_vectors[v_idx] = q_vector;
@@ -14203,8 +14205,9 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
  **/
 static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 {
-	int ret = -ENOENT;
 	struct i40e_pf *pf = vsi->back;
+	bool reuse_irq_lump = false;
+	int ret = -ENOENT;
 
 	if (vsi->q_vectors[0]) {
 		dev_info(&pf->pdev->dev, "VSI %d has existing q_vectors\n",
@@ -14212,7 +14215,10 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 		return -EEXIST;
 	}
 
-	if (vsi->base_vector) {
+	if (vsi->type == I40E_VSI_MAIN && vsi->base_vector)
+		reuse_irq_lump = true;
+
+	if (vsi->base_vector && !reuse_irq_lump) {
 		dev_info(&pf->pdev->dev, "VSI %d has non-zero base vector %d\n",
 			 vsi->seid, vsi->base_vector);
 		return -EEXIST;
@@ -14232,6 +14238,10 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 	*/
 	if (!test_bit(I40E_FLAG_MSIX_ENA, pf->flags))
 		return ret;
+
+	if (reuse_irq_lump)
+		return ret;
+
 	if (vsi->num_q_vectors)
 		vsi->base_vector = i40e_get_lump(pf, pf->irq_pile,
 						 vsi->num_q_vectors, vsi->idx);
@@ -14271,11 +14281,20 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi,
 	pf = vsi->back;
 
 	i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
+	i40e_vsi_free_q_vectors(vsi);
 	i40e_vsi_clear_rings(vsi);
+	i40e_vsi_free_arrays(vsi);
 
-	i40e_vsi_free_arrays(vsi, false);
 	i40e_set_num_rings_in_vsi(vsi);
-	ret = i40e_vsi_alloc_arrays(vsi, false);
+	ret = i40e_vsi_alloc_arrays(vsi);
+	if (ret)
+		goto err_netdev;
+
+	/* Rebuild q_vectors during VSI reinit because the effective channel
+	 * count may change num_q_vectors. Keep vector topology aligned with the
+	 * queue configuration after ethtool's .set_channels() callback.
+	 */
+	ret = i40e_vsi_setup_vectors(vsi);
 	if (ret)
 		goto err_netdev;
 
@@ -14287,7 +14306,7 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi,
 		dev_info(&pf->pdev->dev,
 			 "failed to get tracking for %d queues for VSI %d err %d\n",
 			 alloc_queue_pairs, vsi->seid, ret);
-		goto err_netdev;
+		goto err_rings;
 	}
 	vsi->base_queue = ret;
 
-- 
2.43.0

[PATCH v5 net 7/7] i40e: keep q_vectors array in sync with channel count changes

[Maciej Fijalkowski]

For the main VSI, i40e_set_num_rings_in_vsi() always derives
num_q_vectors from pf->num_lan_msix. At the same time, ethtool -L stores
the user requested channel count in vsi->req_queue_pairs and the queue
setup path uses that value for the effective number of queue pairs.

This leaves queue and vector counts out of sync after shrinking channel
count via ethtool -L. The active queue configuration is reduced, but the
VSI still keeps the full PF-sized q_vector topology.

That mismatch breaks reconfiguration flows which rely on vector/NAPI
state matching the effective channel configuration. In particular,
toggling /sys/class/net/<dev>/threaded after reducing the channel count
can hang, and later channel-count changes can fail because VSI reinit
does not rebuild q_vectors to match the new vector count.

Fix this by making the main VSI num_q_vectors follow the effective
requested channel count, capped by the available MSI-X vectors. Update
i40e_vsi_reinit_setup() to rebuild q_vectors during VSI reinit so the
vector topology is refreshed together with the ring arrays when channel
count changes.

Keep alloc_queue_pairs unchanged and based on pf->num_lan_qps so the VSI
retains its full queue capacity. Also do not touch irq_pile when
rebuilding vectors.

Selftest napi_threaded.py was originally used when Jakub reported hang
on /sys/class/net/<dev>/threaded toggle. In order to make it pass on
i40e, use persistent NAPI configuration for q_vector NAPIs so NAPI
identity and threaded settings survive q_vector reallocation across
channel-count changes. This is achieved by using netif_napi_add_config()
when configuring q_vectors.

$ export NETIF=ens259f1np1
$ sudo -E env PATH="$PATH" ./tools/testing/selftests/drivers/net/napi_threaded.py
TAP version 13
1..3
ok 1 napi_threaded.napi_init
ok 2 napi_threaded.change_num_queues
ok 3 napi_threaded.enable_dev_threaded_disable_napi_threaded
Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0

Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/intel-wired-lan/20260316133100.6054a11f@kernel.org/
Fixes: d2a69fefd756 ("i40e: Fix changing previously set num_queue_pairs for PFs")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 69 +++++++++++++--------
 1 file changed, 44 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a9ec53cfd905..8a23bd99bd12 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11406,10 +11406,14 @@ static void i40e_service_timer(struct timer_list *t)
 static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
 {
 	struct i40e_pf *pf = vsi->back;
+	u16 qps;
 
 	switch (vsi->type) {
 	case I40E_VSI_MAIN:
 		vsi->alloc_queue_pairs = pf->num_lan_qps;
+		qps = vsi->req_queue_pairs ?
+		      min(vsi->req_queue_pairs, pf->num_lan_qps) :
+		      pf->num_lan_qps;
 		if (!vsi->num_tx_desc)
 			vsi->num_tx_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
 						 I40E_REQ_DESCRIPTOR_MULTIPLE);
@@ -11417,7 +11421,7 @@ static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
 			vsi->num_rx_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
 						 I40E_REQ_DESCRIPTOR_MULTIPLE);
 		if (test_bit(I40E_FLAG_MSIX_ENA, pf->flags))
-			vsi->num_q_vectors = pf->num_lan_msix;
+			vsi->num_q_vectors = clamp(qps, 1, pf->num_lan_msix);
 		else
 			vsi->num_q_vectors = 1;
 
@@ -11469,12 +11473,11 @@ static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
 /**
  * i40e_vsi_alloc_arrays - Allocate queue and vector pointer arrays for the vsi
  * @vsi: VSI pointer
- * @alloc_qvectors: a bool to specify if q_vectors need to be allocated.
  *
  * On error: returns error code (negative)
  * On success: returns 0
  **/
-static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi, bool alloc_qvectors)
+static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi)
 {
 	struct i40e_ring **next_rings;
 	int size;
@@ -11493,19 +11496,20 @@ static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi, bool alloc_qvectors)
 	}
 	vsi->rx_rings = next_rings;
 
-	if (alloc_qvectors) {
-		/* allocate memory for q_vector pointers */
-		size = sizeof(struct i40e_q_vector *) * vsi->num_q_vectors;
-		vsi->q_vectors = kzalloc(size, GFP_KERNEL);
-		if (!vsi->q_vectors) {
-			ret = -ENOMEM;
-			goto err_vectors;
-		}
+	/* allocate memory for q_vector pointers */
+	size = sizeof(struct i40e_q_vector *) * vsi->num_q_vectors;
+	vsi->q_vectors = kzalloc(size, GFP_KERNEL);
+	if (!vsi->q_vectors) {
+		ret = -ENOMEM;
+		goto err_vectors;
 	}
 	return ret;
 
 err_vectors:
 	kfree(vsi->tx_rings);
+	vsi->tx_rings = NULL;
+	vsi->rx_rings = NULL;
+	vsi->xdp_rings = NULL;
 	return ret;
 }
 
@@ -11578,7 +11582,7 @@ static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
 	if (ret)
 		goto err_rings;
 
-	ret = i40e_vsi_alloc_arrays(vsi, true);
+	ret = i40e_vsi_alloc_arrays(vsi);
 	if (ret)
 		goto err_rings;
 
@@ -11603,18 +11607,15 @@ static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
 /**
  * i40e_vsi_free_arrays - Free queue and vector pointer arrays for the VSI
  * @vsi: VSI pointer
- * @free_qvectors: a bool to specify if q_vectors need to be freed.
  *
  * On error: returns error code (negative)
  * On success: returns 0
  **/
-static void i40e_vsi_free_arrays(struct i40e_vsi *vsi, bool free_qvectors)
+static void i40e_vsi_free_arrays(struct i40e_vsi *vsi)
 {
 	/* free the ring and vector containers */
-	if (free_qvectors) {
-		kfree(vsi->q_vectors);
-		vsi->q_vectors = NULL;
-	}
+	kfree(vsi->q_vectors);
+	vsi->q_vectors = NULL;
 	kfree(vsi->tx_rings);
 	vsi->tx_rings = NULL;
 	vsi->rx_rings = NULL;
@@ -11674,7 +11675,7 @@ static int i40e_vsi_clear(struct i40e_vsi *vsi)
 	i40e_put_lump(pf->irq_pile, vsi->base_vector, vsi->idx);
 
 	bitmap_free(vsi->af_xdp_zc_qps);
-	i40e_vsi_free_arrays(vsi, true);
+	i40e_vsi_free_arrays(vsi);
 	i40e_clear_rss_config_user(vsi);
 
 	pf->vsi[vsi->idx] = NULL;
@@ -12048,7 +12049,8 @@ static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx)
 	cpumask_copy(&q_vector->affinity_mask, cpu_possible_mask);
 
 	if (vsi->netdev)
-		netif_napi_add(vsi->netdev, &q_vector->napi, i40e_napi_poll);
+		netif_napi_add_config(vsi->netdev, &q_vector->napi,
+				      i40e_napi_poll, v_idx);
 
 	/* tie q_vector and vsi together */
 	vsi->q_vectors[v_idx] = q_vector;
@@ -14203,8 +14205,9 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
  **/
 static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 {
-	int ret = -ENOENT;
 	struct i40e_pf *pf = vsi->back;
+	bool reuse_irq_lump = false;
+	int ret = -ENOENT;
 
 	if (vsi->q_vectors[0]) {
 		dev_info(&pf->pdev->dev, "VSI %d has existing q_vectors\n",
@@ -14212,7 +14215,10 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 		return -EEXIST;
 	}
 
-	if (vsi->base_vector) {
+	if (vsi->type == I40E_VSI_MAIN && vsi->base_vector)
+		reuse_irq_lump = true;
+
+	if (vsi->base_vector && !reuse_irq_lump) {
 		dev_info(&pf->pdev->dev, "VSI %d has non-zero base vector %d\n",
 			 vsi->seid, vsi->base_vector);
 		return -EEXIST;
@@ -14232,6 +14238,10 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 	*/
 	if (!test_bit(I40E_FLAG_MSIX_ENA, pf->flags))
 		return ret;
+
+	if (reuse_irq_lump)
+		return ret;
+
 	if (vsi->num_q_vectors)
 		vsi->base_vector = i40e_get_lump(pf, pf->irq_pile,
 						 vsi->num_q_vectors, vsi->idx);
@@ -14271,11 +14281,20 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi,
 	pf = vsi->back;
 
 	i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
+	i40e_vsi_free_q_vectors(vsi);
 	i40e_vsi_clear_rings(vsi);
+	i40e_vsi_free_arrays(vsi);
 
-	i40e_vsi_free_arrays(vsi, false);
 	i40e_set_num_rings_in_vsi(vsi);
-	ret = i40e_vsi_alloc_arrays(vsi, false);
+	ret = i40e_vsi_alloc_arrays(vsi);
+	if (ret)
+		goto err_netdev;
+
+	/* Rebuild q_vectors during VSI reinit because the effective channel
+	 * count may change num_q_vectors. Keep vector topology aligned with the
+	 * queue configuration after ethtool's .set_channels() callback.
+	 */
+	ret = i40e_vsi_setup_vectors(vsi);
 	if (ret)
 		goto err_netdev;
 
@@ -14287,7 +14306,7 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi,
 		dev_info(&pf->pdev->dev,
 			 "failed to get tracking for %d queues for VSI %d err %d\n",
 			 alloc_queue_pairs, vsi->seid, ret);
-		goto err_netdev;
+		goto err_rings;
 	}
 	vsi->base_queue = ret;
 
-- 
2.43.0

Re: [PATCH v5 net 0/7] i40e: re-init and UAF fixes

[Paolo Abeni]

On 7/1/26 2:45 PM, Maciej Fijalkowski wrote:
> v5:
> - include three new patches to address last Sashiko review
>   *
> - do not release the irq lump in rebuild path in patch 7
> - clear dangling pointers from rx and xdp rings arrays
> v4:
> - add preceding patch that fixes a case when some of re-init allocations
>   failed and we missed de-registering netdev at failure path
> - pull out i40e_vsi_setup() changes onto separate patch
> v3:
> - address UAF when ring arrays were freed before q_vector's ring
>   containers (Sashiko, Jacob)
> - remove bool params from alloc/free array routines (Simon)
> v2:
> - NULL vsi->tx_rings in i40e_vsi_alloc_arrays() (Sashiko)

FTR, I'm not 100% sure about the actual target here: the subj prefix
point to the net tree, but the to recipient is IWL.

Since this is not sent by Tony, I assume the real target is IWL and
tentatively set the series to 'Awaiting upstream'. Note that for 'net'
inclusion you will need an actual, not empty, cover letter.

/P

Re: [Intel-wired-lan] [PATCH v5 net 0/7] i40e: re-init and UAF fixes

[Paolo Abeni]

On 7/1/26 2:45 PM, Maciej Fijalkowski wrote:
> v5:
> - include three new patches to address last Sashiko review
>   *
> - do not release the irq lump in rebuild path in patch 7
> - clear dangling pointers from rx and xdp rings arrays
> v4:
> - add preceding patch that fixes a case when some of re-init allocations
>   failed and we missed de-registering netdev at failure path
> - pull out i40e_vsi_setup() changes onto separate patch
> v3:
> - address UAF when ring arrays were freed before q_vector's ring
>   containers (Sashiko, Jacob)
> - remove bool params from alloc/free array routines (Simon)
> v2:
> - NULL vsi->tx_rings in i40e_vsi_alloc_arrays() (Sashiko)

FTR, I'm not 100% sure about the actual target here: the subj prefix
point to the net tree, but the to recipient is IWL.

Since this is not sent by Tony, I assume the real target is IWL and
tentatively set the series to 'Awaiting upstream'. Note that for 'net'
inclusion you will need an actual, not empty, cover letter.

/P

Re: [PATCH v5 net 0/7] i40e: re-init and UAF fixes

[Maciej Fijalkowski]

On Wed, Jul 08, 2026 at 10:51:54AM +0200, Paolo Abeni wrote:
> On 7/1/26 2:45 PM, Maciej Fijalkowski wrote:
> > v5:
> > - include three new patches to address last Sashiko review
> >   *
> > - do not release the irq lump in rebuild path in patch 7
> > - clear dangling pointers from rx and xdp rings arrays
> > v4:
> > - add preceding patch that fixes a case when some of re-init allocations
> >   failed and we missed de-registering netdev at failure path
> > - pull out i40e_vsi_setup() changes onto separate patch
> > v3:
> > - address UAF when ring arrays were freed before q_vector's ring
> >   containers (Sashiko, Jacob)
> > - remove bool params from alloc/free array routines (Simon)
> > v2:
> > - NULL vsi->tx_rings in i40e_vsi_alloc_arrays() (Sashiko)
> 
> FTR, I'm not 100% sure about the actual target here: the subj prefix
> point to the net tree, but the to recipient is IWL.
> 
> Since this is not sent by Tony, I assume the real target is IWL and
> tentatively set the series to 'Awaiting upstream'. Note that for 'net'
> inclusion you will need an actual, not empty, cover letter.

Yeah should be iwl-net. I assume excitement of satisfying sashiko (sorta)
took over and i messed up target tree.

It's driver-only set so to follow process it should go via Tony...HOWEVER
I am fed up with these changes and the faster they would be accepted the
better for my mental health. But that's a irrelevant side-note.

> 
> /P
> 

Re: [Intel-wired-lan] [PATCH v5 net 0/7] i40e: re-init and UAF fixes

[Maciej Fijalkowski]

On Wed, Jul 08, 2026 at 10:51:54AM +0200, Paolo Abeni wrote:
> On 7/1/26 2:45 PM, Maciej Fijalkowski wrote:
> > v5:
> > - include three new patches to address last Sashiko review
> >   *
> > - do not release the irq lump in rebuild path in patch 7
> > - clear dangling pointers from rx and xdp rings arrays
> > v4:
> > - add preceding patch that fixes a case when some of re-init allocations
> >   failed and we missed de-registering netdev at failure path
> > - pull out i40e_vsi_setup() changes onto separate patch
> > v3:
> > - address UAF when ring arrays were freed before q_vector's ring
> >   containers (Sashiko, Jacob)
> > - remove bool params from alloc/free array routines (Simon)
> > v2:
> > - NULL vsi->tx_rings in i40e_vsi_alloc_arrays() (Sashiko)
> 
> FTR, I'm not 100% sure about the actual target here: the subj prefix
> point to the net tree, but the to recipient is IWL.
> 
> Since this is not sent by Tony, I assume the real target is IWL and
> tentatively set the series to 'Awaiting upstream'. Note that for 'net'
> inclusion you will need an actual, not empty, cover letter.

Yeah should be iwl-net. I assume excitement of satisfying sashiko (sorta)
took over and i messed up target tree.

It's driver-only set so to follow process it should go via Tony...HOWEVER
I am fed up with these changes and the faster they would be accepted the
better for my mental health. But that's a irrelevant side-note.

> 
> /P
>