From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Igor Paunovic <royalnet026@gmail.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, kernel@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 1/4] dt-bindings: media: snps,dw-hdmi-rx: add #sound-dai-cells
Date: Tue, 21 Jul 2026 17:13:18 +0200 [thread overview]
Message-ID: <al-MajLSsTj0oPe5@venus> (raw)
In-Reply-To: <20260721064115.64809-2-royalnet026@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2387 bytes --]
Hi,
On Tue, Jul 21, 2026 at 08:41:12AM +0200, Igor Paunovic wrote:
> The HDMI RX controller can expose the audio embedded in the incoming
> HDMI stream as an ALSA capture device. Document the #sound-dai-cells
> property so that a sound card can reference the HDMI RX audio DAI.
>
> Signed-off-by: Igor Paunovic <royalnet026@gmail.com>
> ---
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-- Sebastian
> Changes in v4 (both suggested by Krzysztof Kozlowski):
> - reference dai-common.yaml and switch additionalProperties to
> unevaluatedProperties: false
> - drop the consumer comment from the binding example
>
> Changes in v3:
> - no changes
>
> Changes in v2 (all suggested by Sebastian Reichel):
> - reworded the commit message to describe the hardware
> - property description now documents the DAI indexes (0 = I2S,
> 1 = S/PDIF)
> - moved the consumer reference into the binding example
> .../devicetree/bindings/media/snps,dw-hdmi-rx.yaml | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> index b7f6c87..b80660d 100644
> --- a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> +++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> @@ -78,6 +78,13 @@ properties:
> The phandle of the syscon node for the Video Output GRF register
> to enable EDID transfer through SDAIN and SCLIN.
>
> + "#sound-dai-cells":
> + const: 1
> + description:
> + The HDMI RX controller has two digital audio interfaces, one for
> + I2S and one for S/PDIF. The DAI cell selects the interface, 0 for
> + I2S and 1 for S/PDIF.
> +
> required:
> - compatible
> - reg
> @@ -90,7 +97,10 @@ required:
> - pinctrl-0
> - hpd-gpios
>
> -additionalProperties: false
> +allOf:
> + - $ref: /schemas/sound/dai-common.yaml#
> +
> +unevaluatedProperties: false
>
> examples:
> - |
> @@ -129,4 +139,5 @@ examples:
> pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_5v_detection>;
> pinctrl-names = "default";
> hpd-gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
> + #sound-dai-cells = <1>;
> };
> --
> 2.53.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Igor Paunovic <royalnet026@gmail.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, kernel@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 1/4] dt-bindings: media: snps,dw-hdmi-rx: add #sound-dai-cells
Date: Tue, 21 Jul 2026 17:13:18 +0200 [thread overview]
Message-ID: <al-MajLSsTj0oPe5@venus> (raw)
In-Reply-To: <20260721064115.64809-2-royalnet026@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 2387 bytes --]
Hi,
On Tue, Jul 21, 2026 at 08:41:12AM +0200, Igor Paunovic wrote:
> The HDMI RX controller can expose the audio embedded in the incoming
> HDMI stream as an ALSA capture device. Document the #sound-dai-cells
> property so that a sound card can reference the HDMI RX audio DAI.
>
> Signed-off-by: Igor Paunovic <royalnet026@gmail.com>
> ---
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-- Sebastian
> Changes in v4 (both suggested by Krzysztof Kozlowski):
> - reference dai-common.yaml and switch additionalProperties to
> unevaluatedProperties: false
> - drop the consumer comment from the binding example
>
> Changes in v3:
> - no changes
>
> Changes in v2 (all suggested by Sebastian Reichel):
> - reworded the commit message to describe the hardware
> - property description now documents the DAI indexes (0 = I2S,
> 1 = S/PDIF)
> - moved the consumer reference into the binding example
> .../devicetree/bindings/media/snps,dw-hdmi-rx.yaml | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> index b7f6c87..b80660d 100644
> --- a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> +++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> @@ -78,6 +78,13 @@ properties:
> The phandle of the syscon node for the Video Output GRF register
> to enable EDID transfer through SDAIN and SCLIN.
>
> + "#sound-dai-cells":
> + const: 1
> + description:
> + The HDMI RX controller has two digital audio interfaces, one for
> + I2S and one for S/PDIF. The DAI cell selects the interface, 0 for
> + I2S and 1 for S/PDIF.
> +
> required:
> - compatible
> - reg
> @@ -90,7 +97,10 @@ required:
> - pinctrl-0
> - hpd-gpios
>
> -additionalProperties: false
> +allOf:
> + - $ref: /schemas/sound/dai-common.yaml#
> +
> +unevaluatedProperties: false
>
> examples:
> - |
> @@ -129,4 +139,5 @@ examples:
> pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_5v_detection>;
> pinctrl-names = "default";
> hpd-gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
> + #sound-dai-cells = <1>;
> };
> --
> 2.53.0
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2026-07-21 15:13 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 6:41 [PATCH v4 0/4] media: synopsys: hdmirx: add HDMI audio capture support Igor Paunovic
2026-07-21 6:41 ` Igor Paunovic
2026-07-21 6:41 ` [PATCH v4 1/4] dt-bindings: media: snps,dw-hdmi-rx: add #sound-dai-cells Igor Paunovic
2026-07-21 6:41 ` Igor Paunovic
2026-07-21 15:13 ` Sebastian Reichel [this message]
2026-07-21 15:13 ` Sebastian Reichel
2026-07-21 6:41 ` [PATCH v4 2/4] media: synopsys: hdmirx: add HDMI audio capture support Igor Paunovic
2026-07-21 6:41 ` Igor Paunovic
2026-07-21 7:00 ` sashiko-bot
2026-07-21 7:51 ` Igor Paunovic
2026-07-21 7:51 ` Igor Paunovic
2026-07-21 6:41 ` [PATCH v4 3/4] arm64: dts: rockchip: add HDMI RX audio on RK3588 Igor Paunovic
2026-07-21 6:41 ` Igor Paunovic
2026-07-21 6:54 ` sashiko-bot
2026-07-21 15:13 ` Sebastian Reichel
2026-07-21 15:13 ` Sebastian Reichel
2026-07-21 6:41 ` [PATCH v4 4/4] arm64: dts: rockchip: enable HDMI RX audio capture on Orange Pi 5 Plus Igor Paunovic
2026-07-21 6:41 ` Igor Paunovic
2026-07-21 15:15 ` Sebastian Reichel
2026-07-21 15:15 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=al-MajLSsTj0oPe5@venus \
--to=sebastian.reichel@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.osipenko@collabora.com \
--cc=heiko@sntech.de \
--cc=kernel@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=royalnet026@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.