From: Frank Li <Frank.li@oss.nxp.com>
To: Xu Yang <xu.yang_2@oss.nxp.com>
Cc: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Jun Li <jun.li@nxp.com>,
linux-phy@lists.infradead.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Xu Yang <xu.yang_2@nxp.com>
Subject: Re: [PATCH v6 5/6] phy: fsl-imx8mq-usb: introduce per-variant driver data structure
Date: Wed, 15 Jul 2026 10:29:19 -0500 [thread overview]
Message-ID: <alenTyMiIqxEycPK@SMW015318> (raw)
In-Reply-To: <20260715-imx8mp-usb-phy-improvement-v6-5-00d95e270e4c@nxp.com>
On Wed, Jul 15, 2026 at 07:34:00PM +0800, Xu Yang wrote:
> From: Xu Yang <xu.yang_2@nxp.com>
>
> Replace direct use of phy_ops pointer in of_device_id .data with a
> dedicated imx8mq_usb_phy_drvdata structure. This allows per-variant
> driver data to be extended in the future without changing the match
> table.
>
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
>
> ---
> Changes in v6:
> - new patch
> ---
> drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 29 ++++++++++++++++++++++-------
> 1 file changed, 22 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> index 79b3958ead2f..f0bdfa75d586 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> @@ -132,6 +132,9 @@ struct imx8mq_usb_phy {
> u32 comp_dis_tune;
> };
>
> +struct imx8mq_usb_phy_drvdata {
> + const struct phy_ops *ops;
> +};
>
> static void tca_blk_orientation_set(struct tca_blk *tca,
> enum typec_orientation orientation);
> @@ -660,13 +663,25 @@ static const struct phy_ops imx8mp_usb_phy_ops = {
> .owner = THIS_MODULE,
> };
>
> +static const struct imx8mq_usb_phy_drvdata imx8mq_usb_phy_data = {
> + .ops = &imx8mq_usb_phy_ops,
> +};
> +
> +static const struct imx8mq_usb_phy_drvdata imx8mp_usb_phy_data = {
> + .ops = &imx8mp_usb_phy_ops,
> +};
> +
> +static const struct imx8mq_usb_phy_drvdata imx95_usb_phy_data = {
> + .ops = &imx8mp_usb_phy_ops,
> +};
> +
> static const struct of_device_id imx8mq_usb_phy_of_match[] = {
> {.compatible = "fsl,imx8mq-usb-phy",
> - .data = &imx8mq_usb_phy_ops,},
> + .data = &imx8mq_usb_phy_data,},
> {.compatible = "fsl,imx8mp-usb-phy",
> - .data = &imx8mp_usb_phy_ops,},
> + .data = &imx8mp_usb_phy_data,},
> {.compatible = "fsl,imx95-usb-phy",
> - .data = &imx8mp_usb_phy_ops,},
> + .data = &imx95_usb_phy_data,},
> { }
> };
> MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
> @@ -684,7 +699,7 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
> struct phy_provider *phy_provider;
> struct device *dev = &pdev->dev;
> struct imx8mq_usb_phy *imx_phy;
> - const struct phy_ops *phy_ops;
> + const struct imx8mq_usb_phy_drvdata *phy_data;
> int ret;
>
> imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
> @@ -720,11 +735,11 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
> if (ret)
> return dev_err_probe(dev, ret, "failed to enable runtime PM\n");
>
> - phy_ops = of_device_get_match_data(dev);
> - if (!phy_ops)
> + phy_data = of_device_get_match_data(dev);
> + if (!phy_data)
> return -EINVAL;
>
> - imx_phy->phy = devm_phy_create(dev, NULL, phy_ops);
> + imx_phy->phy = devm_phy_create(dev, NULL, phy_data->ops);
> if (IS_ERR(imx_phy->phy))
> return PTR_ERR(imx_phy->phy);
>
>
> --
> 2.34.1
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Frank Li <Frank.li@oss.nxp.com>
To: Xu Yang <xu.yang_2@oss.nxp.com>
Cc: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Jun Li <jun.li@nxp.com>,
linux-phy@lists.infradead.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Xu Yang <xu.yang_2@nxp.com>
Subject: Re: [PATCH v6 5/6] phy: fsl-imx8mq-usb: introduce per-variant driver data structure
Date: Wed, 15 Jul 2026 10:29:19 -0500 [thread overview]
Message-ID: <alenTyMiIqxEycPK@SMW015318> (raw)
In-Reply-To: <20260715-imx8mp-usb-phy-improvement-v6-5-00d95e270e4c@nxp.com>
On Wed, Jul 15, 2026 at 07:34:00PM +0800, Xu Yang wrote:
> From: Xu Yang <xu.yang_2@nxp.com>
>
> Replace direct use of phy_ops pointer in of_device_id .data with a
> dedicated imx8mq_usb_phy_drvdata structure. This allows per-variant
> driver data to be extended in the future without changing the match
> table.
>
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
>
> ---
> Changes in v6:
> - new patch
> ---
> drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 29 ++++++++++++++++++++++-------
> 1 file changed, 22 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> index 79b3958ead2f..f0bdfa75d586 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> @@ -132,6 +132,9 @@ struct imx8mq_usb_phy {
> u32 comp_dis_tune;
> };
>
> +struct imx8mq_usb_phy_drvdata {
> + const struct phy_ops *ops;
> +};
>
> static void tca_blk_orientation_set(struct tca_blk *tca,
> enum typec_orientation orientation);
> @@ -660,13 +663,25 @@ static const struct phy_ops imx8mp_usb_phy_ops = {
> .owner = THIS_MODULE,
> };
>
> +static const struct imx8mq_usb_phy_drvdata imx8mq_usb_phy_data = {
> + .ops = &imx8mq_usb_phy_ops,
> +};
> +
> +static const struct imx8mq_usb_phy_drvdata imx8mp_usb_phy_data = {
> + .ops = &imx8mp_usb_phy_ops,
> +};
> +
> +static const struct imx8mq_usb_phy_drvdata imx95_usb_phy_data = {
> + .ops = &imx8mp_usb_phy_ops,
> +};
> +
> static const struct of_device_id imx8mq_usb_phy_of_match[] = {
> {.compatible = "fsl,imx8mq-usb-phy",
> - .data = &imx8mq_usb_phy_ops,},
> + .data = &imx8mq_usb_phy_data,},
> {.compatible = "fsl,imx8mp-usb-phy",
> - .data = &imx8mp_usb_phy_ops,},
> + .data = &imx8mp_usb_phy_data,},
> {.compatible = "fsl,imx95-usb-phy",
> - .data = &imx8mp_usb_phy_ops,},
> + .data = &imx95_usb_phy_data,},
> { }
> };
> MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
> @@ -684,7 +699,7 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
> struct phy_provider *phy_provider;
> struct device *dev = &pdev->dev;
> struct imx8mq_usb_phy *imx_phy;
> - const struct phy_ops *phy_ops;
> + const struct imx8mq_usb_phy_drvdata *phy_data;
> int ret;
>
> imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
> @@ -720,11 +735,11 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
> if (ret)
> return dev_err_probe(dev, ret, "failed to enable runtime PM\n");
>
> - phy_ops = of_device_get_match_data(dev);
> - if (!phy_ops)
> + phy_data = of_device_get_match_data(dev);
> + if (!phy_data)
> return -EINVAL;
>
> - imx_phy->phy = devm_phy_create(dev, NULL, phy_ops);
> + imx_phy->phy = devm_phy_create(dev, NULL, phy_data->ops);
> if (IS_ERR(imx_phy->phy))
> return PTR_ERR(imx_phy->phy);
>
>
> --
> 2.34.1
>
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2026-07-15 15:29 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-15 11:33 [PATCH v6 0/6] phy: fsl-imx8mq-usb: few improvements Xu Yang
2026-07-15 11:33 ` Xu Yang
2026-07-15 11:33 ` [PATCH v6 1/6] phy: fsl-imx8mq-usb: fix typec switch leak on probe error path Xu Yang
2026-07-15 11:33 ` Xu Yang
2026-07-15 11:46 ` sashiko-bot
2026-07-15 11:46 ` sashiko-bot
2026-07-15 11:33 ` [PATCH v6 2/6] phy: fsl-imx8mq-usb: set usb phy to be wakeup capable Xu Yang
2026-07-15 11:33 ` Xu Yang
2026-07-15 11:33 ` [PATCH v6 3/6] phy: fsl-imx8mq-usb: add runtime PM support Xu Yang
2026-07-15 11:33 ` Xu Yang
2026-07-15 11:52 ` sashiko-bot
2026-07-15 11:52 ` sashiko-bot
2026-07-15 15:28 ` Frank Li
2026-07-15 15:28 ` Frank Li
2026-07-15 11:33 ` [PATCH v6 4/6] phy: fsl-imx8mq-usb: add control register regmap Xu Yang
2026-07-15 11:33 ` Xu Yang
2026-07-15 11:34 ` [PATCH v6 5/6] phy: fsl-imx8mq-usb: introduce per-variant driver data structure Xu Yang
2026-07-15 11:34 ` Xu Yang
2026-07-15 15:29 ` Frank Li [this message]
2026-07-15 15:29 ` Frank Li
2026-07-15 11:34 ` [PATCH v6 6/6] phy: fsl-imx8mq-usb: keep PHY power domain runtime always-on for i.MX8MP Xu Yang
2026-07-15 11:34 ` Xu Yang
2026-07-15 11:44 ` sashiko-bot
2026-07-15 11:44 ` sashiko-bot
2026-07-15 15:32 ` Frank Li
2026-07-15 15:32 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alenTyMiIqxEycPK@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=neil.armstrong@linaro.org \
--cc=s.hauer@pengutronix.de \
--cc=vkoul@kernel.org \
--cc=xu.yang_2@nxp.com \
--cc=xu.yang_2@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.