[U-Boot] [PATCH] README: Add an example of adding a new board (BeagleBoard).

[U-Boot] [PATCH] README: Add an example of adding a new board (BeagleBoard).

[Robert P. J. Day]

Show the simple end result of adding an example board (BeagleBoard).

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

---

  based on dirk's earlier email, i'm emphasizing that this represents
only the *end result* of adding BeagleBoard support to U-Boot.
anything more involved than that wouldn't really belong in the README.

diff --git a/README b/README
index 2c77687..3e5bb69 100644
--- a/README
+++ b/README
@@ -2874,6 +2874,75 @@ steps:
     [Of course, this last step is much harder than it sounds.]


+A real-life example of adding a new board
+=========================================
+
+  As a working example of the end result of adding a new board,
+here's a list of files and directories that were added/changed to
+support the OMAP3-based BeagleBoard.  Note that these changes don't
+represent *how* this board was added, they represent only the
+end result.
+
+  First, the new BeagleBoard-related files:
+
+  ./board/ti/beagle/
+      beagle.c
+      beagle.h
+      config.mk
+      Makefile
+  ./include/configs/omap3_beagle.h
+
+Followed by eventual changes to some existing files:
+
+	Makefile
+	========
+
+  omap3_beagle_config :   unconfig
+        @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
+
+	MAKEALL
+	=======
+
+  LIST_ARM_CORTEX_A8="          \
+        devkit8000              \
+        omap3_beagle            \
+        omap3_overo             \
+        ...
+
+	include/asm-arm/types.h
+	=======================
+
+  #ifdef CONFIG_MACH_OMAP3_BEAGLE
+  # ifdef machine_arch_type
+  #  undef machine_arch_type
+  #  define machine_arch_type     __machine_arch_type
+  # else
+  #  define machine_arch_type     MACH_TYPE_OMAP3_BEAGLE
+  # endif
+  # define machine_is_omap3_beagle() (machine_arch_type == MACH_TYPE_OMAP3_BEAGLE)
+  #else
+  # define machine_is_omap3_beagle()      (0)
+  #endif
+
+	doc/README.omap3
+	================
+
+  Build
+  =====
+
+  * BeagleBoard:
+
+  make omap3_beagle_config
+  make
+
+	MAINTAINERS
+	===========
+
+  Dirk Behme <dirk.behme@gmail.com>
+
+        omap3_beagle    ARM CORTEX-A8 (OMAP3530 SoC)
+
+
 Testing of U-Boot Modifications, Ports to New Hardware, etc.:
 ==============================================================

rday
--

========================================================================
Robert P. J. Day                               Waterloo, Ontario, CANADA

            Linux Consulting, Training and Kernel Pedantry.

Web page:                                          http://crashcourse.ca
Twitter:                                       http://twitter.com/rpjday
========================================================================

[U-Boot] [PATCH] README: Add an example of adding a new board (BeagleBoard).

[Wolfgang Denk]

Dear "Robert P. J. Day",

In message <alpine.LFD.2.00.0911170641240.27372@localhost> you wrote:
> 
> Show the simple end result of adding an example board (BeagleBoard).
> 
> Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

What is this? An unchanged repost of the earlier patch?

I cannot see  any  indication  that  this  might  be  a  new  version
(something  like  "[PATCH  v2]" in the Subject: line), nor can I find
any indication of what might have been changed against  the  previous
mailing (like a change log below the "---" line).


Considered a dupe and ignored.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The great question... which I have not been able  to  answer...  is,
`What does woman want?'"                              - Sigmund Freud