* which drivers subdirs should be automatically selected?
@ 2009-12-22 15:02 Robert P. J. Day
2009-12-22 15:23 ` Robert Schwebel
2009-12-23 9:06 ` Sascha Hauer
0 siblings, 2 replies; 6+ messages in thread
From: Robert P. J. Day @ 2009-12-22 15:02 UTC (permalink / raw)
To: U-Boot Version 2 (barebox)
drivers/Makefile:
obj-y += net/
obj-y += serial/
obj-y += nand/
obj-y += nor/
obj-y += usb/
obj-$(CONFIG_SPI) += spi/
obj-$(CONFIG_I2C) += i2c/
obj-$(CONFIG_VIDEO) += video/
is there a fundamental reason that some of those subdirs are
auto-selected, while others are based on a CONFIG variable? asked
another way, are there some driver subdirs that are so fundamentally
required that they *should* be auto-selected, or should *everything*
be a user-selectable choice? the above just seems slightly
inconsistent and non-obvious.
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Kernel Pedantry.
Web page: http://crashcourse.ca
Twitter: http://twitter.com/rpjday
========================================================================
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: which drivers subdirs should be automatically selected?
2009-12-22 15:02 which drivers subdirs should be automatically selected? Robert P. J. Day
@ 2009-12-22 15:23 ` Robert Schwebel
2009-12-22 15:30 ` Robert P. J. Day
2009-12-23 9:06 ` Sascha Hauer
1 sibling, 1 reply; 6+ messages in thread
From: Robert Schwebel @ 2009-12-22 15:23 UTC (permalink / raw)
To: Robert P. J. Day; +Cc: U-Boot Version 2 (barebox)
On Tue, Dec 22, 2009 at 10:02:40AM -0500, Robert P. J. Day wrote:
> drivers/Makefile:
>
> obj-y += net/
> obj-y += serial/
> obj-y += nand/
> obj-y += nor/
> obj-y += usb/
> obj-$(CONFIG_SPI) += spi/
> obj-$(CONFIG_I2C) += i2c/
> obj-$(CONFIG_VIDEO) += video/
>
>
> is there a fundamental reason that some of those subdirs are
> auto-selected, while others are based on a CONFIG variable? asked
> another way, are there some driver subdirs that are so fundamentally
> required that they *should* be auto-selected, or should *everything*
> be a user-selectable choice? the above just seems slightly
> inconsistent and non-obvious.
They should be selectable.
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: which drivers subdirs should be automatically selected?
2009-12-22 15:23 ` Robert Schwebel
@ 2009-12-22 15:30 ` Robert P. J. Day
0 siblings, 0 replies; 6+ messages in thread
From: Robert P. J. Day @ 2009-12-22 15:30 UTC (permalink / raw)
To: Robert Schwebel; +Cc: U-Boot Version 2 (barebox)
On Tue, 22 Dec 2009, Robert Schwebel wrote:
> On Tue, Dec 22, 2009 at 10:02:40AM -0500, Robert P. J. Day wrote:
> > drivers/Makefile:
> >
> > obj-y += net/
> > obj-y += serial/
> > obj-y += nand/
> > obj-y += nor/
> > obj-y += usb/
> > obj-$(CONFIG_SPI) += spi/
> > obj-$(CONFIG_I2C) += i2c/
> > obj-$(CONFIG_VIDEO) += video/
> >
> >
> > is there a fundamental reason that some of those subdirs are
> > auto-selected, while others are based on a CONFIG variable?
> > asked another way, are there some driver subdirs that are so
> > fundamentally required that they *should* be auto-selected, or
> > should *everything* be a user-selectable choice? the above just
> > seems slightly inconsistent and non-obvious.
>
> They should be selectable.
i thought as much. perhaps i'll start with that smaller fix and
work my way up if i can make that change in isolation to start with.
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Kernel Pedantry.
Web page: http://crashcourse.ca
Twitter: http://twitter.com/rpjday
========================================================================
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: which drivers subdirs should be automatically selected?
2009-12-22 15:02 which drivers subdirs should be automatically selected? Robert P. J. Day
2009-12-22 15:23 ` Robert Schwebel
@ 2009-12-23 9:06 ` Sascha Hauer
2009-12-23 9:11 ` Robert Schwebel
2009-12-23 9:19 ` Robert P. J. Day
1 sibling, 2 replies; 6+ messages in thread
From: Sascha Hauer @ 2009-12-23 9:06 UTC (permalink / raw)
To: Robert P. J. Day; +Cc: U-Boot Version 2 (barebox)
On Tue, Dec 22, 2009 at 10:02:40AM -0500, Robert P. J. Day wrote:
>
> drivers/Makefile:
>
> obj-y += net/
> obj-y += serial/
> obj-y += nand/
> obj-y += nor/
> obj-y += usb/
> obj-$(CONFIG_SPI) += spi/
> obj-$(CONFIG_I2C) += i2c/
> obj-$(CONFIG_VIDEO) += video/
>
>
> is there a fundamental reason that some of those subdirs are
> auto-selected, while others are based on a CONFIG variable? asked
> another way, are there some driver subdirs that are so fundamentally
> required that they *should* be auto-selected, or should *everything*
> be a user-selectable choice? the above just seems slightly
> inconsistent and non-obvious.
Nothing of the above is really fundamental. Without serial drivers you
won't see anything of course, but this won't stop barebox from working.
I think this only reflects a change of taste during time and should be
done consistently so that other people know how to do it. Prefered is
the obj-$(CONFIG_SPI) += spi/ style.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: which drivers subdirs should be automatically selected?
2009-12-23 9:06 ` Sascha Hauer
@ 2009-12-23 9:11 ` Robert Schwebel
2009-12-23 9:19 ` Robert P. J. Day
1 sibling, 0 replies; 6+ messages in thread
From: Robert Schwebel @ 2009-12-23 9:11 UTC (permalink / raw)
To: Sascha Hauer; +Cc: U-Boot Version 2 (barebox)
On Wed, Dec 23, 2009 at 10:06:39AM +0100, Sascha Hauer wrote:
> Nothing of the above is really fundamental. Without serial drivers you
> won't see anything of course, but this won't stop barebox from working.
> I think this only reflects a change of taste during time and should be
> done consistently so that other people know how to do it. Prefered is
> the obj-$(CONFIG_SPI) += spi/ style.
It's also good in the "how small can we make it" game.
rsc
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: which drivers subdirs should be automatically selected?
2009-12-23 9:06 ` Sascha Hauer
2009-12-23 9:11 ` Robert Schwebel
@ 2009-12-23 9:19 ` Robert P. J. Day
1 sibling, 0 replies; 6+ messages in thread
From: Robert P. J. Day @ 2009-12-23 9:19 UTC (permalink / raw)
To: Sascha Hauer; +Cc: U-Boot Version 2 (barebox)
On Wed, 23 Dec 2009, Sascha Hauer wrote:
> On Tue, Dec 22, 2009 at 10:02:40AM -0500, Robert P. J. Day wrote:
> >
> > drivers/Makefile:
> >
> > obj-y += net/
> > obj-y += serial/
> > obj-y += nand/
> > obj-y += nor/
> > obj-y += usb/
> > obj-$(CONFIG_SPI) += spi/
> > obj-$(CONFIG_I2C) += i2c/
> > obj-$(CONFIG_VIDEO) += video/
> >
> >
> > is there a fundamental reason that some of those subdirs are
> > auto-selected, while others are based on a CONFIG variable?
> > asked another way, are there some driver subdirs that are so
> > fundamentally required that they *should* be auto-selected, or
> > should *everything* be a user-selectable choice? the above just
> > seems slightly inconsistent and non-obvious.
>
> Nothing of the above is really fundamental. Without serial drivers
> you won't see anything of course, but this won't stop barebox from
> working. I think this only reflects a change of taste during time
> and should be done consistently so that other people know how to do
> it. Prefered is the obj-$(CONFIG_SPI) += spi/ style.
fair enough, i can take a shot at that. stuff that's really basic
(like serial) can simply be marked as "default y" so you'd have to
explicitly *exclude* it in unusual cases.
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Kernel Pedantry.
Web page: http://crashcourse.ca
Twitter: http://twitter.com/rpjday
========================================================================
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-12-23 9:20 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-22 15:02 which drivers subdirs should be automatically selected? Robert P. J. Day
2009-12-22 15:23 ` Robert Schwebel
2009-12-22 15:30 ` Robert P. J. Day
2009-12-23 9:06 ` Sascha Hauer
2009-12-23 9:11 ` Robert Schwebel
2009-12-23 9:19 ` Robert P. J. Day
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.