is there any sort of support for (old) MPC8360(e)?

is there any sort of support for (old) MPC8360(e)?

[Robert P. J. Day]

  some colleagues are looking to port linux to some fairly old
hardware based on one of MPC8360, MPC8360e or MPC8280.  i know little
about powerpc, other than those procesors are pretty old and i would
be surprised if there was any decent support for them these days.

  is there anything out there in the way of either OE/yocto support,
or even cheap dev kits based on those one could get to play on? i'm
guessing not, but i'm willing to be surprised.

rday

-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================

Re: is there any sort of support for (old) MPC8360(e)?

[Luo Zhenhua]

MPC8360 is never supported by FSL QorIQ SDKs which are based on Yocto. You can find non-Yocto BSPs of mpc8536 from http://www.freescale.com/products/power-architecture-processors/powerquicc-processors/powerquicc-iii-85xx/mpc8536e-communications-processors:MPC8536E?fpsp=1&tab=Design_Tools_Tab.

FYI, the mpc8536ds, mpc8544ds, mpc8548cds and mpc8572ds were supported by several previous FSL Yocto SDKs. 
http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/tree/conf/machine?h=edison
http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/tree/conf/machine?h=denzil
http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/tree/conf/machine?h=danny


Best Regards,

Zhenhua

> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Robert P. J. Day
> Sent: Friday, November 20, 2015 8:49 PM
> To: meta-freescale@yoctoproject.org
> Subject: [meta-freescale] is there any sort of support for (old) MPC8360(e)?
> 
> 
>   some colleagues are looking to port linux to some fairly old hardware based on
> one of MPC8360, MPC8360e or MPC8280.  i know little about powerpc, other
> than those procesors are pretty old and i would be surprised if there was any
> decent support for them these days.
> 
>   is there anything out there in the way of either OE/yocto support, or even
> cheap dev kits based on those one could get to play on? i'm guessing not, but
> i'm willing to be surprised.
> 
> rday
> 
> --
> 
> ============================================================
> ============
> Robert P. J. Day                                 Ottawa, Ontario, CANADA
>                         http://crashcourse.ca
> 
> Twitter:                                       http://twitter.com/rpjday
> LinkedIn:                               http://ca.linkedin.com/in/rpjday
> ============================================================
> ============
> 
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale

Re: is there any sort of support for (old) MPC8360(e)?

[Luo Zhenhua]

Correct the official website of MPC8360E BSP. 

http://www.freescale.com/products/power-architecture-processors/powerquicc-processors/powerquicc-ii-pro-83xx/powerquicc-ii-pro-processor-with-ddr2-tdm-pci-security-usb-quicc-engine-with-1-gb-ethernet-utopia:MPC8360E?fpsp=1&tab=Design_Tools_Tab


Best Regards,

Zhenhua

> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Luo Zhenhua
> Sent: Monday, November 23, 2015 11:19 AM
> To: Robert P. J. Day <rpjday@crashcourse.ca>
> Cc: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] is there any sort of support for (old) MPC8360(e)?
> 
> MPC8360 is never supported by FSL QorIQ SDKs which are based on Yocto. You
> can find non-Yocto BSPs of mpc8536 from
> http://www.freescale.com/products/power-architecture-
> processors/powerquicc-processors/powerquicc-iii-85xx/mpc8536e-
> communications-processors:MPC8536E?fpsp=1&tab=Design_Tools_Tab.
> 
> FYI, the mpc8536ds, mpc8544ds, mpc8548cds and mpc8572ds were supported
> by several previous FSL Yocto SDKs.
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-
> ppc/tree/conf/machine?h=edison
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-
> ppc/tree/conf/machine?h=denzil
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-
> ppc/tree/conf/machine?h=danny
> 
> 
> Best Regards,
> 
> Zhenhua
> 
> > -----Original Message-----
> > From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> > bounces@yoctoproject.org] On Behalf Of Robert P. J. Day
> > Sent: Friday, November 20, 2015 8:49 PM
> > To: meta-freescale@yoctoproject.org
> > Subject: [meta-freescale] is there any sort of support for (old) MPC8360(e)?
> >
> >
> >   some colleagues are looking to port linux to some fairly old
> > hardware based on one of MPC8360, MPC8360e or MPC8280.  i know little
> > about powerpc, other than those procesors are pretty old and i would
> > be surprised if there was any decent support for them these days.
> >
> >   is there anything out there in the way of either OE/yocto support,
> > or even cheap dev kits based on those one could get to play on? i'm
> > guessing not, but i'm willing to be surprised.
> >
> > rday
> >
> > --
> >
> >
> ============================================================
> > ============
> > Robert P. J. Day                                 Ottawa, Ontario, CANADA
> >                         http://crashcourse.ca
> >
> > Twitter:                                       http://twitter.com/rpjday
> > LinkedIn:                               http://ca.linkedin.com/in/rpjday
> >
> ============================================================
> > ============
> >
> > --
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale