* [U-Boot] what are flash settings for Spansion 4M S29AL032D flash?
@ 2015-12-23 16:07 Robert P. J. Day
0 siblings, 0 replies; only message in thread
From: Robert P. J. Day @ 2015-12-23 16:07 UTC (permalink / raw)
To: u-boot
a couple of us have been fighting with this for a couple hours ...
we have an old powerpc board on which we've hacked u-boot to get to
the prompt, now we're trying to get u-boot to recognize that flash
chip.
at u-boot time, u-boot prints both the manufacturer ID and device as
"0x0" so, clearly, it's not picking that up properly. can anyone
suggest what the proper u-boot configuration selections should be for
that particular flash?
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2015-12-23 16:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-12-23 16:07 [U-Boot] what are flash settings for Spansion 4M S29AL032D flash? Robert P. J. Day
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.