From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: jason98166@gmail.com
Cc: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Heiko Stuebner <heiko.stuebner@cherry.de>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] phy: rockchip-samsung-dcphy: Enable runtime PM at PHY core level
Date: Fri, 21 Aug 2026 15:30:31 +0200 [thread overview]
Message-ID: <aohRxwakzVgAbYff@venus> (raw)
In-Reply-To: <20260821-dcphy-rpm-v1-v1-1-a7db728b2539@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 2502 bytes --]
Hi,
On Fri, Aug 21, 2026 at 07:44:19PM +0800, Jason Yang via B4 Relay wrote:
> From: Jason Yang <jason98166@gmail.com>
>
> phy_create() only enables runtime PM on the new PHY device if the parent
> already has it enabled, and this driver enables it afterwards. The PHY
> device therefore never gets runtime PM, and phy_pm_runtime_get_sync()
> returns -ENOTSUPP for every phy_init() and phy_power_on(). The block is
> still resumed today, but only through the supplier link fw_devlink builds
> from the phys phandle, which fw_devlink=off and =permissive do not.
>
> Move devm_pm_runtime_enable() before devm_phy_create(), as done for the
> sibling HDPTX PHY in commit 10ba8479f460 ("phy:
> phy-rockchip-samsung-hdptx: Enable runtime PM at PHY core level").
>
> Fixes: b2a1a2ae7818 ("phy: rockchip: Add Samsung MIPI D-/C-PHY driver")
> Signed-off-by: Jason Yang <jason98166@gmail.com>
> ---
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Greetings,
-- Sebastian
> drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> index cbd780556da8..11e872cc6611 100644
> --- a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> +++ b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> @@ -1610,16 +1610,16 @@ static int samsung_mipi_dcphy_probe(struct platform_device *pdev)
> return dev_err_probe(dev, PTR_ERR(samsung->grf_apb_rst),
> "Failed to get system grf_apb_rst control\n");
>
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
> +
> samsung->phy = devm_phy_create(dev, NULL, &samsung_mipi_dcphy_ops);
> if (IS_ERR(samsung->phy))
> return dev_err_probe(dev, PTR_ERR(samsung->phy), "Failed to create MIPI DC-PHY\n");
>
> phy_set_drvdata(samsung->phy, samsung);
>
> - ret = devm_pm_runtime_enable(dev);
> - if (ret)
> - return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
> -
> phy_provider = devm_of_phy_provider_register(dev, samsung_mipi_dcphy_xlate);
> if (IS_ERR(phy_provider))
> return dev_err_probe(dev, PTR_ERR(phy_provider),
>
> ---
> base-commit: 1590cf0329716306e948a8fc29f1d3ee87d3989f
> change-id: 20260821-dcphy-rpm-v1-14c80daecbf7
>
> Best regards,
> --
> Jason Yang <jason98166@gmail.com>
>
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: jason98166@gmail.com
Cc: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Heiko Stuebner <heiko.stuebner@cherry.de>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] phy: rockchip-samsung-dcphy: Enable runtime PM at PHY core level
Date: Fri, 21 Aug 2026 15:30:31 +0200 [thread overview]
Message-ID: <aohRxwakzVgAbYff@venus> (raw)
In-Reply-To: <20260821-dcphy-rpm-v1-v1-1-a7db728b2539@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2502 bytes --]
Hi,
On Fri, Aug 21, 2026 at 07:44:19PM +0800, Jason Yang via B4 Relay wrote:
> From: Jason Yang <jason98166@gmail.com>
>
> phy_create() only enables runtime PM on the new PHY device if the parent
> already has it enabled, and this driver enables it afterwards. The PHY
> device therefore never gets runtime PM, and phy_pm_runtime_get_sync()
> returns -ENOTSUPP for every phy_init() and phy_power_on(). The block is
> still resumed today, but only through the supplier link fw_devlink builds
> from the phys phandle, which fw_devlink=off and =permissive do not.
>
> Move devm_pm_runtime_enable() before devm_phy_create(), as done for the
> sibling HDPTX PHY in commit 10ba8479f460 ("phy:
> phy-rockchip-samsung-hdptx: Enable runtime PM at PHY core level").
>
> Fixes: b2a1a2ae7818 ("phy: rockchip: Add Samsung MIPI D-/C-PHY driver")
> Signed-off-by: Jason Yang <jason98166@gmail.com>
> ---
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Greetings,
-- Sebastian
> drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> index cbd780556da8..11e872cc6611 100644
> --- a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> +++ b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> @@ -1610,16 +1610,16 @@ static int samsung_mipi_dcphy_probe(struct platform_device *pdev)
> return dev_err_probe(dev, PTR_ERR(samsung->grf_apb_rst),
> "Failed to get system grf_apb_rst control\n");
>
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
> +
> samsung->phy = devm_phy_create(dev, NULL, &samsung_mipi_dcphy_ops);
> if (IS_ERR(samsung->phy))
> return dev_err_probe(dev, PTR_ERR(samsung->phy), "Failed to create MIPI DC-PHY\n");
>
> phy_set_drvdata(samsung->phy, samsung);
>
> - ret = devm_pm_runtime_enable(dev);
> - if (ret)
> - return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
> -
> phy_provider = devm_of_phy_provider_register(dev, samsung_mipi_dcphy_xlate);
> if (IS_ERR(phy_provider))
> return dev_err_probe(dev, PTR_ERR(phy_provider),
>
> ---
> base-commit: 1590cf0329716306e948a8fc29f1d3ee87d3989f
> change-id: 20260821-dcphy-rpm-v1-14c80daecbf7
>
> Best regards,
> --
> Jason Yang <jason98166@gmail.com>
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: jason98166@gmail.com
Cc: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Heiko Stuebner <heiko.stuebner@cherry.de>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] phy: rockchip-samsung-dcphy: Enable runtime PM at PHY core level
Date: Fri, 21 Aug 2026 15:30:31 +0200 [thread overview]
Message-ID: <aohRxwakzVgAbYff@venus> (raw)
In-Reply-To: <20260821-dcphy-rpm-v1-v1-1-a7db728b2539@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 2502 bytes --]
Hi,
On Fri, Aug 21, 2026 at 07:44:19PM +0800, Jason Yang via B4 Relay wrote:
> From: Jason Yang <jason98166@gmail.com>
>
> phy_create() only enables runtime PM on the new PHY device if the parent
> already has it enabled, and this driver enables it afterwards. The PHY
> device therefore never gets runtime PM, and phy_pm_runtime_get_sync()
> returns -ENOTSUPP for every phy_init() and phy_power_on(). The block is
> still resumed today, but only through the supplier link fw_devlink builds
> from the phys phandle, which fw_devlink=off and =permissive do not.
>
> Move devm_pm_runtime_enable() before devm_phy_create(), as done for the
> sibling HDPTX PHY in commit 10ba8479f460 ("phy:
> phy-rockchip-samsung-hdptx: Enable runtime PM at PHY core level").
>
> Fixes: b2a1a2ae7818 ("phy: rockchip: Add Samsung MIPI D-/C-PHY driver")
> Signed-off-by: Jason Yang <jason98166@gmail.com>
> ---
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Greetings,
-- Sebastian
> drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> index cbd780556da8..11e872cc6611 100644
> --- a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> +++ b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
> @@ -1610,16 +1610,16 @@ static int samsung_mipi_dcphy_probe(struct platform_device *pdev)
> return dev_err_probe(dev, PTR_ERR(samsung->grf_apb_rst),
> "Failed to get system grf_apb_rst control\n");
>
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
> +
> samsung->phy = devm_phy_create(dev, NULL, &samsung_mipi_dcphy_ops);
> if (IS_ERR(samsung->phy))
> return dev_err_probe(dev, PTR_ERR(samsung->phy), "Failed to create MIPI DC-PHY\n");
>
> phy_set_drvdata(samsung->phy, samsung);
>
> - ret = devm_pm_runtime_enable(dev);
> - if (ret)
> - return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
> -
> phy_provider = devm_of_phy_provider_register(dev, samsung_mipi_dcphy_xlate);
> if (IS_ERR(phy_provider))
> return dev_err_probe(dev, PTR_ERR(phy_provider),
>
> ---
> base-commit: 1590cf0329716306e948a8fc29f1d3ee87d3989f
> change-id: 20260821-dcphy-rpm-v1-14c80daecbf7
>
> Best regards,
> --
> Jason Yang <jason98166@gmail.com>
>
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 112 bytes --]
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2026-08-21 13:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-21 11:44 [PATCH] phy: rockchip-samsung-dcphy: Enable runtime PM at PHY core level Jason Yang via B4 Relay
2026-08-21 11:44 ` Jason Yang
2026-08-21 11:44 ` Jason Yang via B4 Relay
2026-08-21 11:44 ` Jason Yang via B4 Relay
2026-08-21 13:30 ` Sebastian Reichel [this message]
2026-08-21 13:30 ` Sebastian Reichel
2026-08-21 13:30 ` Sebastian Reichel
2026-08-27 13:36 ` Heiko Stuebner
2026-08-27 13:36 ` Heiko Stuebner
2026-08-27 13:36 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aohRxwakzVgAbYff@venus \
--to=sebastian.reichel@collabora.com \
--cc=heiko.stuebner@cherry.de \
--cc=heiko@sntech.de \
--cc=jason98166@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=neil.armstrong@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.