* [PATCH v2 1/3] arm64: dts: qcom: sm8750: Add camss node
2026-06-18 12:03 [PATCH v2 0/3] Add CCI and CAMSS support for SM8750 Hangxiang Ma
@ 2026-06-18 12:03 ` Hangxiang Ma
2026-06-18 12:14 ` sashiko-bot
2026-06-18 12:03 ` [PATCH v2 2/3] arm64: dts: qcom: sm8750: Add CCI definitions Hangxiang Ma
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Hangxiang Ma @ 2026-06-18 12:03 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel,
jeyaprakash.soundrapandian, Vijay Kumar Tumati, Hangxiang Ma
Add node for the SM8750 camera subsystem.
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/sm8750.dtsi | 203 +++++++++++++++++++++++++++++++++++
1 file changed, 203 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index fafed417c66f..15eb588acafb 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -3037,6 +3037,209 @@ videocc: clock-controller@aaf0000 {
#power-domain-cells = <1>;
};
+ camss: isp@ad27000 {
+ compatible = "qcom,sm8750-camss";
+
+ reg = <0x0 0x0ad27000 0x0 0x2b00>,
+ <0x0 0x0ad2a000 0x0 0x2b00>,
+ <0x0 0x0ad2d000 0x0 0x2b00>,
+ <0x0 0x0ad6d000 0x0 0xa00>,
+ <0x0 0x0ad72000 0x0 0xa00>,
+ <0x0 0x0ada9000 0x0 0x2000>,
+ <0x0 0x0adab000 0x0 0x2000>,
+ <0x0 0x0adad000 0x0 0x2000>,
+ <0x0 0x0adaf000 0x0 0x2000>,
+ <0x0 0x0adb1000 0x0 0x2000>,
+ <0x0 0x0adb3000 0x0 0x2000>,
+ <0x0 0x0ad8b000 0x0 0x400>,
+ <0x0 0x0ad8c000 0x0 0x400>,
+ <0x0 0x0ad8d000 0x0 0x400>,
+ <0x0 0x0ac86000 0x0 0x10000>,
+ <0x0 0x0ac96000 0x0 0x10000>,
+ <0x0 0x0aca6000 0x0 0x10000>,
+ <0x0 0x0ad6e000 0x0 0x3000>,
+ <0x0 0x0ad73000 0x0 0x3000>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "csitpg0",
+ "csitpg1",
+ "csitpg2",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ clocks = <&camcc CAM_CC_CAMNOC_NRT_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_AXI_CLK>,
+ <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CAM_TOP_FAST_AHB_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_0_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_1_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_2_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_IFE_LITE_CLK>,
+ <&camcc CAM_CC_CSID_CLK>,
+ <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY5_CLK>,
+ <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_TFE_0_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_0_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_TFE_1_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_1_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_TFE_2_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_2_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+ <&camcc CAM_CC_QDSS_DEBUG_XO_CLK>;
+ clock-names = "camnoc_nrt_axi",
+ "camnoc_rt_axi",
+ "cpas_ahb",
+ "cpas_fast_ahb",
+ "cpas_vfe0",
+ "cpas_vfe1",
+ "cpas_vfe2",
+ "cpas_vfe_lite",
+ "csid",
+ "csid_csiphy_rx",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "csiphy5",
+ "csiphy5_timer",
+ "gcc_axi_hf",
+ "gcc_axi_sf",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe2",
+ "vfe2_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid",
+ "qdss_debug_xo";
+
+ interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_NRT_ICP_SF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_mnoc",
+ "sf_mnoc",
+ "sf_icp_mnoc";
+
+ iommus = <&apps_smmu 0x1c00 0x00>;
+
+ power-domains = <&camcc CAM_CC_TFE_0_GDSC>,
+ <&camcc CAM_CC_TFE_1_GDSC>,
+ <&camcc CAM_CC_TFE_2_GDSC>,
+ <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "top";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ };
+ };
+
+ };
+
mdss: display-subsystem@ae00000 {
compatible = "qcom,sm8750-mdss";
reg = <0x0 0x0ae00000 0x0 0x1000>;
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 2/3] arm64: dts: qcom: sm8750: Add CCI definitions
2026-06-18 12:03 [PATCH v2 0/3] Add CCI and CAMSS support for SM8750 Hangxiang Ma
2026-06-18 12:03 ` [PATCH v2 1/3] arm64: dts: qcom: sm8750: Add camss node Hangxiang Ma
@ 2026-06-18 12:03 ` Hangxiang Ma
2026-06-18 12:03 ` [PATCH v2 3/3] arm64: dts: qcom: sm8750: Add camera MCLK pinctrl Hangxiang Ma
2026-08-31 18:27 ` [PATCH v2 0/3] Add CCI and CAMSS support for SM8750 Bjorn Andersson
3 siblings, 0 replies; 6+ messages in thread
From: Hangxiang Ma @ 2026-06-18 12:03 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel,
jeyaprakash.soundrapandian, Vijay Kumar Tumati, Hangxiang Ma
Qualcomm SM8750 SoC has three Camera Control Interface (CCI). Each
controller contains two I2C hosts.
Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/sm8750.dtsi | 282 +++++++++++++++++++++++++++++++++++
1 file changed, 282 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 15eb588acafb..7dda8408c6d1 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -3037,6 +3037,96 @@ videocc: clock-controller@aaf0000 {
#power-domain-cells = <1>;
};
+ cci0: cci@ac7b000 {
+ compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac7b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>;
+ clock-names = "ahb", "cci";
+ pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+ pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac7c000 {
+ compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac7c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>;
+ clock-names = "ahb", "cci";
+ pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+ pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@ac7d000 {
+ compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac7d000 0x0 0x1000>;
+ interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CCI_2_CLK>;
+ clock-names = "ahb", "cci";
+ pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+ pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camss: isp@ad27000 {
compatible = "qcom,sm8750-camss";
@@ -3809,6 +3899,198 @@ tlmm: pinctrl@f100000 {
gpio-ranges = <&tlmm 0 0 216>;
wakeup-parent = <&pdc>;
+ cci0_0_default: cci0-0-default-state {
+ sda-pins {
+ pins = "gpio113";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio114";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci0_0_sleep: cci0-0-sleep-state {
+ sda-pins {
+ pins = "gpio113";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio114";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci0_1_default: cci0-1-default-state {
+ sda-pins {
+ pins = "gpio115";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio116";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci0_1_sleep: cci0-1-sleep-state {
+ sda-pins {
+ pins = "gpio115";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio116";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci1_0_default: cci1-0-default-state {
+ sda-pins {
+ pins = "gpio117";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio118";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci1_0_sleep: cci1-0-sleep-state {
+ sda-pins {
+ pins = "gpio117";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio118";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci1_1_default: cci1-1-default-state {
+ sda-pins {
+ pins = "gpio111";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio164";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci1_1_sleep: cci1-1-sleep-state {
+ sda-pins {
+ pins = "gpio111";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio164";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci2_0_default: cci2-0-default-state {
+ sda-pins {
+ pins = "gpio112";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio153";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci2_0_sleep: cci2-0-sleep-state {
+ sda-pins {
+ pins = "gpio112";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio153";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci2_1_default: cci2-1-default-state {
+ sda-pins {
+ pins = "gpio119";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio120";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci2_1_sleep: cci2-1-sleep-state {
+ sda-pins {
+ pins = "gpio119";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio120";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
hub_i2c0_data_clk: hub-i2c0-data-clk-state {
/* SDA, SCL */
pins = "gpio64", "gpio65";
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread