Re: [PATCH V5 0/4] arm64: dts: freescale: Add chargebyte Charge Control Y

[Frank Li <Frank.li@oss.nxp.com>]

On Mon, Sep 21, 2026 at 03:09:23PM +0200, Stefan Wahren wrote:
> Hi Frank,
>
> Am 07.09.26 um 17:04 schrieb Stefan Wahren:
> > This series adds support for the chargebyte Charge Control Y, which is
> > an Electrical Vehicle Supply Equipment (EVSE) for MCS (Megawatt
> > Charging System) charging stations.
> >
> > sashiko reported in the first version of the series [1] that X_nRST_LAN
> > is available via GPIO line names, but there is no reset mechanismn in the
> > device tree. This finding is valid. Since the reset line feature isn't
> > implemented for LAN8651 driver yet, I like to proceed with the current
> > version. The LAN8651 handles reset via SPI commands and in rare cases
> > we still have the possibility to control the reset from userspace.
> > Btw the pin has a pull resistor in hardware, so it's not floating.
> >
> > sashiko complained in the fourth version of the series [2] about the
> > reset polarity of ethphy2 and the different drive strength across the
> > data lines. Both is intended.
> >
> > [1] - https://lore.kernel.org/linux-devicetree/20260818093147.E556C1F000E9@smtp.kernel.org/
> > [2] - https://lore.kernel.org/linux-devicetree/20260903082122.A777C1F000E9@smtp.kernel.org/
> >
> > Changes in V5:
> > - fix delete-node for pinctrl_leds (reported by sashiko)
> > - add Krzysztof's Reviewed-by
> I didn't received any feedback for V5 yet. Do you have any comments or could
> it be merged?

Wait for vinod pick phy binding part.

Frank

>
> Best regards
>