From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Ulf Hansson <ulfh@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
linux-pm@vger.kernel.org, linux-rockchip@lists.infradead.org
Subject: Re: [PATCH 2/4] pmdomain: rockchip: fix clock leak on domain probe failure
Date: Tue, 22 Sep 2026 16:46:20 +0200 [thread overview]
Message-ID: <arKUZKPoySJBQ8Tz@venus> (raw)
In-Reply-To: <3fa0fcbc-b6ff-4934-bb7d-b763d6f5f818@rock-chips.com>
[-- Attachment #1.1: Type: text/plain, Size: 1278 bytes --]
Hi,
On Sun, Sep 20, 2026 at 09:15:52AM +0800, Shawn Lin wrote:
> Hi Sebastian
>
> 在 2026/09/19 星期六 8:13, Shawn Lin 写道:
> > Hi Sebastian
> >
> > 在 2026/09/19 星期六 1:21, Sebastian Reichel 写道:
> > > Hi,
> > >
> > > On Fri, Sep 18, 2026 at 08:07:36PM +0800, Shawn Lin wrote:
> > > > When of_clk_get() failed in the middle of the loop, the references of
> > > > the clocks acquired so far were leaked instead of being released by
> > > > the error path.
> > > >
> > > > Fixes: d909072d0521 ("soc: rockchip: power-domain: use clk_bulk APIs")
> > > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> > > > ---
> > >
> > > Right, but this should switch
> > >
> > > pd->clks = devm_kcalloc(...);
> > >
> > > to
> > >
> > > pd->clks = devm_kzalloc(...);
> > >
> > > at the same time to ensure that clk_bulk_put() does not run over
> > > non-initialized data. Otherwise
> >
> > Good catch, will improve it in v2.
> >
>
> I was too quick to response, but didn't looked into devm_kcalloc, just
> guess it didn't zero the data from the name. However it does zero the
> data by passing in __GFP_ZERO. So I need to respin v3 and drop
> devm_kzalloc change.
Sorry about that detour.
Greetings,
-- Sebastian
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Ulf Hansson <ulfh@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
linux-pm@vger.kernel.org, linux-rockchip@lists.infradead.org
Subject: Re: [PATCH 2/4] pmdomain: rockchip: fix clock leak on domain probe failure
Date: Tue, 22 Sep 2026 16:46:20 +0200 [thread overview]
Message-ID: <arKUZKPoySJBQ8Tz@venus> (raw)
In-Reply-To: <3fa0fcbc-b6ff-4934-bb7d-b763d6f5f818@rock-chips.com>
[-- Attachment #1: Type: text/plain, Size: 1278 bytes --]
Hi,
On Sun, Sep 20, 2026 at 09:15:52AM +0800, Shawn Lin wrote:
> Hi Sebastian
>
> 在 2026/09/19 星期六 8:13, Shawn Lin 写道:
> > Hi Sebastian
> >
> > 在 2026/09/19 星期六 1:21, Sebastian Reichel 写道:
> > > Hi,
> > >
> > > On Fri, Sep 18, 2026 at 08:07:36PM +0800, Shawn Lin wrote:
> > > > When of_clk_get() failed in the middle of the loop, the references of
> > > > the clocks acquired so far were leaked instead of being released by
> > > > the error path.
> > > >
> > > > Fixes: d909072d0521 ("soc: rockchip: power-domain: use clk_bulk APIs")
> > > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> > > > ---
> > >
> > > Right, but this should switch
> > >
> > > pd->clks = devm_kcalloc(...);
> > >
> > > to
> > >
> > > pd->clks = devm_kzalloc(...);
> > >
> > > at the same time to ensure that clk_bulk_put() does not run over
> > > non-initialized data. Otherwise
> >
> > Good catch, will improve it in v2.
> >
>
> I was too quick to response, but didn't looked into devm_kcalloc, just
> guess it didn't zero the data from the name. However it does zero the
> data by passing in __GFP_ZERO. So I need to respin v3 and drop
> devm_kzalloc change.
Sorry about that detour.
Greetings,
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2026-09-22 14:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 12:07 [PATCH 0/4] Small fixes and improvement for Rockchip pm-domains driver Shawn Lin
2026-09-18 12:07 ` [PATCH 1/4] pmdomain: rockchip: propagate subdomain add errors Shawn Lin
2026-09-18 12:07 ` Shawn Lin
2026-09-18 17:18 ` Sebastian Reichel
2026-09-18 17:18 ` Sebastian Reichel
2026-09-18 12:07 ` [PATCH 2/4] pmdomain: rockchip: fix clock leak on domain probe failure Shawn Lin
2026-09-18 12:07 ` Shawn Lin
2026-09-18 17:21 ` Sebastian Reichel
2026-09-18 17:21 ` Sebastian Reichel
2026-09-19 0:13 ` Shawn Lin
2026-09-19 0:13 ` Shawn Lin
2026-09-20 1:15 ` Shawn Lin
2026-09-20 1:15 ` Shawn Lin
2026-09-22 14:46 ` Sebastian Reichel [this message]
2026-09-22 14:46 ` Sebastian Reichel
2026-09-18 12:07 ` [PATCH 3/4] pmdomain: rockchip: don't ignore clock lookup errors on attach Shawn Lin
2026-09-18 12:07 ` Shawn Lin
2026-09-18 17:59 ` Sebastian Reichel
2026-09-18 17:59 ` Sebastian Reichel
2026-09-18 12:07 ` [PATCH 4/4] pmdomain: rockchip: drop duplicated errno from supply failure message Shawn Lin
2026-09-18 12:07 ` Shawn Lin
2026-09-18 17:54 ` Sebastian Reichel
2026-09-18 17:54 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=arKUZKPoySJBQ8Tz@venus \
--to=sebastian.reichel@collabora.com \
--cc=heiko@sntech.de \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=shawn.lin@rock-chips.com \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.