All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mostafa Saleh <smostafa@google.com>
To: sashiko-reviews@lists.linux.dev
Cc: kvmarm@lists.linux.dev, Oliver Upton <oupton@kernel.org>,
	Marc Zyngier <maz@kernel.org>
Subject: Re: [PATCH v8 14/25] iommu/arm-smmu-v3-kvm: Shadow the command queue
Date: Tue, 22 Sep 2026 15:34:48 +0000	[thread overview]
Message-ID: <arKgGEyRZutTLLB6@google.com> (raw)
In-Reply-To: <20260922133243.DE4181F000FF@smtp.kernel.org>

On Tue, Sep 22, 2026 at 01:32:43PM +0000, sashiko-bot@kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
> - [Medium] hyp: wrong WARN_ON() in smmu_emulate_cmdq_enable() causes panic
> - [Medium] hyp: WARN_ON() on host MMIO access creates dead-branch trap
> --
> 
> commit 6579ca2101bec241418169d448cfd8bd062f327e
> Author: Mostafa Saleh <smostafa@google.com>
> 
> iommu/arm-smmu-v3-kvm: Shadow the command queue
> 
> At boot, allocate a command queue per SMMU which is used as a shadow
> by the hypervisor. The host command queue is pinned in a shared state
> to prevent it from being donated to VMs.
> 
> > diff --git a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c
> > index 7a51cb70205fe..b26c21b595b47 100644
> > --- a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c
> > +++ b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c
> [ ... ]
> > @@ -132,6 +222,23 @@ static int smmu_init(void)
> >  	return ret;
> >  }
> >  
> > +static void smmu_emulate_cmdq_enable(struct hyp_arm_smmu_v3_device *smmu)
> > +{
> > +	u32 shift = smmu->cmdq_host.q_base & Q_BASE_LOG2SIZE;
> > +
> > +	smmu->cmdq_host.llq.max_n_shift = min(shift, smmu->cmdq_max_shift);
> > +	smmu->cmdq_host.base_dma = smmu->cmdq_host.q_base & Q_BASE_ADDR_MASK;
> > +	smmu->cmdq_host.base_dma &= ~(cmdq_size(&smmu->cmdq_host) - 1);
> > +	WARN_ON(smmu_share_pages(smmu->cmdq_host.base_dma,
> > +				 cmdq_size(&smmu->cmdq_host)));
> 
> [Severity: Medium]
> If the host provides an invalid or unmapped command queue base address via
> the ARM_SMMU_CMDQ_BASE register, smmu_share_pages() will return an error.
> Since WARN_ON() expands to a fatal break instruction at EL2, would this
> allow the host to intentionally crash the hypervisor by passing bad input?
> 
> Could we handle the smmu_share_pages() failure gracefully instead of using
> WARN_ON() on host-controlled inputs?

No it couldn't, this only happen if the host is malicious or gone too
wrong.

> 
> > +}
> > +
> [ ... ]
> > @@ -158,6 +265,14 @@ static bool smmu_dabt_device(struct hyp_arm_smmu_v3_device *smmu,
> >  		break;
> >  	/* Passthrough the register access for bisectability, handled later */
> >  	case ARM_SMMU_CMDQ_BASE:
> > +		if (is_write) {
> > +			/* Not allowed by the architecture */
> > +			if (is_cmdq_enabled(smmu))
> > +				break;
> > +			smmu->cmdq_host.q_base = val;
> > +		}
> > +		mask = read_write;
> > +		break;
> 
> [Severity: Medium]
> When the host writes to ARM_SMMU_CMDQ_BASE while the command queue is
> enabled, the switch statement in smmu_dabt_device() breaks with mask
> remaining zero.

Yes, because that is not allowed by the architecture and no well
behaved host will attempt that.

> 
> Later in smmu_dabt_device(), there is an existing check:
> 
> > 	if (WARN_ON(!mask))
> > 		goto out_ret;
> 
> Because WARN_ON() at EL2 causes a fatal panic, the goto out_ret recovery
> path is dead code. Would this allow the host to crash the hypervisor by
> performing an invalid write to ARM_SMMU_CMDQ_BASE?
> 

Yes, the host can crash the hypervisor in many ways.

Thanks,
Mostafa




> -- 
> Sashiko AI review · https://sashiko.dev/#/patchset/20260922131259.2975334-1-smostafa@google.com?part=14

  reply	other threads:[~2026-09-22 15:34 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-22 13:12 [PATCH v8 00/25] KVM: arm64: SMMUv3 driver for pKVM (trap and emulate) Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 01/25] KVM: arm64: Donate MMIO to the hypervisor Mostafa Saleh
2026-09-22 13:29   ` sashiko-bot
2026-09-22 14:25     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 02/25] iommu/arm-smmu-v3: Move Queue and STE functions to header Mostafa Saleh
2026-09-22 18:23   ` Nicolin Chen
2026-09-22 13:12 ` [PATCH v8 03/25] iommu/arm-smmu-v3: Introduce RangeInval encoding helpers Mostafa Saleh
2026-09-22 18:45   ` Nicolin Chen
2026-09-22 13:12 ` [PATCH v8 04/25] iommu/arm-smmu-v3: Move IDR parsing to common functions Mostafa Saleh
2026-09-22 19:45   ` Nicolin Chen
2026-09-22 21:48     ` Jason Gunthorpe
2026-09-23 10:13       ` Mostafa Saleh
2026-09-23 11:55         ` Jason Gunthorpe
2026-09-23 12:21           ` Mostafa Saleh
2026-09-23 10:09     ` Mostafa Saleh
2026-09-23 11:52       ` Jason Gunthorpe
2026-09-23 12:18         ` Mostafa Saleh
2026-09-23 12:34           ` Jason Gunthorpe
2026-09-22 13:12 ` [PATCH v8 05/25] iommu/arm-smmu-v3: Move hitless machinery to common code Mostafa Saleh
2026-09-22 19:59   ` Nicolin Chen
2026-09-23 10:15     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 06/25] KVM: arm64: iommu: Introduce IOMMU driver infrastructure Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 07/25] KVM: arm64: iommu: Shadow host stage-2 page table Mostafa Saleh
2026-09-22 13:23   ` sashiko-bot
2026-09-22 14:29     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 08/25] KVM: arm64: iommu: Add memory pool Mostafa Saleh
2026-09-22 13:25   ` sashiko-bot
2026-09-22 14:34     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 09/25] KVM: arm64: iommu: Support DABT for IOMMU Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 10/25] iommu/arm-smmu-v3-kvm: Add SMMUv3 driver Mostafa Saleh
2026-09-22 22:39   ` Nicolin Chen
2026-09-23 10:30     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 11/25] iommu/arm-smmu-v3-kvm: Add the kernel driver Mostafa Saleh
2026-09-22 13:28   ` sashiko-bot
2026-09-22 15:12     ` Mostafa Saleh
2026-09-23  0:22   ` Nicolin Chen
2026-09-23 11:52     ` Mostafa Saleh
2026-09-23 15:55       ` Jason Gunthorpe
2026-09-23 17:07         ` Mostafa Saleh
2026-09-23 17:22           ` Jason Gunthorpe
2026-09-22 13:12 ` [PATCH v8 12/25] iommu/arm-smmu-v3-kvm: Probe SMMU HW Mostafa Saleh
2026-09-23  1:43   ` Nicolin Chen
2026-09-23 12:03     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 13/25] iommu/arm-smmu-v3-kvm: Add MMIO emulation Mostafa Saleh
2026-09-22 13:22   ` sashiko-bot
2026-09-22 15:30     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 14/25] iommu/arm-smmu-v3-kvm: Shadow the command queue Mostafa Saleh
2026-09-22 13:32   ` sashiko-bot
2026-09-22 15:34     ` Mostafa Saleh [this message]
2026-09-22 13:12 ` [PATCH v8 15/25] iommu/arm-smmu-v3-kvm: Add CMDQ functions Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 16/25] iommu/arm-smmu-v3-kvm: Emulate CMDQ for host Mostafa Saleh
2026-09-22 13:32   ` sashiko-bot
2026-09-22 15:48     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 17/25] iommu/arm-smmu-v3-kvm: Shadow stream table Mostafa Saleh
2026-09-22 13:33   ` sashiko-bot
2026-09-22 15:50     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 18/25] iommu/arm-smmu-v3-kvm: Shadow STEs Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 19/25] iommu/arm-smmu-v3-kvm: Share other queues Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 20/25] iommu/arm-smmu-v3-kvm: Emulate GBPA Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 21/25] iommu/io-pgtable-arm: Support io-pgtable-arm in the hypervisor Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 22/25] iommu/arm-smmu-v3-kvm: Shadow the CPU stage-2 page table Mostafa Saleh
2026-09-22 13:38   ` sashiko-bot
2026-09-22 15:52     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 23/25] iommu/arm-smmu-v3-kvm: Invalidate the SMMU TLBs Mostafa Saleh
2026-09-22 13:45   ` sashiko-bot
2026-09-22 15:55     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 24/25] iommu/arm-smmu-v3-kvm: Enable nesting Mostafa Saleh
2026-09-22 13:49   ` sashiko-bot
2026-09-22 15:57     ` Mostafa Saleh
2026-09-22 13:12 ` [PATCH v8 25/25] KVM: arm64: Add documentation for pKVM DMA isolation Mostafa Saleh
2026-09-22 18:07 ` [PATCH v8 00/25] KVM: arm64: SMMUv3 driver for pKVM (trap and emulate) Nicolin Chen
2026-09-23  8:52   ` Mostafa Saleh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=arKgGEyRZutTLLB6@google.com \
    --to=smostafa@google.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=maz@kernel.org \
    --cc=oupton@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.