* [PATCH] arm64: dts: qcom: Shikra SD Card support
@ 2026-09-11 9:39 ` Monish Chunara
0 siblings, 0 replies; 16+ messages in thread
From: Monish Chunara @ 2026-09-11 9:39 UTC (permalink / raw)
To: Monish Chunara, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Neil Armstrong,
Wesley Cheng, Ulf Hansson, Kernel Team
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-mmc,
Nitin Rawat, Pradeep Pragallapati, Komal Bajaj
This is v5 of the Shikra SD Card support series.
This series adds SD card support for the Shikra platform.
The first patch adds the SDHC2 controller node and the necessary pinctrl
configurations to the base Shikra SoC dtsi. The second patch enables
this support on the Shikra EVK (CQS, CQM, and IQS variants) by defining
the regulator supplies and the card detection GPIO.
Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Changes in v5:
- Rebased on top of latest linux-next
- Fix interrupts-cells to 4 for sdhc_2 (sashiko-bot)
- Moved gpio include directive into shikra-evk.dtsi (sashiko-bot)
- Link to v4: https://lore.kernel.org/all/20260804122054.3462145-1-monish.chunara@oss.qualcomm.com/
Changes in v4:
- Rebase on latest code base
- Collect Reviewed-by tags (Konrad)
- Drop the dependency link - since all base changes are merged
- Link to v3: https://lore.kernel.org/all/20260702073354.3641966-1-monish.chunara@oss.qualcomm.com/
Changes in v3:
- Padded the address part of the reg property in the sdhc_2 node to
8 hex digits with leading zeroes for consistency with other nodes
in the file
- Moved the common sdhc_2 properties to shikra-evk DT file
- Link to v2: https://lore.kernel.org/all/20260630165700.1886608-1-monish.chunara@oss.qualcomm.com
Changes in v2:
- Rectify the alignment for clocks and interconnect properties for SD
card
- Link to v1: https://lore.kernel.org/all/20260604122045.494712-1-monish.chunara@oss.qualcomm.com
Testing:
- Validated on Shikra EVK variants.
Monish Chunara (2):
arm64: dts: qcom: Add SD Card support for Shikra SoC
arm64: dts: qcom: Enable SD card for Shikra EVK
arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 9 ++
arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 9 ++
arch/arm64/boot/dts/qcom/shikra-evk.dtsi | 11 +++
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 9 ++
arch/arm64/boot/dts/qcom/shikra.dtsi | 97 +++++++++++++++++++++
5 files changed, 135 insertions(+)
--
2.34.1
--- b4-submit-tracking ---
{
"series": {
"revision": 5,
"change-id": "20260911-shikra-sd-card-61d428639de0",
"prefixes": [],
"from-thread": "20260804122054.3462145-1-monish.chunara@oss.qualcomm.com"
}
}
--
2.34.1
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH 2/3] arm64: dts: qcom: Add SD Card support for Shikra SoC
2026-09-11 9:39 ` Monish Chunara
@ 2026-09-11 9:39 ` Monish Chunara
-1 siblings, 0 replies; 16+ messages in thread
From: Monish Chunara @ 2026-09-11 9:39 UTC (permalink / raw)
To: Monish Chunara, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Neil Armstrong,
Wesley Cheng, Ulf Hansson, Kernel Team
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-mmc,
Nitin Rawat, Pradeep Pragallapati, Komal Bajaj, Konrad Dybcio
Add support for SD card on Shikra SoC and enable the required pinctrl
configurations.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/shikra.dtsi | 97 ++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 1395c182a2b1..4963c818a7ae 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -942,6 +942,53 @@ rclk-pins {
bias-bus-hold;
};
};
+
+ sdc2_default: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <14>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <14>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <14>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_sleep: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_card_det_n: sd-card-det-n-state {
+ pins = "gpio89";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
pmu@c91000 {
@@ -1330,6 +1377,56 @@ sdhc_ice: crypto@4748000 {
power-domains = <&rpmpd RPMHPD_CX>;
};
+ sdhc_2: mmc@4784000 {
+ compatible = "qcom,shikra-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x0 0x04784000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "hc_irq",
+ "pwr_irq";
+
+ bus-width = <4>;
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface",
+ "core",
+ "xo";
+
+ qcom,dll-config = <0x0007442c>;
+ qcom,ddr-config = <0x80040868>;
+
+ iommus = <&apps_smmu 0x0a0 0x0>;
+
+ interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+ &config_noc SLAVE_SDCC_2 RPM_ACTIVE_TAG>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
+ power-domains = <&rpmpd RPMPD_VDDCX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ status = "disabled";
+
+ sdhc2_opp_table: opp-table-2 {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ };
+ };
+ };
+
gpi_dma0: dma-controller@4a00000 {
compatible = "qcom,shikra-gpi-dma", "qcom,sm6350-gpi-dma";
reg = <0x0 0x04a00000 0x0 0x60000>;
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/3] arm64: dts: qcom: Add SD Card support for Shikra SoC
@ 2026-09-11 9:39 ` Monish Chunara
0 siblings, 0 replies; 16+ messages in thread
From: Monish Chunara @ 2026-09-11 9:39 UTC (permalink / raw)
To: Monish Chunara, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Neil Armstrong,
Wesley Cheng, Ulf Hansson, Kernel Team
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-mmc,
Nitin Rawat, Pradeep Pragallapati, Komal Bajaj, Konrad Dybcio
Add support for SD card on Shikra SoC and enable the required pinctrl
configurations.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/shikra.dtsi | 97 ++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 1395c182a2b1..4963c818a7ae 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -942,6 +942,53 @@ rclk-pins {
bias-bus-hold;
};
};
+
+ sdc2_default: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <14>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <14>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <14>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_sleep: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_card_det_n: sd-card-det-n-state {
+ pins = "gpio89";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
pmu@c91000 {
@@ -1330,6 +1377,56 @@ sdhc_ice: crypto@4748000 {
power-domains = <&rpmpd RPMHPD_CX>;
};
+ sdhc_2: mmc@4784000 {
+ compatible = "qcom,shikra-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x0 0x04784000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "hc_irq",
+ "pwr_irq";
+
+ bus-width = <4>;
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface",
+ "core",
+ "xo";
+
+ qcom,dll-config = <0x0007442c>;
+ qcom,ddr-config = <0x80040868>;
+
+ iommus = <&apps_smmu 0x0a0 0x0>;
+
+ interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+ &config_noc SLAVE_SDCC_2 RPM_ACTIVE_TAG>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
+ power-domains = <&rpmpd RPMPD_VDDCX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ status = "disabled";
+
+ sdhc2_opp_table: opp-table-2 {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ };
+ };
+ };
+
gpi_dma0: dma-controller@4a00000 {
compatible = "qcom,shikra-gpi-dma", "qcom,sm6350-gpi-dma";
reg = <0x0 0x04a00000 0x0 0x60000>;
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH 2/3] arm64: dts: qcom: Add SD Card support for Shikra SoC
2026-09-11 9:39 ` Monish Chunara
@ 2026-09-11 13:34 ` Abel Vesa
-1 siblings, 0 replies; 16+ messages in thread
From: Abel Vesa @ 2026-09-11 13:34 UTC (permalink / raw)
To: Monish Chunara
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vinod Koul, Neil Armstrong, Wesley Cheng,
Ulf Hansson, Kernel Team, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-mmc, Nitin Rawat, Pradeep Pragallapati,
Komal Bajaj, Konrad Dybcio
On 26-09-11 15:09:31, Monish Chunara wrote:
> Add support for SD card on Shikra SoC and enable the required pinctrl
> configurations.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 2/3] arm64: dts: qcom: Add SD Card support for Shikra SoC
@ 2026-09-11 13:34 ` Abel Vesa
0 siblings, 0 replies; 16+ messages in thread
From: Abel Vesa @ 2026-09-11 13:34 UTC (permalink / raw)
To: Monish Chunara
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vinod Koul, Neil Armstrong, Wesley Cheng,
Ulf Hansson, Kernel Team, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-mmc, Nitin Rawat, Pradeep Pragallapati,
Komal Bajaj, Konrad Dybcio
On 26-09-11 15:09:31, Monish Chunara wrote:
> Add support for SD card on Shikra SoC and enable the required pinctrl
> configurations.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 2/3] arm64: dts: qcom: Add SD Card support for Shikra SoC
2026-09-11 9:39 ` Monish Chunara
@ 2026-09-13 15:20 ` Komal Bajaj
-1 siblings, 0 replies; 16+ messages in thread
From: Komal Bajaj @ 2026-09-13 15:20 UTC (permalink / raw)
To: Monish Chunara, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Neil Armstrong,
Wesley Cheng, Ulf Hansson, Kernel Team
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-mmc,
Nitin Rawat, Pradeep Pragallapati, Konrad Dybcio
On 9/11/2026 3:09 PM, Monish Chunara wrote:
> Add support for SD card on Shikra SoC and enable the required pinctrl
> configurations.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Reviewed-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 2/3] arm64: dts: qcom: Add SD Card support for Shikra SoC
@ 2026-09-13 15:20 ` Komal Bajaj
0 siblings, 0 replies; 16+ messages in thread
From: Komal Bajaj @ 2026-09-13 15:20 UTC (permalink / raw)
To: Monish Chunara, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Neil Armstrong,
Wesley Cheng, Ulf Hansson, Kernel Team
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-mmc,
Nitin Rawat, Pradeep Pragallapati, Konrad Dybcio
On 9/11/2026 3:09 PM, Monish Chunara wrote:
> Add support for SD card on Shikra SoC and enable the required pinctrl
> configurations.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Reviewed-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 3/3] arm64: dts: qcom: Enable SD card for Shikra EVK
2026-09-11 9:39 ` Monish Chunara
@ 2026-09-11 9:39 ` Monish Chunara
-1 siblings, 0 replies; 16+ messages in thread
From: Monish Chunara @ 2026-09-11 9:39 UTC (permalink / raw)
To: Monish Chunara, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Neil Armstrong,
Wesley Cheng, Ulf Hansson, Kernel Team
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-mmc,
Nitin Rawat, Pradeep Pragallapati, Komal Bajaj, Konrad Dybcio
Enable SD card for Shikra CQS, CQM and IQS EVK variants. Configure the
vmmc/vqmmc regulators and gpio-based card detection for each board
variant.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 8 ++++++++
arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 8 ++++++++
arch/arm64/boot/dts/qcom/shikra-evk.dtsi | 13 +++++++++++++
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 8 ++++++++
4 files changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
index 286ea46d0c36..2d81b39cc9c1 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
@@ -15,6 +15,7 @@ / {
aliases {
mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
serial0 = &uart0;
};
@@ -66,6 +67,13 @@ &sdhc_1 {
status = "okay";
};
+&sdhc_2 {
+ vmmc-supply = <&pm4125_l21>;
+ vqmmc-supply = <&pm4125_l4>;
+
+ status = "okay";
+};
+
&usb_1 {
dr_mode = "otg";
};
diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
index 01400612d147..570e77e6d1cc 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
@@ -15,6 +15,7 @@ / {
aliases {
mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
serial0 = &uart0;
};
@@ -66,6 +67,13 @@ &sdhc_1 {
status = "okay";
};
+&sdhc_2 {
+ vmmc-supply = <&pm4125_l21>;
+ vqmmc-supply = <&pm4125_l4>;
+
+ status = "okay";
+};
+
&usb_1 {
dr_mode = "otg";
};
diff --git a/arch/arm64/boot/dts/qcom/shikra-evk.dtsi b/arch/arm64/boot/dts/qcom/shikra-evk.dtsi
index 7cdbd257e9c9..620c9956d5e6 100644
--- a/arch/arm64/boot/dts/qcom/shikra-evk.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra-evk.dtsi
@@ -3,6 +3,8 @@
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
+#include <dt-bindings/gpio/gpio.h>
+
&gpu {
status = "okay";
};
@@ -17,6 +19,17 @@ &qupv3_0 {
status = "okay";
};
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+
+ no-sdio;
+ no-mmc;
+
+ cd-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
index 543d769125ef..a1757e24d1cd 100644
--- a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
@@ -15,6 +15,7 @@ / {
aliases {
mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
serial0 = &uart0;
};
@@ -58,6 +59,13 @@ &sdhc_1 {
status = "okay";
};
+&sdhc_2 {
+ vmmc-supply = <&pm8150_l10>;
+ vqmmc-supply = <&pm8150_l2>;
+
+ status = "okay";
+};
+
&usb_1_hsphy {
vdd-supply = <&pm8150_l4>;
vdda-pll-supply = <&pm8150_l12>;
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 3/3] arm64: dts: qcom: Enable SD card for Shikra EVK
@ 2026-09-11 9:39 ` Monish Chunara
0 siblings, 0 replies; 16+ messages in thread
From: Monish Chunara @ 2026-09-11 9:39 UTC (permalink / raw)
To: Monish Chunara, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Neil Armstrong,
Wesley Cheng, Ulf Hansson, Kernel Team
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-mmc,
Nitin Rawat, Pradeep Pragallapati, Komal Bajaj, Konrad Dybcio
Enable SD card for Shikra CQS, CQM and IQS EVK variants. Configure the
vmmc/vqmmc regulators and gpio-based card detection for each board
variant.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 8 ++++++++
arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 8 ++++++++
arch/arm64/boot/dts/qcom/shikra-evk.dtsi | 13 +++++++++++++
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 8 ++++++++
4 files changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
index 286ea46d0c36..2d81b39cc9c1 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
@@ -15,6 +15,7 @@ / {
aliases {
mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
serial0 = &uart0;
};
@@ -66,6 +67,13 @@ &sdhc_1 {
status = "okay";
};
+&sdhc_2 {
+ vmmc-supply = <&pm4125_l21>;
+ vqmmc-supply = <&pm4125_l4>;
+
+ status = "okay";
+};
+
&usb_1 {
dr_mode = "otg";
};
diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
index 01400612d147..570e77e6d1cc 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
@@ -15,6 +15,7 @@ / {
aliases {
mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
serial0 = &uart0;
};
@@ -66,6 +67,13 @@ &sdhc_1 {
status = "okay";
};
+&sdhc_2 {
+ vmmc-supply = <&pm4125_l21>;
+ vqmmc-supply = <&pm4125_l4>;
+
+ status = "okay";
+};
+
&usb_1 {
dr_mode = "otg";
};
diff --git a/arch/arm64/boot/dts/qcom/shikra-evk.dtsi b/arch/arm64/boot/dts/qcom/shikra-evk.dtsi
index 7cdbd257e9c9..620c9956d5e6 100644
--- a/arch/arm64/boot/dts/qcom/shikra-evk.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra-evk.dtsi
@@ -3,6 +3,8 @@
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
+#include <dt-bindings/gpio/gpio.h>
+
&gpu {
status = "okay";
};
@@ -17,6 +19,17 @@ &qupv3_0 {
status = "okay";
};
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+
+ no-sdio;
+ no-mmc;
+
+ cd-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
index 543d769125ef..a1757e24d1cd 100644
--- a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
@@ -15,6 +15,7 @@ / {
aliases {
mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
serial0 = &uart0;
};
@@ -58,6 +59,13 @@ &sdhc_1 {
status = "okay";
};
+&sdhc_2 {
+ vmmc-supply = <&pm8150_l10>;
+ vqmmc-supply = <&pm8150_l2>;
+
+ status = "okay";
+};
+
&usb_1_hsphy {
vdd-supply = <&pm8150_l4>;
vdda-pll-supply = <&pm8150_l12>;
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH 3/3] arm64: dts: qcom: Enable SD card for Shikra EVK
2026-09-11 9:39 ` Monish Chunara
@ 2026-09-11 13:35 ` Abel Vesa
-1 siblings, 0 replies; 16+ messages in thread
From: Abel Vesa @ 2026-09-11 13:35 UTC (permalink / raw)
To: Monish Chunara
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vinod Koul, Neil Armstrong, Wesley Cheng,
Ulf Hansson, Kernel Team, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-mmc, Nitin Rawat, Pradeep Pragallapati,
Komal Bajaj, Konrad Dybcio
On 26-09-11 15:09:32, Monish Chunara wrote:
> Enable SD card for Shikra CQS, CQM and IQS EVK variants. Configure the
> vmmc/vqmmc regulators and gpio-based card detection for each board
> variant.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] arm64: dts: qcom: Enable SD card for Shikra EVK
@ 2026-09-11 13:35 ` Abel Vesa
0 siblings, 0 replies; 16+ messages in thread
From: Abel Vesa @ 2026-09-11 13:35 UTC (permalink / raw)
To: Monish Chunara
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vinod Koul, Neil Armstrong, Wesley Cheng,
Ulf Hansson, Kernel Team, linux-arm-msm, devicetree, linux-kernel,
linux-phy, linux-mmc, Nitin Rawat, Pradeep Pragallapati,
Komal Bajaj, Konrad Dybcio
On 26-09-11 15:09:32, Monish Chunara wrote:
> Enable SD card for Shikra CQS, CQM and IQS EVK variants. Configure the
> vmmc/vqmmc regulators and gpio-based card detection for each board
> variant.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] arm64: dts: qcom: Enable SD card for Shikra EVK
2026-09-11 9:39 ` Monish Chunara
@ 2026-09-13 15:20 ` Komal Bajaj
-1 siblings, 0 replies; 16+ messages in thread
From: Komal Bajaj @ 2026-09-13 15:20 UTC (permalink / raw)
To: Monish Chunara, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Neil Armstrong,
Wesley Cheng, Ulf Hansson, Kernel Team
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-mmc,
Nitin Rawat, Pradeep Pragallapati, Konrad Dybcio
On 9/11/2026 3:09 PM, Monish Chunara wrote:
> Enable SD card for Shikra CQS, CQM and IQS EVK variants. Configure the
> vmmc/vqmmc regulators and gpio-based card detection for each board
> variant.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Reviewed-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] arm64: dts: qcom: Enable SD card for Shikra EVK
@ 2026-09-13 15:20 ` Komal Bajaj
0 siblings, 0 replies; 16+ messages in thread
From: Komal Bajaj @ 2026-09-13 15:20 UTC (permalink / raw)
To: Monish Chunara, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Neil Armstrong,
Wesley Cheng, Ulf Hansson, Kernel Team
Cc: linux-arm-msm, devicetree, linux-kernel, linux-phy, linux-mmc,
Nitin Rawat, Pradeep Pragallapati, Konrad Dybcio
On 9/11/2026 3:09 PM, Monish Chunara wrote:
> Enable SD card for Shikra CQS, CQM and IQS EVK variants. Configure the
> vmmc/vqmmc regulators and gpio-based card detection for each board
> variant.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Reviewed-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] arm64: dts: qcom: Shikra SD Card support
2026-09-11 9:39 ` Monish Chunara
@ 2026-09-25 20:27 ` Bjorn Andersson
-1 siblings, 0 replies; 16+ messages in thread
From: Bjorn Andersson @ 2026-09-25 20:27 UTC (permalink / raw)
To: Monish Chunara
Cc: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Vinod Koul, Neil Armstrong, Wesley Cheng, Ulf Hansson,
Kernel Team, linux-arm-msm, devicetree, linux-kernel, linux-phy,
linux-mmc, Nitin Rawat, Pradeep Pragallapati, Komal Bajaj
On Fri, Sep 11, 2026 at 03:09:30PM +0530, Monish Chunara wrote:
> This is v5 of the Shikra SD Card support series.
>
> This series adds SD card support for the Shikra platform.
>
> The first patch adds the SDHC2 controller node and the necessary pinctrl
> configurations to the base Shikra SoC dtsi. The second patch enables
> this support on the Shikra EVK (CQS, CQM, and IQS variants) by defining
> the regulator supplies and the card detection GPIO.
>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
I don't understand how you managed to send patch 1 alone and then 2 and
3 in a series...
Please stop doing your own thing and adopt b4!
I'll put these 3 patches in the recyle bin for now, please rebase,
retest and resubmit.
Regards,
Bjorn
>
> Changes in v5:
> - Rebased on top of latest linux-next
> - Fix interrupts-cells to 4 for sdhc_2 (sashiko-bot)
> - Moved gpio include directive into shikra-evk.dtsi (sashiko-bot)
> - Link to v4: https://lore.kernel.org/all/20260804122054.3462145-1-monish.chunara@oss.qualcomm.com/
>
> Changes in v4:
> - Rebase on latest code base
> - Collect Reviewed-by tags (Konrad)
> - Drop the dependency link - since all base changes are merged
> - Link to v3: https://lore.kernel.org/all/20260702073354.3641966-1-monish.chunara@oss.qualcomm.com/
>
> Changes in v3:
> - Padded the address part of the reg property in the sdhc_2 node to
> 8 hex digits with leading zeroes for consistency with other nodes
> in the file
> - Moved the common sdhc_2 properties to shikra-evk DT file
> - Link to v2: https://lore.kernel.org/all/20260630165700.1886608-1-monish.chunara@oss.qualcomm.com
>
> Changes in v2:
> - Rectify the alignment for clocks and interconnect properties for SD
> card
> - Link to v1: https://lore.kernel.org/all/20260604122045.494712-1-monish.chunara@oss.qualcomm.com
>
> Testing:
> - Validated on Shikra EVK variants.
>
> Monish Chunara (2):
> arm64: dts: qcom: Add SD Card support for Shikra SoC
> arm64: dts: qcom: Enable SD card for Shikra EVK
>
> arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 9 ++
> arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 9 ++
> arch/arm64/boot/dts/qcom/shikra-evk.dtsi | 11 +++
> arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 9 ++
> arch/arm64/boot/dts/qcom/shikra.dtsi | 97 +++++++++++++++++++++
> 5 files changed, 135 insertions(+)
>
> --
> 2.34.1
>
> --- b4-submit-tracking ---
> {
> "series": {
> "revision": 5,
> "change-id": "20260911-shikra-sd-card-61d428639de0",
> "prefixes": [],
> "from-thread": "20260804122054.3462145-1-monish.chunara@oss.qualcomm.com"
> }
> }
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH] arm64: dts: qcom: Shikra SD Card support
@ 2026-09-25 20:27 ` Bjorn Andersson
0 siblings, 0 replies; 16+ messages in thread
From: Bjorn Andersson @ 2026-09-25 20:27 UTC (permalink / raw)
To: Monish Chunara
Cc: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Vinod Koul, Neil Armstrong, Wesley Cheng, Ulf Hansson,
Kernel Team, linux-arm-msm, devicetree, linux-kernel, linux-phy,
linux-mmc, Nitin Rawat, Pradeep Pragallapati, Komal Bajaj
On Fri, Sep 11, 2026 at 03:09:30PM +0530, Monish Chunara wrote:
> This is v5 of the Shikra SD Card support series.
>
> This series adds SD card support for the Shikra platform.
>
> The first patch adds the SDHC2 controller node and the necessary pinctrl
> configurations to the base Shikra SoC dtsi. The second patch enables
> this support on the Shikra EVK (CQS, CQM, and IQS variants) by defining
> the regulator supplies and the card detection GPIO.
>
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
I don't understand how you managed to send patch 1 alone and then 2 and
3 in a series...
Please stop doing your own thing and adopt b4!
I'll put these 3 patches in the recyle bin for now, please rebase,
retest and resubmit.
Regards,
Bjorn
>
> Changes in v5:
> - Rebased on top of latest linux-next
> - Fix interrupts-cells to 4 for sdhc_2 (sashiko-bot)
> - Moved gpio include directive into shikra-evk.dtsi (sashiko-bot)
> - Link to v4: https://lore.kernel.org/all/20260804122054.3462145-1-monish.chunara@oss.qualcomm.com/
>
> Changes in v4:
> - Rebase on latest code base
> - Collect Reviewed-by tags (Konrad)
> - Drop the dependency link - since all base changes are merged
> - Link to v3: https://lore.kernel.org/all/20260702073354.3641966-1-monish.chunara@oss.qualcomm.com/
>
> Changes in v3:
> - Padded the address part of the reg property in the sdhc_2 node to
> 8 hex digits with leading zeroes for consistency with other nodes
> in the file
> - Moved the common sdhc_2 properties to shikra-evk DT file
> - Link to v2: https://lore.kernel.org/all/20260630165700.1886608-1-monish.chunara@oss.qualcomm.com
>
> Changes in v2:
> - Rectify the alignment for clocks and interconnect properties for SD
> card
> - Link to v1: https://lore.kernel.org/all/20260604122045.494712-1-monish.chunara@oss.qualcomm.com
>
> Testing:
> - Validated on Shikra EVK variants.
>
> Monish Chunara (2):
> arm64: dts: qcom: Add SD Card support for Shikra SoC
> arm64: dts: qcom: Enable SD card for Shikra EVK
>
> arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 9 ++
> arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 9 ++
> arch/arm64/boot/dts/qcom/shikra-evk.dtsi | 11 +++
> arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 9 ++
> arch/arm64/boot/dts/qcom/shikra.dtsi | 97 +++++++++++++++++++++
> 5 files changed, 135 insertions(+)
>
> --
> 2.34.1
>
> --- b4-submit-tracking ---
> {
> "series": {
> "revision": 5,
> "change-id": "20260911-shikra-sd-card-61d428639de0",
> "prefixes": [],
> "from-thread": "20260804122054.3462145-1-monish.chunara@oss.qualcomm.com"
> }
> }
> --
> 2.34.1
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 16+ messages in thread