* [PATCH v3] staging: greybus: replace PTR_ERR() with %pe in error messages
@ 2026-10-15 1:56 pavankumaryalagada
2026-10-15 2:21 ` Julia Lawall
0 siblings, 1 reply; 3+ messages in thread
From: pavankumaryalagada @ 2026-10-15 1:56 UTC (permalink / raw)
To: johan, gregkh
Cc: vireshk, elder, greybus-dev, linux-staging, linux-kernel,
outreachy, Yalagada Pavan Kumar
From: Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>
Use %pe to print error pointers directly and display their
error names.
Keep PTR_ERR() calls when the numeric error value is needed
for returning the error code.
Signed-off-by: Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>
---
v3:
- Extend the %pe conversion throughout Greybus, as suggested by Alex Elder.
v2:
- Use %pe in the firmware management case, as suggested by Jeremy Clifton,
to match the other cases.
v1: https://lore.kernel.org/outreachy/as0nhVbagZa8Birm@user/T/#t
---
drivers/staging/greybus/arche-apb-ctrl.c | 18 +++++++++---------
drivers/staging/greybus/arche-platform.c | 8 ++++----
drivers/staging/greybus/fw-core.c | 16 ++++++++--------
drivers/staging/greybus/uart.c | 2 +-
4 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/greybus/arche-apb-ctrl.c b/drivers/staging/greybus/arche-apb-ctrl.c
index 4302c2226126..fa4d2d88dc3f 100644
--- a/drivers/staging/greybus/arche-apb-ctrl.c
+++ b/drivers/staging/greybus/arche-apb-ctrl.c
@@ -145,8 +145,8 @@ static int fw_flashing_seq(struct platform_device *pdev)
apb->spi_en = devm_gpiod_get(dev, "spi-en", flags);
if (IS_ERR(apb->spi_en)) {
ret = PTR_ERR(apb->spi_en);
- dev_err(dev, "Failed requesting SPI bus en GPIO: %d\n",
- ret);
+ dev_err(dev, "Failed requesting SPI bus en GPIO: %pe\n",
+ apb->spi_en);
return ret;
}
}
@@ -323,14 +323,14 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
apb->resetn = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(apb->resetn)) {
ret = PTR_ERR(apb->resetn);
- dev_err(dev, "Failed requesting reset GPIO: %d\n", ret);
+ dev_err(dev, "Failed requesting reset GPIO: %pe\n", apb->resetn);
return ret;
}
apb->boot_ret = devm_gpiod_get(dev, "boot-ret", GPIOD_OUT_LOW);
if (IS_ERR(apb->boot_ret)) {
ret = PTR_ERR(apb->boot_ret);
- dev_err(dev, "Failed requesting bootret GPIO: %d\n", ret);
+ dev_err(dev, "Failed requesting bootret GPIO: %pe\n", apb->boot_ret);
return ret;
}
@@ -338,7 +338,7 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
apb->pwroff = devm_gpiod_get_optional(dev, "pwr-off", GPIOD_IN);
if (IS_ERR(apb->pwroff)) {
ret = PTR_ERR(apb->pwroff);
- dev_err(dev, "Failed requesting pwroff_n GPIO: %d\n", ret);
+ dev_err(dev, "Failed requesting pwroff_n GPIO: %pe\n", apb->pwroff);
return ret;
}
@@ -346,14 +346,14 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
apb->clk_en = devm_gpiod_get_optional(dev, "clock-en", GPIOD_OUT_LOW);
if (IS_ERR(apb->clk_en)) {
ret = PTR_ERR(apb->clk_en);
- dev_err(dev, "Failed requesting APB clock en GPIO: %d\n", ret);
+ dev_err(dev, "Failed requesting APB clock en GPIO: %pe\n", apb->clk_en);
return ret;
}
apb->pwrdn = devm_gpiod_get(dev, "pwr-down", GPIOD_OUT_LOW);
if (IS_ERR(apb->pwrdn)) {
ret = PTR_ERR(apb->pwrdn);
- dev_warn(dev, "Failed requesting power down GPIO: %d\n", ret);
+ dev_warn(dev, "Failed requesting power down GPIO: %pe\n", apb->pwrdn);
return ret;
}
@@ -368,12 +368,12 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
apb->pinctrl = devm_pinctrl_get(&pdev->dev);
if (IS_ERR(apb->pinctrl)) {
- dev_err(&pdev->dev, "could not get pinctrl handle\n");
+ dev_err(&pdev->dev, "could not get pinctrl handle: %pe\n", apb->pinctrl);
return PTR_ERR(apb->pinctrl);
}
apb->pin_default = pinctrl_lookup_state(apb->pinctrl, "default");
if (IS_ERR(apb->pin_default)) {
- dev_err(&pdev->dev, "could not get default pin state\n");
+ dev_err(&pdev->dev, "could not get default pin state: %pe\n", apb->pin_default);
return PTR_ERR(apb->pin_default);
}
diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c
index de5de59ea8ab..a97ac59c6f01 100644
--- a/drivers/staging/greybus/arche-platform.c
+++ b/drivers/staging/greybus/arche-platform.c
@@ -445,7 +445,7 @@ static int arche_platform_probe(struct platform_device *pdev)
arche_pdata->svc_reset = devm_gpiod_get(dev, "svc,reset", flags);
if (IS_ERR(arche_pdata->svc_reset)) {
ret = PTR_ERR(arche_pdata->svc_reset);
- dev_err(dev, "failed to request svc-reset GPIO: %d\n", ret);
+ dev_err(dev, "failed to request svc-reset GPIO: %pe\n", arche_pdata->svc_reset);
return ret;
}
arche_platform_set_state(arche_pdata, ARCHE_PLATFORM_STATE_OFF);
@@ -454,7 +454,7 @@ static int arche_platform_probe(struct platform_device *pdev)
GPIOD_OUT_LOW);
if (IS_ERR(arche_pdata->svc_sysboot)) {
ret = PTR_ERR(arche_pdata->svc_sysboot);
- dev_err(dev, "failed to request sysboot0 GPIO: %d\n", ret);
+ dev_err(dev, "failed to request sysboot0 GPIO: %pe\n", arche_pdata->svc_sysboot);
return ret;
}
@@ -471,7 +471,7 @@ static int arche_platform_probe(struct platform_device *pdev)
arche_pdata->svc_ref_clk = devm_clk_get(dev, "svc_ref_clk");
if (IS_ERR(arche_pdata->svc_ref_clk)) {
ret = PTR_ERR(arche_pdata->svc_ref_clk);
- dev_err(dev, "failed to get svc_ref_clk: %d\n", ret);
+ dev_err(dev, "failed to get svc_ref_clk: %pe\n", arche_pdata->svc_ref_clk);
return ret;
}
@@ -484,7 +484,7 @@ static int arche_platform_probe(struct platform_device *pdev)
GPIOD_IN);
if (IS_ERR(arche_pdata->wake_detect)) {
ret = PTR_ERR(arche_pdata->wake_detect);
- dev_err(dev, "Failed requesting wake_detect GPIO: %d\n", ret);
+ dev_err(dev, "Failed requesting wake_detect GPIO: %pe\n", arche_pdata->wake_detect);
return ret;
}
diff --git a/drivers/staging/greybus/fw-core.c b/drivers/staging/greybus/fw-core.c
index 2016a74f137f..78321be80013 100644
--- a/drivers/staging/greybus/fw-core.c
+++ b/drivers/staging/greybus/fw-core.c
@@ -93,8 +93,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
if (IS_ERR(connection)) {
ret = PTR_ERR(connection);
dev_err(&bundle->dev,
- "failed to create management connection (%d)\n",
- ret);
+ "failed to create management connection (%pe)\n",
+ connection);
goto err_destroy_connections;
}
@@ -112,8 +112,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
connection = gb_connection_create(bundle, cport_id,
gb_fw_download_request_handler);
if (IS_ERR(connection)) {
- dev_err(&bundle->dev, "failed to create download connection (%ld)\n",
- PTR_ERR(connection));
+ dev_err(&bundle->dev, "failed to create download connection (%pe)\n",
+ connection);
} else {
fw_core->download_connection = connection;
}
@@ -131,8 +131,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
connection = gb_connection_create(bundle, cport_id,
NULL);
if (IS_ERR(connection)) {
- dev_err(&bundle->dev, "failed to create SPI connection (%ld)\n",
- PTR_ERR(connection));
+ dev_err(&bundle->dev, "failed to create SPI connection (%pe)\n",
+ connection);
} else {
fw_core->spi_connection = connection;
}
@@ -149,8 +149,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
connection = gb_connection_create(bundle, cport_id,
NULL);
if (IS_ERR(connection)) {
- dev_err(&bundle->dev, "failed to create Authentication connection (%ld)\n",
- PTR_ERR(connection));
+ dev_err(&bundle->dev, "failed to create Authentication connection (%pe)\n",
+ connection);
} else {
fw_core->cap_connection = connection;
}
diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index 172cf900eaf0..59a112cf47a0 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -951,7 +951,7 @@ static int gb_tty_init(void)
TTY_DRIVER_DYNAMIC_DEV |
TTY_DRIVER_RESET_SAVED_TERMIOS);
if (IS_ERR(gb_tty_driver)) {
- pr_err("Can not allocate tty driver\n");
+ pr_err("Can not allocate tty driver: %pe\n", gb_tty_driver);
retval = PTR_ERR(gb_tty_driver);
goto fail_unregister_dev;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v3] staging: greybus: replace PTR_ERR() with %pe in error messages
2026-10-15 1:56 [PATCH v3] staging: greybus: replace PTR_ERR() with %pe in error messages pavankumaryalagada
@ 2026-10-15 2:21 ` Julia Lawall
2026-10-15 4:53 ` Yalagada Pavan Kumar
0 siblings, 1 reply; 3+ messages in thread
From: Julia Lawall @ 2026-10-15 2:21 UTC (permalink / raw)
To: Yalagada Pavan Kumar
Cc: johan, gregkh, vireshk, elder, greybus-dev, linux-staging,
linux-kernel, outreachy
On Thu, 15 Oct 2026, pavankumaryalagada@gmail.com wrote:
> From: Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>
>
> Use %pe to print error pointers directly and display their
> error names.
>
> Keep PTR_ERR() calls when the numeric error value is needed
> for returning the error code.
>
> Signed-off-by: Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>
> ---
> v3:
> - Extend the %pe conversion throughout Greybus, as suggested by Alex Elder.
>
> v2:
> - Use %pe in the firmware management case, as suggested by Jeremy Clifton,
> to match the other cases.
>
> v1: https://lore.kernel.org/outreachy/as0nhVbagZa8Birm@user/T/#t
> ---
> drivers/staging/greybus/arche-apb-ctrl.c | 18 +++++++++---------
> drivers/staging/greybus/arche-platform.c | 8 ++++----
> drivers/staging/greybus/fw-core.c | 16 ++++++++--------
> drivers/staging/greybus/uart.c | 2 +-
> 4 files changed, 22 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/staging/greybus/arche-apb-ctrl.c b/drivers/staging/greybus/arche-apb-ctrl.c
> index 4302c2226126..fa4d2d88dc3f 100644
> --- a/drivers/staging/greybus/arche-apb-ctrl.c
> +++ b/drivers/staging/greybus/arche-apb-ctrl.c
> @@ -145,8 +145,8 @@ static int fw_flashing_seq(struct platform_device *pdev)
> apb->spi_en = devm_gpiod_get(dev, "spi-en", flags);
> if (IS_ERR(apb->spi_en)) {
> ret = PTR_ERR(apb->spi_en);
> - dev_err(dev, "Failed requesting SPI bus en GPIO: %d\n",
> - ret);
> + dev_err(dev, "Failed requesting SPI bus en GPIO: %pe\n",
> + apb->spi_en);
> return ret;
Maybe it's for after this series gets accepted, but you don't really need
to initialize ret here. You can just return PTR_ERR(apb->spi_en).
You can also check whether the ret variable is needed at all in this
function (I don't know).
> }
> }
> @@ -323,14 +323,14 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
> apb->resetn = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> if (IS_ERR(apb->resetn)) {
> ret = PTR_ERR(apb->resetn);
> - dev_err(dev, "Failed requesting reset GPIO: %d\n", ret);
> + dev_err(dev, "Failed requesting reset GPIO: %pe\n", apb->resetn);
> return ret;
> }
>
> apb->boot_ret = devm_gpiod_get(dev, "boot-ret", GPIOD_OUT_LOW);
> if (IS_ERR(apb->boot_ret)) {
> ret = PTR_ERR(apb->boot_ret);
> - dev_err(dev, "Failed requesting bootret GPIO: %d\n", ret);
> + dev_err(dev, "Failed requesting bootret GPIO: %pe\n", apb->boot_ret);
> return ret;
> }
Same here and in the subsequent ones.
> @@ -338,7 +338,7 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
> apb->pwroff = devm_gpiod_get_optional(dev, "pwr-off", GPIOD_IN);
> if (IS_ERR(apb->pwroff)) {
> ret = PTR_ERR(apb->pwroff);
> - dev_err(dev, "Failed requesting pwroff_n GPIO: %d\n", ret);
> + dev_err(dev, "Failed requesting pwroff_n GPIO: %pe\n", apb->pwroff);
> return ret;
> }
>
> @@ -346,14 +346,14 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
> apb->clk_en = devm_gpiod_get_optional(dev, "clock-en", GPIOD_OUT_LOW);
> if (IS_ERR(apb->clk_en)) {
> ret = PTR_ERR(apb->clk_en);
> - dev_err(dev, "Failed requesting APB clock en GPIO: %d\n", ret);
> + dev_err(dev, "Failed requesting APB clock en GPIO: %pe\n", apb->clk_en);
> return ret;
> }
>
> apb->pwrdn = devm_gpiod_get(dev, "pwr-down", GPIOD_OUT_LOW);
> if (IS_ERR(apb->pwrdn)) {
> ret = PTR_ERR(apb->pwrdn);
> - dev_warn(dev, "Failed requesting power down GPIO: %d\n", ret);
> + dev_warn(dev, "Failed requesting power down GPIO: %pe\n", apb->pwrdn);
> return ret;
> }
>
> @@ -368,12 +368,12 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
>
> apb->pinctrl = devm_pinctrl_get(&pdev->dev);
> if (IS_ERR(apb->pinctrl)) {
> - dev_err(&pdev->dev, "could not get pinctrl handle\n");
> + dev_err(&pdev->dev, "could not get pinctrl handle: %pe\n", apb->pinctrl);
> return PTR_ERR(apb->pinctrl);
> }
> apb->pin_default = pinctrl_lookup_state(apb->pinctrl, "default");
> if (IS_ERR(apb->pin_default)) {
> - dev_err(&pdev->dev, "could not get default pin state\n");
> + dev_err(&pdev->dev, "could not get default pin state: %pe\n", apb->pin_default);
> return PTR_ERR(apb->pin_default);
> }
These two are different from the others.
julia
> diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c
> index de5de59ea8ab..a97ac59c6f01 100644
> --- a/drivers/staging/greybus/arche-platform.c
> +++ b/drivers/staging/greybus/arche-platform.c
> @@ -445,7 +445,7 @@ static int arche_platform_probe(struct platform_device *pdev)
> arche_pdata->svc_reset = devm_gpiod_get(dev, "svc,reset", flags);
> if (IS_ERR(arche_pdata->svc_reset)) {
> ret = PTR_ERR(arche_pdata->svc_reset);
> - dev_err(dev, "failed to request svc-reset GPIO: %d\n", ret);
> + dev_err(dev, "failed to request svc-reset GPIO: %pe\n", arche_pdata->svc_reset);
> return ret;
> }
> arche_platform_set_state(arche_pdata, ARCHE_PLATFORM_STATE_OFF);
> @@ -454,7 +454,7 @@ static int arche_platform_probe(struct platform_device *pdev)
> GPIOD_OUT_LOW);
> if (IS_ERR(arche_pdata->svc_sysboot)) {
> ret = PTR_ERR(arche_pdata->svc_sysboot);
> - dev_err(dev, "failed to request sysboot0 GPIO: %d\n", ret);
> + dev_err(dev, "failed to request sysboot0 GPIO: %pe\n", arche_pdata->svc_sysboot);
> return ret;
> }
>
> @@ -471,7 +471,7 @@ static int arche_platform_probe(struct platform_device *pdev)
> arche_pdata->svc_ref_clk = devm_clk_get(dev, "svc_ref_clk");
> if (IS_ERR(arche_pdata->svc_ref_clk)) {
> ret = PTR_ERR(arche_pdata->svc_ref_clk);
> - dev_err(dev, "failed to get svc_ref_clk: %d\n", ret);
> + dev_err(dev, "failed to get svc_ref_clk: %pe\n", arche_pdata->svc_ref_clk);
> return ret;
> }
>
> @@ -484,7 +484,7 @@ static int arche_platform_probe(struct platform_device *pdev)
> GPIOD_IN);
> if (IS_ERR(arche_pdata->wake_detect)) {
> ret = PTR_ERR(arche_pdata->wake_detect);
> - dev_err(dev, "Failed requesting wake_detect GPIO: %d\n", ret);
> + dev_err(dev, "Failed requesting wake_detect GPIO: %pe\n", arche_pdata->wake_detect);
> return ret;
> }
>
> diff --git a/drivers/staging/greybus/fw-core.c b/drivers/staging/greybus/fw-core.c
> index 2016a74f137f..78321be80013 100644
> --- a/drivers/staging/greybus/fw-core.c
> +++ b/drivers/staging/greybus/fw-core.c
> @@ -93,8 +93,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
> if (IS_ERR(connection)) {
> ret = PTR_ERR(connection);
> dev_err(&bundle->dev,
> - "failed to create management connection (%d)\n",
> - ret);
> + "failed to create management connection (%pe)\n",
> + connection);
> goto err_destroy_connections;
> }
>
> @@ -112,8 +112,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
> connection = gb_connection_create(bundle, cport_id,
> gb_fw_download_request_handler);
> if (IS_ERR(connection)) {
> - dev_err(&bundle->dev, "failed to create download connection (%ld)\n",
> - PTR_ERR(connection));
> + dev_err(&bundle->dev, "failed to create download connection (%pe)\n",
> + connection);
> } else {
> fw_core->download_connection = connection;
> }
> @@ -131,8 +131,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
> connection = gb_connection_create(bundle, cport_id,
> NULL);
> if (IS_ERR(connection)) {
> - dev_err(&bundle->dev, "failed to create SPI connection (%ld)\n",
> - PTR_ERR(connection));
> + dev_err(&bundle->dev, "failed to create SPI connection (%pe)\n",
> + connection);
> } else {
> fw_core->spi_connection = connection;
> }
> @@ -149,8 +149,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
> connection = gb_connection_create(bundle, cport_id,
> NULL);
> if (IS_ERR(connection)) {
> - dev_err(&bundle->dev, "failed to create Authentication connection (%ld)\n",
> - PTR_ERR(connection));
> + dev_err(&bundle->dev, "failed to create Authentication connection (%pe)\n",
> + connection);
> } else {
> fw_core->cap_connection = connection;
> }
> diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
> index 172cf900eaf0..59a112cf47a0 100644
> --- a/drivers/staging/greybus/uart.c
> +++ b/drivers/staging/greybus/uart.c
> @@ -951,7 +951,7 @@ static int gb_tty_init(void)
> TTY_DRIVER_DYNAMIC_DEV |
> TTY_DRIVER_RESET_SAVED_TERMIOS);
> if (IS_ERR(gb_tty_driver)) {
> - pr_err("Can not allocate tty driver\n");
> + pr_err("Can not allocate tty driver: %pe\n", gb_tty_driver);
> retval = PTR_ERR(gb_tty_driver);
> goto fail_unregister_dev;
> }
> --
> 2.43.0
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v3] staging: greybus: replace PTR_ERR() with %pe in error messages
2026-10-15 2:21 ` Julia Lawall
@ 2026-10-15 4:53 ` Yalagada Pavan Kumar
0 siblings, 0 replies; 3+ messages in thread
From: Yalagada Pavan Kumar @ 2026-10-15 4:53 UTC (permalink / raw)
To: Julia Lawall
Cc: johan, gregkh, vireshk, elder, greybus-dev, linux-staging,
linux-kernel, outreachy
On Wed, Oct 14, 2026 at 10:21:22PM -0400, Julia Lawall wrote:
>
>
> On Thu, 15 Oct 2026, pavankumaryalagada@gmail.com wrote:
>
> > From: Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>
> >
> > Use %pe to print error pointers directly and display their
> > error names.
> >
> > Keep PTR_ERR() calls when the numeric error value is needed
> > for returning the error code.
> >
> > Signed-off-by: Yalagada Pavan Kumar <pavankumaryalagada@gmail.com>
> > ---
> > v3:
> > - Extend the %pe conversion throughout Greybus, as suggested by Alex Elder.
> >
> > v2:
> > - Use %pe in the firmware management case, as suggested by Jeremy Clifton,
> > to match the other cases.
> >
> > v1: https://lore.kernel.org/outreachy/as0nhVbagZa8Birm@user/T/#t
> > ---
> > drivers/staging/greybus/arche-apb-ctrl.c | 18 +++++++++---------
> > drivers/staging/greybus/arche-platform.c | 8 ++++----
> > drivers/staging/greybus/fw-core.c | 16 ++++++++--------
> > drivers/staging/greybus/uart.c | 2 +-
> > 4 files changed, 22 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/staging/greybus/arche-apb-ctrl.c b/drivers/staging/greybus/arche-apb-ctrl.c
> > index 4302c2226126..fa4d2d88dc3f 100644
> > --- a/drivers/staging/greybus/arche-apb-ctrl.c
> > +++ b/drivers/staging/greybus/arche-apb-ctrl.c
> > @@ -145,8 +145,8 @@ static int fw_flashing_seq(struct platform_device *pdev)
> > apb->spi_en = devm_gpiod_get(dev, "spi-en", flags);
> > if (IS_ERR(apb->spi_en)) {
> > ret = PTR_ERR(apb->spi_en);
> > - dev_err(dev, "Failed requesting SPI bus en GPIO: %d\n",
> > - ret);
> > + dev_err(dev, "Failed requesting SPI bus en GPIO: %pe\n",
> > + apb->spi_en);
> > return ret;
>
> Maybe it's for after this series gets accepted, but you don't really need
> to initialize ret here. You can just return PTR_ERR(apb->spi_en).
I'll return PTR_ERR() directly where possible and keep ret assignments
where the value is needed for further error handling.
>
> You can also check whether the ret variable is needed at all in this
> function (I don't know).
I'll keep ret in fw_flashing_seq() since it's used for regulator operations,
and remove it from apb_ctrl_get_fw_data() since it's only used for returning
error codes.
Thanks,
Pavan
>
> > }
> > }
> > @@ -323,14 +323,14 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
> > apb->resetn = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > if (IS_ERR(apb->resetn)) {
> > ret = PTR_ERR(apb->resetn);
> > - dev_err(dev, "Failed requesting reset GPIO: %d\n", ret);
> > + dev_err(dev, "Failed requesting reset GPIO: %pe\n", apb->resetn);
> > return ret;
> > }
> >
> > apb->boot_ret = devm_gpiod_get(dev, "boot-ret", GPIOD_OUT_LOW);
> > if (IS_ERR(apb->boot_ret)) {
> > ret = PTR_ERR(apb->boot_ret);
> > - dev_err(dev, "Failed requesting bootret GPIO: %d\n", ret);
> > + dev_err(dev, "Failed requesting bootret GPIO: %pe\n", apb->boot_ret);
> > return ret;
> > }
>
> Same here and in the subsequent ones.
>
> > @@ -338,7 +338,7 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
> > apb->pwroff = devm_gpiod_get_optional(dev, "pwr-off", GPIOD_IN);
> > if (IS_ERR(apb->pwroff)) {
> > ret = PTR_ERR(apb->pwroff);
> > - dev_err(dev, "Failed requesting pwroff_n GPIO: %d\n", ret);
> > + dev_err(dev, "Failed requesting pwroff_n GPIO: %pe\n", apb->pwroff);
> > return ret;
> > }
> >
> > @@ -346,14 +346,14 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
> > apb->clk_en = devm_gpiod_get_optional(dev, "clock-en", GPIOD_OUT_LOW);
> > if (IS_ERR(apb->clk_en)) {
> > ret = PTR_ERR(apb->clk_en);
> > - dev_err(dev, "Failed requesting APB clock en GPIO: %d\n", ret);
> > + dev_err(dev, "Failed requesting APB clock en GPIO: %pe\n", apb->clk_en);
> > return ret;
> > }
> >
> > apb->pwrdn = devm_gpiod_get(dev, "pwr-down", GPIOD_OUT_LOW);
> > if (IS_ERR(apb->pwrdn)) {
> > ret = PTR_ERR(apb->pwrdn);
> > - dev_warn(dev, "Failed requesting power down GPIO: %d\n", ret);
> > + dev_warn(dev, "Failed requesting power down GPIO: %pe\n", apb->pwrdn);
> > return ret;
> > }
> >
> > @@ -368,12 +368,12 @@ static int apb_ctrl_get_fw_data(struct platform_device *pdev,
> >
> > apb->pinctrl = devm_pinctrl_get(&pdev->dev);
> > if (IS_ERR(apb->pinctrl)) {
> > - dev_err(&pdev->dev, "could not get pinctrl handle\n");
> > + dev_err(&pdev->dev, "could not get pinctrl handle: %pe\n", apb->pinctrl);
> > return PTR_ERR(apb->pinctrl);
> > }
> > apb->pin_default = pinctrl_lookup_state(apb->pinctrl, "default");
> > if (IS_ERR(apb->pin_default)) {
> > - dev_err(&pdev->dev, "could not get default pin state\n");
> > + dev_err(&pdev->dev, "could not get default pin state: %pe\n", apb->pin_default);
> > return PTR_ERR(apb->pin_default);
> > }
>
> These two are different from the others.
>
> julia
>
> > diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c
> > index de5de59ea8ab..a97ac59c6f01 100644
> > --- a/drivers/staging/greybus/arche-platform.c
> > +++ b/drivers/staging/greybus/arche-platform.c
> > @@ -445,7 +445,7 @@ static int arche_platform_probe(struct platform_device *pdev)
> > arche_pdata->svc_reset = devm_gpiod_get(dev, "svc,reset", flags);
> > if (IS_ERR(arche_pdata->svc_reset)) {
> > ret = PTR_ERR(arche_pdata->svc_reset);
> > - dev_err(dev, "failed to request svc-reset GPIO: %d\n", ret);
> > + dev_err(dev, "failed to request svc-reset GPIO: %pe\n", arche_pdata->svc_reset);
> > return ret;
> > }
> > arche_platform_set_state(arche_pdata, ARCHE_PLATFORM_STATE_OFF);
> > @@ -454,7 +454,7 @@ static int arche_platform_probe(struct platform_device *pdev)
> > GPIOD_OUT_LOW);
> > if (IS_ERR(arche_pdata->svc_sysboot)) {
> > ret = PTR_ERR(arche_pdata->svc_sysboot);
> > - dev_err(dev, "failed to request sysboot0 GPIO: %d\n", ret);
> > + dev_err(dev, "failed to request sysboot0 GPIO: %pe\n", arche_pdata->svc_sysboot);
> > return ret;
> > }
> >
> > @@ -471,7 +471,7 @@ static int arche_platform_probe(struct platform_device *pdev)
> > arche_pdata->svc_ref_clk = devm_clk_get(dev, "svc_ref_clk");
> > if (IS_ERR(arche_pdata->svc_ref_clk)) {
> > ret = PTR_ERR(arche_pdata->svc_ref_clk);
> > - dev_err(dev, "failed to get svc_ref_clk: %d\n", ret);
> > + dev_err(dev, "failed to get svc_ref_clk: %pe\n", arche_pdata->svc_ref_clk);
> > return ret;
> > }
> >
> > @@ -484,7 +484,7 @@ static int arche_platform_probe(struct platform_device *pdev)
> > GPIOD_IN);
> > if (IS_ERR(arche_pdata->wake_detect)) {
> > ret = PTR_ERR(arche_pdata->wake_detect);
> > - dev_err(dev, "Failed requesting wake_detect GPIO: %d\n", ret);
> > + dev_err(dev, "Failed requesting wake_detect GPIO: %pe\n", arche_pdata->wake_detect);
> > return ret;
> > }
> >
> > diff --git a/drivers/staging/greybus/fw-core.c b/drivers/staging/greybus/fw-core.c
> > index 2016a74f137f..78321be80013 100644
> > --- a/drivers/staging/greybus/fw-core.c
> > +++ b/drivers/staging/greybus/fw-core.c
> > @@ -93,8 +93,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
> > if (IS_ERR(connection)) {
> > ret = PTR_ERR(connection);
> > dev_err(&bundle->dev,
> > - "failed to create management connection (%d)\n",
> > - ret);
> > + "failed to create management connection (%pe)\n",
> > + connection);
> > goto err_destroy_connections;
> > }
> >
> > @@ -112,8 +112,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
> > connection = gb_connection_create(bundle, cport_id,
> > gb_fw_download_request_handler);
> > if (IS_ERR(connection)) {
> > - dev_err(&bundle->dev, "failed to create download connection (%ld)\n",
> > - PTR_ERR(connection));
> > + dev_err(&bundle->dev, "failed to create download connection (%pe)\n",
> > + connection);
> > } else {
> > fw_core->download_connection = connection;
> > }
> > @@ -131,8 +131,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
> > connection = gb_connection_create(bundle, cport_id,
> > NULL);
> > if (IS_ERR(connection)) {
> > - dev_err(&bundle->dev, "failed to create SPI connection (%ld)\n",
> > - PTR_ERR(connection));
> > + dev_err(&bundle->dev, "failed to create SPI connection (%pe)\n",
> > + connection);
> > } else {
> > fw_core->spi_connection = connection;
> > }
> > @@ -149,8 +149,8 @@ static int gb_fw_core_probe(struct gb_bundle *bundle,
> > connection = gb_connection_create(bundle, cport_id,
> > NULL);
> > if (IS_ERR(connection)) {
> > - dev_err(&bundle->dev, "failed to create Authentication connection (%ld)\n",
> > - PTR_ERR(connection));
> > + dev_err(&bundle->dev, "failed to create Authentication connection (%pe)\n",
> > + connection);
> > } else {
> > fw_core->cap_connection = connection;
> > }
> > diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
> > index 172cf900eaf0..59a112cf47a0 100644
> > --- a/drivers/staging/greybus/uart.c
> > +++ b/drivers/staging/greybus/uart.c
> > @@ -951,7 +951,7 @@ static int gb_tty_init(void)
> > TTY_DRIVER_DYNAMIC_DEV |
> > TTY_DRIVER_RESET_SAVED_TERMIOS);
> > if (IS_ERR(gb_tty_driver)) {
> > - pr_err("Can not allocate tty driver\n");
> > + pr_err("Can not allocate tty driver: %pe\n", gb_tty_driver);
> > retval = PTR_ERR(gb_tty_driver);
> > goto fail_unregister_dev;
> > }
> > --
> > 2.43.0
> >
> >
> >
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-10-15 4:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-10-15 1:56 [PATCH v3] staging: greybus: replace PTR_ERR() with %pe in error messages pavankumaryalagada
2026-10-15 2:21 ` Julia Lawall
2026-10-15 4:53 ` Yalagada Pavan Kumar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.