[PATCH v2 0/3] board: sophgo: milkv_duo: enable standard boot

[PATCH v2 0/3] board: sophgo: milkv_duo: enable standard boot

[Hiago De Franco]

The Milk-V Duo (CV1800B, 64MB) does not enable CONFIG_BOOTSTD_DEFAULTS
and has no environment file, so U-Boot has no bootcmd and none of the
kernel_addr_r, fdt_addr_r, ramdisk_addr_r, ... variables required by
the extlinux bootmeth.

Enable CONFIG_BOOTSTD_DEFAULTS and add a milkv_duo.env with a memory
layout that fits into the 64MB of DRAM:

  0x80200000  kernel_addr_r       (16MB)
  0x81200000  kernel_comp_addr_r  (16MB, Image.gz decompression)
  0x82200000  fdt_addr_r
  0x82300000  scriptaddr
  0x82400000  pxefile_addr_r
  0x82500000  ramdisk_addr_r

Also reduce CONFIG_STACK_SIZE to 1MB. LMB reserves CONFIG_STACK_SIZE
below the relocated stack pointer, and the default 16MB left only about
1.4MB between ramdisk_addr_r and the reserved region. With 1MB, about
16MB are available for an initrd.

This series depends on Zhuxu Ran's "riscv: sophgo: Use upstream
devicetrees for CV18xx boards" (v5), which sets CONFIG_DEFAULT_DEVICE_TREE
to sophgo/<board>, so that fdtfile matches the Linux devicetree install
path (sophgo/cv1800b-milkv-duo.dtb and sophgo/sg2002-milkv-duo256m.dtb).

Link: https://lore.kernel.org/all/20260927-milkv-duo-upstream-dts-v5-0-7f64983e59e1@zohomail.com/

Tested on Milk-V Duo, booting Linux through "bootflow scan" and an
extlinux.conf on the SD card.

Signed-off-by: Hiago De Franco <hfranco@baylibre.com>
---
Changes in v2:
- Set CONFIG_BOOTMETH_EFI_BOOTMGR to y, as the default value.
- Updated the commit description of patch 2.
- Collected Yao Zi reviewed-by tags. 
- Link to v1: https://patch.msgid.link/20260929-milkv-duo-bootstd-v1-0-1b75c9ad6483@baylibre.com

To: u-boot@lists.u-boot-project.org
Cc: Kongyang Liu <seashell11234455@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Hiago De Franco <hfranco@baylibre.com>
Cc: Yao Zi <me@ziyao.cc>

---
Hiago De Franco (3):
      board: sophgo: milkv_duo: add environment for standard boot
      configs: milkv_duo: enable BOOTSTD_DEFAULTS
      configs: milkv_duo: reduce CONFIG_STACK_SIZE to 1MB

 board/sophgo/milkv_duo/milkv_duo.env |  8 ++++++++
 configs/milkv_duo_defconfig          | 12 +++++-------
 2 files changed, 13 insertions(+), 7 deletions(-)
---
base-commit: f8eb3469e1a17c79b047b3fd38ae820e8816a115
change-id: 20260929-milkv-duo-bootstd-14de5e4e03ef
prerequisite-change-id: 20260702-milkv-duo-upstream-dts-b54aed41fc61:v5
prerequisite-patch-id: b8e6815314b7881a02de0066232864d522c4a26c
prerequisite-patch-id: 0df1fa5db1b2bff402b429809796bad99a517483
prerequisite-patch-id: 49e1e8263cf0a5ba8d63c8b598b6382cde5284b2
prerequisite-patch-id: 86dd30e784f022f0a7bb6fbf125c9699467176d4
prerequisite-patch-id: 49070c05ecf58331ec519a57d1b82f8b2b835a89
prerequisite-patch-id: 6b6881e45cc6de6544aaa4509db21611158f4fa1
prerequisite-patch-id: 7198127d4602eeb14212087ce9bb694d84e71a4c
prerequisite-patch-id: 3a58bd8a061707ff27b8538d4897def3b595dc36
prerequisite-patch-id: 9055ea941b73e35d1e825787d7eca14ffceb8e8b
prerequisite-patch-id: 554c1487e8d596e0099677ca88eee0021b1ffbae

Best regards,
--  
Hiago

[PATCH v2 1/3] board: sophgo: milkv_duo: add environment for standard boot

[Hiago De Franco]

Add the load addresses needed by standard boot. They must fit in the
64MB of DRAM:

  kernel_addr_r       0x80200000  (16MB)
  kernel_comp_addr_r  0x81200000  (16MB)
  fdt_addr_r          0x82200000
  scriptaddr          0x82300000
  pxefile_addr_r      0x82400000
  ramdisk_addr_r      0x82500000

Reviewed-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Hiago De Franco <hfranco@baylibre.com>
---
 board/sophgo/milkv_duo/milkv_duo.env | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/board/sophgo/milkv_duo/milkv_duo.env b/board/sophgo/milkv_duo/milkv_duo.env
new file mode 100644
index 00000000000..38b972c7b57
--- /dev/null
+++ b/board/sophgo/milkv_duo/milkv_duo.env
@@ -0,0 +1,8 @@
+fdt_addr_r=0x82200000
+fdtfile=DEFAULT_DEVICE_TREE.dtb
+kernel_addr_r=0x80200000
+kernel_comp_addr_r=0x81200000
+kernel_comp_size=0x1000000
+pxefile_addr_r=0x82400000
+ramdisk_addr_r=0x82500000
+scriptaddr=0x82300000

-- 
2.53.0

[PATCH v2 2/3] configs: milkv_duo: enable BOOTSTD_DEFAULTS

[Hiago De Franco]

Enable CONFIG_BOOTSTD_DEFAULTS so the board can boot an extlinux.conf
with standard boot. This sets bootcmd to "bootflow scan" and enables
the script bootmeth, the ext4 commands and ping.

The rest of the diff comes from savedefconfig.

Reviewed-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Hiago De Franco <hfranco@baylibre.com>
---
 configs/milkv_duo_defconfig | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/configs/milkv_duo_defconfig b/configs/milkv_duo_defconfig
index f1f3930564b..8c6778442e6 100644
--- a/configs/milkv_duo_defconfig
+++ b/configs/milkv_duo_defconfig
@@ -11,18 +11,15 @@ CONFIG_TARGET_MILKV_DUO=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
 CONFIG_FIT=y
-CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_SYS_CBSIZE=512
 CONFIG_SYS_PBSIZE=544
-CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="milkv_duo# "
 CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
 CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PXE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
+# CONFIG_CMD_MII is not set
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
 CONFIG_ENV_OVERWRITE=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_CLK_SOPHGO_CV1800B=y

-- 
2.53.0

[PATCH v2 3/3] configs: milkv_duo: reduce CONFIG_STACK_SIZE to 1MB

[Hiago De Franco]

LMB reserves CONFIG_STACK_SIZE below the relocated stack pointer. The
default 16MB is a quarter of the 64MB of DRAM on this board and leaves
only about 1.4MB free above ramdisk_addr_r.

Use 1MB, as the other small memory RISC-V boards do (sipeed_maix_bitm,
sipeed_maix_smode). This is well above the 128KiB required by the UEFI
specification, and leaves about 16MB for an initrd.

Reviewed-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Hiago De Franco <hfranco@baylibre.com>
---
 configs/milkv_duo_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/milkv_duo_defconfig b/configs/milkv_duo_defconfig
index 8c6778442e6..c6c0dbb4be6 100644
--- a/configs/milkv_duo_defconfig
+++ b/configs/milkv_duo_defconfig
@@ -10,6 +10,7 @@ CONFIG_IDENT_STRING="milkv_duo"
 CONFIG_TARGET_MILKV_DUO=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
+CONFIG_STACK_SIZE=0x100000
 CONFIG_FIT=y
 CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_SYS_CBSIZE=512

-- 
2.53.0

Re: [PATCH v2 0/3] board: sophgo: milkv_duo: enable standard boot

[Hiago De Franco]

Hi Yao Zi,

On Fri, Oct 09, 2026 at 11:58:21AM -0300, Hiago De Franco wrote:
> The Milk-V Duo (CV1800B, 64MB) does not enable CONFIG_BOOTSTD_DEFAULTS
> and has no environment file, so U-Boot has no bootcmd and none of the
> kernel_addr_r, fdt_addr_r, ramdisk_addr_r, ... variables required by
> the extlinux bootmeth.
> 
> Enable CONFIG_BOOTSTD_DEFAULTS and add a milkv_duo.env with a memory
> layout that fits into the 64MB of DRAM:
> 
>   0x80200000  kernel_addr_r       (16MB)
>   0x81200000  kernel_comp_addr_r  (16MB, Image.gz decompression)
>   0x82200000  fdt_addr_r
>   0x82300000  scriptaddr
>   0x82400000  pxefile_addr_r
>   0x82500000  ramdisk_addr_r
> 
> Also reduce CONFIG_STACK_SIZE to 1MB. LMB reserves CONFIG_STACK_SIZE
> below the relocated stack pointer, and the default 16MB left only about
> 1.4MB between ramdisk_addr_r and the reserved region. With 1MB, about
> 16MB are available for an initrd.
> 
> This series depends on Zhuxu Ran's "riscv: sophgo: Use upstream
> devicetrees for CV18xx boards" (v5), which sets CONFIG_DEFAULT_DEVICE_TREE
> to sophgo/<board>, so that fdtfile matches the Linux devicetree install
> path (sophgo/cv1800b-milkv-duo.dtb and sophgo/sg2002-milkv-duo256m.dtb).
> 
> Link: https://lore.kernel.org/all/20260927-milkv-duo-upstream-dts-v5-0-7f64983e59e1@zohomail.com/
> 
> Tested on Milk-V Duo, booting Linux through "bootflow scan" and an
> extlinux.conf on the SD card.
> 
> Signed-off-by: Hiago De Franco <hfranco@baylibre.com>

just a ping about this patch, I do not know if it was picked
yet or If I should wait and rebase on v2027.01-rc1. Can you help please?

> ---
> Changes in v2:
> - Set CONFIG_BOOTMETH_EFI_BOOTMGR to y, as the default value.
> - Updated the commit description of patch 2.
> - Collected Yao Zi reviewed-by tags. 
> - Link to v1: https://patch.msgid.link/20260929-milkv-duo-bootstd-v1-0-1b75c9ad6483@baylibre.com
> 
> To: u-boot@lists.u-boot-project.org
> Cc: Kongyang Liu <seashell11234455@gmail.com>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Hiago De Franco <hfranco@baylibre.com>
> Cc: Yao Zi <me@ziyao.cc>
> 
> ---
> Hiago De Franco (3):
>       board: sophgo: milkv_duo: add environment for standard boot
>       configs: milkv_duo: enable BOOTSTD_DEFAULTS
>       configs: milkv_duo: reduce CONFIG_STACK_SIZE to 1MB
> 
>  board/sophgo/milkv_duo/milkv_duo.env |  8 ++++++++
>  configs/milkv_duo_defconfig          | 12 +++++-------
>  2 files changed, 13 insertions(+), 7 deletions(-)
> ---
> base-commit: f8eb3469e1a17c79b047b3fd38ae820e8816a115
> change-id: 20260929-milkv-duo-bootstd-14de5e4e03ef
> prerequisite-change-id: 20260702-milkv-duo-upstream-dts-b54aed41fc61:v5
> prerequisite-patch-id: b8e6815314b7881a02de0066232864d522c4a26c
> prerequisite-patch-id: 0df1fa5db1b2bff402b429809796bad99a517483
> prerequisite-patch-id: 49e1e8263cf0a5ba8d63c8b598b6382cde5284b2
> prerequisite-patch-id: 86dd30e784f022f0a7bb6fbf125c9699467176d4
> prerequisite-patch-id: 49070c05ecf58331ec519a57d1b82f8b2b835a89
> prerequisite-patch-id: 6b6881e45cc6de6544aaa4509db21611158f4fa1
> prerequisite-patch-id: 7198127d4602eeb14212087ce9bb694d84e71a4c
> prerequisite-patch-id: 3a58bd8a061707ff27b8538d4897def3b595dc36
> prerequisite-patch-id: 9055ea941b73e35d1e825787d7eca14ffceb8e8b
> prerequisite-patch-id: 554c1487e8d596e0099677ca88eee0021b1ffbae
> 
> Best regards,
> --  
> Hiago
> 

Thanks!
-- 
Hiago