[Buildroot] [PATCH 0/3] package: add qrtr, rmtfs and tqftpserv for Qualcomm modems

[Buildroot] [PATCH 0/3] package: add qrtr, rmtfs and tqftpserv for Qualcomm modems

[Igor Opaniuk via buildroot]

On Qualcomm SoCs the modem cannot finish booting without two Linux
daemons: rmtfs, which serves its EFS partitions, and tqftpserv, which
hands it the files it asks for over QRTR (on several SoCs the WLAN
firmware runs on the modem and is loaded this way). Both are built on
qrtr, the userspace library and tools for the Qualcomm IPC Router. All
three live under github.com/linux-msm; this series adds them to
Buildroot at their latest releases (qrtr 1.2, rmtfs 1.3, tqftpserv 1.3).

Notes:
- qrtr: the userspace name service (qrtr-ns) is not built, the kernel
  has had its own since Linux 5.7.
- rmtfs ships its QMI encoders pre-generated, so the qmic generator is
  not needed.
- rmtfs and tqftpserv get sysv init scripts; with systemd the upstream
  units (and the rmtfs udev rule) are installed instead.
- tqftpserv carries one patch, defining _GNU_SOURCE for asprintf() so it
  builds with uClibc-ng; it is pending upstream:
  https://github.com/linux-msm/tqftpserv/pull/56

Tested on an Arduino UNO Q (Qualcomm QRB2210) with mainline Linux: the
modem boots, its EFS is served from eMMC, it fetches its WLAN firmware
through tqftpserv and the ath10k interface associates.

Build-tested with utils/test-pkg -a (qrtr, rmtfs, tqftpserv with xz and
zstd): 26 toolchains OK, 6 skipped as expected (noMMU, static, no
threads, kernel headers < 4.15), no failures.

Signed-off-by: Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>
---
Igor Opaniuk (3):
      package/qrtr: new package
      package/rmtfs: new package
      package/tqftpserv: new package

 DEVELOPERS                                         |  5 ++
 package/Config.in                                  |  3 ++
 package/qrtr/Config.in                             | 16 ++++++
 package/qrtr/qrtr.hash                             |  4 ++
 package/qrtr/qrtr.mk                               | 14 ++++++
 package/rmtfs/Config.in                            | 17 +++++++
 package/rmtfs/S45rmtfs                             | 58 ++++++++++++++++++++++
 package/rmtfs/rmtfs.hash                           |  3 ++
 package/rmtfs/rmtfs.mk                             | 45 +++++++++++++++++
 ...translate-define-_GNU_SOURCE-for-asprintf.patch | 36 ++++++++++++++
 package/tqftpserv/Config.in                        | 14 ++++++
 package/tqftpserv/S44tqftpserv                     | 51 +++++++++++++++++++
 package/tqftpserv/tqftpserv.hash                   |  3 ++
 package/tqftpserv/tqftpserv.mk                     | 32 ++++++++++++
 14 files changed, 301 insertions(+)
---
base-commit: 4eeec84c3341715e0436e40f94b31379f227000f
change-id: 20261019-qcom-modem-userspace-940b9f49124a

Best regards,
--  
Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

[Buildroot] [PATCH 1/3] package/qrtr: new package

[Igor Opaniuk via buildroot]

Userspace for the Qualcomm IPC Router (QRTR), the transport between
Linux and the remote processors of Qualcomm SoCs: libqrtr plus the
qrtr-cfg and qrtr-lookup tools. rmtfs and tqftpserv, which the modem
needs to boot, are built on it.

The name service has been part of the kernel since Linux 5.7, so the
userspace qrtr-ns daemon (and its systemd unit) is not built.

lib/qmi.c, built into libqrtr, carries its own BSD-3-Clause notice
(The Linux Foundation, Linaro), so it is listed as a license file next
to LICENSE. The GPL-2.0 SPDX tags in the tree are on CI scripts only.

Tested on an Arduino UNO Q (Qualcomm QRB2210): qrtr-lookup lists the
modem's services after it boots.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>
---
 DEVELOPERS             |  3 +++
 package/Config.in      |  1 +
 package/qrtr/Config.in | 16 ++++++++++++++++
 package/qrtr/qrtr.hash |  4 ++++
 package/qrtr/qrtr.mk   | 14 ++++++++++++++
 5 files changed, 38 insertions(+)

diff --git a/DEVELOPERS b/DEVELOPERS
index f46d09db5a..56c919d00d 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1494,6 +1494,9 @@ F:	package/gcc-bare-metal/
 F:	package/newlib-bare-metal/
 F:	toolchain/toolchain-bare-metal-buildroot/
 
+N:	Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>
+F:	package/qrtr/
+
 N:	Ilias Apalodimas <apalos@gmail.com>
 F:	package/keepalived/
 
diff --git a/package/Config.in b/package/Config.in
index d041291bcb..9416c35458 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -588,6 +588,7 @@ endmenu
 	source "package/pru-software-support/Config.in"
 	source "package/pulseview/Config.in"
 	source "package/qoriq-cadence-dp-firmware/Config.in"
+	source "package/qrtr/Config.in"
 	source "package/rasdaemon/Config.in"
 	source "package/raspi-gpio/Config.in"
 	source "package/rdma-core/Config.in"
diff --git a/package/qrtr/Config.in b/package/qrtr/Config.in
new file mode 100644
index 0000000000..9f7584f6e4
--- /dev/null
+++ b/package/qrtr/Config.in
@@ -0,0 +1,16 @@
+config BR2_PACKAGE_QRTR
+	bool "qrtr"
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15 # linux/qrtr.h control packets
+	help
+	  Userspace for the Qualcomm IPC Router (QRTR), the transport
+	  used to talk to the remote processors (modem, ADSP, ...) of
+	  Qualcomm SoCs: the libqrtr library and the qrtr-cfg and
+	  qrtr-lookup tools.
+
+	  The QRTR name service runs in the kernel since Linux 5.7,
+	  so the userspace qrtr-ns daemon is not installed.
+
+	  https://github.com/linux-msm/qrtr
+
+comment "qrtr needs a toolchain w/ headers >= 4.15"
+	depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15
diff --git a/package/qrtr/qrtr.hash b/package/qrtr/qrtr.hash
new file mode 100644
index 0000000000..ee37272506
--- /dev/null
+++ b/package/qrtr/qrtr.hash
@@ -0,0 +1,4 @@
+# Locally calculated
+sha256  7a82bf80246fe71287b13c66c0466208822e8337fcd4aaf302eee6c5fcb48a52  qrtr-1.2.tar.gz
+sha256  e04f492e71bc5cfe131942eb127c7906d2627831ab910bb894402b476b5d7488  LICENSE
+sha256  dc5e608ed83348a1536b93877596a8bf4a32498e2b740d18f0f7b3a4951cf04b  lib/qmi.c
diff --git a/package/qrtr/qrtr.mk b/package/qrtr/qrtr.mk
new file mode 100644
index 0000000000..7bf7a491bf
--- /dev/null
+++ b/package/qrtr/qrtr.mk
@@ -0,0 +1,14 @@
+################################################################################
+#
+# qrtr
+#
+################################################################################
+
+QRTR_VERSION = 1.2
+QRTR_SITE = $(call github,linux-msm,qrtr,v$(QRTR_VERSION))
+QRTR_LICENSE = BSD-3-Clause
+QRTR_LICENSE_FILES = LICENSE lib/qmi.c
+QRTR_INSTALL_STAGING = YES
+QRTR_CONF_OPTS = -Dqrtr-ns=disabled -Dsystemd-service=disabled
+
+$(eval $(meson-package))

-- 
2.53.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

[Buildroot] [PATCH 2/3] package/rmtfs: new package

[Igor Opaniuk via buildroot]

rmtfs serves the EFS partitions of the modem of Qualcomm SoCs (modemst1,
modemst2, fsg, fsc) over QRTR and the rmtfs shared memory; without it
the modem firmware stalls during its boot.

The tarball ships the QMI encoders pre-generated, so the qmic code
generator is not needed; the .c/.h files are touched before the build
so make does not try to regenerate them. The sysv init script starts
the daemon with -P (EFS partitions by GPT label) and skips when there is
no rmtfs shared memory; RMTFS_ARGS can be overridden in
/etc/default/rmtfs (e.g. -s to let rmtfs start the modem). With systemd
the upstream unit and udev rule are installed.

Tested on an Arduino UNO Q (Qualcomm QRB2210): with sysv init the modem
boots, its EFS is served from the modemst1/modemst2/fsg partitions and
its WLAN firmware comes up.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>
---
 DEVELOPERS               |  1 +
 package/Config.in        |  1 +
 package/rmtfs/Config.in  | 17 ++++++++++++++
 package/rmtfs/S45rmtfs   | 58 ++++++++++++++++++++++++++++++++++++++++++++++++
 package/rmtfs/rmtfs.hash |  3 +++
 package/rmtfs/rmtfs.mk   | 45 +++++++++++++++++++++++++++++++++++++
 6 files changed, 125 insertions(+)

diff --git a/DEVELOPERS b/DEVELOPERS
index 56c919d00d..dc0c8f35eb 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1496,6 +1496,7 @@ F:	toolchain/toolchain-bare-metal-buildroot/
 
 N:	Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>
 F:	package/qrtr/
+F:	package/rmtfs/
 
 N:	Ilias Apalodimas <apalos@gmail.com>
 F:	package/keepalived/
diff --git a/package/Config.in b/package/Config.in
index 9416c35458..eb8cf851df 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -593,6 +593,7 @@ endmenu
 	source "package/raspi-gpio/Config.in"
 	source "package/rdma-core/Config.in"
 	source "package/read-edid/Config.in"
+	source "package/rmtfs/Config.in"
 	source "package/rng-tools/Config.in"
 	source "package/rockchip-mali/Config.in"
 	source "package/rockchip-rkbin/Config.in"
diff --git a/package/rmtfs/Config.in b/package/rmtfs/Config.in
new file mode 100644
index 0000000000..9a27f9c373
--- /dev/null
+++ b/package/rmtfs/Config.in
@@ -0,0 +1,17 @@
+config BR2_PACKAGE_RMTFS
+	bool "rmtfs"
+	depends on BR2_PACKAGE_HAS_UDEV
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15 # qrtr
+	select BR2_PACKAGE_QRTR
+	help
+	  Remote file system service for the modem of Qualcomm SoCs:
+	  serves the modem's EFS partitions (modemst1, modemst2, fsg,
+	  fsc) over QRTR and the rmtfs shared memory. Without it the
+	  modem firmware stalls at boot.
+
+	  https://github.com/linux-msm/rmtfs
+
+comment "rmtfs needs udev /dev management and a toolchain w/ threads, headers >= 4.15"
+	depends on !BR2_PACKAGE_HAS_UDEV || !BR2_TOOLCHAIN_HAS_THREADS || \
+		!BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15
diff --git a/package/rmtfs/S45rmtfs b/package/rmtfs/S45rmtfs
new file mode 100644
index 0000000000..4e110c0ae2
--- /dev/null
+++ b/package/rmtfs/S45rmtfs
@@ -0,0 +1,58 @@
+#!/bin/sh
+
+DAEMON="rmtfs"
+PIDFILE="/var/run/$DAEMON.pid"
+# -P: find the EFS partitions by GPT label; add -s to let rmtfs also
+# start the modem remoteproc, -r for read-only EFS.
+RMTFS_ARGS="-P"
+
+# shellcheck disable=SC1090
+[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
+
+start() {
+	printf 'Starting %s: ' "$DAEMON"
+	# No rmtfs shared memory: not a Qualcomm modem, nothing to serve
+	if [ ! -e /dev/qcom_rmtfs_mem1 ]; then
+		echo "SKIP"
+		return 0
+	fi
+	# shellcheck disable=SC2086 # we need the word splitting
+	start-stop-daemon -S -q -b -m -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
+		-- $RMTFS_ARGS
+	status=$?
+	if [ "$status" -eq 0 ]; then
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+	return "$status"
+}
+
+stop() {
+	printf 'Stopping %s: ' "$DAEMON"
+	start-stop-daemon -K -q -p "$PIDFILE"
+	status=$?
+	if [ "$status" -eq 0 ]; then
+		rm -f "$PIDFILE"
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+	return "$status"
+}
+
+restart() {
+	stop
+	sleep 1
+	start
+}
+
+case "$1" in
+start|stop|restart)
+	"$1";;
+reload)
+	restart;;
+*)
+	echo "Usage: $0 {start|stop|restart|reload}"
+	exit 1
+esac
diff --git a/package/rmtfs/rmtfs.hash b/package/rmtfs/rmtfs.hash
new file mode 100644
index 0000000000..680926947f
--- /dev/null
+++ b/package/rmtfs/rmtfs.hash
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256  4b6c398806a1046e2256a685d592833de0f37b7245b8adc4797e1791f0e117ee  rmtfs-1.3.tar.gz
+sha256  1e1e2972bd05841b6a009bd6f7aef9d847f9a2b721d1a308340e642faa2482cd  LICENSE
diff --git a/package/rmtfs/rmtfs.mk b/package/rmtfs/rmtfs.mk
new file mode 100644
index 0000000000..3fd21063d1
--- /dev/null
+++ b/package/rmtfs/rmtfs.mk
@@ -0,0 +1,45 @@
+################################################################################
+#
+# rmtfs
+#
+################################################################################
+
+RMTFS_VERSION = 1.3
+RMTFS_SITE = $(call github,linux-msm,rmtfs,v$(RMTFS_VERSION))
+RMTFS_LICENSE = BSD-3-Clause
+RMTFS_LICENSE_FILES = LICENSE
+RMTFS_DEPENDENCIES = qrtr udev
+
+# qmi_rmtfs.c/.h are shipped pre-generated: keep make from regenerating
+# them with qmic, which is not packaged, when the tarball timestamps make
+# qmi_rmtfs.qmi look newer.
+define RMTFS_TOUCH_GENERATED
+	touch $(@D)/qmi_rmtfs.c $(@D)/qmi_rmtfs.h
+endef
+RMTFS_PRE_BUILD_HOOKS += RMTFS_TOUCH_GENERATED
+
+# The Makefile appends the libraries to LDFLAGS, which a command-line
+# LDFLAGS would override.
+define RMTFS_BUILD_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
+		LDFLAGS="$(TARGET_LDFLAGS) -lqrtr -ludev -lpthread" \
+		-C $(@D) rmtfs rmtfs.service prefix=/usr
+endef
+
+define RMTFS_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/rmtfs $(TARGET_DIR)/usr/bin/rmtfs
+endef
+
+define RMTFS_INSTALL_INIT_SYSV
+	$(INSTALL) -D -m 0755 $(RMTFS_PKGDIR)/S45rmtfs \
+		$(TARGET_DIR)/etc/init.d/S45rmtfs
+endef
+
+define RMTFS_INSTALL_INIT_SYSTEMD
+	$(INSTALL) -D -m 0644 $(@D)/rmtfs.service \
+		$(TARGET_DIR)/usr/lib/systemd/system/rmtfs.service
+	$(INSTALL) -D -m 0644 $(@D)/rmtfs.rules \
+		$(TARGET_DIR)/usr/lib/udev/rules.d/rmtfs.rules
+endef
+
+$(eval $(generic-package))

-- 
2.53.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

[Buildroot] [PATCH 3/3] package/tqftpserv: new package

[Igor Opaniuk via buildroot]

tqftpserv is a TFTP server over QRTR: the modem of Qualcomm SoCs fetches
files from Linux through it, e.g. the WLAN firmware (wlanmdsp.mbn) on
SoCs whose WLAN firmware runs on the modem. Files are looked up next to
the remoteproc firmware under /lib/firmware; xz and zstd compressed
files are handled when those libraries are enabled.

The systemd units are installed only with systemd as init; a sysv init
script is provided otherwise.

The patch defines _GNU_SOURCE in translate.c, which calls asprintf():
uClibc-ng declares it only then, so the build failed there (test-pkg,
bootlin-armv5-uclibc). Submitted upstream as well.

Tested on an Arduino UNO Q (Qualcomm QRB2210): the modem fetches
wlanmdsp.mbn through it and the ath10k WLAN interface comes up.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>
---
 DEVELOPERS                                         |  1 +
 package/Config.in                                  |  1 +
 ...translate-define-_GNU_SOURCE-for-asprintf.patch | 36 +++++++++++++++
 package/tqftpserv/Config.in                        | 14 ++++++
 package/tqftpserv/S44tqftpserv                     | 51 ++++++++++++++++++++++
 package/tqftpserv/tqftpserv.hash                   |  3 ++
 package/tqftpserv/tqftpserv.mk                     | 32 ++++++++++++++
 7 files changed, 138 insertions(+)

diff --git a/DEVELOPERS b/DEVELOPERS
index dc0c8f35eb..2d3e525f20 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1497,6 +1497,7 @@ F:	toolchain/toolchain-bare-metal-buildroot/
 N:	Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>
 F:	package/qrtr/
 F:	package/rmtfs/
+F:	package/tqftpserv/
 
 N:	Ilias Apalodimas <apalos@gmail.com>
 F:	package/keepalived/
diff --git a/package/Config.in b/package/Config.in
index eb8cf851df..4b90333bf7 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -638,6 +638,7 @@ endmenu
 	source "package/ti-uim/Config.in"
 	source "package/ti-utils/Config.in"
 	source "package/tio/Config.in"
+	source "package/tqftpserv/Config.in"
 	source "package/triggerhappy/Config.in"
 	source "package/uboot-bootcount/Config.in"
 	source "package/uboot-tools/Config.in"
diff --git a/package/tqftpserv/0001-translate-define-_GNU_SOURCE-for-asprintf.patch b/package/tqftpserv/0001-translate-define-_GNU_SOURCE-for-asprintf.patch
new file mode 100644
index 0000000000..06829ed9be
--- /dev/null
+++ b/package/tqftpserv/0001-translate-define-_GNU_SOURCE-for-asprintf.patch
@@ -0,0 +1,36 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>
+Date: Mon, 19 Oct 2026 22:02:59 +0200
+Subject: [PATCH] translate: define _GNU_SOURCE for asprintf()
+
+asprintf() is a GNU extension. glibc and musl declare it in their
+default mode, uClibc-ng only with _GNU_SOURCE, so with uClibc-ng
+translate.c fails to build (an error with GCC 14 and later):
+
+  translate.c:298:15: error: implicit declaration of function 'asprintf'
+
+Define _GNU_SOURCE before the includes, as xz-decompress.c and
+zstd-decompress.c already do.
+
+Assisted-by: Claude:claude-opus-5-5
+Signed-off-by: Igor Opaniuk <igor.opaniuk@oss.qualcomm.com>
+Upstream: https://github.com/linux-msm/tqftpserv/pull/56
+---
+ translate.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/translate.c b/translate.c
+index 246b82d..19fdd48 100644
+--- a/translate.c
++++ b/translate.c
+@@ -2,6 +2,7 @@
+ /*
+  * Copyright (c) 2019, Linaro Ltd.
+  */
++#define _GNU_SOURCE /* asprintf() */
+ #include <sys/stat.h>
+ #include <sys/types.h>
+ #include <dirent.h>
+-- 
+2.53.0
+
diff --git a/package/tqftpserv/Config.in b/package/tqftpserv/Config.in
new file mode 100644
index 0000000000..e1acb03225
--- /dev/null
+++ b/package/tqftpserv/Config.in
@@ -0,0 +1,14 @@
+config BR2_PACKAGE_TQFTPSERV
+	bool "tqftpserv"
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15 # qrtr
+	select BR2_PACKAGE_QRTR
+	help
+	  TFTP server over QRTR for the remote processors of Qualcomm
+	  SoCs: hands the modem the files it asks for, e.g. the WLAN
+	  firmware, from /lib/firmware. Serves xz or zstd compressed
+	  files when xz or zstd is enabled.
+
+	  https://github.com/linux-msm/tqftpserv
+
+comment "tqftpserv needs a toolchain w/ headers >= 4.15"
+	depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15
diff --git a/package/tqftpserv/S44tqftpserv b/package/tqftpserv/S44tqftpserv
new file mode 100644
index 0000000000..c719cadd49
--- /dev/null
+++ b/package/tqftpserv/S44tqftpserv
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+DAEMON="tqftpserv"
+PIDFILE="/var/run/$DAEMON.pid"
+TQFTPSERV_ARGS=""
+
+# shellcheck disable=SC1090
+[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
+
+start() {
+	printf 'Starting %s: ' "$DAEMON"
+	# shellcheck disable=SC2086 # we need the word splitting
+	start-stop-daemon -S -q -b -m -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
+		-- $TQFTPSERV_ARGS
+	status=$?
+	if [ "$status" -eq 0 ]; then
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+	return "$status"
+}
+
+stop() {
+	printf 'Stopping %s: ' "$DAEMON"
+	start-stop-daemon -K -q -p "$PIDFILE"
+	status=$?
+	if [ "$status" -eq 0 ]; then
+		rm -f "$PIDFILE"
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+	return "$status"
+}
+
+restart() {
+	stop
+	sleep 1
+	start
+}
+
+case "$1" in
+start|stop|restart)
+	"$1";;
+reload)
+	restart;;
+*)
+	echo "Usage: $0 {start|stop|restart|reload}"
+	exit 1
+esac
diff --git a/package/tqftpserv/tqftpserv.hash b/package/tqftpserv/tqftpserv.hash
new file mode 100644
index 0000000000..d7660df608
--- /dev/null
+++ b/package/tqftpserv/tqftpserv.hash
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256  87a3845e8f47b42f31d8aaad04c5e0707e391b3954d096aeff6f0a03467dc33f  tqftpserv-1.3.tar.gz
+sha256  a6d7cc7891d16f9c74c9a9c2514805e59bb8758db7690bb7ae065c79cec9515a  LICENSE
diff --git a/package/tqftpserv/tqftpserv.mk b/package/tqftpserv/tqftpserv.mk
new file mode 100644
index 0000000000..a8a6220bb0
--- /dev/null
+++ b/package/tqftpserv/tqftpserv.mk
@@ -0,0 +1,32 @@
+################################################################################
+#
+# tqftpserv
+#
+################################################################################
+
+TQFTPSERV_VERSION = 1.3
+TQFTPSERV_SITE = $(call github,linux-msm,tqftpserv,v$(TQFTPSERV_VERSION))
+TQFTPSERV_LICENSE = BSD-3-Clause
+TQFTPSERV_LICENSE_FILES = LICENSE
+TQFTPSERV_DEPENDENCIES = qrtr
+
+ifeq ($(BR2_PACKAGE_XZ),y)
+TQFTPSERV_DEPENDENCIES += xz
+endif
+
+ifeq ($(BR2_PACKAGE_ZSTD),y)
+TQFTPSERV_DEPENDENCIES += zstd
+endif
+
+ifeq ($(BR2_INIT_SYSTEMD),y)
+TQFTPSERV_CONF_OPTS += -Dsystemd-unit-prefix=/usr/lib/systemd/system
+else
+TQFTPSERV_CONF_OPTS += -Dsystemd-unit-prefix=
+endif
+
+define TQFTPSERV_INSTALL_INIT_SYSV
+	$(INSTALL) -D -m 0755 $(TQFTPSERV_PKGDIR)/S44tqftpserv \
+		$(TARGET_DIR)/etc/init.d/S44tqftpserv
+endef
+
+$(eval $(meson-package))

-- 
2.53.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH 0/3] package: add qrtr, rmtfs and tqftpserv for Qualcomm modems

[Thomas Petazzoni via buildroot]

On Tue, Oct 20, 2026 at 10:07:44AM +0200, Igor Opaniuk via buildroot wrote:

> Igor Opaniuk (3):
>       package/qrtr: new package
>       package/rmtfs: new package
>       package/tqftpserv: new package

Thanks, looked super clean, so all applied. I just did one small
change on PATCH 1/3, so I'll reply to this one specifically.

Thanks!

Thomas
-- 
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH 1/3] package/qrtr: new package

[Thomas Petazzoni via buildroot]

On Tue, Oct 20, 2026 at 10:07:45AM +0200, Igor Opaniuk via buildroot wrote:

> +QRTR_VERSION = 1.2
> +QRTR_SITE = $(call github,linux-msm,qrtr,v$(QRTR_VERSION))
> +QRTR_LICENSE = BSD-3-Clause
> +QRTR_LICENSE_FILES = LICENSE lib/qmi.c

Both files carry the BSD-3-Clause license text, so I'm not sure why
adding lib/qmi.c was useful. Also, using a source file that has a
chance of being regularly modified for other reasons than the license
terms is a bit annoying, as it means we have to update its hash in our
hash file everytime there's a change to this file, even if not related
to licensing term changes.

So I've dropped the usage of lib/qmi.c as a license file. Let me know
if that is a problem.

> +QRTR_INSTALL_STAGING = YES
> +QRTR_CONF_OPTS = -Dqrtr-ns=disabled -Dsystemd-service=disabled

Curious: why isn't the systemd service enabled when
BR2_INIT_SYSTEMD=y?

Thanks!

Thomas
-- 
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot