From: Vinod Koul <vkoul@kernel.org>
To: Mattijs Korpershoek <mkorpershoek@kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Sriram Dash <quic_sriramd@quicinc.com>
Subject: Re: [PATCH v4 0/2] Add support for SA8255P in the phy-qcom-snps-femto-v2 phy driver
Date: Thu, 19 Nov 2026 19:15:03 +0530 [thread overview]
Message-ID: <av79X0gPyQDXgZwR@parshuram> (raw)
In-Reply-To: <20261027-phy-qcom-snps-femto-v2-8255-v4-0-874023825a63@kernel.org>
On 27-10-26, 14:00, Mattijs Korpershoek wrote:
> The Qualcomm automotive SA8255p SoC abstracts resources such as resets,
> clocks and regulators in firmware. The SCMI firmware exposes multiple
> protocols to control such resources which are identified by protocol_id.
>
> For this USB phy, 2 SCMI protocols are exposed by the firmware:
> * power domain management protocol (protocol_id=0x11)
> * performance domain management protocol (protocol_id=0x13)
>
> The power domain has 2 indices: 'core' and 'transfer'.
> * core controls the regulators, the clocks and the reset
> * transfer only controls the clocks
>
> For example, to power on/off the PHY, we should use the 'core' domain.
> To disable data transfer and keeping power enabled, we should use the
> 'transfer' domain.
Hey, this fails on phy/next for me, can you please rebase
--
~Vinod
WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Mattijs Korpershoek <mkorpershoek@kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Sriram Dash <quic_sriramd@quicinc.com>
Subject: Re: [PATCH v4 0/2] Add support for SA8255P in the phy-qcom-snps-femto-v2 phy driver
Date: Thu, 19 Nov 2026 19:15:03 +0530 [thread overview]
Message-ID: <av79X0gPyQDXgZwR@parshuram> (raw)
In-Reply-To: <20261027-phy-qcom-snps-femto-v2-8255-v4-0-874023825a63@kernel.org>
On 27-10-26, 14:00, Mattijs Korpershoek wrote:
> The Qualcomm automotive SA8255p SoC abstracts resources such as resets,
> clocks and regulators in firmware. The SCMI firmware exposes multiple
> protocols to control such resources which are identified by protocol_id.
>
> For this USB phy, 2 SCMI protocols are exposed by the firmware:
> * power domain management protocol (protocol_id=0x11)
> * performance domain management protocol (protocol_id=0x13)
>
> The power domain has 2 indices: 'core' and 'transfer'.
> * core controls the regulators, the clocks and the reset
> * transfer only controls the clocks
>
> For example, to power on/off the PHY, we should use the 'core' domain.
> To disable data transfer and keeping power enabled, we should use the
> 'transfer' domain.
Hey, this fails on phy/next for me, can you please rebase
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2026-11-19 13:45 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-27 13:00 [PATCH v4 0/2] Add support for SA8255P in the phy-qcom-snps-femto-v2 phy driver Mattijs Korpershoek
2026-10-27 13:00 ` Mattijs Korpershoek
2026-10-27 13:00 ` [PATCH v4 1/2] dt-bindings: phy: Add sa8255p high-speed USB PHY Mattijs Korpershoek
2026-10-27 13:00 ` Mattijs Korpershoek
2026-10-27 13:00 ` [PATCH v4 2/2] phy: qcom-snps-femto-v2: Add support for SA8255P Mattijs Korpershoek
2026-10-27 13:00 ` Mattijs Korpershoek
2026-11-13 10:21 ` Mattijs Korpershoek
2026-11-13 10:21 ` Mattijs Korpershoek
2026-11-15 19:39 ` [PATCH v4 0/2] Add support for SA8255P in the phy-qcom-snps-femto-v2 phy driver Manivannan Sadhasivam
2026-11-15 19:39 ` Manivannan Sadhasivam
2026-11-19 13:45 ` Vinod Koul [this message]
2026-11-19 13:45 ` Vinod Koul
2026-11-20 10:30 ` Mattijs Korpershoek
2026-11-20 10:30 ` Mattijs Korpershoek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=av79X0gPyQDXgZwR@parshuram \
--to=vkoul@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mani@kernel.org \
--cc=mkorpershoek@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=quic_sriramd@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.