All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v6 0/5] dmaengine: arm-dma350: Add slave support and Sky1 integration
@ 2026-11-06  1:34 Jelly Jia
  2026-11-06  1:34 ` [PATCH v6 1/5] dmaengine: arm-dma350: Fix source trigger bit Jelly Jia
                   ` (4 more replies)
  0 siblings, 5 replies; 12+ messages in thread
From: Jelly Jia @ 2026-11-06  1:34 UTC (permalink / raw)
  To: vkoul, robh, krzk+dt, conor+dt, robin.murphy
  Cc: devicetree, Frank.Li, cix-kernel-upstream, dmaengine,
	linux-arm-kernel, linux-kernel, Jelly.Jia

Hello,

This series adds scatter-gather and cyclic slave transfer support to the
Arm DMA-350 driver, then describes the clock, reset and DMA address view
of the CIX Sky1 FCH integration.

Patch 1 fixes the source-trigger bit. Patch 2 adds peripheral transfers
with descriptor-owned resource mappings, coherent linked commands and
hardware-based residue reporting. Patches 3 and 4 describe and handle
integration clocks and resets. Patch 5 describes the FCH DMA address
windows and adds its bus clock.

Sky1 controller nodes use cix,sky1-dma350 with an arm,dma-350 fallback.
The binding requires a bus clock for Sky1 and leaves its reset optional;
both resources remain optional for the generic compatible alone. The
driver uses standard optional resource helpers and introduces no
CIX-specific register programming. The companion AUDSS interrupt-path
series builds on this one and manages the AUDSS interrupt gates in the
CRU driver.

Changes since v5:
- Add the Sky1 compatible with a generic fallback and require clocks for
  Sky1 only. Keep resets optional and update the FCH node. (Frank.)
- Initialize the request to an invalid sentinel and clear request/config
  state when channel resources are freed, but retain it across terminate.
  (Sashiko, followed up by Frank.)
- Keep a failed channel in DMA_ERROR until termination, preventing queued
  work from overwriting the failed cookie's status and residue. Allow
  terminate to clear the error without an active descriptor.
  (Sashiko, followed up by Frank.)
- Add Frank's Reviewed-by to the unchanged clock/reset driver patch.

Previous version:
https://lore.kernel.org/r/20261104124411.296640-1-Jelly.Jia@cixtech.com

Jelly Jia (5):
  dmaengine: arm-dma350: Fix source trigger bit
  dmaengine: arm-dma350: Add slave and cyclic transfer support
  dt-bindings: dma: arm,dma-350: Describe the CIX Sky1 integration
  dmaengine: arm-dma350: Support integration clocks and resets
  arm64: dts: cix: Describe the Sky1 FCH DMA-350 integration

 .../devicetree/bindings/dma/arm,dma-350.yaml  |  30 +-
 arch/arm64/boot/dts/cix/sky1.dtsi             |  36 +-
 drivers/dma/arm-dma350.c                      | 837 +++++++++++++++++-
 3 files changed, 856 insertions(+), 47 deletions(-)


base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
-- 
2.54.0


^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2026-11-16 10:06 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-06  1:34 [PATCH v6 0/5] dmaengine: arm-dma350: Add slave support and Sky1 integration Jelly Jia
2026-11-06  1:34 ` [PATCH v6 1/5] dmaengine: arm-dma350: Fix source trigger bit Jelly Jia
2026-11-06  1:34 ` [PATCH v6 2/5] dmaengine: arm-dma350: Add slave and cyclic transfer support Jelly Jia
2026-11-12 20:34   ` Frank Li
2026-11-16 10:05     ` Jelly Jia
2026-11-06  1:34 ` [PATCH v6 3/5] dt-bindings: dma: arm,dma-350: Describe the CIX Sky1 integration Jelly Jia
2026-11-06  8:33   ` Krzysztof Kozlowski
2026-11-12 19:45   ` Frank Li
2026-11-06  1:34 ` [PATCH v6 4/5] dmaengine: arm-dma350: Support integration clocks and resets Jelly Jia
2026-11-12 20:35   ` Frank Li
2026-11-16 10:06     ` Jelly Jia
2026-11-06  1:34 ` [PATCH v6 5/5] arm64: dts: cix: Describe the Sky1 FCH DMA-350 integration Jelly Jia

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.