Re: [Freedreno] [PATCH] drm/msm/dsi: drop gdsc regulator handling

[abhinavk@codeaurora.org]

On 2021-06-30 17:00, Dmitry Baryshkov wrote:
> None of supported devies uses "gdsc" regulator for DSI. GDSC support is
> now implemented as a power domain. Drop old code and config handling
> gdsc regulator requesting and enabling.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/dsi/dsi_cfg.c  | 12 ++++--------
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 22 +++-------------------
>  2 files changed, 7 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
> b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
> index f3f1c03c7db9..32c37d7c2109 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
> @@ -32,9 +32,8 @@ static const char * const dsi_6g_bus_clk_names[] = {
>  static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
>  	.io_offset = DSI_6G_REG_SHIFT,
>  	.reg_cfg = {
> -		.num = 4,
> +		.num = 3,
>  		.regs = {
> -			{"gdsc", -1, -1},
>  			{"vdd", 150000, 100},	/* 3.0 V */
>  			{"vdda", 100000, 100},	/* 1.2 V */
>  			{"vddio", 100000, 100},	/* 1.8 V */
> @@ -53,9 +52,8 @@ static const char * const dsi_8916_bus_clk_names[] = 
> {
>  static const struct msm_dsi_config msm8916_dsi_cfg = {
>  	.io_offset = DSI_6G_REG_SHIFT,
>  	.reg_cfg = {
> -		.num = 3,
> +		.num = 2,
>  		.regs = {
> -			{"gdsc", -1, -1},
>  			{"vdda", 100000, 100},	/* 1.2 V */
>  			{"vddio", 100000, 100},	/* 1.8 V */
>  		},
> @@ -73,9 +71,8 @@ static const char * const dsi_8976_bus_clk_names[] = 
> {
>  static const struct msm_dsi_config msm8976_dsi_cfg = {
>  	.io_offset = DSI_6G_REG_SHIFT,
>  	.reg_cfg = {
> -		.num = 3,
> +		.num = 2,
>  		.regs = {
> -			{"gdsc", -1, -1},
>  			{"vdda", 100000, 100},	/* 1.2 V */
>  			{"vddio", 100000, 100},	/* 1.8 V */
>  		},
> @@ -89,9 +86,8 @@ static const struct msm_dsi_config msm8976_dsi_cfg = 
> {
>  static const struct msm_dsi_config msm8994_dsi_cfg = {
>  	.io_offset = DSI_6G_REG_SHIFT,
>  	.reg_cfg = {
> -		.num = 7,
> +		.num = 6,
>  		.regs = {
> -			{"gdsc", -1, -1},
>  			{"vdda", 100000, 100},	/* 1.25 V */
>  			{"vddio", 100000, 100},	/* 1.8 V */
>  			{"vcca", 10000, 100},	/* 1.0 V */
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
> b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index ed504fe5074f..66c425d4159c 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -203,35 +203,22 @@ static const struct msm_dsi_cfg_handler 
> *dsi_get_config(
>  {
>  	const struct msm_dsi_cfg_handler *cfg_hnd = NULL;
>  	struct device *dev = &msm_host->pdev->dev;
> -	struct regulator *gdsc_reg;
>  	struct clk *ahb_clk;
>  	int ret;
>  	u32 major = 0, minor = 0;
> 
> -	gdsc_reg = regulator_get(dev, "gdsc");
> -	if (IS_ERR(gdsc_reg)) {
> -		pr_err("%s: cannot get gdsc\n", __func__);
> -		goto exit;
> -	}
> -
>  	ahb_clk = msm_clk_get(msm_host->pdev, "iface");
>  	if (IS_ERR(ahb_clk)) {
>  		pr_err("%s: cannot get interface clock\n", __func__);
> -		goto put_gdsc;
> +		goto exit;
>  	}
> 
>  	pm_runtime_get_sync(dev);
> 
> -	ret = regulator_enable(gdsc_reg);
> -	if (ret) {
> -		pr_err("%s: unable to enable gdsc\n", __func__);
> -		goto put_gdsc;
> -	}
> -
>  	ret = clk_prepare_enable(ahb_clk);
>  	if (ret) {
>  		pr_err("%s: unable to enable ahb_clk\n", __func__);
> -		goto disable_gdsc;
> +		goto runtime_put;
>  	}
> 
>  	ret = dsi_get_version(msm_host->ctrl_base, &major, &minor);
> @@ -246,11 +233,8 @@ static const struct msm_dsi_cfg_handler 
> *dsi_get_config(
> 
>  disable_clks:
>  	clk_disable_unprepare(ahb_clk);
> -disable_gdsc:
> -	regulator_disable(gdsc_reg);
> +runtime_put:
>  	pm_runtime_put_sync(dev);
> -put_gdsc:
> -	regulator_put(gdsc_reg);
>  exit:
>  	return cfg_hnd;
>  }