From: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
To: Roger Quadros <rogerq@kernel.org>,
Andrejs Cainikovs <andrejs.cainikovs@gmail.com>,
Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Aswath Govindraju <a-govindraju@ti.com>,
Sjoerd Simons <sjoerd@collabora.com>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, "Bin Liu [EP]" <b-liu@ti.com>,
"Gunasekaran, Ravi" <r-gunasekaran@ti.com>
Subject: Re: [PATCH v1] arm64: dts: ti: k3-am62-main: disable usb lpm
Date: Wed, 14 Feb 2024 10:46:01 +0100 [thread overview]
Message-ID: <b27e4519-a9fc-43bb-be6b-35d69d65755d@toradex.com> (raw)
In-Reply-To: <2629cd30-23aa-4f03-8452-ae13297fd6b6@kernel.org>
On 12/02/2024 13:13, Roger Quadros wrote:
> Hi Andrejs,
>
> On 09/02/2024 15:02, Andrejs Cainikovs wrote:
>> From: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
>>
>> AM62 USB works with some devices, while failing to operate with others.
>
> Could you please share which devices failed to work for you?
Hi Roger,
This USB memory stick is the one that is failing most of the time:
ID 058f:6387 Alcor Micro Corp. Flash Drive (DigiKey 1GB)
I used following test to reproduce the issue: boot without any devices
connected, once booted - connect to PC for gadget mode (RNDIS), and then
unplug cable and connect USB drive.
I did not had any failures with this USB memory stick, btw:
ID 0951:1643 Kingston Technology DataTraveler G3
/Andrejs
>>
>> [ 560.189822] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
>> [ 560.195631] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
>> [ 574.388509] xhci-hcd xhci-hcd.4.auto: can't setup: -110
>> [ 574.393814] xhci-hcd xhci-hcd.4.auto: USB bus 2 deregistered
>> [ 574.399544] xhci-hcd: probe of xhci-hcd.4.auto failed with error -110
>>
>> This seems to be related to LPM (Link Power Management), and disabling it
>> turns USB into reliable working state.
>>
>> As per AM62 reference manual:
>>
>>> 4.8.2.1 USB2SS Unsupported Features
>>>
>>> The following features are not supported on this family of devices:
>>> ...
>>> - USB 2.0 ECN: Link Power Management (LPM)
>>> ...
>>
>> Fixes: 2240f96cf3cd ("arm64: dts: ti: k3-am62-main: Add support for USB")
>> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
>> ---
>> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>> index 464b7565d085..c49fbce5cb70 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>> @@ -640,6 +640,8 @@ usb0: usb@31000000 {
>> interrupt-names = "host", "peripheral";
>> maximum-speed = "high-speed";
>> dr_mode = "otg";
>> + snps,usb2-gadget-lpm-disable;
>> + snps,usb2-lpm-disable;
>> };
>> };
>>
>> @@ -663,6 +665,8 @@ usb1: usb@31100000 {
>> interrupt-names = "host", "peripheral";
>> maximum-speed = "high-speed";
>> dr_mode = "otg";
>> + snps,usb2-gadget-lpm-disable;
>> + snps,usb2-lpm-disable;
>> };
>> };
>>
>
> Instead of this could you please check if this series fixes the issue for you?
> https://lore.kernel.org/all/20240205141221.56076-1-rogerq@kernel.org/
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
To: Roger Quadros <rogerq@kernel.org>,
Andrejs Cainikovs <andrejs.cainikovs@gmail.com>,
Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Aswath Govindraju <a-govindraju@ti.com>,
Sjoerd Simons <sjoerd@collabora.com>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, "Bin Liu [EP]" <b-liu@ti.com>,
"Gunasekaran, Ravi" <r-gunasekaran@ti.com>
Subject: Re: [PATCH v1] arm64: dts: ti: k3-am62-main: disable usb lpm
Date: Wed, 14 Feb 2024 10:46:01 +0100 [thread overview]
Message-ID: <b27e4519-a9fc-43bb-be6b-35d69d65755d@toradex.com> (raw)
In-Reply-To: <2629cd30-23aa-4f03-8452-ae13297fd6b6@kernel.org>
On 12/02/2024 13:13, Roger Quadros wrote:
> Hi Andrejs,
>
> On 09/02/2024 15:02, Andrejs Cainikovs wrote:
>> From: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
>>
>> AM62 USB works with some devices, while failing to operate with others.
>
> Could you please share which devices failed to work for you?
Hi Roger,
This USB memory stick is the one that is failing most of the time:
ID 058f:6387 Alcor Micro Corp. Flash Drive (DigiKey 1GB)
I used following test to reproduce the issue: boot without any devices
connected, once booted - connect to PC for gadget mode (RNDIS), and then
unplug cable and connect USB drive.
I did not had any failures with this USB memory stick, btw:
ID 0951:1643 Kingston Technology DataTraveler G3
/Andrejs
>>
>> [ 560.189822] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
>> [ 560.195631] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
>> [ 574.388509] xhci-hcd xhci-hcd.4.auto: can't setup: -110
>> [ 574.393814] xhci-hcd xhci-hcd.4.auto: USB bus 2 deregistered
>> [ 574.399544] xhci-hcd: probe of xhci-hcd.4.auto failed with error -110
>>
>> This seems to be related to LPM (Link Power Management), and disabling it
>> turns USB into reliable working state.
>>
>> As per AM62 reference manual:
>>
>>> 4.8.2.1 USB2SS Unsupported Features
>>>
>>> The following features are not supported on this family of devices:
>>> ...
>>> - USB 2.0 ECN: Link Power Management (LPM)
>>> ...
>>
>> Fixes: 2240f96cf3cd ("arm64: dts: ti: k3-am62-main: Add support for USB")
>> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
>> ---
>> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>> index 464b7565d085..c49fbce5cb70 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>> @@ -640,6 +640,8 @@ usb0: usb@31000000 {
>> interrupt-names = "host", "peripheral";
>> maximum-speed = "high-speed";
>> dr_mode = "otg";
>> + snps,usb2-gadget-lpm-disable;
>> + snps,usb2-lpm-disable;
>> };
>> };
>>
>> @@ -663,6 +665,8 @@ usb1: usb@31100000 {
>> interrupt-names = "host", "peripheral";
>> maximum-speed = "high-speed";
>> dr_mode = "otg";
>> + snps,usb2-gadget-lpm-disable;
>> + snps,usb2-lpm-disable;
>> };
>> };
>>
>
> Instead of this could you please check if this series fixes the issue for you?
> https://lore.kernel.org/all/20240205141221.56076-1-rogerq@kernel.org/
>
next prev parent reply other threads:[~2024-02-14 9:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-09 13:02 [PATCH v1] arm64: dts: ti: k3-am62-main: disable usb lpm Andrejs Cainikovs
2024-02-09 13:02 ` Andrejs Cainikovs
2024-02-12 12:13 ` Roger Quadros
2024-02-12 12:13 ` Roger Quadros
2024-02-12 12:54 ` Francesco Dolcini
2024-02-12 12:54 ` Francesco Dolcini
2024-02-13 11:34 ` Roger Quadros
2024-02-13 11:34 ` Roger Quadros
2024-02-14 9:46 ` Andrejs Cainikovs [this message]
2024-02-14 9:46 ` Andrejs Cainikovs
2024-02-13 11:43 ` Francesco Dolcini
2024-02-13 11:43 ` Francesco Dolcini
2024-02-14 9:25 ` Roger Quadros
2024-02-14 9:25 ` Roger Quadros
2024-02-15 9:45 ` Vignesh Raghavendra
2024-02-15 9:45 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b27e4519-a9fc-43bb-be6b-35d69d65755d@toradex.com \
--to=andrejs.cainikovs@toradex.com \
--cc=a-govindraju@ti.com \
--cc=andrejs.cainikovs@gmail.com \
--cc=b-liu@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=r-gunasekaran@ti.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@kernel.org \
--cc=sjoerd@collabora.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.