Re: [PATCH 00/16] e1000 base code update

[Ferruh Yigit <ferruh.yigit@intel.com>]

Hi Wenzhuo,

On 11/23/2016 5:22 PM, Wenzhuo Lu wrote:
> Updated e1000 base code to fix several bugs and support
> i219 NICs.
> 
> Wenzhuo Lu (16):
>   e1000/base: increased ULP timer
>   e1000/base: increase PHY PLL clock gate timing
>   e1000/base: try more times to get HW mailbox lock
>   e1000/base: add getting HW version support for i354
>   e1000/base: expose e1000_write_vfta_i350
>   e1000/base: add max RX jumbo frame define
>   e1000/base: restore link speed after ULP exit
>   e1000/base: clear ULP configuration register on ULP exit
>   e1000/base: increase LANPHYPC low duration
>   e1000/base: workaround for ULP entry flow
>   e1000/base: enable new i219 devices
>   e1000/base: always request clock during K1 at 1G link speed
>   e1000/base: ability to force K1-off disabled
>   e1000/base: support more i219 devices
>   e1000/base: update readme
>   e1000: add new i219 devices
> 
>  drivers/net/e1000/base/README          |   4 +-
>  drivers/net/e1000/base/e1000_82575.c   |   1 -
>  drivers/net/e1000/base/e1000_82575.h   |   1 +
>  drivers/net/e1000/base/e1000_api.c     |  19 +
>  drivers/net/e1000/base/e1000_defines.h |   9 +
>  drivers/net/e1000/base/e1000_hw.h      |  21 +-
>  drivers/net/e1000/base/e1000_ich8lan.c | 865 +++++++++++++++++++++++++++++++--
>  drivers/net/e1000/base/e1000_ich8lan.h |  21 +-
>  drivers/net/e1000/base/e1000_mbx.c     |  36 +-
>  drivers/net/e1000/base/e1000_nvm.c     |   1 +
>  drivers/net/e1000/base/e1000_regs.h    |   7 +
>  drivers/net/e1000/em_ethdev.c          |  34 +-
>  12 files changed, 949 insertions(+), 70 deletions(-)
> 

Based on this pathset.

Can you also please send another patch to:
1- add I219 to supported nics list
2- announce new supported nic in release notes.

Also as far as I can see there is no igb/e1000 documentation under
doc/guides/nics/*, it can good to provide one, not with above requested
patches perhaps, but in some suitable time.

Thanks,
ferruh