From: Chris Wilson <chris@chris-wilson.co.uk>
To: Knut Petersen <Knut_Petersen@t-online.de>, airlied@linux.ie
Cc: eric@anholt.net, jesse.barnes@intel.com,
Linus Torvalds <torvalds@linux-foundation.org>,
linux-kernel@vger.kernel.org,
intel-gfx <intel-gfx@lists.freedesktop.org>,
gregkh@suse.de
Subject: Re: [PATCH] Fix i915 drm regression on AOpen i915GMm-HFS motherboard
Date: Mon, 03 Jan 2011 14:54:53 +0000 [thread overview]
Message-ID: <b7da2f$q1ffv6@fmsmga001.fm.intel.com> (raw)
In-Reply-To: <4D21DC41.8070408@t-online.de>
On Mon, 03 Jan 2011 15:25:05 +0100, Knut Petersen <Knut_Petersen@t-online.de> wrote:
> The AOpen i915GMm-HFS is a desktop motherboard for the Intel Pentium M.
> A mobile chipset is used
> (Intel 915GM / ICH6-M). Kernel 2.6.31.14 works fine for that mobo, but
> from 2.6.32 on graphics support
> is broken because the i915 driver "detects" an lvds device with a
> resolution of 1024x768 pixels that in reality
> is not present. Unfortunately the driver assumes that the "detected"
> lvds is the primary screen and uses the
> wrong resolution also for the real VGA and DVI connectors.
Can you try:
diff --git a/drivers/gpu/drm/i915/intel_i2c.c
b/drivers/gpu/drm/i915/intel_i2c.c
index 58040f6..111128d 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -384,7 +384,7 @@ int intel_setup_gmbus(struct drm_device *dev)
bus->reg0 = i | GMBUS_RATE_100KHZ;
/* XXX force bit banging until GMBUS is fully debugged */
- bus->force_bit = intel_gpio_create(dev_priv, i);
+ //bus->force_bit = intel_gpio_create(dev_priv, i);
}
intel_i2c_reset(dev_priv->dev);
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
WARNING: multiple messages have this Message-ID (diff)
From: Chris Wilson <chris@chris-wilson.co.uk>
To: Knut Petersen <Knut_Petersen@t-online.de>, airlied@linux.ie
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>,
gregkh@suse.de, linux-kernel@vger.kernel.org,
jesse.barnes@intel.com,
Linus Torvalds <torvalds@linux-foundation.org>
Subject: Re: [PATCH] Fix i915 drm regression on AOpen i915GMm-HFS motherboard
Date: Mon, 03 Jan 2011 14:54:53 +0000 [thread overview]
Message-ID: <b7da2f$q1ffv6@fmsmga001.fm.intel.com> (raw)
In-Reply-To: <4D21DC41.8070408@t-online.de>
On Mon, 03 Jan 2011 15:25:05 +0100, Knut Petersen <Knut_Petersen@t-online.de> wrote:
> The AOpen i915GMm-HFS is a desktop motherboard for the Intel Pentium M.
> A mobile chipset is used
> (Intel 915GM / ICH6-M). Kernel 2.6.31.14 works fine for that mobo, but
> from 2.6.32 on graphics support
> is broken because the i915 driver "detects" an lvds device with a
> resolution of 1024x768 pixels that in reality
> is not present. Unfortunately the driver assumes that the "detected"
> lvds is the primary screen and uses the
> wrong resolution also for the real VGA and DVI connectors.
Can you try:
diff --git a/drivers/gpu/drm/i915/intel_i2c.c
b/drivers/gpu/drm/i915/intel_i2c.c
index 58040f6..111128d 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -384,7 +384,7 @@ int intel_setup_gmbus(struct drm_device *dev)
bus->reg0 = i | GMBUS_RATE_100KHZ;
/* XXX force bit banging until GMBUS is fully debugged */
- bus->force_bit = intel_gpio_create(dev_priv, i);
+ //bus->force_bit = intel_gpio_create(dev_priv, i);
}
intel_i2c_reset(dev_priv->dev);
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
next prev parent reply other threads:[~2011-01-03 14:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-03 14:25 [PATCH] Fix i915 drm regression on AOpen i915GMm-HFS motherboard Knut Petersen
2011-01-03 14:54 ` Chris Wilson [this message]
2011-01-03 14:54 ` Chris Wilson
2011-01-03 18:12 ` Knut Petersen
2011-01-03 19:45 ` Linus Torvalds
2011-01-03 19:59 ` Chris Wilson
2011-01-03 20:26 ` Linus Torvalds
2012-04-04 16:23 ` Jean Delvare
2011-01-03 23:09 ` Knut Petersen
2011-01-03 23:22 ` Chris Wilson
2011-01-04 0:35 ` Knut Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='b7da2f$q1ffv6@fmsmga001.fm.intel.com' \
--to=chris@chris-wilson.co.uk \
--cc=Knut_Petersen@t-online.de \
--cc=airlied@linux.ie \
--cc=eric@anholt.net \
--cc=gregkh@suse.de \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jesse.barnes@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.