All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: "Oleksij Rempel" <o.rempel@pengutronix.de>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Jérôme Pouiller" <jerome.pouiller@silabs.com>
Cc: <kernel@pengutronix.de>, <linux-kernel@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4 0/4] mainline Protonic PRTT1x boards
Date: Mon, 2 May 2022 10:40:59 +0200	[thread overview]
Message-ID: <b86e02aa-ecee-b159-e4c7-b562afefb0ed@foss.st.com> (raw)
In-Reply-To: <20220426073511.1160119-1-o.rempel@pengutronix.de>

Hi Oleksij

On 4/26/22 09:35, Oleksij Rempel wrote:
> changes v4:
> - reorder prtt1X compatible again
> - remove spaces in stm32mp151a-prtt1c.dts
> 
> changes v3:
> - add silabs,wfx compatible
> - move spi pin configuration to stm32mp15-pinctrl.dtsi
> - move prtt1X compatible in alphabetical order
> - add watchdog and thermal nodes
> 
> changes v2:
> - cleanup mmc nodes
> - disabled dma for uart4 (this is console interface and it should work
>    as simple as possible)
> 
> Oleksij Rempel (4):
>    dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
>      boards
>    dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
>    ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
>    ARM: dts: stm32: add support for Protonic PRTT1x boards
> 
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |   8 +
>   .../staging/net/wireless/silabs,wfx.yaml      |   1 +
>   arch/arm/boot/dts/Makefile                    |   3 +
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      |  15 +
>   arch/arm/boot/dts/stm32mp151a-prtt1a.dts      |  52 +++
>   arch/arm/boot/dts/stm32mp151a-prtt1c.dts      | 304 ++++++++++++++++++
>   arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi     | 229 +++++++++++++
>   arch/arm/boot/dts/stm32mp151a-prtt1s.dts      |  63 ++++
>   8 files changed, 675 insertions(+)
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts
> 

Series applied on stm32-next.

Regards
Alex

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: "Oleksij Rempel" <o.rempel@pengutronix.de>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Jérôme Pouiller" <jerome.pouiller@silabs.com>
Cc: <kernel@pengutronix.de>, <linux-kernel@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4 0/4] mainline Protonic PRTT1x boards
Date: Mon, 2 May 2022 10:40:59 +0200	[thread overview]
Message-ID: <b86e02aa-ecee-b159-e4c7-b562afefb0ed@foss.st.com> (raw)
In-Reply-To: <20220426073511.1160119-1-o.rempel@pengutronix.de>

Hi Oleksij

On 4/26/22 09:35, Oleksij Rempel wrote:
> changes v4:
> - reorder prtt1X compatible again
> - remove spaces in stm32mp151a-prtt1c.dts
> 
> changes v3:
> - add silabs,wfx compatible
> - move spi pin configuration to stm32mp15-pinctrl.dtsi
> - move prtt1X compatible in alphabetical order
> - add watchdog and thermal nodes
> 
> changes v2:
> - cleanup mmc nodes
> - disabled dma for uart4 (this is console interface and it should work
>    as simple as possible)
> 
> Oleksij Rempel (4):
>    dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
>      boards
>    dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
>    ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
>    ARM: dts: stm32: add support for Protonic PRTT1x boards
> 
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |   8 +
>   .../staging/net/wireless/silabs,wfx.yaml      |   1 +
>   arch/arm/boot/dts/Makefile                    |   3 +
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      |  15 +
>   arch/arm/boot/dts/stm32mp151a-prtt1a.dts      |  52 +++
>   arch/arm/boot/dts/stm32mp151a-prtt1c.dts      | 304 ++++++++++++++++++
>   arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi     | 229 +++++++++++++
>   arch/arm/boot/dts/stm32mp151a-prtt1s.dts      |  63 ++++
>   8 files changed, 675 insertions(+)
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts
> 

Series applied on stm32-next.

Regards
Alex

  parent reply	other threads:[~2022-05-02  8:42 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-26  7:35 [PATCH v4 0/4] mainline Protonic PRTT1x boards Oleksij Rempel
2022-04-26  7:35 ` Oleksij Rempel
2022-04-26  7:35 ` [PATCH v4 1/4] dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards Oleksij Rempel
2022-04-26  7:35   ` Oleksij Rempel
2022-04-28  7:52   ` Krzysztof Kozlowski
2022-04-28  7:52     ` Krzysztof Kozlowski
2022-04-26  7:35 ` [PATCH v4 2/4] dt-bindings: net: silabs, wfx: add prt, prtt1c-wfm200 antenna variant Oleksij Rempel
2022-04-26  7:35   ` [PATCH v4 2/4] dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 " Oleksij Rempel
2022-04-28  7:52   ` Krzysztof Kozlowski
2022-04-28  7:52     ` Krzysztof Kozlowski
2022-04-26  7:35 ` [PATCH v4 3/4] ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group Oleksij Rempel
2022-04-26  7:35   ` Oleksij Rempel
2022-04-26  7:35 ` [PATCH v4 4/4] ARM: dts: stm32: add support for Protonic PRTT1x boards Oleksij Rempel
2022-04-26  7:35   ` Oleksij Rempel
2022-05-02  8:40 ` Alexandre TORGUE [this message]
2022-05-02  8:40   ` [PATCH v4 0/4] mainline " Alexandre TORGUE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b86e02aa-ecee-b159-e4c7-b562afefb0ed@foss.st.com \
    --to=alexandre.torgue@foss.st.com \
    --cc=jerome.pouiller@silabs.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=o.rempel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.